Template:Networking rutos manual mobile: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>[[Media:{{{fw_version}}}_single.bin|{{{fw_version}}}]...")
 
No edit summary
 
(154 intermediate revisions by 11 users not shown)
Line 1: Line 1:
<span style="color: red;">The information in this page is updated in accordance with the <span style="color: #0054A6;"><b>[[Media:{{{fw_version}}}_single.bin|{{{fw_version}}}]]</b></span> firmware version.</span>
{{Template: Networking_device_manual_fw_disclosure
| series = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==


==Summary==
The <b>Mobile</b> page is used to configure mobile connection settings.
 
This manual page provides an overview of the Mobile page in {{{name}}} devices.


The '''Mobile''' page is used for setting parameters related to the mobile data connection. This page is an overview of the Mobile section for {{{name}}} devices.
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = {{{series}}}
}}


==General==
==General==


The '''General''' section is used to configure the SIM card parameters that define how the router establishes connection and uses other, mobile related, useful features.
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.


===SIM card settings===
===SIM card settings===
----
----
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.


The '''SIM card settings''' section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]
[[File:Networking_RUTXxx_manual_mobile_general_simcard_settings_v1.png|border|class=tlt-border|1036x1036px]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
       <th>value</th>
       <th>Value</th>
       <th>description</th>
       <th>Description</th>
    </tr>{{#ifeq: {{{dualmodem}}} | 0 | {{#ifeq: {{{dualsim}}} | 1 |
    <tr>
      <td>Default SIM</td>
      <td>off {{!}} on; default: <b>on</b></td>
      <td>Sets this SIM slot as the default one.</td>
    </tr>|}} |}}
    <tr>
      <td>Deny data roaming</td>
      <td>off | on; default: <b>off</b></td>
      <td>Denies data connection on roaming conditions.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Default SIM</td>
       <td>PIN</td>
       <td>off | on; Default: " "</td>
      <td>integer [0000..99999999]; default: <b>none</b></td>
       <td>Set this SIM slot as default</td>
      <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
    </tr>
</table>
 
