Template:Networking rutos manual lan: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
  | series = {{{series}}}
  | series = {{{series}}}
| name  = {{{name}}}
  }}
  }}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Administration (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} LAN (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Administration (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} LAN (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==


Line 12: Line 15:
This manual page provides an overview of the LAN windows in {{{name}}} devices.
This manual page provides an overview of the LAN windows in {{{name}}} devices.


==LAN Configuration==
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = {{{series}}}
}}
 
==LAN==
 
The <b>LAN</b> section displays LAN interfaces currently existing on this device.


The <b>LAN Configuration</b> section displays LAN interfaces currently existing on this device.
[[File:Networking_rutos_manual_lan_settings_v3.png|border|class=tlt-border]]


{{#ifeq: {{{series}}} | TRB1
If you hover mouse over the question mark [[File:Networking_rutos_manual_wan_question_mark.png]] global IPv6 prefix assignment addresses will be displayed.
| [[File:Networking_trb14x_manual_lan_settings_v1.png|border|class=tlt-border]]
 
| [[File:Networking_rutos_manual_lan_settings_v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_lan_question_mark_info.png|border|class=tlt-border]]
}}
 
The <b>Add New Instance</b> section is used to create additional network interfaces. To create a new interface, simply enter a custom name for it and click the 'Add' button.
 
[[File:Networking_rutos_manual_interfaces_add_interface_v2.png|border|class=tlt-border]]


To begin configuring an interface, click the 'Edit' button on the right side of the interface:
To begin configuring an interface, click the 'Edit' button on the right side of the interface:


{{#ifeq: {{{series}}} | TRB1
[[File:Networking_rutos_manual_lan_begin_to_edit_v3.png|border|class=tlt-border]]
| [[File:Networking_trb14x_manual_lan_begin_to_edit_v1.png]]
| [[File:Networking_rutos_manual_lan_begin_to_edit_v1.png]]
}}


===General Setup===
===Interface configuration===
----
----
The <b>General Setup</b> section is used to configure the main parameters of LAN.
====General settings====
The <b>General Settings</b> section is used to configure the main parameters of LAN.


{{#switch: {{{series}}}
[[File:Networking_rutos_manual_lan_general_settings.png|border|class=tlt-border]]
| TRB1 = [[File:Networking_trb14x_manual_lan_configuration_general_setup_v1.png|border|class=tlt-border]]
| TRB2 = [[File:Networking_trb24x_manual_lan_configuration_general_setup_v1.png|border|class=tlt-border]]
| #default = [[File:Networking_rutos_manual_lan_configuration_general_setup_v1.png|border|class=tlt-border]]
}}


<table class="nd-mantable">
<table class="nd-mantable">
Line 43: Line 49:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
        <tr>
      <td>Enable</td>
      <td>off | on; default: <b>on</b></td>
      <td>Enable interface</td>
    </tr>
        <tr>
      <td>Protocol</td>
      <td>Static | None; default: <b>Static</b></td>
      <td></td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>IPv4 address</td>
       <td>IPv4 address</td>
       <td>ip4; default: <b>{{#ifeq:{{{series}}}|TRB1|192.168.2.1|192.168.1.1}}</b></td>
       <td>ip4; default: <b>192.168.1.1</b></td>
       <td>The IPv4 address interface of this interface. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
       <td>Your router's address on the network </td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 53: Line 69:
       <td>netmask; default: <b>255.255.255.0</b></td>
       <td>netmask; default: <b>255.255.255.0</b></td>
       <td>The IPv4 netmask of this interface. A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.</td>
       <td>The IPv4 netmask of this interface. A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.</td>
    </tr>
    <tr>
      <td>IPv4 gateway</td>
      <td>ip4; default: none</td>
      <td>The IPv4 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.</td>
    </tr>
    <tr>
      <td>DNS servers</td>
      <td>ip4; default: <b>none</b></td>
      <td>DNS server addresses that this interface will use. If left empty, DNS servers are assigned automatically. To see what DNS servers are currently used, you can check the contents of the <i>/tmp/resolv.conf.auto</i> file.</td>
     </tr>
     </tr>
{{#ifeq:{{{LAN_to_WAN}}}| 1 |
{{#ifeq:{{{LAN_to_WAN}}}| 1 |
Line 72: Line 78:
|}}
|}}
</table>
</table>
====IPV6 settings====
The <b>IPV6 settings</b> section is used to configure the IPv6 parameters of LAN.


===DHCP Server===
[[File:Networking_rutos_manual_lan_ipv6_settings.png|border|class=tlt-border]]
----
A <b>DHCP</b> (<b>Dynamic Host Configuration Protocol</b>) server is a service that can automatically configure the TCP/IP settings of any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the private network.


