Template:Networking rut9xx firmware change log: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
(Replaced content with "===<b>RUT9_R_00.07.00.2</b> | 2021.10.19 === * <b>Fixes</b> ** Fixed NMEA sentence validation for Meig modems ==='''RUT9_R_00.07.00''' | 2021.07.16 === * <b>New features</b> ** New, RUTX-like WebUI style ** New WebUI based on Vue.js 2.6.12 ** RutOS updated to OpenWrt 19.07.7 base ** DNP3 Master and DNP3 Oustation ** 'Restore to user's defaults' SMS Utilities rule ** DHCP Relay AT command *...")
Tag: Replaced
 
(39 intermediate revisions by 2 users not shown)
Line 1: Line 1:
===='''[[Media:RUT9_R_00.07.00 WEBUI.bin|RUT9_R_00.07.00]]''' | 2021.07.16 ====
===<b>[[Media:RUT9_R_00.07.00.2 WEBUI.bin|RUT9_R_00.07.00.2]]</b> | 2021.10.19 ===
 
* <b>Fixes</b>
** Fixed NMEA sentence validation for Meig modems
 
==='''[[Media:RUT9_R_00.07.00 WEBUI.bin|RUT9_R_00.07.00]]''' | 2021.07.16 ===


* <b>New features</b>
* <b>New features</b>
** New, RUTX-like WebUI style
** New WebUI based on Vue.js 2.6.12
** New WebUI based on Vue.js 2.6.12
** RutOS updated to OpenWrt 19.07.7 base
** RutOS updated to OpenWrt 19.07.7 base
** DNP3 Master and DNP3 Oustation
** DNP3 Master and DNP3 Oustation
** 'Restore to user's defaults' SMS Utilities rule
** 'Restore to user's defaults' SMS Utilities rule
** New, RUTX-like WebUI style
** DHCP Relay AT command
** DHCP Relay AT command


Line 20: Line 25:
** Updated ncurses to version 6.2
** Updated ncurses to version 6.2
** Updated OpenSSL to version 1.1.1k
** Updated OpenSSL to version 1.1.1k
** Added glib2 patch to fix CVE-2019-13012 vulnerability
** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
** Added Busybox patch to fix CVE-2018-1000500 vulnerability
** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
** Added full MODBUS register address expansion specifier for Data to Server
** Added full MODBUS register address expansion specifier for Data to Server
** Added full MODBUS register address legend
** Added full MODBUS register address legend
Line 56: Line 56:
** Added support for multiple USB to Serial adapters
** Added support for multiple USB to Serial adapters
** Added option to send SMS warning messages to Hotspot users authenticated with SMS OTP when specified amount of data is used up
** Added option to send SMS warning messages to Hotspot users authenticated with SMS OTP when specified amount of data is used up
** Added "send analog input" option to TAVL settings


* <b>Fixes</b>
* <b>Fixes</b>
** Added glib2 patch to fix CVE-2019-13012 vulnerability
** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
** Added Busybox patch to fix CVE-2018-1000500 vulnerability
** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
** Fixed Android clients IPsec MTU/MSS size
** Fixed Android clients IPsec MTU/MSS size
** Fixed wrong IPsec DPD value saving
** Fixed wrong IPsec DPD value saving
** Changed IPsec PSK maximum length to 128 symbols
** Changed IPsec PSK maximum length to 128 symbols
** Fixed SSTP remainin up after package removal
** Fixed SSTP remaining up after package removal
** Fixed DMVPN crypto_proposal write to config
** Fixed DMVPN crypto_proposal write to config
** Fixed I/O Juggler's SMS sending to correct group
** Fixed I/O Juggler's SMS sending to correct group
Line 87: Line 93:
** Fixed P2P group information processing vulnerability in wpa_supplicant
** Fixed P2P group information processing vulnerability in wpa_supplicant
** Added validation to Walled Garden Address list field
** Added validation to Walled Garden Address list field
===='''[[Media:RUT9XX R 00.06.08.3 WEBUI.bin|RUT9XX_R_00.06.08.3]]''' | 2021.07.01 ====
* Fixes:
** Add Wireless security fixes for the FragAttacks vulnerabilities
===='''[[Media:RUT9XX R 00.06.08.2 WEBUI.bin|RUT9XX_R_00.06.08.2]]''' | 2021.06.10 ====
* Improvements:
** Updated OpenLayers to version 6.4.3
** Updated email text validation in I/O rules page
* Fixes:
** Fixed hotplug naming scheme typo for MeigLink modems
===='''RUT9XX_R_00.06.08.1''' | 2021.05.19 ====
* New features:
** "Frequency setting method" support for MODBUS Serial Master
** Added expansion specifiers and the option to schedule data to Data to Server service
** Spanish WebUI language support
** Japanese WebUI language support
** "Get active profile" SMS Utilities rule
* Improvements:
** Updated curl to version 7.74
** Updated pcre to version 8.44 version
** Updated sqlite3 to version 3.33
** Updated ncurses to version 6.2
** Updated libjson-c from version 13.1 to version  14
** Updated mosquitto to version 1.6.10
** Updated libpcap to version 1.10.0
** Updated hostapd to version 2019-08-08
** Updated tcpdump to version 4.9.3
** Updated strongswan to version 5.8.4
** Updated openvpn to version 2.5.2
** Added Verizon provider support for global modules
** Added additional command to get current operator names
** Added VoLTE configurable by SIM card config
** Added USB ZLP flag to avoid mobile network loss
** Added SIM URC event handling
** Extended new NMEA sentence PQXFI identification
** Changed mobile interface subnet to /32
** Added 'Bind to SIM' option to GRE Tunnel configuration
** Added 'Single number' and 'User group' choices to the "Network → Mobile → Mobile Data Limit" page
** Added new field called 'Base64 Encoding' to the "Services → SMS Gateway → Scheduled SMS" page
** Added new option called 'Get active profile' to the "Services → SMS Utilities" page
** Added new textbox called 'Services' to the "Services → SNMP" page
** Added warning below 'Message text' when Base64 encoding is enabled
** Added explanatory text in the "Services → SMS Gateway → Scheduled SMS" page for Message text field
** Added 'Base64 Encoding' field live base64 encoding/decoding of 'Message text' field
** Added TLS DHE + RSA cipher checkboxes and limited custom cipher amount in OpenVPN configuration
** Updated SMS free space field validation
** Added option to specify geofence name (%gn) to Events Reporting geofence rule
* Fixes:
** Fixed mobile authentication handling
** Added shellinabox patch to fix CVE-2018-16789
** Added ntfs-3g patch to fix CVE-2019-9755
** Added netifd patch to fix CVE-2021-22161
** Added odhcp6c patch to fix CVE-2021-22161
** Added json-c patch to fix CVE-2020-12762
** Added glib2 patches to fix CVE-2019-12450, CVE-2019-13012, CVE-2018-16248 and CVE-2018-16249
** Added prevention against possible unintended firsboot when JFFS2 magic number is invalid
** Fixed mobile MTU setting
** Changed SMS saving to modem on EC25V modules
** Added default APN for EC25V module
** Fixed SMS managing for EC25-V modules
** Changed operator name AT command
** Fixed PPP connection mode
** Fixed Operator List connection
** Fixed connection issues when WiFi is in Failover mode
** Fixed mobile interface Static Route management
** Fixed RMS mdcollect data to receive current data, not data for period
** Fixed RMS crashing after not reading analog input value
** Fixed RMS connection uptime value
** Fixed RMS display of analog input value when measurement unit is configured
** Fixed OpenVPN auth-pam location for Authentication via file option
** Fixed unexpected ZeroTier service crash issue
** Fixed IPsec RSA key override
** Reduced configuration backup size
** Fixed Package Manager package installation on reboot
** Fixed Package Manager authorization check for offline package upload
** Fixed USB to serial service startup issues
** Fixed WiFi and SIM2-related MODBUS TCP Slave regressions
** Fixed MQTT MODBUS Gateway disconnection after network restart
** Fixed MODBUS Serial Master Alarms page loading
** Removed the "Use new register layout" option from the MODBUS TCP Slave page
** Fixed delay in I/O status check
** Removed enable option from AVL main rule
** Fixed hostname textbox validation in the "Network → LAN → Static Leases" section
** Fixed SNMP Service Settings hints for Location, Contact and Name
** Deleted unused subtype options from the "Services → Events Log → Events Reporting" page
** Fixed sending Events Log Reporting email with attached file
** Fixed Auto-APN hint text positioning
** Fixed dropdown location in the SMS Utilities edit page
** Fixed the "System → Administration → Backup" page layout
===='''[[Media:RUT9XX R 00.06.07.7 WEBUI.bin|RUT9XX_R_00.06.07.7]]''' | 2021.04.12 ====
* New features:
** Added Operator Station Synchronization option to NTP page
* Improvements:
** Updates iptables to version 1.6.2
** Updated openssl to version 1.1.1k
===='''[[Media:RUT9XX R 00.06.07.5 WEBUI.bin|RUT9XX_R_00.06.07.5]]''' | 2021.01.28 ====
* Fixes:
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
** Fixed SSH reachable over SIM IP in early boot
** Added manual network band selection support for EC25-AF modem
===='''[[Media:RUT9XX R 00.06.07.4 WEBUI.bin|RUT9XX_R_00.06.07.4]]''' | 2020.12.21 ====
* Fixes:
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
** Added openvpn patch to fix CVE-2020-11810
** Added strongswan patch to fix CVE-2018-10811
** Updated openssl to version 1.1.1i
** Updated uci to version 2019-09-01
** Updated license information to the System → Licenses → General info page
===='''[[Media:RUT9XX R 00.06.07.3 WEBUI.bin|RUT9XX_R_00.06.07.3]]''' | 2020.11.25 ====
* Fixes:
** Removed "remote-cert-tls server" option from default OpenVPN config
===='''[[Media:RUT9XX R 00.06.07.2 WEBUI.bin|RUT9XX_R_00.06.07.2]]''' | 2020.11.19 ====
* Fixes:
** Randomized the global rate limiter to mitigate "SAD DNS" attack
===='''[[Media:RUT9XX R 00.06.07.1 WEBUI.bin|RUT9XX_R_00.06.07.1]]''' | 2020.11.12 ====
* Fixes:
** Removed downgrade with 'Keep settings' permission with some firmwares
<!--** Fixed OpenVPN client configuration-->
** Fixed mdcollect to receive current data not period
** Fixed single I/O trigger handling
** Fixed multiple I/O triggers handling
===='''[[Media:RUT9XX R 00.06.07 WEBUI.bin|RUT9XX_R_00.06.07]]''' | 2020.09.30 ====
* New features:
** Port Mirroring
** During this release a new package was released - [[{{{name}}}_Package_Downloads#WireGuard_Download|WireGuard]]
* Improvements:
** dnsmasq updated to version 2.80
** uhttpd updated to 2020-02-12 version
** Added logging to Events Log on Modbus write actions
** Added "Persistent connection" and "Timeout" options to Modbus TCP Slave
** Added ASCII, HEX data types to Modbus TCP/Serial Master
** Added more precise error messages to Modbus TCP Test
** Added QoS option for Modbus Data Sender/MQTT protocol
** Added new parameter called "all" to Modbus Data Sender to select all records into one packet
** Increased Modbus Data Sender maximum name length
** Added the option to send SMS to multiple numbers to Modbus Alarm Configuration
** Added ICCID parameter to SNMP MIB module
** Added 4 pin Input/Output parameters to SNMP MIB module
** Added RSCP, EC/IO options to SNMP
** Added support for multiple iroutes per OpenVPN client
** Added validation to "Keep Alive" field in OpenVPN configuration
** Added uploaded package signature verification to Package manager
** Huawei MS2131 USB dongle back-end support
** Added "Ignore incoming calls" option to Call Utilities
** Added possibility to create new profiles from current configuration
** Added additional AT commands for troubleshooting: AT+CGPADDR AT+QGMR AT+QCFG="NWSCANMODEEX" AT+QCFG="BAND" AT+QNWINFO AT+QENG="servingcell" AT+QENG="neighbourcell"
** Added "RMS On/Off" input rule to Input/Output configuration
** Added logging to Events Log when action is 'None'
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
** Removed deprecated crt_rms service
** Changed tooltip messages for Ping/Wget Reboot
** Ping Reboot service rewritten from C to Shell
** Improved IPsec and DMVPN pre-shared key validation
** Fixed IPsec identifier validation
** Added hints in "Multiple Access Points" page and a redirect to main wireless page after saving
** Removed misleading hints from wireless MAC filter page
** Unified I/O pin names throughout the interface
** Improved validation for newly created port-based VLAN
** Changed "Memory expansion" name to "Storage memory expansion"
** Added loading icon when downloading Troubleshoot file
** Added default text when no group is created in User Group selection
** Unified VPN error messages
** Removed "Back to overview" button from GRE Tunnel and SSTP pages
** Added missing "Mode" option in "Mobile configuration" page when PPP is selected
** Removed non-functional "Back To Overview" buttons
** Removed the possibility to create custom reset button configurations
** Added security fixes related to file upload and HTTP headers
** Added existing SMS rule updating to new group name when changing group name
** Unified and expanded username and password validations
* Fixes:
** Fixed starting NTP client after WAN cable is plugged in
** Fixed SIM Switch event sending after switch execution
** Fixed SIM Switch PIN code setting after switch execution
** Fixed sending logs via email
** Fixed active SIM changing issues related to Modbus TCP Slave
** Fixed first-trigger alarm frequency for Modbus Serial Master
** Fixed period when Modbus Data Sender fails to send packet
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
