505
edits
Changes
→Configuration on RUT2 device
[[File:Vxlan over mobile vxlan settings.png|border|class=tlt-border]]
[[File:Vxlan over mobile vxlan settings.png|border|class=tlt-border]]
==Configuration testing==
The best way to test the configuration after setting up VXLAN between the routers is to ping between devices on either side of the routers using their LAN IPs and check the ARP tables. This ensures that devices on the same LAN segment can communicate over the Layer 2 (L2) network through the routers.
Configuration testing from RUT1 side:
[[File:Vxlan ping rut1 to rut2.png|border|class=tlt-border]]
If the MAC address for the specified IP address in the ARP table matches the RUT2's MAC address, it confirms that the configuration is functioning correctly.
[[File:Vxlan arp rut1.png|border|class=tlt-border]]
Configuration testing from RUT2 side:
[[File:Vxlan ping rut2 to rut1.png|border|class=tlt-border]]
[[File:Vxlan arp rut2.png|border|class=tlt-border]]
===Testing===
===Testing===
To test configuration follow the exact same steps described in [[#Configuration testing| '''Configuration testing''']] section
To test configuration follow the exact same steps described in [[#Configuration testing| '''Configuration testing''']] section
