Template:Networking rutos manual network: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(48 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
  | series = {{{series}}}
  | series = {{{series}}}
  | name  = {{{name}}}
  | name  = {{{name}}}
  }}
  }}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Network (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Network (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Network (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Network (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
__TOC__
__TOC__
==Summary==
==Summary==
Line 21: Line 23:
The <b>Mobile</b> tab displays information about the mobile connection. The figure below is an example of the Mobile tab:
The <b>Mobile</b> tab displays information about the mobile connection. The figure below is an example of the Mobile tab:
{{#switch: {{{series}}}  
{{#switch: {{{series}}}  
| RUTX =
| RUTX | RUTM | RUTC =
   {{#switch: {{{name}}}  
   {{#switch: {{{name}}}  
   | RUTX09|RUTX11|RUTXR1|RUTX50 = [[File:Networking_rutx_manual_network_mobile_v2.png|border|class=tlt-border]]
   | RUTX09|RUTX11|RUTXR1|RUTX50|RUTM09|RUTM11|RUTM50|RUTM51|RUTX14|RUTC50 = [[File:Networking rutx manual network mobile v6.png|border|class=tlt-border]]
   | RUTX12 = [[File:Networking_rutx12_manual_network_mobile_v1.png|border|class=tlt-border]]
   | RUTX12|RUTM12|RUTM52 = [[File:Networking rutx12 manual network mobile v6.png|border|class=tlt-border]]
  | RUTX14 = [[File:Networking_rutx14_manual_network_mobile_v1.png|border|class=tlt-border]]
   }}
   }}
| TRB1 = [[File:Networking_trb14x_manual_network_v2.png]]
| TRB1|RUT2|RUT2M|RUT36X|TRB5|RUT361|TCR1|TRB16|RUT206 = [[File:Networking_trb14x_manual_network_v6.png|border|class=tlt-border]]
| TRB2 = [[File:Networking_trb2XX_manual_network_v1.png]]
| TRB2|RUT9|RUT9M|TRB2M|OTD140 = [[File:Networking_trb2XX_manual_network_v6.png|border|class=tlt-border]]
| TRB5 = [[File:Networking_trb5_manual_network_v1.png]]
| RUT36X = [[File:Networking_trb14x_manual_network_v2.png|border|class=tlt-border]]
| RUT9 = [[File:Networking_trb2XX_manual_network_v1.png|border|class=tlt-border]]
| RUT9M = [[File:Networking_trb2XX_manual_network_v1.png|border|class=tlt-border]]
| TCR1 = [[File:Networking_rutx_manual_network_mobile_v2.png|border|class=tlt-border]]
| RUT2|RUT2M = [[File:Networking_trb14x_manual_network_v2.png|border|class=tlt-border]]
}}
}}


