RUT976 Remote Monitoring & Administration

RUT976 supports multiple monitoring and administration possibilities.

Remote control options

The RUT976 router supports the following remote control capabilities:

Remote control method	Can get parameters	Can set parameters
RMS
SSH
HTTP
SMS
JSON
VPN
SNMP
Modbus
MQTT
TR-069
DNP3
OPC UA
BACnet	Acts as gateway

RMS

---

The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the System → Administration → RMS page.

Public IP

---

If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access

---

Remote HTTP access can be set up via the System → Administration → Access Control page.

SSH access

---

Remote SSH access can be set up via the System → Administration → Access Control page.

SMS

---

The router can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the Services → SMS Utilities → SMS Rules page.

JSON-RPC

---

JSON-RPC access can be set up via the System → Administration → Access Control page. Note: As of RUTOS firmware version 7.0 and higher, it is enabled by default.

VPN

---

Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by RUT976, visit the VPN manual page.

SNMP

---

Simple Network Management Protocol (SNMP) is a protocol for network management, used for collecting information from network devices. For more information on SNMP in RUT976, visit the SNMP manual page.

Modbus TCP

---

Modbus is a serial communications protocol used in communication with various types of industrial electronic devices. For more information on Modbus TCP in RUT976, visit the Modbus manual page.

MQTT

---

MQTT (MQ Telemetry Transport or Message Queue Telemetry Transport) is a publish-subscribe-based "lightweight" messaging protocol for use on top of the TCP/IP protocol. For more information on MQTT in RUT976, visit the MQTT manual page

TR-069

---

Technical Report 069 (TR-069) is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. For more information on TR-069 in RUT976, visit the TR-069 manual page

DNP3

---

Distributed Network Protocol 3 (DNP3) is a set of communications protocols used between components in process automation systems. For more information on DNP3 in RUT976, visit the DNP3 manual page

OPC UA

---

OPC Unified Architecture (OPC UA) is a cross-platform, open-source, IEC62541 standard for data exchange from sensors to cloud applications developed by the OPC Foundation. For more information on OPC UA in RUT976, visit the OPC UA manual page

BACnet

---

BACnet is a communication protocol for building automation and control (BAC) networks that use the ASHRAE, ANSI, and ISO 16484-5 standards protocol. For more information on BACnet in RUT976, visit the BACnet manual page