===Interface mob1s1a1 APN configuration===
 
[[File:Networking rutos manual mobile general interface configuration.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Auto APN</td>  
       <td>on | <span style="color:red">off</span>; default: <b>on</b></td>
       <td>Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database )</td>
    </tr>
    <tr>
      <td>APN</td>
      <td>string; default: <b>none</b></td>
      <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:
            <ul>
                <li>rac;</li>
                <li>lac;</li>
                <li>sgsn;</li>
                <li>rnc;</li>
            </ul>it cannot end in:
            <ul>
                <li>.gprs;</li>
            </ul>and it cannot contain the asterisk symbol (<b>*</b>).
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Deny data roaming</td>
       <td><span style="color:red">Authentication type</span></td>  
       <td>off | on; Default: '''off'''</td>
       <td>None | <span style="color:green">PAP | CHAP</span>; default: <b>None</b></td>
       <td>Deny data connection on roaming</td>
       <td>Authentication method that your carrier uses to authenticate new connections on it's network</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Service mode</td>
       <td><span style="color:green">Username</span></td>  
       <td>Default: '''Auto'''</td>
       <td>string; default: <b>empty</b></td>
       <td>Your network's preference. If your local mobile network supports UMTS (3G) or LTE (4G) you can specify to which network you prefer to connect to. Available options:
       <td>Username provided by your carrier</td>
* '''Auto'''
* '''4G (LTE) only'''
* '''3G only'''
</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>PIN</td>
       <td><span style="color:green">Password</span></td>  
       <td>Default: " "</td>
       <td>string; default: <b>empty</b></td>
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user</td>
       <td>Password provided by your carrier</td>
     </tr>
     </tr>
</table>
==Connection==
===Connection===
{{#switch: {{{name}}}
|#default = [[File:Networking_rutos_manual_mobile_connection_connection.png|border|class=tlt-border]]
|TRB245|RUT956|RUT951|RUT906|RUT901|RUT241 = [[File:Networking_rutos_manual_mobile_connection_connection_2g.png|border|class=tlt-border]]
|TRB256 = [[File:Networking_rutos_manual_mobile_connection_connection_trb2m.png|border|class=tlt-border]]
|RUTX50|TRB500|RUTM50|RUTC50|RUTM51|RUTM52 = [[File:Networking_rutos_manual_mobile_connection_connection_5g.png|border|class=tlt-border]]}}
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>{{#switch:{{{name}}}|RUT230|TRB255|TRB256=|#default=
    <tr>
      <td>VoLTE</td>
      <td>Auto {{!}} On {{!}} Off; default: <b>Auto</b></td>
      <td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td>
    </tr>}}
    <tr>{{#switch:{{{name}}}|TRB256=|#default=
      <td>Preferred network type</td>
      <td>{{#switch: {{{series}}}
|RUTX|RUTM|RUTC = {{#switch: {{{name}}}
        |RUTX50|RUTC50|RUTM52|RUTM54 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
        |RUTM50|RUTM51 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>
        |#default = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
|TRB5 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
|RUT36X|TCR1|RUT361|TRB16 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
|TRB1|RUT9|RUT9M|OTD140 = {{#switch: {{{name}}}
        |RUT976 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>
        |#default = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
|RUT2M = {{#switch: {{{name}}}
        |RUT241|RUT200 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
        |RUT260 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
        |RUT271 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>}}
|TRB2 = {{#switch: {{{name}}}
        |TRB245 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
        |TRB255 = 4G/2G auto {{!}} 4G only {{!}} 2G only; default: <b>4G/2G auto</b>}}
|TRB2M = {{#switch: {{{name}}}
        |TRB246 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
|RUT2 = {{#switch: {{{name}}}
        |RUT230 = 3G/2G auto {{!}} 3G only {{!}} 2G only; default: <b>3G/2G auto</b>
        |RUT240 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
|RUT206 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
        </td>
  </tr>}}
{{#switch: {{{name}}}
        |RUTX50|RUTM50|RUTC50|TRB500|RUTM51|RUTM52|RUTM54 =
    <tr>
        <td>5G mode</td>
        <td>Auto {{!}} NSA {{!}} SA default: <b>Auto</b></td>
        <td>Specifies the 5G mode being used. Auto-checks available options. NSA (Non-Standalone) can be used with existing 4G and 5G infrastructure. SA (Standalone) requires only 5G infrastructure.</td>
    </tr>
}}
{{#switch: {{{name}}} |TRB255|TRB256=
    <tr>
      <td>Network Category</td>
      <td>M1+NB auto {{!}} M1 only {{!}} NB only; default: <b>M1+NB auto</b></td>
      <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Network type is set to <i>4G/2G auto {{!}} 4G only</i>.</td>
    </tr>|#default=}}
     <tr>
     <tr>
       <td>Band selection</td>
       <td>Band selection</td>
       <td>Auto | Manual (UMTS bands: WCDMA 2100, WCDMA 1800, WCDMA 850, WCDMA 900; LTE bands: B1, B3, B5, B7, B8, B20, B32, B38, B40, B41.); Default: '''Auto'''</td>
       <td>Auto {{!}} <span style="color:blue">Manual</span>; default: <b>Auto</b></td>
       <td>Network band selection</td>
      <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only.</td>
    </tr>{{#ifeq: {{{M1+NB}}}|1|
    <tr>
    <td><span style="color:blue">CAT-M1 bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>
    <tr>
    <td><span style="color:blue">CAT-NB bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>|}}{{#ifeq: {{{5G}}}|1|
    <tr>
    <td><span style="color:blue">5G bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>|}}{{#ifeq: {{{4G}}}|1|
    <tr>
    <td><span style="color:blue">LTE bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>|}}{{#ifeq: {{{3G}}}|1|
    <tr>
    <td><span style="color:blue">UMTS bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>|}}{{#ifeq: {{{2G}}}|1|
    <tr>
    <td><span style="color:blue">GSM bands</span></td>
      <td>Band list; default: <b>empty</b></td>
      <td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
    </tr>|}}
</table>
{{#ifeq: {{{name}}}|RUT200| |
===Low signal reconnect===
----
The <b>Low signal reconnect</b> section is used to configure modem operator connection resetting based on signal strength {{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 
[[File:Networking_rutos_manual_mobile_general_low_signal_reconnect_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Enables Low signal reconnect.</td>
    </tr>
    <tr>
      <td>Reset threshold</td>
      <td>integer [-120..-50]; default: <b>none</b></td>
      <td>Signal threshold in dB for the connection. When signal is under this value modem resets connection.</td>
    </tr>
    <tr>
      <td>Reset timeout</td>
      <td>integer [15..65535]; default: <b>600</b></td>
       <td>Time for the device to wait in seconds before trying to reset the connection again.</td>
     </tr>
     </tr>
</table>
</table>
}}
{{#ifeq: {{{name}}} | TRB500 | |
==Limits==