Line 45: Line 40:
     </tr>
     </tr>
{{#switch: {{{series}}}  
{{#switch: {{{series}}}  
|  
|RUTX|RUTM|RUTC=
RUTX=
{{#switch:{{{name}}}
{{#ifeq:{{{name}}}|RUTX12|| <!-- dont show for rutx12 -->
    |RUTX12 | RUTM12 | RUTM52 =
    |#default= <!-- dont show for rutx12 -->
     <tr>
     <tr>
         <td>Sim card slot in use</td>
         <td>Sim card slot in use</td>
Line 53: Line 49:
     </tr>
     </tr>
}}
}}
|
| TRB2 | RUT9 | RUT9M | TRB2M | OTD140 =
TRB2XX=
    <tr>
        <td>Sim card slot in use</td>
        <td>Shows which sim card slot is currently in use</td>
    </tr>
|
RUT9=
     <tr>
     <tr>
         <td>Sim card slot in use</td>
         <td>Sim card slot in use</td>
         <td>Shows which sim card slot is currently in use</td>
         <td>Shows which sim card slot is currently in use</td>
     </tr>
     </tr>
|
|#default=
}}
}}
      <tr>
        <td>IMEI</td>
        <td>The IMEI (International Mobile Equipment Identity) is a unique 15 decimal digit number used to identify mobile modules. GSM network operators use the IMEI to identify devices in their networks</td>
    </tr>
     <tr>
     <tr>
         <td>SIM card state</td>
         <td>SIM card state</td>
Line 80: Line 65:
             </ul>
             </ul>
         </td>
         </td>
    </tr>
    <tr>
        <td>Provider</td>
        <td>Network operator's name</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 107: Line 96:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Cell ID</td>
         <td>Data connection state</td>
         <td>The ID of the cell that the modem is currently connected to</td>
         <td>Indicates whether the device has a mobile data connection or not.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Data connection state</td>
         <td>Connection stage</td>
         <td>Indicates whether the device has a mobile data connection or not</td>
         <td>Show intermediate stages of mobile connection establishing process.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Connection type</td>
         <td>Network type</td>
         <td>Mobile connection connection type. Possible values are:
         <td>Mobile network type. Possible values are:
             <ul>{{#ifeq: {{{5g}}} | 1 |
             <ul>{{#ifeq: {{{5g}}} | 1 |
                 <li> <b>5G</b>: 5G (NSA), 5G (SA)</li>|}}
                 <li> <b>5G</b>:{{#switch:{{{name}}}|RUT271|RUT976=|#default= 5G (NSA),}} 5G (SA)</li>|}}
                 <li> <b>4G</b>:  
                 <li> <b>4G</b>:  
{{#ifeq: {{{name}}} | TRB255 |  
{{#switch: {{{name}}} | TRB255 | TRB256 =
4G (NB), 4G (M1)
4G (NB), 4G (M1)
| 4G (LTE) }}
| #default = 4G (LTE) }}
</li>
</li>


{{#ifeq: {{{name}}} | TRB255 | |  
{{#switch: {{{name}}} | TRB255 | TRB256 | RUT271 | RUT976= | #default=
                 <li> <b>3G</b>: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS</li>
                 <li> <b>3G</b>: 3G (WCDMA), 3G (HSDPA), 3G (HSUPA), 3G (HSPA), 3G (HSPA+), 3G (DC-HSPA+), 3G (HSDPA+HSUPA), UMTS</li>
}}
}}