** Fixed WiFi STA/AP bad test logic
** Fixed WiFi STA operation while multiple WiFi APs are present
** Fixed WiFi SSID string handling
** Added WiFi SSID field validations
** Fixed GPS time synchronization in some time zones below the equator for RUT955
** Removed "Aggressive mode" choice from IPSec IKEv2
** Reworked multiple subnet configuration parsing to match documentation recommendations
** Fixed sent email logging on SMS to Email Forwarding
** Included default profile together with other profiles in the list in SMS Utilities
** Made DNS pushed from OpenVPN server live on OpenVPN client
** Fixed compatibility with firmware after update to dnsmasq 2.81
** Changed notification message that is shown when branched firmware is uploaded
** Fixed Analog Input value display over RMS I/O monitoring
** Fixed layout and validations in I/O Rules page
** Unified Output option names in I/O pages
** Fixed SIM2 default MTU value
** Fixed change password error message after factory setting restore
** Fixed non-existing page error on password change after factory setting restore
** Fixed Lua error in Network → Mobile → SIM Management page
** Fixed Lua error in MQTT Publisher page
** Fixed profile apply/update/delete confirmation messages
** Fixed error message display for SIM2 in mobile configuration page
** Removed duplicate MTU field from Setup Wizard's Mobile page
** Fixed incorrect MTU validation in LAN page
** Fixed Hotspot statistics URL error, when URL contains special symbols (such as '%')
** Fixed Hotspot statistics database clearing, when multiple users have the same MAC address
** Fixed phone number field validations
** Fixed Package Manager menu update right after new package upload
** Fixed XSS vulnerability in System → Administration → Root CA page
** Added band selection for 3G modem
** Fixed "Success URL" validation in Hotspot configuration page
** Fixed remote network netmask validation in OpenVPN page
** Fixed element positioning in Setup Wizard, NTP and DHCP pages
===='''[[Media:RUT9XX R 00.06.06.1 WEBUI.bin|RUT9XX_R_00.06.06.1]]''' | 2020.03.12 ====
* Fix:
** Fixed ppp buffer overflow vulnerability (CVE-2020-8597)
** Fixed saving Ping Reboot configuration
===='''[[Media:RUT9XX R 00.06.06 WEBUI.bin|RUT9XX_R_00.06.06]]''' | 2020.03.09 ====
* New features:
** UDP broadcast relay functionality
** Redundancy protection, alarm frequency for Modbus TCP Master
** Telenor MQTT package
** MQTT publisher TLS support
** VRRP multi-section configuration
** Mobile Data Limit info in Clear Data Limit section
** HTTPS control in Access Control window and corresponding SMS rule
** Added source version value to Package Manager
* Improvements:
** Complete rewrite of Modbus TCP Slave: fixed bugs, added new features
** Modbus TCP Master test button now works without needing to save configuration first
** Added ucitrack entry, improved init script for MQTT-Modbus gateway
** Ability to install packages stored in backup file from Package Manager
** Longer profile change loading animation that ends when profile is fully loaded
** Profile name validation and name input hint
** Updated Status → Services page design
** Updated IPsec Pre-Shared key tooltip
** Improved operator control with auto APN functionality
** Refactored VRRP overview and status pages
** Added 4 pin I/O SNMP trap rules
* Fixes:
** Fixed GPSD session handling functionality
** Rewritten communication logic for RMS connections with non-blocking socket
** Fixed signal strength logs when Events Reporting is enabled
** Fixed Events Reporting 'Send Test Email' button to not send empty emails
** Fixed 'Change profile' SMS Rule
** Fixed 'Monitoring status' SMS rule
** Fixed 'Send status' message to other multiple phones
** Unified password validation and password hints
** Removed "Site Survey" page
** Changed 'free' memory indication to 'used' memory in the Status → System window
** Fixed mobile service 3G + 4G configuration
** Fixed OpenVPN server status values in the Overview page
** Fixed OpenVPN config from file
** Fix mobile protocol value in the WAN window
** Fixed restore to default LAN after disabling VLAN
** Fixed RAM usage display
** Removed 4 pin power block picture from devices which do not have it
===='''[[Media:RUT9XX R 00.06.05.3 WEBUI.bin|RUT9XX_R_00.06.05.3]]''' | 2019.11.26 ====
* Fixes:
** Fixed RMS not displaying correct data from device when mobile is enabled and there is more than one day of data collected
===='''[[Media:RUT9XX R 00.06.05.1 WEBUI.bin|RUT9XX_R_00.06.05.1]]''' | 2019.11.15 ====
* New features:
** Modbus TCP custom register block
** tls-crypt Additional HMAC authentication option
** Ability to upload custom OpenVPN configuration file
** Ability to upload OpenVPN TLS-clients configuration
** OpenVPN Password authentication
** Azure IoThub MQTT subscriber support
** Call utilities add support for answer/hangup with timer
** SMS Utilities Auto-APN toggling rule
** Full Unicode SMS support
** Multiple Access Points
** Network frequency band select support for global version
* Improvements:
** Added tables' position priority in Overview settings
** Added hint in the Hotspot statistics page
** OpenVPN PKCS12 support added
** Added supported AES ciphers to OpenVPN
** Updated APN database
** Add advertisement interval option to VRRP
** Faster private key generation on first boot
* Fixes:
** Restored Passthrough and Bridge mode DHCP leasetime configuration
** Network frequency band selection fix
** Network frequency Bands SIM1/SIM2 tab disappearing fix
** Automatic APN save fix
** Mobile Service mode validation fix
** Mobile username/password' read & write fix
** Mobile widget sent/received bytes for PPP mode fix
** Mobile Data Limit firewall rule init fix
** Operator control fixes
** SMS Utilities message deletion fix
** SMS Utilities vpnstatus command fix
** SMS Utilities setting of APN with Auto APN enabled fix
** OpenVPN enable/disable fix
** OpenVPN Additional HMAC authentication option selection fix
** OpenVPN TLS/Password & Password authentication fixes
** VPN incorrect error message fix
** Unified VPN name validation methods
** Events Reporting service start fix
** Events reporting event subtype changes
** Network type logging on modem service restart fix
** Added button to delete all access points, fixed long configuration apply times
** Increased Hotspot Landing page file upload limits
** SNMP option in Events Reporting without package installed fix
** SNMP MIB syntax fixes
** Samba CVE-2019-3824 and CVE-2019-3880 fixes
** QoS speed fields validation fix
** Latest HTTP/HTTPS connections not showing in Access Status fix
** Added error messages in Package Manager
** Package Manager: added service restart after keep settings and backup installation
** Package Manager: decreased package script reload after keep settings firmware and backup upload
** Package Manager: services start on boot if enabled fix
** Changed packages names in Package Manager
** Merged all Package Manager tabs into one
** Premature session end when time is updated fix
** Expanded Input/Output status view and updated information
** Incorrect VLAN ID range fix
** Fixed VRRP default config to follow RFC 2338
** Hostname and router name after backup upload fix
** Unified password field validations
** USB modem widget crashing WebUI fix
** CVE-2019-12272: possible shell injection in WebUI fixed
** WebUI doesn't load if modem is unresponsive fix
** Input/Output button styles changed to reflect global design
** Fixed design issue in SIM idle protection
** Restore Point applying after backup fix
===='''[[Media:RUT9XX R 00.06.04.5 WEBUI.bin|RUT9XX_R_00.06.04.5]]''' | 2019.08.26 ====
* Fixes:
** RutFOTA Memory managament fix and speed improvements
** Firmware upgrade from server fix
** Mobile page fix for 3G modules
===='''[[Media:RUT9XX R 00.06.04.3 WEBUI.bin|RUT9XX_R_00.06.04.3]]''' | 2019.08.14 ====
* Fix:
** Removed APB type 'mms' from database
** Network Frequency Bands SIM1/SIM2 tab disappearing fix
** Service mode validation fix
** Automatic APN save fix
** Mobile Username/Password read & write fix
** LTE B20 band showing up twice fix
** SIM2 tab APN write fix
** SIM2 tab Authentication method does not show up fix
** Enable automatic APN selection by default
===='''[[Media:RUT9XX R 00.06.04.1 WEBUI.bin|RUT9XX_R_00.06.04.1]]''' | 2019.07.31 ====
* Fixes:
** Mobile Bridge and Passthrough mode keep settings fix
===='''[[Media:RUT9XX R 00.06.04 WEBUI.bin|RUT9XX_R_00.06.04]]''' | 2019.07.24 ====
* New features:
** [[RUT955 Packages|Package manager]] functionality added
** [[RUT955_Modbus#Modbus_Serial_Master|Modbus Serial Master]] functionality added
** [[RUT955_Mobile#SMS_Limit|SMS Limit]] functionality added
** [[RUT955_VPN#ZeroTier|ZeroTier One VPN]] support implemented
** [[RUT955_Administration#Azure_IoThub|Azure IoT Hub]] support implemented
** Added buildable Cumulocity library and example application to the SDK
** Add an insecure bridge option for MQTT
** Added Jio APN
* Improvements
** All VPN services styles were unified
** Added Slovenia to operator country list
* Fixes:
** SMS Gateway: Removed new line add after configuration save
** Fixed Montenegro operators
** SMS Utilities Mobile/WiFi on & off commands fixed
** SMS Utilities UCI API rule fixes
** Modbus Mobile/WiFi on & off commands fixed
** DDNS service restart fix
** Data limit validation fixes
** Hotspot Logging disable fix
** Some grammar mistake fixes
** Disappearing 'Load Balancing/WAN Failover' option fix
** Fixed spammy WiFi logging
** On action 'reboot' allow a minimum of 5 minutes interval fix for Wget reboot
** Load Balancing re-ordering and deletion fix, added validation for policy name
** Operator control, determine APN from SIM IMSI number
** WAN state and IP print fixes
** DDNS name existence check fix
** Ping Reboot packet size 0 fix
** Added validation to prevent very large-files from being uploaded and taking up all the space in RAM
** Hotspot external landing page de-selection fix
** Input/Output Periodic Control fixes
** Port forwarding with prefix /31 fix
===='''[[Media:RUT9XX R 00.06.03.2 WEBUI.bin|RUT9XX_R_00.06.03.2]]''' | 2019.06.10 ====
* New features:
** Added port logging
** Added upload backup from lower firmware version support
** Added 4-pin I/O support for new RUT9 models
** Introduced auto APN selection feature
** Added SNMP GET requests for LAN1/LAN2/LAN3/WAN (or LAN4) status
** Hotspot TOS HTML support added
** GPL Teltonika 'twStreamApp' API for ThingWorx added
** Added UDP support for serial connections
* Improvements:
** Updated uci to version 2018-08-11
** Updated ubus to version 2018-10-06
** Updated ubox to version 2019-04-07
** Updated libubox to version 2019-02-27
** Updated openssl to version 1.0.2r
** Updated busybox to version 1.30.1
** Updated dropbear to version 2019.78
** Added reply after mobileon and mobileoff SMS Utilities commands
** Added access control disable confirmation
** Added data limit information in Hotspot landing page
** Modbus: added busy status return code while actions are executed
** GPS: added support for Input/Output
** Expanded VRRP configuration to support virtual MAC
** Added -U parameter to gsmctl for ussd commands
* Fixes:
** Mobile page fix
** Increased RMS HTTP Proxy resource limit
** Fixed LED indication setting
** Fixed input validation issues
** Mobile traffic graph fixes
** SIM Idle Protection test fix
** Services: Remove GRE and Hotspot from Status → Services window
** GPS speed calculation fix
** Mobile: set 1st context to IPv4
** RS232/RS485 service reload fixes
** Bootloader URL update
** Email to SMS validation and larger SMS send fix
** Fixed LED signal issue when reporting invalid signal
** Main WAN routes overwritten when USB Modem is used fix
** Added explanation text to operator control
** Remove WEP encryption method
** Cloud4wi profile fixes
** IPSec 'Allow WebUI access' with 'Redirect to HTTPS' fix
** SMS Utilities User group validation fix
** GPS Map was made compatible with Edge browser
** GPS Tab order fix
** Wireless regulatory domain and channel change fix
** GRE and GPS start/stop fix
** Minor NHRP bug fixes
** XHR authentication fixes
** DMVPN lua bug fix
** SMS Forwarding clarified WebUI options
** Hotspot local users data limit fix
** Setup Wizard Mobile 'Dialing number' disappears after save fix
** Setup Wizard: Validation fix
** Wireless SSID validation fix
** Bidirect mode connection problems fix
** GPS & SNMP Trap link fixes
** Validation for GRE Tunnel interface name added
** Force band validation fix
** VRRP status window fix
** PPTP server configuration when upgrading from old firmwares with keep-settings enabled fix
** Added GPS geofencing coordinate validation
** Added error return codes for fault conditions, changed writing register numbers for Modbus
** Fixed GPS time synchronization
** Output - Periodic Control form not visible on Chromium fix
** SIM Switch on mobile data limit fix
** Load Balancing validation for port numbers fixed, modified warning message
** Overview Bytes sent/received count fix
** Fixed sending data to AVL server
** OpenVPN configuration name fix
** DMVPN configuration count validation fix
** IPSec LAN access fix
** After editing WAN interface, redirect back to WAN page fix
** Wireless STA scanning when all AP are down fix
** SMS Gateway auto reply page fixes
** NTP time zone options fix
** Wake on LAN validation to prevent shell command execution via 'name' field
** GPS Input/Output SMS send fix
** RMS HTTPS proxy fix
** Fixed RMS WAN State and WAN IP
** MQTT bridge with SSL/TLS connection fix
** Use DNS servers advertised by peer not saving fix
** Wget reboot logging fixes
** Periodic Control do not show timeout if it is disabled fix
** QoS speed limitation fix
** Added additional band support for some models
===='''[[Media:RUT9XX R 00.06.02.2 WEBUI.bin|RUT9XX_R_00.06.02.2]]''' | 2019.04.23 ====
* Fixes:
** GPS related fixes
** SDK compilation fixes
===='''[[Media:RUT9XX R 00.06.02 WEBUI.bin|RUT9XX_R_00.06.02]]''' | 2019.04.05 ====
* New features:
** Added [[RUT955_Modbus#Modbus_TCP_Master|Modbus master]] feature
** Added [[RUT955_Modbus#Modbus_Data_to_Server|Modbus data sender]] feature
** Added NMEA forwarding, Geofencing, NTP calculation, AVL forwarding, HTTPS forwarding, other satellite support to GPS functionality
** Added DMVPN service
** Impelemented NHRP protocol
* Improvements:
** Updated xl2tpd to version 1.3.13
** Added "use as default gateway" option to SSTP
** Added XT25F128B flash support
** Shared-keys option added to Strongswan
** Auto option selection added to Strongswan
** Added GRE Tunnel source selection from interfaces and ability to write in the local IP
** Added ability to create VLAN 0
* Fixes:
** Fixed Event Log reporting over FTP
** Multiple OpenVPN fixes
** IPSec start order fix
** IPSec configuration loss fix
** IPSec sha512 and sha384 support fix
** IPSec IKEv2 restart loop fix
** L2TP stability issue fixes
** L2TP service restart after config change fix
** USB to serial multiple minor bug fix
** Samba multiple bug fix
** Wireless Station availability when two or more Access Points are created fix
** Input/Output analog calculator fix
** Wget Reboot disable fix
** SMS Utilities, 'more' command SMS text customisation fix
** SMS Utilities GPS ON/OFF fix
** SMS Utilities 'uci show' command fix
** Multiple SMS Utilities remote configuration fixes
** Use WAN as LAN fix
** Wake on LAN use WAN as LAN fix
** Authorization on LTE network fix
** Restore Point file download fix
** LED issue when rebooting router with reset button fix
** LED issue when there is no connection fix
** SSTP interface up after being disabled fix
** MQTT Publisher WAN IP retrieval fix
** Static leases, MAC address list fix
** Static Routes, PPTP interface creation fix
** SMS Utilities User groups synonymous numbers '00XXX' & '+XXX' fix
** Hotspot Restricted Internet Access fix
** Hotspot session in use by user deletion fix+
** Hotspot Walled Garden fix
** Hotspot Statistics window contains non-hostpots fix
** Hotspot authentication mode validation fix
** VLAN, LAN Network configuration backup fix
** VRRP fix
** Call utilities, mobile data ON/OFF without config write fix
** MQTT multiple bug fixes
** Output Scheduler fix
** Profiles: output scheduler update fix
** Maximum length SMS message send fix
** DDNS sleep after check interval and force interval fix
===='''[[Media:RUT9XX R 00.06.00.4 WEBUI.bin|RUT9XX_R_00.06.00.4]]''' | 2019.03.12 ====
* Fixes:
** Samba fix
===='''[[Media:RUT9XX R 00.06.00.3 WEBUI.bin|RUT9XX_R_00.06.00.3]]''' | 2019.03.08 ====
* Fixes:
** Special case 3G  to 4G fix
===='''[[Media:RUT9XX R 00.06.00.2 WEBUI.bin|RUT9XX_R_00.06.00.2]]''' | 2019.03.07 ====
* New features:
** Added Wake on LAN feature
** Added SMS Utilities Wake on LAN rule
** Added Global module connection support
* Improvements:
** Changed RMS communication protocol to MQTT from OpenVPN
** Added informational text to Proxy based content blocker page
** Improved wording in Load Restore Point section
** Updated curl to version 7.64.0
** Updated OpenSSL to version 1.0.2q
* Fixes:
** UPNP not starting, reappearing leases fixes
** Removed NOTRACK from firewall rules
** RS232/RS485: allow DNS NTRIP address
** DDNS Process kill fix
** Multiwan fix
** Added rule validation to Load Balancing
** rpcd broken pipe fix
** Daily mobile traffic deletion fix
** Fixed mobile traffic logging graph issues
** CLI Connect button fix
** Data only SIM support fix
** Limit guard Widget fix
** Sodog related fixes
** Hotspot Advertisement address error message fix
** SSTP fix
** SIM switch related fixes
===='''[[Media:RUT9XX R 00.05.04 WEBUI.bin|RUT9XX_R_00.05.04]]''' | 2019.01.14 ====
* Improvements:
** Added IP allocation for users in L2TP server
** SMS utilities add 'more' functionality
** Added modem band display in Mobile page
* Fixes:
** Remote access information fix
** Fixed static route application for PPTP, L2TP servers
** Fixed PPTP passwords file override
** L2TP IP-range change fix
** Fixed firewall rules that apply for hotspot firewall zone
** SMS Utilities web access control rule fix
** Wireless status and mobile uptime fixes
** Fixed active connections on Fallback WAN
** Fixed routing table display
** Setup Wizard LAN DHCP fields not hidden when DHCP is unchecked fix
** Fixed GRE Tunnel connection
** Fixed static routes table view with VPN interfaces
** Enabled NTP to run server and client simultaneously
===='''[[Media:RUT9XX R 00.05.03.4 WEBUI.bin|RUT9XX_R_00.05.03.4]]''' | 2018.12.20 ====
* Fixes:
** SSH security fix
** Mobile page fix
===='''[[Media:RUT9XX R 00.05.03.3 WEBUI.bin|RUT9XX_R_00.05.03.3]]''' | 2018.12.11 ====
* New features:
** Added SSTP VPN protocol
** Added force network bands support for RUT9xx H*****, U***** and T***** product codes
** Added STunnel feature to VPN services
* Improvements:
** Added every WAN interface selection to QoS
** Updated VRRP to latest version
** Added MAC address range support for WiFi MAC filter
* Fixes:
** Enabled "Enter" key on login form
** Mobile WAN IP display in overview
** SMS status WAN IP with multiwan fix
** Fixed WAN failover metrics and priorities
** Some additional WAN failover fixes
** Update Teltonika contact address in Licenses page
** Fixed lua dispatcher error after reboot
** Overview OpenVPN widget fix
** Associated wireless stations display fix
** PPTP default gateway set and delete fix
** GRE Tunnel delete after button press fix
** L2TP network restart after L2TP connection loss fix
** Wireless connection loop fix
** Modem related updates
** Disabled DHCP request in bridge mode
** Keep data limit count after firmware upgrade with keep settings fix
** WiFi STA+AP fix
** GPS related fix
** SNMP signal value type and memory leak fixes
** Modbus serial read gateway timeout fix
** Modbus set APN and memory leak fix
** Serial over IP ASCII full character support fix
** SMS Utilities check for incoming SMS fix
** Events Reporting firmware upgrade fix
** Mobile WAN IP fix
** L2TP network restart after client delete with default gateway set fix
** Hotspot user validation fix
** Added OpenVPN service restart when TLS Password is changed
** Redirect to different LAN IP after configuration backup, restore and firmware upgrade fix
** NTP time synchronisation after WebUI configuration fix
** Setup wizard wireless channel select fix
** Data collection counter fixes
** Fixed inactive SNMP Input/Output traps
** SNMP Hotspot and serial values fix
** Log to flash limited to 1MB
===='''[[Media:RUT9XX R 00.05.02.6 WEBUI.bin|RUT9XX_R_00.05.02.6]]''' | 2018.11.05 ====
* Fixes:
** Overview mobile WAN IP display fix
===='''[[Media:RUT9XX R 00.05.02.5 WEBUI.bin|RUT9XX_R_00.05.02.5]]''' | 2018.10.26 ====
* Fixes:
** Removed ability to use username and password without APN
** Updated to latest modem version
** Changed dhcp usage on mobile interface
===='''[[Media:RUT9XX R 00.05.02.3 WEBUI.bin|RUT9XX_R_00.05.02.3]]''' | 2018.10.22 ====
* New features:
** Added event log entry when clearing mobile data limit
* Fixes:
** Data limit calculation fixes
** SIM switch: data limit check fixes
===='''[[Media:RUT9XX R 00.05.02.2 WEBUI.bin|RUT9XX_R_00.05.02.2]]''' | 2018.10.12 ====
* Fixes:
** Troubleshoot: sensitive information (usernames and passwords) removal from router configuration
** DDNS IP source changing fix
** Overview VRRP widget status fix
** OpenVPN name validation with special symbols check fix
** SMS Forwarding number check with 00 code with listed numbers fix
** Overview SMS counter widget fixes
** Firewall and UPnP page display fixes
** Periodic SIM Switch check fix
** Operator selection fix
** SNMP MIB values and file format fix
** OpenVPN configuration section name compatibility fix
** Call Utilities: 4G-only mode warning fix
** Mobile traffic data usage delete fix
** Disabled passthrough and bridge selection when multiwan is enabled
** Log to flash limited to 1MB
===='''[[Media:RUT9XX R 00.05.02 WEBUI.bin|RUT9XX_R_00.05.02]]''' | 2018.10.01 ====
