Template:Networking rutos manual cloud solutions: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(32 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version = {{{series}}}{{#ifeq:{{{name}}}|RUT241|M|}}_R_00.07.01
| series = {{{series}}}
| series    = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} IoT Platforms (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} IoT Platforms (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
__TOC__
__TOC__
==Summary==
==Summary==
Line 9: Line 15:


This chapter of the user manual provides an overview of the Cloud Solutions page for {{{name}}} devices.
This chapter of the user manual provides an overview of the Cloud Solutions page for {{{name}}} devices.
<u><b>Note:</b> Each Cloud Solutions service, except RMS, is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>


{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
Line 22: Line 30:
The figure below is a screenshot of the RMS section taken from a device which has been connected to RMS:
The figure below is a screenshot of the RMS section taken from a device which has been connected to RMS:


[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_rms_settings.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 32: Line 40:
     <tr>
     <tr>
         <td>Connection type</td>
         <td>Connection type</td>
         <td>Enabled | Standby | Disabled; default: <b>Enabled</b></td>
         <td>Enabled {{!}} Standby {{!}} Disabled; default: <b>Enabled</b></td>
         <td>Defines how the device will connect to RMS:
         <td>Defines how the device will connect to RMS:
             <ul>
             <ul>
                 <li><b>Enabled</b> - the device attempts to connect to RMS every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If it cannot connect for 14 days, it will enter Standby mode.</li>
                 <li><b>Enabled</b> - RMS functionality is always on. When disconnected from RMS, the device will try connecting every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If the device is disconnected from RMS for 14 days, it will go into Standby mode. When trying to connect to rms without internet connection, the router will try to reestablish connection every 10 seconds.</li>
                 <li><b>Standby</b> - the device attempts to connect to RMS every 6 hours.</li>
                 <li><b>Standby</b> - The device tries to establish a connection with the server infrequently (6 hours in-between attempts). This is done in order to reduce mobile traffic. In order to start using RMS, user intervention is not necessary from the device's side. Worst case scenario - RMS connection will be established 6 hours after the device was added to RMS.</li>
                 <li><b>Disabled</b> - RMS functionality is disabled.</li>
                 <li><b>Disabled</b> - RMS functionality is completely disabled; therefore, no connection attempts are made. In order to start using RMS, the user must enable the service on the device's side.</li>
             </ul>
             </ul>
         </td>
         </td>
Line 43: Line 51:
     <tr>
     <tr>
         <td>Hostname</td>
         <td>Hostname</td>
         <td>host | ip; default: <b>rms.teltonika.lt</b></td>
         <td>host {{!}} ip; default: <b>rms.teltonika.lt</b></td>
         <td>Address of the RMS server. If you're using regular RMS, just leave the default address (<i><nowiki>rms.teltonika.lt</nowiki></i>).</td>
         <td>Address of the RMS server. If you're using regular RMS, just leave the default address (<i><nowiki>rms.teltonika.lt</nowiki></i>).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Port</td>
         <td>Port</td>
         <td>integer [0..65535]; default: <b>15009</b></td>
         <td>integer [1..65535]; default: <b>15009</b></td>
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
    </tr>
    <tr>
        <td>Authentication code</td>
        <td>string; default: <b>none</b></td>
        <td>Authentication code provided by RMS after adding the device.</td>
    </tr>
    <tr>
        <th>Proxy settings</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Enable proxy</td>
        <td>off {{!}} <span style="color:blue">on</span>; default: <b>off</b></td>
        <td>Enable RMS connection through proxy.</td>
    </tr>
    <tr>
        <td><span style="color:blue">Proxy address</span></td>
        <td>domain names or IP addresses; default: <b>none</b></td>
        <td>Specify proxy address.</td>
    </tr>
    <tr>
        <td><span style="color:blue">Proxy SOCKS5 port</span></td>
        <td>integer [1..65535]; default: <b>1080</b></td>
        <td>SOCKS5 proxy server port.</td>
    </tr>
    <tr>
        <td><span style="color:blue">Use credentials</span></td>
        <td>off {{!}} <span style="color:green">on</span>; default: <b>off</b></td>
        <td>SOCKS5 proxy server port.</td>
    </tr>
    <tr>
        <td><span style="color:green">SOCKS5 username</span></td>
        <td>string; default: <b>none</b></td>
        <td>Specify username for SOCKS5 proxy connection.</td>
    </tr>
    <tr>
        <td><span style="color:green">SOCKS5 password</span></td>
        <td>string; default: <b>none</b></td>
        <td>Specify password for SOCKS5 proxy connection.</td>
     </tr>
     </tr>
</table>
</table>
Line 57: Line 105:
The RMS server waits for incoming connections. Since the device attempts to connect at a fixed interval, it may not connect instantly after you add it to RMS. While it is disconnected, you can check how much time is left until the next connection attempt in the Status section:
The RMS server waits for incoming connections. Since the device attempts to connect at a fixed interval, it may not connect instantly after you add it to RMS. While it is disconnected, you can check how much time is left until the next connection attempt in the Status section:


[[File:Networking_rutos_manual_cloud_solutions_rms_disconnected_rms_{{{rms}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_cloud_solutions_rms_disconnected_rms_{{{rms}}}_v5.png|border|class=tlt-border]]
 
To speed up the process by initiating an immediate connection attempt, click the <b>Connect</b> button.
 
[[File:Networking_rutos_manual_cloud_solutions_rms_connect_{{{rms}}}_v3.png|border|class=tlt-border]]
 
If a failure or unknown status occurs, there is an alternative to try to reconnect again, click the <b>Reconnect</b> button.
 
[[File:Networking_rutos_manual_cloud_solutions_rms_reconnect_{{{rms}}}_v3.png|border|class=tlt-border]]
 
When the device is already connected a <b>Reset</b> button becomes visible. Use it to terminate the device's connection to RMS.


To speed up the process by initiating an immediate connection attempt, click the 'Connect' button.
[[File:Networking_rutos_manual_cloud_solutions_rms_unregister_{{{rms}}}_v3.png|border|class=tlt-border]]


For more information on Teltonika Networks Remote Management System (RMS) refer to the <b>[[RMS Manual]]</b> or <b>[[RMS FAQ]]</b> pages.
For more information on Teltonika Networks Remote Management System (RMS) refer to the <b>[[RMS Manual]]</b> or <b>[[RMS FAQ]]</b> pages.
Line 67: Line 125:
<b>Azure IoT Hub</b> is Microsoft's ever-expanding set of cloud services to help your organization meet your business challenges. Azure IoT Hub is compatible with Teltonika Networks devices.
<b>Azure IoT Hub</b> is Microsoft's ever-expanding set of cloud services to help your organization meet your business challenges. Azure IoT Hub is compatible with Teltonika Networks devices.


{{#ifeq: {{{modem}}} | 1 |
By default, the Azure IoT list is empty. To add a new connection, enter a custom name and click the 'Add' button.
The figure and table below provides explanations for Azure IoT Hub configuration parameters when selected 'Message Type' is <i>GSM values</i>.
 
[[File:Networking_rutos_manual_cloud_solutions_azure_iot_hub_add.png|border|class=tlt-border]]
 