{{#ifeq: {{{2G}}} | 1 |  <!-- add variable for rut9 devices -->
{{#ifeq: {{{2g}}} | 1 |  <!-- add variable for rut9 devices -->
                 <li><b>2G</b>: 2G (GSM), 2G (GPRS), 2G (EDGE)</li>
                 <li><b>2G</b>: 2G (GSM), 2G (GPRS), 2G (EDGE)</li>
}}
}}
Line 137: Line 126:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Signal strength</td>
         <td>Carrier Aggregation</td>
        <td>LTE Advanced Carrier Aggregation, CA, is one of the key techniques used to enable the very high data rates of 4G to be achieved.
By combining more than one carrier together, either in the same or different bands it is possible to increase the bandwidth available and in this way increase the capacity of the link.
        </td>
    </tr>
    <tr>
        <td>Bandwidth</td>
        <td>Bandwidth describes the maximum data transfer rate of Internet connection.</td>
    </tr>
    <tr>
        <td>Connected band</td>
        <td>Currently used mobile frequency band.</td>
    </tr>
    <tr>
        <td>RSSI</td>
         <td>Received signal strength indicator (<b>[[RSSI]]</b>) measured in dBm. Values closer to 0 indicate a better signal strength</td>
         <td>Received signal strength indicator (<b>[[RSSI]]</b>) measured in dBm. Values closer to 0 indicate a better signal strength</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Carrier Aggregation</td>
        <td>Data received</td>
         <td>LTE Advanced Carrier Aggregation, CA, is one of the key techniques used to enable the very high data rates of 4G to be achieved.
        <td>Amount of data received through the mobile interface</td>
By combining more than one carrier together, either in the same or different bands it is possible to increase the bandwidth available and in this way increase the capacity of the link.
    </tr>
         </td>
    <tr>
  </tr>  
        <td>Data sent</td>
  <tr>
        <td>Amount of data sent through the mobile interface</td>
    </tr>
    <tr>
        <td>Cell ID</td>
        <td>The ID of the cell that the modem is currently connected to</td>
    </tr>
    <tr>
        <td>LAC/TAC</td>
         <td>
<ul>
<li><b>LAC</b> The Location Area Code, abbreviated as LAC is the unique number given to each location area within the network. The served area of a cellular radio access network is usually divided into location areas, consisting of one or several radio cells GSM/3G</li><li><b>TAC</b> Tracking Area Code is a numerical identifier used in LTE networks to distinguish different tracking areas. A tracking area is a group of cells that share the same identity for tracking and paging purposes. TAC is an essential parameter for the UE to determine its location within the LTE/5G network.</li>
</ul>
</td>
    </tr>
        <tr>
        <td>Physical cell ID</td>
        <td>Physical Cell ID is an identification of a cell at physical layer.</td>
    </tr>
        <tr>
        <td>ARFCN</td>
        <td>In mobile cellular networks, an absolute radio-frequency channel number (ARFCN) is a code that specifies a pair of physical radio carriers used for transmission and reception in a land mobile radio system, one for the uplink signal and one for the downlink signal.</td>
    </tr>
        <tr>
        <td>Mobile country code</td>
        <td>The Mobile Country Code, abbreviated as MCC, is the code uniquely identifying the home country of a (Glossary:Mobile network operator (MNO{{!}}mobile network operator (MNO).</td>
    </tr>
        <tr>
        <td>Mobile network code</td>
        <td>Mobile Network Code (MNC) is a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator.</td>
    </tr>
</table>
 
If mobile data limit is set and reached, near ''Connection'' column warning mark will appear. E.g.:
 
[[File:Networking rutos manual network mobile data limit.png|border|class=tlt-border]]
 
====Bands====
 
<br />
<table class="nd-othertables">
    <tr>
         <th colspan="2">bands information</th>
    </tr>
    <tr>
        <td>Name</td>
         <td>Connected band</td>
         <td>Connected band</td>
        <td>Currently used frequency band. For more information on supported frequency bands</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Other signal level measurements</td>
         <td>Other signal level measurements</td>
         <td>Overall signal quality for different connection types is defined by different measurements. Short explanations and recommendations are provided below. Click <b>[[Mobile Signal Strength Recommendations|here]]</b> for more in-depth information or click on one of the links below:
         <td>Overall signal quality for different network types is defined by different measurements. Short explanations and recommendations are provided below. Click <b>[[Mobile Signal Strength Recommendations|here]]</b> for more in-depth information or click on one of the links below:
             <ul>
             <ul>{{#ifeq: {{{5g}}} | 1 |
                <li> <b>5G</b>
                    <ul>
                        <li>[[RSRP and RSRQ|RSRP]] - reference signal received power, measured in dBm. Values closer to 0 indicate better signal strength</li>
                        <li>[[RSRP and RSRQ|RSRQ]] - reference signal received quality, measured in dB. Values closer to 0 indicate a better rate of information transfer</li>
                        <li>[[SINR]] - signal-to-interference-plus-noise ratio, measured in dB. Higher values indicate a better rate of information transfer</li>
                    </ul></li>|}}
                 <li><b>4G</b>
                 <li><b>4G</b>
                     <ul>
                     <ul>
Line 162: Line 214:
                 </li>
                 </li>


{{#ifeq: {{{name}}} | TRB255 | |  
{{#switch: {{{name}}} | TRB255 | TRB256 | RUT271 | RUT976 = | #default =
                 <li><b>3G</b>
                 <li><b>3G</b>
                     <ul>
                     <ul>
Line 171: Line 223:
}}
}}