===Operator settings===
===Data limit===
----
----
The <b>Data Limit</b> section provides you with the possibility to set up a maximum used data cap for your SIM card.


The '''Operator settings''' section is used for applying a blacklist or whitelist for undesired or desired operators.  
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_data_limit_dualmodem.png|border|class=tlt-border]] |#default = [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}


[[File:Networking_RUTXxx_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border|1036x1036px]]
To configure <b>Data Limit</b> press <b>Edit</b>


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
       <th>value</th>
       <th>Value</th>
       <th>description</th>
       <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable data connection limit</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Enable or disable operator filtering</td>
      <td>Disables mobile data when the limit for the current period is reached</td>
    </tr>
    <tr>
      <td>Data limit (MB)</td>
      <td>integer; default: <b>none</b></td>
      <td>Disable mobile data after the limit value in MB is reached</td>
    </tr>
    <tr>
      <td>Reset period</td>
       <td>Day {{!}} Week {{!}} Month; default: <b>Day</b></td>
      <td>Interval for resetting mobile data usage limit.</td>
    </tr>
    <tr>
      <td>Reset time</td>
      <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
      <td>Specify the hour (in 24-hour format) when the mobile data limit reset occurs.</td>
    </tr>
    <tr>
      <td>Enable SMS warning</td>
      <td>on {{!}} off; default: <span style="color:red"><b>off</b></span></td>
      <td>Enables sending of warning SMS message when mobile data limit is reached.</td>
    </tr>
    <tr>
      <td><span style="color:red">Warning threshold</span></td>
      <td>integer; default: <b>none</b></td>
      <td>Send warning SMS message after threshold in MB is reached. Warning threshold cannot be higher than data limit!</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Mode</td>
       <td><span style="color:red">Phone number</span></td>
       <td>Default: '''Whitelist'''</td>
       <td>integer; default: <b>none</b></td>
       <td>Defines how operators will be filtered.
       <td>A phone number to send warning SMS message to</td>
 
* '''Blacklist''' - operators contained in the blacklist are considered forbidden and your router will not attempt to connect to them even if they are available.
* '''Whitelist''' - operators contained in the whitelist will be the only operators that the router will be trying to connect to. Other operators that are not in the whitelist will be considered forbidden.
</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Operator list</td>
       <td>Clear collected data</td>
       <td>Default:</td>
       <td>- (interactive button)</td>
       <td>Operators code list name. You can create a list in [[#Operators_list|network operators]] page</td>
       <td>The data collected for this interface will be cleared, but only if the interface is active</td>
     </tr>
     </tr>
</table>
</table>


===SMS limit settings===
}}
 
===SMS limit===
 
----
----
The <b>SMS Limit</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.