[[File:Networking_rutx_manual_lan_static_dhcp_server_scheme_v1.png]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
        <tr>
      <td>Delegate IPv6 prefixes</td>
      <td>off | on; default: <b>on</b></td>
      <td>Enable downstream delegation of IPv6 prefixes available on this interface.</td>
    </tr>
    <tr>
      <td>IPv6 assignment length</td>
      <td>Disabled | 64 | Custom - integer [0..6]; default: <b>60</b></td>
      <td>Assign a part of given length of every public IPv6-prefix to this interface.</td>
    </tr>
    <tr>
      <td>IPv6 assignment hint</td>
      <td>A hexadecimal string of symbols: a-f, A-F and 0-9 is accepted; default: <b>none</b></td>
      <td>Assign prefix parts using this hexadecimal subprefix ID for this interface.</td>
    </tr>
        <tr>
      <td>IPv6 suffix</td>
      <td>Allowed values: "eui64", "random", fixed value like "::1" or "::1:2"; default: <b>none</b></td>
      <td>Optional. Allowed values: 'eui64', 'random', fixed value like '::1' or '::1:2'. When IPv6 prefix (like 'a:b:c:d::') is received from a delegating server, use the suffix (like '::1') to form the IPv6 address ('a:b:c:d::1') for the interface.</td>
    </tr>
</table>
====Advanced settings====
The <b>Advanced settings</b> section is used to configure the advanced parameters of LAN.


{{#ifeq: {{{series}}} | TRB1
[[File:Networking_rutos_manual_lan_advanced_settings.png|border|class=tlt-border]]
| [[File:Networking_trb14x_manual_lan_configuration_dhcp_server_general_setup_v1.png|border|class=tlt-border]]
| [[File:Networking_rutos_manual_lan_configuration_dhcp_server_general_setup_v1.png|border|class=tlt-border]]
}}


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <th>Field</th>
        <th>Value</th>
      <th>Value</th>
        <th>Description</th>
      <th>Description</th>
    </tr>
        <tr>
      <td>Force link</td>
      <td>off | on; default: <b>on</b></td>
      <td>Set interface properties regardless of the link carrier (If set, carrier sense events do not invoke hotplug handlers).</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Enable DHCP</td>
      <td>Use gateway metric</td>
        <td>Enable | Disable | DHCP Relay<span class="asterisk">*</span>; default: <b>Enable</b></td>
      <td>integer[0..4294967295]; default: <b>0</b></td>
        <td>Turns the DHCP server on or off or enables DHCP relay<span class="asterisk">*</span>.<br>If DHCP Relay<span class="asterisk">*</span> is selected, you will be prompted to enter an IP address of another DHCP server in your LAN. In this case, whenever a new machine connects to this device, it will redirect any DHCP requests to the specified DHCP Server.</td>
      <td>The configuration by default generates a routing table entry. In this field you can alter the metric of that entry. Lower metric means higher priority.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Start</td>
      <td>Override MAC address</td>
        <td>integer [1..255]; default: <b>100</b></td>
      <td>Mac address of six groups of two hexadecimal digits are accepted. E.g. 00:23:45:67:89:AB; default: <b>none</b></td>
        <td>The starting IP address value. e.g., if your device’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
      <td>Override MAC address of the interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your router). In this field you can select your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer. You can select the MAC address of a currently connected computer, or use a custom one. When changing MAC address on LAN interface be careful to avoid MAC address collisions.</td>
     </tr>
     </tr>
        <tr>
      <td>Override MTU</td>
      <td>integer [98..65535]; default: <b>none</b></td>
      <td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td>
    </tr>
        <tr>
      <td>IP4 table</td>
      <td>Value must be a valid unsigned integer; default: <b>none</b></td>
      <td>IPv4 routing table for routes of this interface.</td>
    </tr>
</table>
====Physical settings====
The <b>Physical settings</b> section is used to configure the physical parameters of LAN.
[[File:Networking_rutos_manual_lan_physical_settings.png|border|class=tlt-border]]
<table class="nd-mantable">
     <tr>
     <tr>
         <td>Limit</td>
         <th>Field</th>
        <td>integer [1..255]; default: <b>150</b></td>
      <th>Value</th>
         <td>How many addresses the DHCP server can lease out. Continuing from the example above: if the start address is 192.168.1.100 and the server can lease out 150 addresses, available addresses will be from 192.168.1.<b>100</b> to 192.168.1.<b>249</b> (<i>100 + 150 – 1 = 249</i>; this is because the first address is inclusive).</td>
      <th>Description</th>
    </tr>
         <tr>
      <td>Bridge interfaces</td>
      <td>off | on; default: <b>on</b></td>
      <td>Creates a bridge over specified interface(s).</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Lease time</td>
      <td>Enable STP</td>
        <td>integer [1..999999]; default: <b>12</b></br>integer [2..999999]<span class="asterisk">*</span></br>integer [120..999999]<span class="asterisk">**</span></td>
      <td>off | on; default: <b>off</b></td>
        <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</br><span class="asterisk">*</span>If selected Units is Minutes.</br><span class="asterisk">**</span>If selected Units is seconds.</td>
      <td>Enables the Spanning Tree Protocol on this bridge.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Units</td>
      <td>Enable IGMP</td>
        <td>Hours | Minutes | Seconds; default: <b>Hours</b></td>
      <td>off | on; default: <b>off</b></td>
         <td>Lease time measurement units.</td>
      <td>Enables IGMP snooping on this bridge.</td>
    </tr>
         <tr>
      <td>Interface</td>
      <td>network interface(s); default: <b>lan physical interface</b></td>
      <td>Physical interface name to assign to this section, list of interfaces if type bridge is set.</td>
     </tr>
     </tr>
</table>
</table>
====Firewall settings====
The <b>Firewall settings</b> section is used to configure the firewall parameters of LAN.


