Template:Networking rutos manual serial utilities: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(44 intermediate revisions by 5 users not shown)
Line 7: Line 7:
  }}
  }}
}}
}}
<br><i><b>Note</b>: {{#ifeq:{{{rs232}}}|1|
 
<b>[[{{{name}}} RS232|RS232]]</b>|}}{{#ifeq:{{{rs232}}}|1|{{#ifeq:{{{rs485}}}|1|&#32;and&#32;|}}|}}{{#ifeq:{{{rs485}}}|1|<b>[[{{{name}}} RS485|RS485]]</b>|}} services were merged and moved to <b>Serial Utilities</b> page from FW version {{{series}}}_R_00.07.03</i>.
{{#ifeq: {{{series}}}| RUT9 |<i><b>Note</b>: <b>[[{{{name}}} RS232/RS485 (legacy WebUI)#RS232|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT9 |<i><b>Note</b>: <b>[[{{{name}}} RS232/RS485 (legacy WebUI)#RS232|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==


The <b>Serial Utilities</b> page is used to make serial communication configurations of different types.
The <b>Serial Utilities</b> page is used to make serial communication configurations of different types.
{{#ifeq:{{{name}}}|TRB143|==Over IP== <!-----------------TRB143 has Only Over IP--------------------->
The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network.
===Serial Device Configuration===
----
Configure serial port communication parameters in the <b>Serial Device Configuration</b> section.
[[File:Networking_rutos_manual_serial_utilities_over_ip_serial_default_mbus_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns the instance on or off.</td>
    </tr>
    <tr>
      <td>Name</td>
      <td>string; default: <b>none</b></td>
      <td>Instance name, generated by the user when first creating the configuration.</td>
    </tr>
    <tr>
        <td>Device</td>
        <td>mbus; default: <b>mbus</b></td>
        <td>Specifies which serial port will be used for serial communication.</td>
    </tr>
    <tr>
    <td>Baud rate</td>
        <td>integer [300..3000000]; default: <b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>
    <tr>
    <td>Data bits</td>
        <td>7 {{!}} 8; default: <b>8</b></td>
        <td>Number of data bits for each character.</td>
    </tr>
    <tr>
      <td>Stop bits</td>
      <td>1 {{!}} 2; default: <b>1</b></td>
      <td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
    </tr>
    <tr>
    <td>Parity</td>
        <td>None {{!}} Odd {{!}} Even {{!}} Mark {{!}} Space; default: <b>None</b></td>
        <td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
            <ul>
              <li><b>None</b> (<b>N</b>) - no parity method is used.</li>
              <li><b>Odd</b> (<b>O</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.</li>
              <li><b>Even</b> (<b>E</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be even.</li>
            </ul>
        </td>
    </tr>
    <tr>
    <td>Flow control</td>
        <td>None; default: <b>None</b></td>
        <td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.{{#ifeq: {{{rs232}}} | 1 |
            <ul>
                <li><b>RTS/CTS</b> - hardware handshaking. RTS and CTS are turned OFF and ON from alternate ends to control data flow, for instance when a buffer is almost full.</li>
                <li><b>Xon/Xoff</b> - software handshaking. The Xon and Xoff characters are sent by the receiver to the sender to control when the sender will send data, i.e., these characters go in the opposite direction to the data being sent. The circuit starts in the "sending allowed" state. When the receiver's buffers approach capacity, the receiver sends the Xoff character to tell the sender to stop sending data. Later, after the receiver has emptied its buffers, it sends an Xon character to tell the sender to resume transmission.</li>
            </ul>|}}
        </td>
    </tr>
</table>
===Over IP Configuration Settings===
----
You can configure network related parameters of the serial connection in the <b>Over IP Configuration</b> secion.
[[File:Networking rutos manual serial utilities over ip mbus configuration general.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th style="width: 360px>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
    <td>Mode</td>
        <td><span style="color: red;">Server</span> {{!}} <span style="color: purple;">Client</span> {{!}} <span style="color: orange;">Bidirect</span>; default: <b>Server</b></td>
        <td>This device's role in the connection:
            <ul>
                <li><b>Server</b> - the device waits for incoming connections.</li>
                <li><b>Client</b> - the device initiates the connection.</li>
                <li><b>Bidirect</b> - acts as client by default but waits for incoming connections at the same time.</li>
            </ul>
        </td>
    </tr>
    <tr>
      <td>Protocol</td>
      <td><span style="color: blue;">TCP</span> {{!}} <span style="color: green;">UDP</span>; default: <b>TCP</b></td>
      <td>Protocol used in the communication process.</td>
    </tr>
    <tr>
      <td>Listening port</td>
      <td>[1..65535]; default: <b>empty</b></td>
      <td>When enabled, all data will be transmitted transparently.</td>
    </tr>
    </table>
   