The '''SMS limit settings''' section provides you with the possibility to set SMS limit for your SIM card.
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_sms_limit_dualmodem.png|border|class=tlt-border]] |#default = [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
 
----
To configure <b>SMS Limit</b> press <b>Edit</b>


[[File:Networking_RUTXxx_manual_mobile_general_sms_limit_settings_v1.png|border|class=tlt-border|1036x1036px]]
[[File:Networking_rutos_manual_mobile_limit_sms_limit_configuration.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
       <th>value</th>
       <th>Value</th>
       <th>description</th>
       <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable SMS Limit</td>
       <td>Enable SMS Limit</td>
       <td>off | on; default: '''off'''</td>
       <td>off | on; default: <b>off</b></td>
       <td>Enable of disable SMS limit feature</td>
       <td>Turns SMS limiting on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>SMS limit count</td>
       <td>SMS limit count</td>
       <td>Default:</td>
       <td>integer; default: <b>none</b></td>
       <td>Disable SMS sending after limit value is reached</td>
       <td>Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Period</td>
       <td>Period</td>
       <td>Default: '''Day'''</td>
       <td>Day | Week | Month; default: <b>Day</b></td>
       <td>Period for which SMS limiting should apply. Available options:
       <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td>
* '''Day'''
    </tr>
* '''Week'''
    <tr>
* '''Month'''
      <td>Reset time</td>
</td>
      <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
      <td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td>
    </tr>
    <tr>
      <td>Clear SMS Limit</td>
      <td>- (interactive button)</td>
      <td>Clears the SMS limit counter for the selected period.</td>
     </tr>
     </tr>
</table>
</table>


This section also contains one button - '''Clear SMS limit'''. When clicked, the button resets the sms limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
 
==SIM Switch==
===SIM switch===
----


In '''SIM switch''' section you can configure SIM switching rules, i.e., set up circumstances under which the router will perform a switch from using one SIM card to the other. Refer to the figure and table below for information.
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.


[[File:Networking_RUTXxx_manual_mobile_general_sim_switch_settings_v1.png|border|class=tlt-border|1036x1036px]]
[[File:Networking_rutos_manual_mobile_sim_switch_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
       <th>value</th>
       <th>Value</th>
       <th>description</th>
       <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Enable automatic switching</td>  
       <td>Enable automatic switching</td>  
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Automatically switch between primary and secondary SIM cards based on the various rules and criterias</td>
       <td>Turns automatic SIM switching on or off.</td>
    </tr>
    <tr>
      <td>Check interval</td>
      <td>integer [3..3600]; default: <b>30</b></td>
      <td>The frequency (in seconds) at which the device will check for SIM switch conditions. If such a condition exists, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field passes.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On weak signal</td>
      <td>Attempts before SIM switch</td>
       <td>off | on; default: '''off'''</td>
      <td>integer [1..10]; default: <b>3</b></td>
       <td>Perform a SIM card switch when a signal's strength drops below a certain threshold</td>
      <td>How many times a condition will be checked before executing a SIM switch. For example, if the device is a state that meets at least one SIM switch condition, the device will perform a number of additional checks specified in this field and will perform a SIM switch only if the condition is met on every check.</td>
    </tr>
    <tr>
       <td>On weak signal<span style="color:red">*</span></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
    </tr>
    <tr>
      <td><span style="color:red">*Signal strength (dBm)</span></td>
      <td>integer [-120..-50]; default: <b>-90</b></td>
      <td>Lowest signal's strength value (RSSI) in dBm below which a SIM card switch should occur. More information: [[RSSI|RSSI]]</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On data limit</td>
       <td>On data limit</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when mobile data limit for your current SIM card is exceeded</td>
       <td>Performs a SIM switch when the mobile data limit for this SIM card is reached. You can set up a mobile data limit in the Network → [[{{{name}}} WAN|WAN]] (Basic WebUI mode) or Network → [[{{{name}}} Interfaces|Interfaces]] (Advanced WebUI mode) pages by clicking 'Edit' next to the interface you wish limit the data for.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On SMS limit</td>
       <td>On SMS limit</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when sent SMS limit for your current SIM card is exceeded</td>
       <td>Performs a SIM switch when the SMS limit for this SIM card is reached. You can set up SMS limit in the Network → Mobile → [[#General|General]] page.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On roaming</td>
       <td>On roaming</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when roaming is detected</td>
       <td>Performs a SIM switch when roaming conditions are detected.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>No network</td>
       <td>No network</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when network isn't detected</td>
       <td>Performs a SIM switch when a network connection is not available.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On network denied</td>
       <td>On network denied</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when network is denied</td>
       <td>Performs a SIM switch when access to a network is denied by an operator.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>On data connection fail</td>
       <td>On data connection fail</td>
       <td>off | on; default: '''off'''</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Perform a SIM card switch when data connection fails</td>
       <td>Performs a SIM switch when mobile data connection fails. Possible failure determination methods are:
            <ul>
                <li><b>LCP echo</b></li>
                <li><b>ICMP echo</b></li>
            </ul>If no echo is received, the data connection is considered to be down.
        </td>
     </tr>
     </tr>
</table>
</table>