===Modify Azure IoTHub===


[[File:Networking_rutos_manual_cloud_solutions_azure_iot_hub_modem_1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_cloud_solutions_azure_iot_hub_modify.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 79: Line 140:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable Azure IoT Hub monitoring</td>
         <td>Enable</td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns the Azure IoT Hub service on or off.</td>
         <td>Enable Azure IoT service.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Connection string</td>
         <td>Name</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Unique connection string a.k.a. server address provided by the Azure Iot Hub service.</td>
         <td>Connection name.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Message Type</td>
         <td>Enable Direct Methods</td>
         <td>GSM values <nowiki>|</nowiki> MQTT messages; default: <b>MQTT messages</b></td>
         <td>off {{!}} <span style="color:red">on</span>; default: <b>off</b></td>
         <td>Values that are to be sent to the Azure server.</td>
         <td>Enable Direct Method feature set.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Message sending interval (sec.)</td>
         <td><span style="color:red">Device Model ID</span></td>
         <td>integer; default: <b>300</b></td>
         <td>string; default: <b>dtmi:Teltonika:genericDevice;1</b></td>
         <td>Device data sending frequency in seconds. Minimum value is 10 s.</td>
         <td>Model ID of the Digital Twins Definition Language.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Mobile Interface</td>
         <td>Connection type</td>
         <td>mobile interface; default: <b>mobs1a1</b></td>
         <td>Shared Access Signature (SAS) key {{!}} <span style="color:blue">Device Provisioning Service (DPS)</span>; default: <b>Shared Access Signature (SAS) key</b></td>
         <td>Interface name for which IP address and sent/received bytes should be selected.</td>
         <td>Connection type to an existing IoT Hub.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>GSM Values</td>
         <td>Connection String</td>
         <td>IMSI <nowiki>|</nowiki> IP Address <nowiki>|</nowiki> RSRP <nowiki>|</nowiki> ICCID <nowiki>|</nowiki> Bytes received <nowiki>|</nowiki> Cell ID <nowiki>|</nowiki> RSCP <nowiki>|</nowiki> PIN state <nowiki>|</nowiki> Manufacturer <nowiki>|</nowiki> Bytes sent <nowiki>|</nowiki> RSRQ <nowiki>|</nowiki> Revision number <nowiki>|</nowiki> Serial number <nowiki>|</nowiki> ECIO <nowiki>|</nowiki> SINR <nowiki>|</nowiki>Data carrier type <nowiki>|</nowiki> Network link state <nowiki>|</nowiki> Operator <nowiki>|</nowiki> PIN count <nowiki>|</nowiki> Signal level <nowiki>|</nowiki> Model <nowiki>|</nowiki> Connection state <nowiki>|</nowiki> Temperature <nowiki>|</nowiki> IMEI <nowiki>|</nowiki> SIM card state; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Selects the mobile connection values that to be sent to the Azure IoT Hub service.</td>
         <td>Connection string based on primary key used in API calls which allows device to communicate with IoT Hub.</td>
     </tr>
     </tr>
</table>|}}The figure and table below provides explanations for Azure IoT Hub configuration parameters{{#ifeq:{{{modem}}}|1| when selected 'Message Type' is <i>MQTT messages</i>|}}.
[[File:Networking_rutos_manual_cloud_solutions_azure_iot_hub_modem_0.png|border|class=tlt-border]]