[[File:Networking rutos manual serial utilities over ip mbus configuration advanced.png|border|class=tlt-border]]
   
    <table class="nd-mantable">
    <tr>
        <th style="width: 360px>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Raw mode</td>
      <td>off {{!}} on; default: <b>on</b></td>
      <td>When enabled, all data will be transmitted transparently.</td>
    </tr>
    <tr>
    <td>No leading zeros</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>When checked, indicates that the first hex zeros should be skipped.</td>
    </tr>
    <tr>
    <td>Inactivity timeout</td>
        <td>integer [0..36000]; default: <b>300</b></td>
        <td>Specifies period of time in seconds, where server connection must be inactive, to disconnect client. To disable timeout input 0.</td>
    </tr>
    <tr>
    <td>Serial timeout</td>
        <td>integer [0..1000]; default: <b>none</b></td>
        <td>Specifies the maximum milliseconds to wait for serial data.</td>
    </tr>
    <tr>
    <td>Max clients</td>
        <td>integer [1..32]; default: <b>4</b></td>
        <td>Specify how many clients are allowed to connect simultaneously.</td>
    </tr>
    <tr>
    <td>TCP echo</td>
        <td>on {{!}} off; default: <b>off</b></td>
        <td>Enable software TCP echo.</td>
    </tr>
    <tr>
    <td>Close connections</td>
        <td>on {{!}} off; default: <b>off</b></td>
        <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
    </tr>
    <tr>
    <td>Kepp alive time</td>
        <td>integer [0..32000]; default: <b>0</b></td>
        <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
    </tr>
    <tr>
    <td>Kepp alive interval</td>
        <td>integer [0..32000]; default: <b>0</b></td>
        <td>The interval between subsequential keepalive probes.</td>
    </tr>
    <tr>
    <td>Kepp alive probes</td>
        <td>integer [0..32000]; default: <b>0</b></td>
        <td>The number of unacknowledged probes.</td>
    </tr>
</table>
===IP Filter===
----
The <b>IP Filter</b> section is used for configuring which network is allowed to communicate with the device. You may add a new instance by selecting the Interface and pressing Add.
[[File:Networking_rutos_manual_console_ip_filter.png|border|class=tlt-border]]
Then enter the IP address and save.
[[File:Networking_rutos_manual_console_ip_filter_instance.png|border|class=tlt-border]]
|To make a <b>new serial configuration</b> instance select a serial type from the left-hand navigation menu. In the next page enter a custom name for the new config, select a serial device and click the Add button.
Example from the Modem Configuration page:
[[File:Networking_rutos_manual_serial_utilities_add_new_instance_default_{{{default}}}_v1.png|border|class=tlt-border]]
Then, click the Edit button next to the instance:
[[File:Networking_rutos_manual_serial_utilities_edit_config_default_{{{default}}}_v1.png|border|class=tlt-border]]
This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.
This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.
{{#ifeq: {{#expr: {{{rs232}}} or {{{rs485}}}}}| 1 |==General information==|}}
{{#ifeq: {{#expr: {{{rs232}}} or {{{rs485}}}}}| 1 |==General information==|}}
{{#ifeq:{{{series}}}|TRB2|
{{#switch:{{{series}}}|TRB2| TRB2M | RUT206 =
===RS232/RS485===
===RS232/RS485===
----
----
====Connector pinout====
====Connector pinout====
----
----
For {{{name}}} pinout, please refer to <b>[[{{{name}}} Input/Output#16_pin_Connector_Pinout|Input/Output]]</b> page.|
For {{{name}}} pinout, please refer to <b>[[QSG {{{name}}}#Front_view|QSG]]</b> page.| #default =
{{#ifeq: {{{rs232}}} | 1 |
{{#ifeq: {{{rs232}}} | 1 |
===RS232===
===RS232===
Line 414: Line 227:
}}
}}


==Modem Control==  
{{#ifeq:{{{modem}}}|1|==Modem Control==  


The <b>Modem</b> serial type is used to manage modem functionality which could be accessed using shell interface. For this purpose you may want use CR/LF (Carriage Return, Line Feed) capable applications like PuTTY on Windows and microcom, minicom, cutecom or similar applications on Linux.
The <b>Modem</b> serial type is used to manage modem functionality which could be accessed using shell interface. For this purpose you may want use CR/LF (Carriage Return, Line Feed) capable applications like PuTTY on Windows and microcom, minicom, cutecom or similar applications on Linux.