==Network operators==
When configuring SIM switching from the Secondary card, an additional field called "Switch back to primary SIM card after timeout" becomes available:
 
[[File:Networking_rutos_manual_mobile_sim_management_sim_switching_rules_back_to_primary.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Switch back to primary SIM card after timeout</td>
      <td>yes {{!}} no; default: <b>no</b></td>
      <td>Attempts to switch back to the primary SIM card once the specified period of time passed.</td>
    </tr>
    <tr>
      <td>Initial timeout (min)</td>
      <td>integer; default: <b>1</b></td>
      <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
    </tr>
</table>|}}|}}


The '''Network operators''' tab provides you with the possibility to scan for and manually manage mobile network operators to which the router's SIM card can connect to. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the SIM Management section.
{{#switch: {{{name}}}|TRB255|TRB256= |#default=
==Network selection==
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}|}}


[[File:Networking_RUTXxx_manual_mobile_network_operatorts_scan_settings_v1.png|border|class=tlt-border|1036x1036px]]
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualmodem.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
    <tr>
      <td>Active SIM</td>
      <td>SIM 1 {{!}} SIM 2; default: <b>SIM 1</b></td>
      <td>Displays which SIM card is currently active.</td>
    </tr>|
    <tr>
      <td>Modem</td>
      <td>Primary modem {{!}} Secondary modem; default: <b>Primary modem</b></td>
      <td>Operator scanning will be performed on the chosen modem.</td>
    </tr>}} |}}
    <tr>
      <td>Current operator</td>
      <td>string; default: <b>none</b></td>
      <td>Displays the name of the operator the which the device is currently connected.</td>
    </tr>
    <tr>
      <td>Connection mode</td>
      <td>Auto {{!}} Manual {{!}} Manual-Auto; default: <b>Auto</b></td>
      <td>Operator selection method.
            <ul>
                <li><b>Auto</b> - selects the operator automatically.</li>
                <li><b>Manual</b> - requires you to select the operator manually. (More on this selection [[#Manual_operator_selection|below]].)</li>
            </ul>
        </td>
    </tr>
</table>}}


===Operators scan settings===
===Manual operator selection===
----
----
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v2.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]] }}


As default '''Connection mode''' is set to '''AUTO''', although to initiate a scan, select connection mode '''Manual''', press '''Scan for operators''' and then you will be prompted with a pop-up asking if you wish to proceed. This is because while the scan is in progress you will lose your data connection for up to 3 minutes.  
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.


[[File:Networking_RUTXxx_manual_mobile_network_operatorts_manual_scan_v1.png|border|class=tlt-border|1036x1036px]]
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2_v2.png|border|class=tlt-border]]


In order to configure a specific band, simply select which one you want to use and press '''Save & Apply'''
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
 
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3_v2.png|border|class=tlt-border]]
----
Once the scan has finished, you will see the results in the 'Available operators'.
 
[[File:Networking_rutos_manual_mobile_network_operators_operators_list_v2.png|border|class=tlt-border]]
 
In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.