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <td><span style="color:blue">ID Scope</span></td>
      <th>Value</th>
         <td>string; default: <b>none</b></td>
      <th>Description</th>
         <td>Unique identifier that is assigned to an Azure IoT Hub during its creation and is used to uniquely identify the specific provisioning service the device will register through.</td>
    </tr>
    <tr>
        <td>Enable Azure IoT Hub monitoring</td>
         <td>off | on; default: <b>off</b></td>
         <td>Turns the Azure IoT Hub service on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Connection string</td>
         <td><span style="color:blue">Registration ID</span></td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Unique connection string a.k.a. server address provided by the Azure Iot Hub service.</td>
         <td>The registration ID is used to uniquely identify a device registration with the Device Provisioning Service.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Message Type</td>
         <td><span style="color:blue">Global Device Endpoint</span></td>
         <td>{{#ifeq:{{{modem}}}|1|GSM values <nowiki>|</nowiki>|}} MQTT messages; default: <b>MQTT messages</b></td>
         <td>string; default: <b>global.azure-devices-provisioning.net</b></td>
         <td>Values that are to be sent to the Azure server.</td>
         <td>Destination for messages sent by IoT devices to the Azure IoT Hub.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>MQTT Host</td>
         <td><span style="color:blue">Attestation mechanism</span></td>
         <td>ip | host; default: <b>none</b></td>
         <td><span style="color:brown">X.509 certificates</span> {{!}} <span style="color:orange">Symmetric Key</span>; default: <b>X.509 certificates</b></td>
         <td>MQTT broker's IP address or hostname.</td>
         <td>Method used to confirm a device's identity in Device Provisioning Service.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>MQTT Port</td>
         <td><span style="color:brown">X.509 Certificate</span></td>
        <td>integer [0..65535]; default: <b>none</b></td>
         <td>-interactive button; default: <b></b></td>
        <td>MQTT broker's IP port number.</td>
         <td>Upload the "leaf" certificate file.</td>
    </tr>
    <tr>
        <td>Topic</td>
         <td>string; default: <b>none</b></td>
         <td>MQTT topic to be used for publishing the data.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Username</td>
         <td><span style="color:brown">X.509 Private Key</span></td>
         <td>string; default: <b>none</b></td>
         <td>-interactive button; default: <b></b></td>
         <td>Username used for authentication to the MQTT broker.</td>
         <td>Upload the "leaf" key file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Password</td>
         <td><span style="color:orange">Symmetric Key</span></td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Password used for authentication to the MQTT broker.</td>
         <td>The the derived device key from the DPS Primary Key.</td>
     </tr>
     </tr>
</table>
</table>
Line 164: Line 210:
The <b>Cloud of Things</b> is an IoT cloud platform which provides the possibility to remotely monitor, manage and control your connected devices and machines – plug-and-play, without extensive installation.
The <b>Cloud of Things</b> is an IoT cloud platform which provides the possibility to remotely monitor, manage and control your connected devices and machines – plug-and-play, without extensive installation.