* New features:
** Added Relayd function
** Added ability to create multiple geofencing zones
** Added support for NTFS disks
** Enabled diffie-hellman-group14-sha1 key exchange algorithm
* Improvements
** Changed default VLAN to vid 0, added ability to tag WAN port
** Added ebgp-multihop option to BGP
** Added Modbus parameters for GPS information
** Added custom IPsec option field
** Disabled Hotspot users ability to reach LAN devices and WebUI
** WAN Failover: add option to execute command
** Made Wired (Main) + Mobile (Failover) as default configuration
** Enabled connection to RMS by default
** Some RMS page updates
** Added default LAN IPv6 address
* Fix:
** OpenVPN server authentication change fix
** Events reporting rule enable fix
** PPTP use as default gateway option fix
** Language translation fixes
** RS232/RS485 synchronization bug fix when using NTRIP with GPS coordinates
** Operator list fixes
** USB to Serial firewall rules fix
** SMS Utilities rule not enabled exit fix
** MQTT remote address datatype fix
** GSMD: remove old info from help
** Some Hotspot functionality fixes
** Input/Output User groups fix
** DHCP server lease time fix
** Dynamic routes fixes
** Static Routes fix
** Mobile Passthrough mode fix
** Events Log Report configuration validation fixes
** WiFi updates and security fixes
** Overview WAN wiki link fix
** Overview Hotspot widget fix
** SIM Idle Protection Test WAN IP fix
** Samba network share discovery fix
** SIM card switch on data limit fix
** Mobile data bytes reset on 4GB fix
** Hotspot start after reboot fix
===='''[[Media:RUT9XX R 00.05.01.8 WEBUI.bin|RUT9XX_R_00.05.01.8]]''' | 2018.09.10 ====
* Fixes:
** Config restore fix
** RS-232 serial over IP fix
** CLI fix for RMS
===='''[[Media:RUT9XX_R_00.05.01.5_WEBUI.bin|RUT9XX_R_00.05.01.5]]''' | 2018.08.02 ====
* New features:
** Added PDU forwarding function
** Added new logic for operator whitelist/blacklist
** Updated mobile operator database
** Added Firmware update information
** Added information text in Emailt to SMS page
** Added wiki link to an IP type next to WAN IP
** Added Graphs/Signal strength: UMTS network type signal
** Added Operators list: periodic network scan if fail to connect to operator on first time
** Added SLIP protocol with slattach software into the router
** Added automatic IP refresh in WAN page
** Added VLAN LAN IP start and end automatic update
* Fixes:
** DDNS Force update
** Configuration Wizard: LAN page redirect fix
** Overview: WAN IP fix
** Fixed Troubleshoot: TCP dump
** Access Control: Add Redirect to HTTPS information
** Service Status: QoS status
** Hotspot: Parameter validation
** Overview: OpenVPN widget
** PPTP: Fix interface metric on multiwan with PPTP
** Nerwork -> WAN Mode translate
** DHCP range display in VLAN page
** Change 'Backup WAN' to 'WAN Failover'
** Linux: CVE-2017-18017
** OpenVPN: remote IP address validation to not include route LAN subnet
** GRE: updated keep alive to work with cisco routers
** WebUI: NTP Time servers page fix
** Call Utilities: reboot action partial message
** WebUI: sim_switch: add ICMP host field validation
** Hotspot: data limit fix
** Security: CLI: updated shellinabox to 2.20, changed CLI WebUI page
** WebUI: DDNS: Force IP renew
** WebUI: SMS counter widget
** WebUI: Hotspot: security
** PPP: add default route
** WebUI: Hotspot: Protocol and HTTPS redirect option
** WebUI: Mobile Traffic Usage Logging
** WebUI: Administration added hostname length limit (32 symbols)
** OpenVPN: Add RMS service fix
** libgsm: Prevent crash on failed libusb init
** uHTTPd: Disable stderr option
** SMS Utilities: Prevent crash when reading config
** Mobile: Service mode selection fix
** WebUI: Prevent redirection to HTTPS by default
** WebUI: Add hint when accessing CLI without certificate
** SMS Utilities: Prevent stopping application on empty reports config
** CLI: Use correct service port
===='''[[Media:RUT9XX R 00.05.00.5 WEBUI.bin|RUT9XX_R_00.05.00.5]]''' | 2018.05.30 ====
* New features:
** Added forced password change
** New firmware versioning system
* Fixes:
** Fixed SMS PDU decoding sender number
** Fixed RMS connection status display in Overview window
** SIM Switching fix
** Updated Hotspot login page parameters (MAC parameter)
===='''[[Media:RUT9XX R 00.04.233 WEBUI.bin|RUT9XX_R_00.04.233]]''' | 2018.04.26 ====
* Fixes:
** Minor Hotspot fixes (CVE-2018-17532)
** Minor SIM Switch fixes
** Minor opkg fix and package update
===='''[[Media:RUT9XX R 00.04.199 WEBUI.bin|RUT9XX_R_00.04.199]]''' | 2018.04.18 ====
* Improvements:
** Upgraded SIM Switch speed
** Upgraded OpenVPN with the possibility to upload CRL files
** Added IP aliases description and advanced features
** Added additional DPD option to IPsec configuration
* Fixes:
** Disabled saving password with the Enter key on WebUI
** Firewall User Script fix
** OpenVPN TLS clients fix
** Some IPsec functionality fixes
** Fixed all VPN shutdown on delete
** Mobile Passthrough mode bad netmask fix
** Call Utilities write to config fix
** Minor Input/Output fixes
** Fixed RMS connection retry time
** Signal Strength display fix for HSDPA+HSUPA network type
===='''[[Media:RUT9XX R 00.04.172 WEBUI.bin|RUT9XX_R_00.04.172]]''' | 2018.04.10 ====
* New features:
** Added RMS connection page to Setup Wizard
** Added link to Teltonika wiki in the router's WebUI
** Updated Overview conifugration with Remote Monitoring widget and wiki icon
* Improvements:
** Upgraded to faster SIM switching logic
* Fixes:
** Fixed OpenVPN TLS/Password client route pushing
** Fixed GPS bug that caused 100 % CPU usage when using I/O
** Fixed password saving with the "Enter" key
** Removed RS485 echo
** Fixed Event Log bug that caused Call events not showing up in the log
** Fixed SMS-Utilities openvpn status rule
===='''[[Media:RUT9XX R 00.04.161 WEBUI.bin|RUT9XX_R_00.04.161]]''' | 2018.03.26 ====
* Improvements:
** Improved SSH security
* Fixes:
** Fixed deleting SMS messages function in SMS Utilities
** QoS bug fix that caused it to work even if it was disabled
** LTE only mobile data connection fix
** Minor Kernel fix
** Minor functionality fixes for when there is no SIM card inserted
===='''[[Media:RUT9XX R 00.04.153 WEBUI.bin|RUT9XX_R_00.04.153]]''' | 2018.03.16 ====
* Fixes:
** IPsec fix for use with multiple WANs
** Fixed a bug that caused different WAN IPs to be displayed in the Overview and WAN windows
** SMS Forwarding to HTTP fix
** SMS Utilities functionality fixes
===='''[[Media:RUT9XX R 00.04.147 WEBUI.bin|RUT9XX_R_00.04.147]]''' | 2018.03.08 ====
* New features:
** Added L2TP tunnel watchdog.
* Fixes:
** PPP connection type fix
** SMS Utilites vpnon/vpnoff rule fixes
** Added GRE-Tunnel fix that prevents problems when switching profiles
** OpenVPN status display fix
** SMS Forwarding to Email fix
===='''[[Media:RUT9XX R 00.04.125 WEBUI.bin|RUT9XX_R_00.04.125]]''' | 2018.02.27 ====
* Improvements:
** Added ICCID print, for dynamic parameters
** Added reload function for GRE Tunnel if SIM Switch ocured
** Added SIM card option for GRE tunnel
* Fixes:
** SMS Utilities forward to HTTP fix
** Network Shares USB drive safe removal fix
** Some changes to config hierarchy
** Wget Reboot fix
** Input/Output SIM Switch rule fix
===='''[[Media:RUT9XX R 00.04.112 WEBUI.bin|RUT9XX_R_00.04.112]]''' | 2018.02.20 ====
* Fixes:
** Small fix for HTTPS access when DMZ is enabled
** Updates to Firmware Upgrade verification
** L2TP unused UCI option removed
** Minor fixes to VPN use with Multiwan
** Format style fixes for VPN pages
===='''[[Media:RUT9XX R 00.04.103 WEBUI.bin|RUT9XX_R_00.04.103]]''' | 2018.02.14 ====
* Fixes:
** SMS Counter database fix
** IP renewal by APN fix
** Firmware verification bug fix
** Call Utilities rule enable fix
** Wget Reboot modem restart fix
===='''[[Media:RUT9XX R 00.04.94 WEBUI.bin|RUT9XX_R_00.04.94]]''' | 2018.02.12 ====
* New features:
** Added Printer Server functionality that allows control of a printer that connects to the router via USB cable
* Improvements:
** Improved RS232/RS485 Over IP function so that the server can communicate with multiple clients at the same time
** Added automatic Firewall rules that allow remote access to the router's WebUI when DMZ is enabled
* Fixes:
** Some minor Samba fixes in the WebUI
** OpenVPN username and password validation fix
** Fixed VPN service restart when in use with Multiwan
** Site Blocking file parsing fix
** Some updates to the router's config file system
** Firmware check fix
===='''[[Media:RUT9XX R 00.04.75 WEBUI.bin|RUT9XX_R_00.04.75]]''' | 2018.01.30 ====
* Fixes:
** APN bug fix
** Added modem Firmware update package
** Some minor OpenVPN username and password requirement fixes
===='''[[Media:RUT9XX R 00.04.64 WEBUI.bin|RUT9XX_R_00.04.64]]''' | 2018.01.23 ====
* Improvements:
** SMS Utilities rule configuration pages supplemented with information about SMS text format
** Disable NAT function moved from VPN to Firewall page
* Fixes:
** Minor fix to Hotspot functionality
** Minor fixes to Firewall confg
** Fixed Mobile Data Limit byte count storage
** RS232/RS485 Modbus functionality fixes
===='''[[Media:RUT9XX R 00.04.57 WEBUI.bin|RUT9XX_R_00.04.57]]''' | 2018.01.17 ====
* Improvements:
** Added special character support for OpenVPN tunnel names
** Added binero.se to DDNS service list
* Fixes:
** Fixed Write to config function for SMS Utilities mobileoff rule
===='''[[Media:RUT9XX R 00.04.48 WEBUI.bin|RUT9XX_R_00.04.48]]''' | 2018.01.12 ====
* New features:
** Added RS232 over IP serial data as email feature
* Fixes:
** Fixed MQTT bug where you couldn't remove TLS/SSL option once selected
** Fixed GPS hostname data type check
** Fixed DHCP lease time validation in LAN and Setup Wizard
** Updated IPsec stop function
** Site blocking White List fix
** Modem GPS related bug fix
===='''[[Media:RUT9XX R 00.04.38 WEBUI.bin|RUT9XX_R_00.04.38]]''' | 2018.01.08 ====
* Fixes:
** Changed Mobile Data Limit representation in the Overview window
** Fixed GPS Fix status display bug
===='''[[Media:RUT9XX R 00.04.32 WEBUI.bin|RUT9XX_R_00.04.32]]''' | 2018.01.04 ====
* New features:
** Added Wget Reboot function
** Added RS232/485 initiation string option for Modem mode
* Fixes:
** Samba user creation fix. Added a user limit of 2999 users
** Some minor grammatical and data type fixes in the router's WebUI
** Added a function that restarts services when using the SMS Utilities uci rule
** Input/Output Scheduler backup fix
** Some fixes to the style of the Administration page
** Network Operators White List fix
** Mobile connection stability fix
===='''[[Media:RUT9XX R 00.04.12 WEBUI.bin|RUT9XX_R_00.04.12]]''' | 2017.12.22 ====
* New features:
** Added IPsec support for multiple clients
* Improvements:
** Updated troubleshoot package with IPsec status
** Added WebUI notice for SIM Switch on Data limit
** IPsec instances limit set to 5
** Dynamic list limit set to 100
* Fixes:
** Wi-Fi security fix
** Firmware update fix due to 04 FW version
** SIM Switch back to primary SIM after Data or SMS limit fix
** Fixed bug that didn't allow hostnames to be used as Ping Reboot
===='''[[Media:RUT9XX R 00.03.985 WEBUI.bin|RUT9XX_R_00.03.985]]''' | 2017.12.14 ====
* New features:
** Added left and right firewall options to IPsec configuration
* Fixes:
** Fixed some minor grammatical errors
** SIM PIN bug fix
** Some minor fixes to SMS and Call Utilities
** Fixed loading gif spinner bug that caused it to spin endlessly
** SMS Gateway form validation fixes
** Post/Get configuration fix
** Fixed empty value insertion for IPsec local LAN
** Fixed iptables rule that didn't allow Limit Guard to account traffic
** Some minor PPTP Server and Client fixes
** Fixed mobile disconnection bug
===='''[[Media:RUT9XX R 00.03.965 WEBUI.bin|RUT9XX_R_00.03.965]]''' | 2017.12.07 ====
* New Features:
** Added NAT Helper control page to the Firewall section
* Improvements:
** Added IPsec Multiwan support for transport mode
* Fixes:
** Changed data type for storing Data limit network stats
** Added some default Firewall rules needed for SIM Switch
** SIM Switch on Data limit now uses limit_guard for counting data
** Some stylistic changes to router's WebUI
** Fixed Call Utilities calling from User Group bug
** Fixed OpenVPN Static key bug
===='''[[Media:RUT9XX R 00.03.946 WEBUI.bin|RUT9XX_R_00.03.946]]''' | 2017.12.01 ====
* New features:
** Added OpenVPN Client key decryption password field
* Improvements:
** Updated Dynamic DNS service
* Fixes:
** OpenVPN Server configuration save fix
** Multiple PPTP clients in LAN fix
** Fixed Realtime Traffic graphs with PPP type connection
** Fixed PPP connection type data usage collecting
===='''[[Media:RUT9XX R 00.03.923 WEBUI.bin|RUT9XX_R_00.03.923]]''' | 2017.11.24 ====
* Fixes:
** Wi-Fi Station with WPA-Enterprise fix
** Fixed Wi-Fi Access Point SSID mismatch when adding new Access Points
** Fixed no data connection bug when Operator is added to the White List
** Added fix that makes sure password fields glow red after entering incorrect data
** Fixed SMS Utilities bug that caused Router Name not being displayed in status messages
** SMS Counter fix
** Some security fixes
** Some modem functionality fixes that prevent not switching to LTE
** SIM Switch logic fixes
===='''[[Media:RUT9XX R 00.03.906 WEBUI.bin|RUT9XX_R_00.03.906]]''' | 2017.11.20 ====
* New features:
** Added WPA-Enterprise support
** Added Hotspot Landing page URL parameters config
** Added Host list file feature that allows uploading a list of hosts to Site Blocking and Proxy Based Content Blocker
** Added RS232/RS485 Serial type: Modem option
** Added SNMPv3 support
** Added Huawei USB modem support added
* Fixes:
** Added reboot patch for Event Log messages
** Use IPv4 Only fix that caused not using default context ID
** Fixed reboot with button issue
** Added Multiwan checking for L2TP fix
** Added default static route selection for L2TP
** Some kernel logging fixes
** Updated iptables 1.4.21 release to 2
** Updated busybox package to 1.24.2
** Fixed OpenVPN NAT configuration
** Web Filter model fix
** SMS Counter fix
** Fixed Bridge mode bug that prevented devices from getting an IP address when APN was entered
** Fixed connection to hidden Wi-Fi Access Point
===='''[[Media:RUT9XX R 00.03.850 WEBUI.bin|RUT9XX_R_00.03.850]]''' | 2017.11.03 ====
* New features:
** Added NETMAP functionality
* Fixes:
** Some Limit Guard fixes
** Some GPS functionality fixes
**Mobile sent/received data added to TR-069
**Fixed start up of SD card
===='''[[Media:RUT9XX R 00.03.832 WEBUI.bin|RUT9XX_R_00.03.832]]''' | 2017.10.25 ====
* Improvements:
** Added network and cell information
* Fixes:
** RS232/RS485 fix for flow controll settings and console mode
** Internet Explorer WebUI bug fix
** Fixed new FOTA version notice
** Added network and cell information
<!--
===Bootloader ChangeLog===
----
The "Bootloader Change Log" section is removed for the time being due to some known issues regarding old device and new bootloader compatibility. This section will be updated when a solution is present.