<span class="asterisk">*</span> When an interface is set to act as a DHCP Relay, it redirects all received DHCP request messages to another specified DHCP server:
[[File:Networking_rutos_manual_lan_firewall_settings.png|border|class=tlt-border]]


[[File:Networking_rutx_manual_lan_static_dhcp_server_relay_scheme_v2.png]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
        <tr>
      <td>Create / Assign firewall-zone</td>
      <td>firewall zone; default: <b>lan</b></td>
      <td>Choose the firewall zone you want to assign to this interface. Select 'Unspecified' to remove the interface from the associated zone or define a new zone and attach the interface to it.</td>
    </tr>
</table>


[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]

Latest revision as of 13:30, 4 October 2024

The information in this page is updated in accordance with firmware version .


Summary

The LAN page is used to create and set up local area network interfaces.

This manual page provides an overview of the LAN windows in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

LAN

The LAN section displays LAN interfaces currently existing on this device.

If you hover mouse over the question mark global IPv6 prefix assignment addresses will be displayed.

The Add New Instance section is used to create additional network interfaces. To create a new interface, simply enter a custom name for it and click the 'Add' button.

To begin configuring an interface, click the 'Edit' button on the right side of the interface:

Interface configuration

General settings

The General Settings section is used to configure the main parameters of LAN.

Field Value Description
Enable off | on; default: on Enable interface
Protocol Static | None; default: Static
IPv4 address ip4; default: 192.168.1.1 Your router's address on the network
IPv4 netmask netmask; default: 255.255.255.0 The IPv4 netmask of this interface. A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.

IPV6 settings

The IPV6 settings section is used to configure the IPv6 parameters of LAN.

Field Value Description
Delegate IPv6 prefixes off | on; default: on Enable downstream delegation of IPv6 prefixes available on this interface.
IPv6 assignment length Disabled | 64 | Custom - integer [0..6]; default: 60 Assign a part of given length of every public IPv6-prefix to this interface.
IPv6 assignment hint A hexadecimal string of symbols: a-f, A-F and 0-9 is accepted; default: none Assign prefix parts using this hexadecimal subprefix ID for this interface.
IPv6 suffix Allowed values: "eui64", "random", fixed value like "::1" or "::1:2"; default: none Optional. Allowed values: 'eui64', 'random', fixed value like '::1' or '::1:2'. When IPv6 prefix (like 'a:b:c:d::') is received from a delegating server, use the suffix (like '::1') to form the IPv6 address ('a:b:c:d::1') for the interface.

Advanced settings

The Advanced settings section is used to configure the advanced parameters of LAN.

Field Value Description
Force link off | on; default: on Set interface properties regardless of the link carrier (If set, carrier sense events do not invoke hotplug handlers).
Use gateway metric integer[0..4294967295]; default: 0 The configuration by default generates a routing table entry. In this field you can alter the metric of that entry. Lower metric means higher priority.
Override MAC address Mac address of six groups of two hexadecimal digits are accepted. E.g. 00:23:45:67:89:AB; default: none Override MAC address of the interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your router). In this field you can select your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer. You can select the MAC address of a currently connected computer, or use a custom one. When changing MAC address on LAN interface be careful to avoid MAC address collisions.
Override MTU integer [98..65535]; default: none Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.
IP4 table Value must be a valid unsigned integer; default: none IPv4 routing table for routes of this interface.

Physical settings

The Physical settings section is used to configure the physical parameters of LAN.

Field Value Description
Bridge interfaces off | on; default: on Creates a bridge over specified interface(s).
Enable STP off | on; default: off Enables the Spanning Tree Protocol on this bridge.
Enable IGMP off | on; default: off Enables IGMP snooping on this bridge.
Interface network interface(s); default: lan physical interface Physical interface name to assign to this section, list of interfaces if type bridge is set.

Firewall settings

The Firewall settings section is used to configure the firewall parameters of LAN.

Field Value Description
Create / Assign firewall-zone firewall zone; default: lan Choose the firewall zone you want to assign to this interface. Select 'Unspecified' to remove the interface from the associated zone or define a new zone and attach the interface to it.

[[Category:{{{name}}} Network section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_lan&oldid=133684"