[[File:Networking_rutos_manual_cloud_solutions_cloud_of_things_modem_{{{modem}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_cloud_solutions_cloud_of_things_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 186: Line 232:
         <td>integer; default: <b>none</b></td>
         <td>integer; default: <b>none</b></td>
         <td>Push connection interval in minutes.</td>
         <td>Push connection interval in minutes.</td>
     </tr>{{#ifeq: {{{modem}}} | 1 |
     </tr>
    <tr>
        <td>Mobile Interface</td>
        <td>mobile interface; default: <b>mobs1a1</b></td>
        <td>Interface name for which IP address and sent/received bytes should be selected.</td>
    </tr>|}}
     <tr>
     <tr>
         <td>Reset Auth</td>
         <td>Reset Auth</td>
Line 205: Line 246:
The figure and table below provide explanations for Cumulocity configuration parameters available on the device. For a detailed configuration guide, [[Cumulocity Configuration|click here]].
The figure and table below provide explanations for Cumulocity configuration parameters available on the device. For a detailed configuration guide, [[Cumulocity Configuration|click here]].


[[File:Networking_rutos_manual_cloud_solutions_cumulocity_modem_{{{modem}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_cloud_solutions_cumulocity_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 232: Line 273:
         <td>integer; default: <b>none</b></td>
         <td>integer; default: <b>none</b></td>
         <td>Connection push interval in minutes. This field defines how often the device will try to connect to the Cumulocity server.</td>
         <td>Connection push interval in minutes. This field defines how often the device will try to connect to the Cumulocity server.</td>
     </tr>{{#ifeq:{{{modem}}}|1|
     </tr>
    <tr>
        <td>Mobile Interface</td>
        <td>network interface; default: <b>mob1s1a1</b></td>
        <td>Interface whose GSM parameters will be sent to the Cumulocity server for monitoring.</td>
    </tr>|}}
     <tr>
     <tr>
         <td>Reset Auth</td>
         <td>Reset Auth</td>
Line 285: Line 321:
         <td>Interface whose GSM parameters will be sent to the ThingWorx server for monitoring.</td>
         <td>Interface whose GSM parameters will be sent to the ThingWorx server for monitoring.</td>
     </tr>|}}
     </tr>|}}
</table>
{{#switch:{{{series}}}
|RUTX|RUTM=
==Greengrass==
[[File:Networking_rutos_manual_cloud_solutions_greengrass_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Turns the AWS Greengrass service on or off.</td>
    </tr>
    <tr>
        <td>Config file</td>
        <td>.tar.gz file; default: <b>none</b></td>
        <td>Core-specific config file.</td>
    </tr>
</table>|#default=}}
==AWS IoT Core==
AWS IoT Core is a utility meant to interact with Amazon Web Services cloud platform. It provides AWS IoT Core Jobs support that lets the device be controlled from AWS IoT Core platform by using device's API.
To add new 'AWS job', press <b>Add</b> button:
[[File:Networking_rutos_manual_cloud_solutions_aws_iot_core_add.png|border|class=tlt-border]]
After that you will be redirected to AWS jobs thing configuration:
[[File:Networking_rutos_manual_cloud_solutions_aws_jobs_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Turns the thing instance on or off.</td>
    </tr>
    <tr>
        <td>Thing's name</td>
        <td>string; default: <b>none</b></td>
        <td>Thing's name on AWS IoT Core platform.</td>
    </tr>
    <tr>
        <td>Endpoint</td>
        <td>domain; default: <b>none</b></td>
        <td>AWS IoT Core platform endpoint used to determine AWS account to connect to.</td>
    </tr>
    <tr>
        <td>CA file</td>
        <td>.ca file; default: <b>none</b></td>
        <td>AWS CA certificate obtained from AWS IoT Core platform.</td>
    </tr>
    <tr>
        <td>Thing's certificate</td>
        <td>.crt file; default: <b>none</b></td>
        <td>Thing's certificate obtained from AWS IoT Core platform.</td>
    </tr>
    <tr>
        <td>Thing's private key</td>
        <td>.key file; default: <b>none</b></td>
        <td>Thing's private key obtained from AWS IoT Core platform.</td>
    </tr>
    <tr>
        <td>Port</td>
        <td>integer [1..65535]; default: <b>8883</b></td>
        <td>MQTT port number.</td>
    </tr>
    <tr>
        <td>QoS</td>
        <td>At most once (0) {{!}} At least once (1); default: <b>At least once (1)</b></td>
        <td>MQTT Quality of Service. Allowed values:
        <ul>
            <li><b>0</b> - when we prefer that the message will not arrive at all rather than arrive twice</li>
            <li><b>1</b> - when we want the message to arrive at least once but don't care if it arrives twice (or more).</li>
        </ul>
        </td>
    </tr>
    <tr>
        <td>Keepalive</td>
        <td>integer [30..65535]; default: <b>120</b></td>
        <td>MQTT keepalive time in seconds.</td>
    </tr>
    <tr>
        <td>Max loops</td>
        <td>integer [10..200]; default: <b>50</b></td>
        <td>MQTT max loops - during initial subscription to topics the service has to wait for a successful subscription acknowledgement. The service performs mosquitto loops to wait for the answer. This option determines how many loops can be performed while waiting for subscription acknowledgement.</td>
    </tr>
</table>
</table>


[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]

Latest revision as of 13:40, 8 October 2024

The information in this page is updated in accordance with firmware version .


Summary

The Cloud Solutions section is used to configure how the device will connect to certain cloud management systems.

This chapter of the user manual provides an overview of the Cloud Solutions page for {{{name}}} devices.

Note: Each Cloud Solutions service, except RMS, is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

RMS

RMS (Remote Management System) is a cloud system designed by Teltonika and intended for remote monitoring and management of Teltonika-Networks products.

In order to add a device(s) to RMS, get yourself acquainted by watching this instructional video and register an account by clicking here. Each unique device receives a free month-long RMS license when added to RMS for the first time.