{{#ifeq: {{{2G}}} | 1 |  
{{#ifeq: {{{2g}}} | 1 |  
                 <li><b>2G</b>
                 <li><b>2G</b>
                     <ul>
                     <ul>
Line 180: Line 232:
             </ul>
             </ul>
         </td>
         </td>
    </tr>
        <td>Bytes received</td>
        <td>Amount of data received through the mobile interface</td>
    </tr>
    <tr>
        <td>Bytes sent</td>
        <td>Amount of data sent through the mobile interface</td>
    </tr>
    <tr>
        <td>Restart Modem</td>
        <td>Restarts the devices module</td>
     </tr>
     </tr>
</table>
</table>
{{#ifeq: {{{series}}} | RUTX |
====Modem layout====


The <b>Modem layout</b> section visually indicates where the internal and external modems are positioned.
{{#switch: {{{name}}}
|RUTX09 = [[File:Networking_rutx09_manual_network_mobile_modem_layout.png|border|class=tlt-border]]
|RUTX11 = [[File:Networking_rutx11_manual_network_mobile_modem_layout.png|border|class=tlt-border]]
|RUTX12 = [[File:Networking_rutx12_manual_network_mobile_modem_layout.png|border|class=tlt-border]]
|RUTXR1 = [[File:Networking_rutxr1_manual_network_mobile_modem_layout.png|border|class=tlt-border]]
}}|}}
}} <!-- ends all mobile section -->
}} <!-- ends all mobile section -->


Line 209: Line 241:
This tab displays information about the device's local network(s). The figure below is an example of the '''Network''' window:
This tab displays information about the device's local network(s). The figure below is an example of the '''Network''' window:


[[File:Networking_rutos_manual_network_lan_v2.png|border|class=tlt-border]]
[[File:Networking rutos manual network lan ipv4 v1.png|border|class=tlt-border]]


<table class="nd-othertables">
<table class="nd-othertables">
     <tr>
     <tr>
         <th colspan="2">lan information</th>
         <th colspan="2">lan information</th>
    </tr>
     <tr>
     <tr>
         <td width="250">Name</td>
         <td width="250">Name</td>
Line 219: Line 252:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IP address</td>
         <td>Address</td>
         <td>IP address of the LAN interface</td>
         <td>IP address of the LAN interface</td>
     </tr>
     </tr>
Line 228: Line 261:
     <tr>
     <tr>
         <th colspan="2">dhcp leases</th>
         <th colspan="2">dhcp leases</th>
    </tr>
    <tr>
        <td>Interface</td>
        <td>Interface which leased the address</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 244: Line 281:
         <td>Leasetime Remaining</td>
         <td>Leasetime Remaining</td>
         <td>Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes. </td>
         <td>Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes. </td>
    </tr>
    <tr>
        <td>Static Lease</td>
        <td>This action will reserve currently assigned IP address for the device in Network -> Interfaces -> Static leases. </td>
     </tr>
     </tr>
</table>
</table>
{{#if: {{{wifi}}} |
==Wireless==


[[File:Networking_rutos_manual_status_network_wifi_{{{wifi}}}_v1.png|border|class=tlt-border]]
Similarly there is an IPv6 dedicated tab.
 
[[File:Networking rutos manual network lan ipv6 v1.png|border|class=tlt-border]]