{{#ifeq:{{{dual_modem}}} | 1 |
===Status===
[[File:Networking_rutos_manual_serial_utilities_modem_control_default_{{{default}}}_dual_modem_v1.png|border|class=tlt-border]]|
 
[[File:Networking_rutos_manual_serial_utilities_modem_control_default_{{{default}}}_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_serial_utilities_modem_control_status.png|border|class=tlt-border]]
}}
 
===General settings===


[[File:Networking_rutos_manual_serial_utilities_modem_control.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 444: Line 259:
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
         <td>Specifies which serial port will be used for serial communication.</td>
         <td>Specifies which serial port will be used for serial communication.</td>
     </tr>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
    <tr>
    <td>Baud rate (RS485)</td>
        <td>integer [300..230400]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{rs232}}} | 1 |
    <tr>
    <td>Baud rate (RS232)</td>
        <td>integer [300..115200]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{usb}}} | 1 |
     <tr>
     <tr>
     <td>Baud rate</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..3000000]; default: <b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>
     </tr>|}}
     <tr>
     <tr>
     <td>Data bits</td>
     <td>Data bits</td>
         <td>7 {{!}} 8; default: <b>8</b></td>
         <td>{{#ifeq: {{{rs232}}} | 1 | 5 {{!}} 6 {{!}} 7 {{!}} 8 | 8}}; default: <b>8</b></td>
         <td>Number of data bits for each character.</td>
         <td>Number of data bits for each character.</td>
     </tr>
     </tr>
Line 491: Line 316:
             </ul>
             </ul>
         </td>
         </td>
     </tr> |}}
     </tr>|}}
     <tr>
     <tr>
         <td>Mode</td>
         <td>Mode</td>
Line 501: Line 326:
             </ul>
             </ul>
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}
     </tr>|}}}}
</table>
 
===Advanced settings===
 
[[File:Networking_rutos_manual_serial_utilities_modem_control_advanced_settings.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
     <tr>
     <tr>
        <td>Start up message</td>
      <td>Start up message</td>
       <td>string; default: <b>none</b></td>
       <td>string; default: <b>none</b></td>
       <td>Message to print to serial device when modem control is ready.</td>
       <td>Prints message to serial device when modem control is ready.</td>
    </tr>
    <tr>
      <td>Canonical mode</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Forwards data to modem only when new line symbol ('\n') is detected.</td>
     </tr>
     </tr>
</table>
</table>|}}


==Console==
{{#switch: {{{name}}} | TRB143 = | #default = ==Console==  


<b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.
<b>Console</b> mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.


[[File:Networking_rutos_manual_serial_utilities_console_default_{{{default}}}_v1.png|border|class=tlt-border]]
===Status===
[[File:Networking_rutos_manual_serial_utilities_console_status.png|border|class=tlt-border]]
 
===General settings===
[[File:Networking_rutos_manual_serial_utilities_console_general.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 540: Line 386:
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
         <td>Specifies which serial port will be used for serial communication.</td>
         <td>Specifies which serial port will be used for serial communication.</td>
     </tr>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
    <tr>
    <td>Baud rate (RS485)</td>
        <td>integer [300..230400]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{rs232}}} | 1 |
    <tr>
    <td>Baud rate (RS232)</td>
        <td>integer [300..115200]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{usb}}} | 1 |
     <tr>
     <tr>
     <td>Baud rate</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..3000000]; default: <b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>
     </tr>|}}
     <tr>
     <tr>
     <td>Data bits</td>
     <td>Data bits</td>
         <td>7 {{!}} 8; default: <b>8</b></td>
         <td>{{#ifeq: {{{rs232}}} | 1 | 5 {{!}} 6 {{!}} 7 {{!}} 8 | 8}}; default: <b>8</b></td>
         <td>Number of data bits for each character.</td>
         <td>Number of data bits for each character.</td>
     </tr>
     </tr>
Line 576: Line 432:
             </ul>|}}
             </ul>|}}
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}
     </tr>|}}}}
</table>
</table> }}