===Operators list===
===Operators list===
----
----
The '''Operators list''' section is used for creating a blacklist or whitelist for undesired or desired operators. In order to create a list, enter a '''Name''' and click '''ADD'''.
This section is used to create lists of operators codes, which can then be used in [[#Operator settings|Operator settings section]]
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
 
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v2.png|border|class=tlt-border]]
 
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]
on a list you will be redirected to editing page in which you can enter operator codes for that list.
 
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v3.png|border|class=tlt-border]]
 
==Utilities==
 
===SIM PIN management===
 
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking rutos manual mobile utilities sim pin dualmodem.png|border|class=tlt-border]] | [[File:Networking rutos manual mobile utilities sim pin v1.png|border|class=tlt-border| 1102px]]}}
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>SIM card lock</td>
      <td>off | on; default: <b>off</b></td>
      <td>Correct PIN code is required to enable or disable SIM card lock. Once SIM card lock is disabled you will not need to enter PIN code on any device to use SIM card.</td>
    </tr>
    <tr>
      <td>Change PIN</td>
      <td>- (interactive button)</td>
      <td>Open modal window to change SIM PIN</td>
    </tr>
</table>
 
{{#ifeq: {{{ussd}}} | 1 |
===USSD===
----
<b>Unstructured Supplementary Service Data (USSD)</b> is communication protocol used in communication between cellular devices and mobile network operators. It is usually used with prepaid SIM cards to enable/disable certain services or to obtain information from a network operator.
 
This section provides the possibility to send USSD messages to the mobile operator.
 
[[File:Networking_rutos_manual_mobile_general_ussd_v2.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>USSD</td>
      <td>string; default: <b>none</b></td>
      <td>Enter a USSD code (up to 182 character) that you wish to send. To send the entered USSD code, click the 'Send' button below the Response box.</td>
    </tr>
    <tr>
      <td>Send</td>
      <td>- (interactive button)</td>
      <td>Click to send the message entered in the USSD field.</td>
    </tr>
    <tr>
      <td>Response message</td>
      <td>string; default: <b>No response yet</b></td>
      <td>Displays the response to the last sent USSD message. Receiving the response may take up to a minute.</td>
    </tr>
</table>
|}}
 
===PIN/PUK lock notification===
----
If you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked.  Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes.


[[File:Networking_RUTXxx_manual_mobile_network_operatorts_list_v1.png|border|class=tlt-border|1036x1036px]]
Side message where the SIM is locked
[[File:Networking_rutos_manual_mobile_general_pin.png|border|class=tlt-border]]


In order to configure it, click '''Edit'''. Refer to the figure and table below for information.
Side message where the SIM is blocked
[[File:Networking_rutos_manual_mobile_general_puk.png|border|class=tlt-border]]


[[File:Networking_RUTXxx_manual_mobile_network_operatorts_list_settings_v1.png|border|class=tlt-border|1036x1036px]]
[[File:Networking_rutos_manual_mobile_general_pin_puk.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
         <th>field name</th>
         <th>Field</th>
       <th>value</th>
       <th>Value</th>
       <th>description</th>
       <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Operators lsit name</td>  
       <td>PIN</td>  
       <td>Default:</td>
       <td>4-8 positive numeric chars (positive number); default: <b>none</b></td>
       <td>Name of operators list</td>
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.</td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Operator code</td>
       <td>PUK</td>  
       <td>Default:</td>
       <td>8 positive numeric chars (positive number); default: <b>none</b></td>
       <td>Operator's code used to identify a network operator. Allowed characters: (0-9)</td>
       <td>SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code</td>
     </tr>
     </tr>
</table>
</table>


'''Important:''' be mindful when using the '''Operators list''' function as it very easy to block yourself from the right operators and lose your data connection.  
==APN Database==
 
APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records.
<b>Note:</b> APN Database is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 
[[File:Network rutos mobile apn database.png|border|class=tlt-border]]
 
===Adding new APN===
----
In order to create new APN to database, insert required information and click Add button.
 