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT9xx Bootloader Upgrade|here]].'''
===='''[[Media:Uboot for tlt rut9xx 3.0.1.zip|RUT9XX Bootloader version 3.2.5]]''' | 2020.02.13====
*Improvements:
**Updated links to teltonika-networks.com
===='''[[RUT9xx old Bootloaders|RUT9XX Bootloader version 3.2.4]]''' | 2019.12.11====
*New features:
**Added all LED indication on device power on.
===='''[[RUT9xx old Bootloaders|RUT9XX Bootloader version 3.0.1]]''' | 2017.02.14====
* Improvements:
** Increased DDR voltage
===='''[[RUT9xx old Bootloaders|RUT9XX Bootloader version 3.0.0]]''' | 2016.06.30====
* Improvements:
** Upgraded U-boot
===='''[[RUT9xx old Bootloaders|RUT9XX Bootloader version 2.0.0]]''' | 2016.01.22====
* Improvements:
** Removed SafeMode feature
===='''[[RUT9xx old Bootloaders|RUT9XX Bootloader version 1.0.0]]''' | 2014.11.14====
* New features:
** Released U-boot
-->

Latest revision as of 13:26, 20 November 2024

RUT9_R_00.07.00.2 | 2021.10.19

  • Fixes
    • Fixed NMEA sentence validation for Meig modems

RUT9_R_00.07.00 | 2021.07.16

  • New features
    • New, RUTX-like WebUI style
    • New WebUI based on Vue.js 2.6.12
    • RutOS updated to OpenWrt 19.07.7 base
    • DNP3 Master and DNP3 Oustation
    • 'Restore to user's defaults' SMS Utilities rule
    • DHCP Relay AT command
  • Improvements
    • Updated firewall to release 3
    • Updated kernel to version 4.14.221
    • Updated uhttpd to version 2020-10-01
    • Updated xtables-addons to release 9
    • Updated mwan to version 2.8.14
    • Updated pcre to version 8.44
    • Updated curl to version 7.74
    • Updated sqlite to version 3.33
    • Updated ncurses to version 6.2
    • Updated OpenSSL to version 1.1.1k
    • Added full MODBUS register address expansion specifier for Data to Server
    • Added full MODBUS register address legend
    • Added Client ID option for the MQTT protocol in Data to Server
    • Improved Data to Server sleeping accuracy
    • Improved Data to Server username validation; now space is allowed
    • Added firmware version OID to the SNMP service
    • Added IP address family option field to the SNMP page
    • Added SNMPv6 section to the SNMP Communities page
    • Renamed the 'System -> Users' page to 'System -> System Users'
    • Moved password changing option to the 'System -> System Users' page
    • Switched to ar8216 driver
    • Added IPsec XAUTH support
    • Improved OpenVPN updown, init scripts to write info about instance in JSON
    • Added AES-256-GCM encryption support to OpenVPN
    • Added extra configuration parameters to DMVPN
    • Added PSK conversion to DMVPN and single PSK types
    • Improved Package Manager package installation, deletion and dependencies
    • Improved Package Manager download process over FOTA
    • Added new Input/Output values manageable over RMS
    • Added IPv6 traffic logging
    • Made 'Network -> Failover' and 'Network -> Interfaces' page data draggable on multiple browsers
    • Added Input/Output Post/Get URL parameter t_time changing delay and time to seconds or miliseconds
    • Added message storage management by config value
    • Improved QMI error handling and status tracking
    • Turned on modem in preinit for correct power-on sequence
    • Added Post/Get feature to turn mobile data on/off
    • Added the possibility to use 2gonly/3gonly/4gonly arguments for cellular service command alongside current 2g/3g/lte arguments
    • Added "Phone number" and "Message" fields for "Send SMS" option
    • Added "Host to ping from SIM1" and "Host to ping from SIM2" fields
    • Added support for multiple USB to Serial adapters
    • Added option to send SMS warning messages to Hotspot users authenticated with SMS OTP when specified amount of data is used up
    • Added "send analog input" option to TAVL settings
  • Fixes
    • Added glib2 patch to fix CVE-2019-13012 vulnerability
    • Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
    • Added WolfSSL patch to fix CVE-2021-3336 vulnerability
    • Added Busybox patch to fix CVE-2018-1000500 vulnerability
    • Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
    • Fixed Android clients IPsec MTU/MSS size
    • Fixed wrong IPsec DPD value saving
    • Changed IPsec PSK maximum length to 128 symbols
    • Fixed SSTP remaining up after package removal
    • Fixed DMVPN crypto_proposal write to config
    • Fixed I/O Juggler's SMS sending to correct group
    • Fixed I/O Scheduler's relay state issue
    • Added I/O direction check while changing IOs via I/O Post/Get
    • Fixed float endianness mismatch on some devices MODBUS TCP Master, MODBUS Serial Master
    • Fixed UPnP issue that caused config changes to apply only after service restart
    • Fixed WebUI files caching when upgrading firmware
    • Fixed WebUI date display format
    • Fixed MODBUS returning incomplete MAC address data
    • Fixed GPS time synchronization for DST regions
    • Fixed depleting IPv6 RA timeout when the ISP doesn't send RA updates
    • Added "Transaction timed out" error handling
    • Fixed PPPOE connection loss when wrong session PADT packet arrives
    • Added gcont object tracking and info update if this service is restarted
    • Fixed default SMS storage
    • Fixed SMS warning sending after Mobile Data Limit change
    • Fixed DHCP relaying over mobile networks
    • Changed PIN code maximum length to 8 symbols
    • Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects
    • Fixed 'Over IP' serial type's UDP issue in client mode
    • Fixed DLNA connections count total in statistics page
    • Fixed WiFi Hotspot's Walled Garden issues
    • Fixed WiFi Hotspot data logging issues
    • Fixed P2P group information processing vulnerability in wpa_supplicant
    • Added validation to Walled Garden Address list field
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut9xx_firmware_change_log&oldid=137249"