RUT850 Mobile

Summary

The Mobile section is used to configure SIM card parameters, mobile data limits and network operators. This chapter is an overview of RUT850 routers' Mobile section.

General

The General Tab is used to configure SIM card parameters such as Service mode, Connection type, APN and more much more.

Mobile Configuration

Field name	Value	Description
Mobile Configuration
Connection type	QMI | NCM | NDIS | PPP; Default: QMI	Defines how the router's modem will establish a connection to the ISP (Internet Service Provider) PPP uses a dialling number to establish a data connection QMI does not use dialling or the PPP protocol to establish data connection and it is usually faster than PPP mode NOTE: PPP connection type exists on all RUT devices, but QMI does not. If you have a RUT device with a Telit modem, QMI will be replaced by NCM. If your RUT device contains a Huawei modem, you will see NDIS instead of QMI. QMI connection type is available on RUT devices that use a Quectel modem (which is the standard modem for most RUT devices)
APN	string; Default: " "	An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network
PIN number	string; Default: " "	A personal identification number is a numeric password used to authenticate a user to a system
Dialing number	string; Default: " "	A Dialling number is used to establish a mobile PPP connection
Authentication method	CHAP | PAP | None; Default: None	The Authentication method that your GSM carrier uses to authenticate new connections on its network
Service mode	2G only | 3G only | 4G (LTE) only | Automatic; Default: Automatic	Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which type of network you wish to connect to, e.g., if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity
Deny data roaming	yes | no; Default: no	When enabled this function prevents the device from establishing mobile data connection while not in your home network
Mobile Data On Demand
Enable	yes | no; Default: no	Toggles Mobile Data On Demand ON or OFF. The Mobile Data On Demand function keeps the mobile data connection ON only when it is in use. NOTE: This function is only available whith PPP Connection type
No data timeout (sec)	integer [10..3600]; Default: 10	Mobile data connection will be terminated if no data is transferred during the timeout period specified in this field
Force LTE network
Enable	yes | no; Default: no	Toggles Force LTE network ON or OFF
Reregister	yes | no; Default: no	When enabled the modem will reregister before trying to connect to an LTE network
Timeout (sec)	integer [180..3600]; Default: 300	Time in seconds between attempts to connect to an LTE network

Network Operators

The Network Operators window provides you with the ability to scan, select and enter manual Network Operator codes. This function is a great utility when the router is used in roaming conditions.

Scan For Network Operators

Scan For Network Operators is a function that initiates a scan for available network operators in your area. To initiate a scan, press the Scan for operators button. After you do so you will be prompted with a pop-up asking you if you're really sure, since while the scan is in progress you will lose your data connection for approximately 2 minutes. To proceed click Ok.

After the scan is complete you will be provided with a list of operators similar to the one in the example above (except with the available operators from your area). The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not Forbidden.

Below the list is the scan button if you should choose to repeat the scan and the Connection mode box containing options on how you want the router to connect to network operators. The box contains three choices: Auto (default), Manual-Auto and Manual. Manual-auto let's you chose one operator that the router will always try to connect to, but if it can't complete the connection, it will connect to the next available operator. If you choose Manual-Auto, you will be prompted to enter the desired Operator's code. Most network operators' codes can be found online or you can initiate a scan for operators - if the operator you're looking for can be reached from your area, the list of available network operators will contain the desired operator's code.

Manual is similar to Manual-Auto, except with this option the router will always try to connect to the specified operator, even after unsuccessful connection attempts.

Operators List

The Operators List tab is used for creating a Blacklist or White list for undesired or desired operators.

Field name	Value	Description
Enable	yes {{!} no; Default: no	Enables the Operators List function
Mode	Blacklist | White list; Default: Blacklist	The type of list Blacklist - operators residing in the blacklist will considered forbidden and your router will not attempt to connect to them even if they are available White list - operators residing in the white list will be the only operators that the router will be trying to connect to. Other operators, that are not in the white list, will be considered forbidden
Name	string; Default: " "	Operator's name. Used only for easier management purposes
Operator code	integer; Default: " "	Operator's code. You can find network operator codes online or use the router's Scan for operators function described here

Be mindful when using the Operators List function as it very easy to block yourself from the right operators!

Mobile Data Limit

The Mobile Data Limit window provides you with the ability to set a data limit for your SIM card in order to protect yourself from unwanted data charges.

Field name	Value	Description
Data Connection Limit Configuration
Enable data connection limit	yes | no; Default: no	Toggles data limit ON or OFF
Data limit* (MB)	integer; Default: " "	The received data limit. After reaching the specified data limit, the router will kill your current mobile data connection
Period	Month | Week | Day; Default: Month	Period for which the data limit applies to
Start day | Start hour	day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: day 1	Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
SMS Warning Configuration
Enable SMS warning	yes | no; Default: no	Toggles SMS Warning ON or OFF. SMS Warning Configuration provides you with the ability to configure a rule that sends you an SMS message after the router reaches a specified amount of data.
Data limit* (MB)	integer; Default: " "	The received data limit. After reaching the specified data limit, the router will send out an SMS warning message to the specified phone number
Period	Month | Week | Day; Default: Month	Period for which the data limit applies to
Start day | Start hour	day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: day 1	Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
Phone number	phone number; Default: " "	Recipient's phone number

*Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur

Clear Data Limit

The Clear Data Limit section contains only one button - the Clear data limit button, which resets the configured data limits.

Remember that the Clear data limit button doesn't clear the actual SIM used data counter, only the received data counters of the router!