[[File:Network rutos mobile apn database add button.png|border|class=tlt-border]]
 
[[File:Network rutos mobile apn database entry configuration.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Carrier name</td>
      <td>default: <b>empty</b></td>
      <td>Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider. </td>
    </tr> 
    <tr>
        <td>Mobile Country Code</td>
      <td>default: <b>empty</b></td>
      <td>Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs. </td>
    </tr>
    <tr>
        <td>Mobile Network Code</td>
      <td>default: <b>empty</b></td>
      <td>Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator. </td>
    </tr> 
    <tr>
        <td>APN</td>
      <td>default: <b>empty</b></td>
      <td>APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier </td>
    </tr> 
    <tr>
        <td>PDP type</td>
      <td>IPv4/IPv6 | IPv4 | IPv6; default: <b>IPv4/IPv6</b></td>
      <td>Specifies what type of address is requested from the operator </td>
    </tr> 
    <tr>
        <td>Authentication type</td>
      <td>none | <span style="color:red">PAP</span> | <span style="color:red">CHAP</span>; default: <b>none</b></td>
      <td>Authentication method that your GSM carrier uses to authenticate new connections on it's network </td>
    </tr> 
    <tr>
        <td><span style="color:red">Username</span></td>
      <td>default: <b>empty</b></td>
      <td>Your username that you would use to connect to your GSM carrier's network </td>
    </tr> 
    <tr>
        <td><span style="color:red">Password</span></td>
      <td>default: <b>empty</b></td>
      <td>Your password that you would use to connect to your GSM carrier's network </td>
    </tr>
</table>
 
{{#ifeq: {{{dualsim}}} | 1 |
==SIM Idle Protection==
Some operators block user SIM cards after a period of inactivity. The <b>SIM Idle Protection</b> tab provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.
 
<b>Note:</b> SIM Idle Protection is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 
[[File:Networking_rutos_mobile_sim_idle_protection.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Turns SIM Idle Protection on or off.</td>
    </tr>
    <tr>
      <td>Period</td>
      <td>Month {{!}} Week; default: <b>Month</b></td>
      <td>How often SIM Idle Protection will be performed. Use the two following fields ('Day' and 'Time') to set the exact time of the action.</td>
    </tr>
    <tr>
      <td>Day</td>
      <td>integer [1..30]; default: <b>1</b></td>
      <td>TThe day of the month on which SIM Idle Protection will be performed.</td>
    </tr>
    <tr>
      <td>Time</td>
      <td>hh:mm; default: <b>01:00</b></td>
      <td>The time when SIM Idle Protection will be performed.</td>
    </tr>
    <tr>
      <td>IP type</td>
      <td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
      <td>IP type to be used for ping.</td>
    </tr>
    <tr>
      <td>Host to ping</td>
      <td>ip; default: <b>8.8.8.8</b></td>
      <td>IP address of a host that will be pinged during the SIM Idle Protection action.</td>
    </tr>
    <tr>
    <td>Ping package size</td>
        <td>integer [1..1000]; default: <b>56</b></td>
        <td>ICMP packet size in bytes.</td>
    </tr>
    <tr>
    <td>Ping requests</td>
        <td>integer [1..30]; default: <b>2</b></td>
        <td>How many ping requests will be sent.</td>
    </tr>
</table>|}}


[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]

Latest revision as of 09:46, 14 November 2024

The information in this page is updated in accordance with firmware version .


Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

SIM card settings

The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.


[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]

Field Value Description
Deny data roaming off | on; default: off Denies data connection on roaming conditions.
PIN integer [0000..99999999]; default: none SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored.

Interface mob1s1a1 APN configuration

Field Value Description
Auto APN on | off; default: on Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database )
APN string; default: none An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract.
An APN Network Identifier cannot start with any of the following strings:
  • rac;
  • lac;
  • sgsn;
  • rnc;
it cannot end in:
  • .gprs;
and it cannot contain the asterisk symbol (*).
Authentication type None | PAP | CHAP; default: None Authentication method that your carrier uses to authenticate new connections on it's network
Username string; default: empty Username provided by your carrier
Password string; default: empty Password provided by your carrier

Connection

Connection


Field Value Description
VoLTE Auto | On | Off; default: Auto Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.
Preferred network type
Band selection Auto | Manual; default: Auto Network frequency band selection method. When set to Auto, the device connects to the band with the best connectivity conditions, while Manual provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only.