The figure below is a screenshot of the RMS section taken from a device which has been connected to RMS:

Field Value Description
Connection type Enabled | Standby | Disabled; default: Enabled Defines how the device will connect to RMS:
  • Enabled - RMS functionality is always on. When disconnected from RMS, the device will try connecting every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If the device is disconnected from RMS for 14 days, it will go into Standby mode. When trying to connect to rms without internet connection, the router will try to reestablish connection every 10 seconds.
  • Standby - The device tries to establish a connection with the server infrequently (6 hours in-between attempts). This is done in order to reduce mobile traffic. In order to start using RMS, user intervention is not necessary from the device's side. Worst case scenario - RMS connection will be established 6 hours after the device was added to RMS.
  • Disabled - RMS functionality is completely disabled; therefore, no connection attempts are made. In order to start using RMS, the user must enable the service on the device's side.
Hostname host | ip; default: rms.teltonika.lt Address of the RMS server. If you're using regular RMS, just leave the default address (rms.teltonika.lt).
Port integer [1..65535]; default: 15009 Port number for connecting to RMS. If you're using regular RMS, just leave the default port (15009).
Authentication code string; default: none Authentication code provided by RMS after adding the device.
Proxy settings Value Description
Enable proxy off | on; default: off Enable RMS connection through proxy.
Proxy address domain names or IP addresses; default: none Specify proxy address.
Proxy SOCKS5 port integer [1..65535]; default: 1080 SOCKS5 proxy server port.
Use credentials off | on; default: off SOCKS5 proxy server port.
SOCKS5 username string; default: none Specify username for SOCKS5 proxy connection.
SOCKS5 password string; default: none Specify password for SOCKS5 proxy connection.


The RMS server waits for incoming connections. Since the device attempts to connect at a fixed interval, it may not connect instantly after you add it to RMS. While it is disconnected, you can check how much time is left until the next connection attempt in the Status section:

[[File:Networking_rutos_manual_cloud_solutions_rms_disconnected_rms_{{{rms}}}_v5.png|border|class=tlt-border]]

To speed up the process by initiating an immediate connection attempt, click the Connect button.

[[File:Networking_rutos_manual_cloud_solutions_rms_connect_{{{rms}}}_v3.png|border|class=tlt-border]]

If a failure or unknown status occurs, there is an alternative to try to reconnect again, click the Reconnect button.

[[File:Networking_rutos_manual_cloud_solutions_rms_reconnect_{{{rms}}}_v3.png|border|class=tlt-border]]

When the device is already connected a Reset button becomes visible. Use it to terminate the device's connection to RMS.

[[File:Networking_rutos_manual_cloud_solutions_rms_unregister_{{{rms}}}_v3.png|border|class=tlt-border]]

For more information on Teltonika Networks Remote Management System (RMS) refer to the RMS Manual or RMS FAQ pages.

Azure IoT Hub

Azure IoT Hub is Microsoft's ever-expanding set of cloud services to help your organization meet your business challenges. Azure IoT Hub is compatible with Teltonika Networks devices.

By default, the Azure IoT list is empty. To add a new connection, enter a custom name and click the 'Add' button.

Modify Azure IoTHub

Field Value Description
Enable off | on; default: off Enable Azure IoT service.
Name string; default: none Connection name.
Enable Direct Methods off | on; default: off Enable Direct Method feature set.
Device Model ID string; default: dtmi:Teltonika:genericDevice;1 Model ID of the Digital Twins Definition Language.
Connection type Shared Access Signature (SAS) key | Device Provisioning Service (DPS); default: Shared Access Signature (SAS) key Connection type to an existing IoT Hub.
Connection String string; default: none Connection string based on primary key used in API calls which allows device to communicate with IoT Hub.
ID Scope string; default: none Unique identifier that is assigned to an Azure IoT Hub during its creation and is used to uniquely identify the specific provisioning service the device will register through.
Registration ID string; default: none The registration ID is used to uniquely identify a device registration with the Device Provisioning Service.
Global Device Endpoint string; default: global.azure-devices-provisioning.net Destination for messages sent by IoT devices to the Azure IoT Hub.
Attestation mechanism X.509 certificates | Symmetric Key; default: X.509 certificates Method used to confirm a device's identity in Device Provisioning Service.
X.509 Certificate -interactive button; default: Upload the "leaf" certificate file.
X.509 Private Key -interactive button; default: Upload the "leaf" key file.
Symmetric Key string; default: none The the derived device key from the DPS Primary Key.