<table class="nd-othertables">
<table class="nd-othertables">
    <tr>
        <th colspan="2">lan information</th>
    </tr>
    <tr>
        <td width="250">Name</td>
        <td width="900">LAN interface name</td>
    </tr>
    <tr>
        <td>Address</td>
        <td>IP address of the LAN interface</td>
    </tr>
    <tr>
        <td>Delegated prefix</td>
        <td>The delegated prefix is a smaller subnet given to a device to lease IPv6 addresses for its own DHCPv6 clients.</td>
    </tr>
    <tr>
        <th colspan="2">dhcp leases</th>
    </tr>
    <tr>
        <td>Interface</td>
        <td>Interface which leased the address</td>
    </tr>
    <tr>
        <td>Hostname</td>
        <td>Hostname of a LAN client</td>
    </tr>
    <tr>
        <td>Address</td>
        <td>IP address of a LAN client</td>
    </tr>
    <tr>
        <td>Delegated prefix</td>
        <td>The delegated prefix is a smaller subnet given to a device to lease IPv6 addresses for its own DHCPv6 clients.</td>
    </tr>
    <tr>
        <td>DUID</td>
        <td>DHCP unique identifier is used by DHCPv6 to identify device. Similar to MAC that is used by DHCPv4. </td>
    </tr>
    <tr>
        <td>Leasetime Remaining</td>
        <td>Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes. </td>
    </tr>
    <tr>
        <td>Static Lease</td>
        <td>This action will reserve currently assigned IP address for the device in Network -> Interfaces -> Static leases. </td>
    </tr>
</table>
==Firewall==
This tab displays information about the device's firewall. Info is shown of IPv4 and IPv6 traffic. The figure below is an example of the '''Firewall''' page tables:
[[File:Networking rutos manual status network firewall nat_v1.png|border|class=tlt-border]]
[[File:Networking rutos manual status network firewall raw_v1.png|border|class=tlt-border]]
[[File:Networking rutos manual status network firewall mangle_v1.png|border|class=tlt-border]]
[[File:Networking rutos manual status network firewall filter_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
     <tr>
     <tr>
         <th width="250">Field name</th>
         <th width="250">Field name</th>
Line 257: Line 359:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SSID</td>
         <td>Reset counters</td>
         <td>The broadcasted SSID (Service Set Identifier) of the wireless network</td>
         <td>Resets all traffic and packet fields</td>
     </tr>
     </tr>
    <tr>
        <td>Name</td>
        <td>Name of the chain</td>
    </tr>
    <tr>
        <td>Traffic</td>
        <td>Size of traffic that was matched to the chain</td>
    </tr>
    <tr>
        <td>Packets</td>
        <td>Count of packets that were matched to the chain</td>
    </tr>
    <tr>
        <td>Policy</td>
        <td>Policy for traffic entering the zone. </td>
    </tr>
    <tr>
        <td>Rules</td>
        <td>Count of rules the chain has</td>
    </tr>
    <tr>
        <td>References</td>
        <td>Count of times the chain was referenced in other chains </td>
    </tr>
</table>
----