==Over IP==
==Over IP==


The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network.
The <b>Over IP</b> serial type is used to manage serial connections over a TCP/IP network.
===Instance Example===
----
Here's an example demonstrating Over IP in action, running in Client + Server Mode.
[[File:Networking_rutos_manual_serial_utilities_over_ip_configuration_example_v1.png|border|class=tlt-border]]


===Serial Device Configuration===
===Serial Device Configuration===
Line 612: Line 473:
     <tr>
     <tr>
         <td>Device</td>
         <td>Device</td>
         <td>{{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}; default: <b>{{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}</b></td>
         <td>{{#ifeq:{{{default}}}|mbus|MBUS| {{Template: Networking_rutos_manual_serial_ports | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}}}; default: <b>{{#ifeq:{{{default}}}|mbus|MBUS| {{Template: Networking_rutos_manual_default_serial_port | rs232={{{rs232}}} | rs485={{{rs485}}} | usb={{{usb}}} }}}}</b></td>
         <td>Specifies which serial port will be used for serial communication.</td>
         <td>Specifies which serial port will be used for serial communication.</td>
     </tr>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
    <tr>
    <td>Baud rate (RS485)</td>
        <td>integer [300..230400]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{rs232}}} | 1 |
    <tr>
    <td>Baud rate (RS232)</td>
        <td>integer [300..115200]; default:<b>9600</b></td>
        <td>Data rate for serial data transmission (in bits per second (bps)).</td>
    </tr>|}}{{#ifeq: {{{usb}}} | 1 |
     <tr>
     <tr>
     <td>Baud rate</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..3000000]; default: <b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>
     </tr>|}}
     <tr>
     <tr>
     <td>Data bits</td>
     <td>Data bits</td>
         <td>5 {{!}} 6 {{!}} 7 {{!}} 8; default: <b>8</b></td>
         <td>{{#ifeq: {{{rs232}}} | 1 | 5 {{!}} 6 {{!}} 7 {{!}} 8 | 8}}; default: <b>8</b></td>
         <td>Number of data bits for each character.</td>
         <td>Number of data bits for each character.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Stop bits</td>
       <td>Stop bits</td>
       <td>1 {{!}} 2; default: <b>1</b></td>
       <td>{{#switch: {{{name}}} | TRB143 = 1; default: <b>1</b>  | #default = 1 {{!}} 2; default: <b>1</b> }}</td>
       <td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
       <td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Parity</td>
     <td>Parity</td>
         <td>None {{!}} Odd {{!}} Even {{!}} Mark {{!}} Space; default: <b>None</b></td>
         <td>{{#switch: {{{name}}} | TRB143 = Even {{!}} default: Even | #default = None {{!}} Odd {{!}} Even {{!}} Mark {{!}} Space; default: <b>None</b> }}</td>
         <td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
         <td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
             <ul>
             <ul>
Line 650: Line 521:
             </ul>|}}
             </ul>|}}
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}{{#ifeq: {{{rs232}}} | 1 |
     </tr>|}}}}{{#ifeq: {{{rs232}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: green;">RS232:</span> Echo</td>
       <td><span style="color: green;">RS232:</span> Echo</td>
Line 667: Line 538:
You can configure network related parameters of the serial connection in the <b>Over IP Configuration</b> secion.
You can configure network related parameters of the serial connection in the <b>Over IP Configuration</b> secion.


[[File:Networking rutos manual serial utilities over ip mbus configuration general.png|border|class=tlt-border]]
[[File:Networking rutos manual serial utilities over ip mbus configuration general_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 698: Line 569:
     </tr>
     </tr>
     <tr>
     <tr>
       <td><span style="color: brown;">Predefined addresses</span></td>
       <td><span style="color: red;">Server: </span><span style="color: brown;">UDP: </span> Predefined addresses</td>
       <td>IP {{!}} Port; default: <b>empty</b></td>
       <td>IP {{!}} Port; default: <b>empty</b></td>
       <td></td>
       <td>Set predefined IP and port for UDP connection. E.g first field for address second for port.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 708: Line 579:
     </tr>
     </tr>
     </table>
     </table>
      