Cloud of Things

The Cloud of Things is an IoT cloud platform which provides the possibility to remotely monitor, manage and control your connected devices and machines – plug-and-play, without extensive installation.

Field Value Description
Enable off | on; default: off Turns the Cloud of Things service on or off.
Server Address ip | host; default: none Cloud of Things server IP address or hostname.
Interval integer; default: none Push connection interval in minutes.
Reset Auth - (interactive button) Resets authentication data so that device could be re-registered on the Cloud of Things Device Management platform.

Cumulocity

Cumulocity IoT is a cloud-based, real-time IoT management platform that's also compatible with Teltonika-Networks devices.

The figure and table below provide explanations for Cumulocity configuration parameters available on the device. For a detailed configuration guide, click here.

Field Value Description
Enable off | on; default: off Turns the Cumulocity service on or off.
Use SSL/TLS off | on; default: off Turn SSL/TLS protocol support on or off.
Server Address host; default: none Hostname of your Cumulocity server. It should match the Environment name from the Cumulocity registration.
For example: teltonika-networks.eu-latest.cumulocity.com
Interval integer; default: none Connection push interval in minutes. This field defines how often the device will try to connect to the Cumulocity server.
Reset Auth - (interactive button) Resets authentication for this device. If you click this, you'll have to authorize this from Cumulocity dashboard before it can successfully connect to the server.

ThingWorx

[[File:Networking_rutos_manual_cloud_solutions_thingworx_modem_{{{modem}}}.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: off Turns the ThingWorx service on or off.
Server Address ip | host; default: none Thingworx server IP address or hostname.
Server Port integer [0..65535]; default: none Thingworx server's port number.
Thing Name string; default: none Thing name defined in ThingWorx CP.
Application Key string; default: none Application key generated in ThingWorx CP.


AWS IoT Core

AWS IoT Core is a utility meant to interact with Amazon Web Services cloud platform. It provides AWS IoT Core Jobs support that lets the device be controlled from AWS IoT Core platform by using device's API.

To add new 'AWS job', press Add button:

After that you will be redirected to AWS jobs thing configuration:

Field Value Description
Enable off | on; default: off Turns the thing instance on or off.
Thing's name string; default: none Thing's name on AWS IoT Core platform.
Endpoint domain; default: none AWS IoT Core platform endpoint used to determine AWS account to connect to.
CA file .ca file; default: none AWS CA certificate obtained from AWS IoT Core platform.
Thing's certificate .crt file; default: none Thing's certificate obtained from AWS IoT Core platform.
Thing's private key .key file; default: none Thing's private key obtained from AWS IoT Core platform.
Port integer [1..65535]; default: 8883 MQTT port number.
QoS At most once (0) | At least once (1); default: At least once (1) MQTT Quality of Service. Allowed values:
  • 0 - when we prefer that the message will not arrive at all rather than arrive twice
  • 1 - when we want the message to arrive at least once but don't care if it arrives twice (or more).
Keepalive integer [30..65535]; default: 120 MQTT keepalive time in seconds.
Max loops integer [10..200]; default: 50 MQTT max loops - during initial subscription to topics the service has to wait for a successful subscription acknowledgement. The service performs mosquitto loops to wait for the answer. This option determines how many loops can be performed while waiting for subscription acknowledgement.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_cloud_solutions&oldid=133894"