Low signal reconnect

The Low signal reconnect section is used to configure modem operator connection resetting based on signal strength .

Field Value Description
Enable off | on; default: off Enables Low signal reconnect.
Reset threshold integer [-120..-50]; default: none Signal threshold in dB for the connection. When signal is under this value modem resets connection.
Reset timeout integer [15..65535]; default: 600 Time for the device to wait in seconds before trying to reset the connection again.

Limits

Data limit

The Data Limit section provides you with the possibility to set up a maximum used data cap for your SIM card.

[[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]

To configure Data Limit press Edit

Field Value Description
Enable data connection limit off | on; default: off Disables mobile data when the limit for the current period is reached
Data limit (MB) integer; default: none Disable mobile data after the limit value in MB is reached
Reset period Day | Week | Month; default: Day Interval for resetting mobile data usage limit.
Reset time 0-23 / Monday - Sunday / 0-31; default: 0 Specify the hour (in 24-hour format) when the mobile data limit reset occurs.
Enable SMS warning on | off; default: off Enables sending of warning SMS message when mobile data limit is reached.
Warning threshold integer; default: none Send warning SMS message after threshold in MB is reached. Warning threshold cannot be higher than data limit!
Phone number integer; default: none A phone number to send warning SMS message to
Clear collected data - (interactive button) The data collected for this interface will be cleared, but only if the interface is active

SMS limit

The SMS Limit section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

[[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]

To configure SMS Limit press Edit

Field Value Description
Enable SMS Limit off | on; default: off Turns SMS limiting on or off.
SMS limit count integer; default: none Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period Day | Week | Month; default: Day Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Reset time 0-23 / Monday - Sunday / 0-31; default: 0 Starting hour of the day / day of the week / day of the month for SMS limiting period.
Clear SMS Limit - (interactive button) Clears the SMS limit counter for the selected period.


Network selection

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]

Field Value Description
Current operator string; default: none Displays the name of the operator the which the device is currently connected.
Connection mode Auto | Manual | Manual-Auto; default: Auto Operator selection method.
  • Auto - selects the operator automatically.
  • Manual - requires you to select the operator manually. (More on this selection below.)

Manual operator selection

To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Once the scan has finished, you will see the results in the 'Available operators'.

In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.

Operators list

This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).

By clicking Edit on a list you will be redirected to editing page in which you can enter operator codes for that list.

Utilities

SIM PIN management

Field Value Description
SIM card lock off | on; default: off Correct PIN code is required to enable or disable SIM card lock. Once SIM card lock is disabled you will not need to enter PIN code on any device to use SIM card.
Change PIN - (interactive button) Open modal window to change SIM PIN


PIN/PUK lock notification

If you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked. Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes.

Side message where the SIM is locked

Side message where the SIM is blocked

Field Value Description
PIN 4-8 positive numeric chars (positive number); default: none SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.
PUK 8 positive numeric chars (positive number); default: none SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code

APN Database

APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records. Note: APN Database is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Adding new APN

In order to create new APN to database, insert required information and click Add button.

Field Value Description
Carrier name default: empty Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider.
Mobile Country Code default: empty Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs.
Mobile Network Code default: empty Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator.
APN default: empty APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier
PDP type IPv4/IPv6 | IPv4 | IPv6; default: IPv4/IPv6 Specifies what type of address is requested from the operator
Authentication type none | PAP | CHAP; default: none Authentication method that your GSM carrier uses to authenticate new connections on it's network
Username default: empty Your username that you would use to connect to your GSM carrier's network
Password default: empty Your password that you would use to connect to your GSM carrier's network


[[Category:{{{name}}} Network section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile&oldid=136639"