 
     [[File:Networking rutos manual serial utilities over ip mbus configuration advanced.png|border|class=tlt-border]]
[[File:Networking rutos manual serial utilities over ip mbus configuration security_v2.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th style="width: 360px>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Use TLS/SSL</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Mark to use TLS/SSL for connection.</td>
    </tr>
     <tr>
      <td>TLS version</td>
      <td>Support all  {{!}} tlsv1.0 {{!}} tlsv1.1 {{!}} tlsv1.2 {{!}} tlsv1.3; default: <b>Support all</b></td>
      <td>Minimum TLS version allowed to be used.</td>
     </tr>
    <tr>
      <td>TLS type</td>
      <td>Certificate based {{!}} <span style="color: blue;">Pre-Shared-Key based</span>; default: <b>Certificate based</b></td>
      <td>Select the type of TLS encryption.</td>
    </tr>
    <tr>
      <td>Require certificate</td>
      <td>off {{!}} on; default: <b>on</b></td>
      <td>Demand certificate and key from peer and verify them against certificate authority.</td>
    </tr>
    <tr>
      <td>Verify host</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Check if the server certificates Common Name (CN) matches hostname to which client is connecting.</td>
    </tr>
    <tr>
      <td>Certificate files from device</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Choose this option if you want to select certificate files from device.<br> Certificate files can be generated <a class=link href="/system/admin/certificates/generation">here</a>.</td>
    </tr>
    <tr>
      <td>Certificate file</td>
      <td>.crt file; default: <b>none</b></td>
      <td>Upload certificate file.</td>
    </tr>
    <tr>
      <td>Key file</td>
      <td>.key file; default: <b>none</b></td>
      <td>Upload key file.</td>
    </tr>
    <tr>
      <td>CA file</td>
      <td>.ca file; default: <b>none</b></td>
      <td>Upload CA file.</td>
    </tr>
    <tr>
      <td><span style="color: blue;">Pre-Shared-Key</span></td>
      <td>string; default: <b>none</b></td>
      <td>The pre-shared-key in hex format with no leading “0x”.</td>
    </tr>
    <tr>
      <td><span style="color: blue;">Identify</span></td>
      <td>string; default: <b>none</b></td>
      <td>Specify the identity.</td>
    </tr>
</table>
 
[[File:Networking rutos manual serial utilities over ip mbus configuration advanced_v3.png|border|class=tlt-border]]
      
      
     <table class="nd-mantable">
     <table class="nd-mantable">
Line 723: Line 659:
     </tr>
     </tr>
     <tr>
     <tr>
    <td>No leading zeros</td>
      <td>Remove all zeros</td>
        <td>off {{!}} on; default: <b>off</b></td>
      <td>off {{!}} on; default: <b>off</b></td>
        <td>When checked, indicates that the first hex zeros should be skipped.</td>
      <td>When checked, indicates that the first hex zeros should be skipped.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 751: Line 687:
         <td>on {{!}} off; default: <b>off</b></td>
         <td>on {{!}} off; default: <b>off</b></td>
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
    </tr>
        <tr>
    <td>Keep alive</td>
        <td><span style="color: blue;">on</span> {{!}} off; default: <b>off</b></td>
        <td>Enable keep alive.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Keep alive time</td>
     <td><span style="color: blue;">Keep alive time</span></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
         <td>Close TCP connections everytime data is sent or received (might result in serial data loss).</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Keep alive interval</td>
     <td><span style="color: blue;">Keep alive interval</span></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>The interval between subsequential keepalive probes.</td>
         <td>The interval between subsequential keepalive probes.</td>
     </tr>
     </tr>
     <tr>
     <tr>
     <td>Keep alive probes</td>
     <td><span style="color: blue;">Keep alive probes</span></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>integer [0..32000]; default: <b>0</b></td>
         <td>The number of unacknowledged probes.</td>
         <td>The number of unacknowledged probes.</td>
Line 777: Line 718:
Then enter the IP address and save.
Then enter the IP address and save.


[[File:Networking_rutos_manual_console_ip_filter_instance.png|border|class=tlt-border]]}}
[[File:Networking_rutos_manual_console_ip_filter_instance.png|border|class=tlt-border]]


[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]

Latest revision as of 13:56, 12 November 2024

The information in this page is updated in accordance with firmware version .


Summary

The Serial Utilities page is used to make serial communication configurations of different types. This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.



Console

Console mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.

Status

General settings

Field Value Description
Enable off | on; default: off Turns the instance on or off.
Name string; default: none Instance name, generated by the user when first creating the configuration.
Device ; default: Specifies which serial port will be used for serial communication.
Data bits 8; default: 8 Number of data bits for each character.
Stop bits 1 | 2; default: 1 Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.
Parity None | Odd | Even | Mark | Space; default: None In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
  • None (N) - no parity method is used.
  • Odd (O) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.
  • Even (E) - the parity bit is set so that the number of "logical ones (1s)" has to be even.
Flow control None; default: None In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.

Over IP

The Over IP serial type is used to manage serial connections over a TCP/IP network.

Instance Example

Here's an example demonstrating Over IP in action, running in Client + Server Mode.

Serial Device Configuration

Configure serial port communication parameters in the Serial Device Configuration section.

[[File:Networking_rutos_manual_serial_utilities_over_ip_serial_default_{{{default}}}_v2.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: off Turns the instance on or off.
Name string; default: none Instance name, generated by the user when first creating the configuration.
Device ; default: Specifies which serial port will be used for serial communication.
Data bits 8; default: 8 Number of data bits for each character.
Stop bits 1 | 2; default: 1 Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.
Parity None | Odd | Even | Mark | Space; default: None In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
  • None (N) - no parity method is used.
  • Odd (O) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.
  • Even (E) - the parity bit is set so that the number of "logical ones (1s)" has to be even.
Flow control None; default: None In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.

Over IP Configuration Settings

You can configure network related parameters of the serial connection in the Over IP Configuration secion.

Field Value Description
Mode Server | Client | Client + server | Bidirect; default: Server This device's role in the connection:
  • Server - the device waits for incoming connections.
  • Client - the device initiates the connection.
  • Client + server - launches service in server and client(s) mode simultaneously.
  • Bidirect - acts as client by default but waits for incoming connections at the same time.
Protocol TCP | UDP; default: TCP Protocol used in the communication process.
Client: Destination address IP | Port; default: empty Specify server address and port for client to connect to. E.g first field for address second for port. 16 destination addresses are allowed.
Server: UDP: Predefined addresses IP | Port; default: empty Set predefined IP and port for UDP connection. E.g first field for address second for port.
Listening port [1..65535]; default: empty When enabled, all data will be transmitted transparently.

Field Value Description
Use TLS/SSL off | on; default: off Mark to use TLS/SSL for connection.
TLS version Support all | tlsv1.0 | tlsv1.1 | tlsv1.2 | tlsv1.3; default: Support all Minimum TLS version allowed to be used.
TLS type Certificate based | Pre-Shared-Key based; default: Certificate based Select the type of TLS encryption.
Require certificate off | on; default: on Demand certificate and key from peer and verify them against certificate authority.
Verify host off | on; default: off Check if the server certificates Common Name (CN) matches hostname to which client is connecting.
Certificate files from device off | on; default: off Choose this option if you want to select certificate files from device.
Certificate files can be generated <a class=link href="/system/admin/certificates/generation">here</a>.
Certificate file .crt file; default: none Upload certificate file.
Key file .key file; default: none Upload key file.
CA file .ca file; default: none Upload CA file.
Pre-Shared-Key string; default: none The pre-shared-key in hex format with no leading “0x”.
Identify string; default: none Specify the identity.

Field Value Description
Raw mode off | on; default: on When enabled, all data will be transmitted transparently.
Remove all zeros off | on; default: off When checked, indicates that the first hex zeros should be skipped.
Inactivity timeout integer [0..36000]; default: 300 Specifies period of time in seconds, where server connection must be inactive, to disconnect client. To disable timeout input 0.
Serial timeout integer [0..1000]; default: none Specifies the maximum milliseconds to wait for serial data.
Max clients integer [1..32]; default: 4 Specify how many clients are allowed to connect simultaneously.
TCP echo on | off; default: off Enable software TCP echo.
Close connections on | off; default: off Close TCP connections everytime data is sent or received (might result in serial data loss).
Keep alive on | off; default: off Enable keep alive.
Keep alive time integer [0..32000]; default: 0 Close TCP connections everytime data is sent or received (might result in serial data loss).
Keep alive interval integer [0..32000]; default: 0 The interval between subsequential keepalive probes.
Keep alive probes integer [0..32000]; default: 0 The number of unacknowledged probes.

IP Filter

The IP Filter section is used for configuring which network is allowed to communicate with the device. You may add a new instance by selecting the Interface and pressing Add.

Then enter the IP address and save.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_serial_utilities&oldid=136281"