For more information about specific firewall chain, <b>INFO</b> button can be pressed. Window like this should pop up:
[[File:Networking rutos manual status network firewall info.png|border|class=tlt-border]]
<table class="nd-mantable">
     <tr>
     <tr>
         <td>Wireless MAC</td>
         <th width="250">Field name</th>
         <td>The MAC (Media Access Control) address of the access point radio</td>
         <th width="900">Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Band</td>
         <td>Traffic</td>
         <td>The band defines which frequency used </td>
         <td>Size of traffic that was matched to the rule </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Signal</td>
         <td>Packets</td>
         <td>The signal quality between router's radio and some other device that is connected to the router</td>
         <td>Count of packets that were matched to the rule</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Bit rate</td>
         <td>Target</td>
         <td>The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP) </td>
         <td>Name of the rule (if highlighted you can click it to open modal to it) </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Mode</td>
         <td>Protocol</td>
         <td>Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks</td>
         <td>Filters by Internet protocol</td>
     </tr>
     </tr>
  <tr>
    <tr>
         <td>Encryption</td>
         <td>In</td>
         <td>The type of WiFi encryption used</td>
         <td>Filters by inbound interface</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Hostname</td>
         <td>Out</td>
         <td>Device's hostname</td>
         <td>Filters by outbound interface </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IP address</td>
         <td>Source</td>
         <td>Shows what IP address leased for device</td>
         <td>Filters by source address </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>MAC address</td>
         <td>Destination</td>
         <td>Device's MAC (Media Access Control) address</td>
         <td>Filters by destination address </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Signal</td>
         <td>Options</td>
         <td>Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm</td>
         <td>Additional iptables options</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RX rate</td>
         <td>Comment</td>
         <td>The rate at which packets are received from associated interface</td>
         <td>Filters by comment</td>
     </tr>
     </tr>
</table>
==Topology==
The <b>Topology</b> tab allows scanning of WAN, LAN or both interfaces via arp scan to check active connected devices. After scan it shows how many active devices were found and on which interface.
[[File:Networking_rutos_manual_status_network_topology_graf_v2.png|border|class=tlt-border]]
<b>All active devices</b>
This section displays the results of the scan.
[[File:Networking_rutos_manual_status_network_topology_table_v2.png|border|class=tlt-border]]
<table class="nd-othertables">
     <tr>
     <tr>
         <td>TX rate</td>
         <th width="250">field name</th>
         <td>The rate at which packets are sent to associated interface</td>
         <th width="900">description</th>
     </tr>
     </tr>
    <tr>
        <td>Hostname (Vendor)</td>
        <td>Hostname of scanned device </td>
    </tr>
    <tr>
        <td>IP Address</td>
        <td>IP address of scanned device </td>
    </tr>
    <tr>
        <td>MAC Address</td>
        <td>MAC address of scanned device </td>
    </tr>
    <tr>
        <td>Type</td>
        <td>The type of connection </td>
    </tr>
    <tr>
        <td>Interface</td>
        <td>The interface the scanned device is connected </td>
    </tr>
</table>
</table>


|}}
[[Category:{{{name}}} Status section]]
[[Category:{{{name}}} Status section]]

Latest revision as of 09:08, 26 November 2024

The information in this page is updated in accordance with firmware version .


Summary

The Network page contains information related to the device's networking. This chapter is an overview of the Network page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.


LAN

This tab displays information about the device's local network(s). The figure below is an example of the Network window:

lan information
Name LAN interface name
Address IP address of the LAN interface
Netmask Netmask of the LAN interface. In a sense, a netmask specifies the size of a network. In other words, it indicates which part of the IP address denotes the network, and which denotes the device
dhcp leases
Interface Interface which leased the address
Hostname Hostname of a LAN client
IP Address IP address of a LAN client
MAC Address MAC address of a LAN client
Leasetime Remaining Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes.
Static Lease This action will reserve currently assigned IP address for the device in Network -> Interfaces -> Static leases.

Similarly there is an IPv6 dedicated tab.

lan information
Name LAN interface name
Address IP address of the LAN interface
Delegated prefix The delegated prefix is a smaller subnet given to a device to lease IPv6 addresses for its own DHCPv6 clients.
dhcp leases
Interface Interface which leased the address
Hostname Hostname of a LAN client
Address IP address of a LAN client
Delegated prefix The delegated prefix is a smaller subnet given to a device to lease IPv6 addresses for its own DHCPv6 clients.
DUID DHCP unique identifier is used by DHCPv6 to identify device. Similar to MAC that is used by DHCPv4.
Leasetime Remaining Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes.
Static Lease This action will reserve currently assigned IP address for the device in Network -> Interfaces -> Static leases.

Firewall

This tab displays information about the device's firewall. Info is shown of IPv4 and IPv6 traffic. The figure below is an example of the Firewall page tables:

Field name Description
Reset counters Resets all traffic and packet fields
Name Name of the chain
Traffic Size of traffic that was matched to the chain
Packets Count of packets that were matched to the chain
Policy Policy for traffic entering the zone.
Rules Count of rules the chain has
References Count of times the chain was referenced in other chains


For more information about specific firewall chain, INFO button can be pressed. Window like this should pop up:

Field name Description
Traffic Size of traffic that was matched to the rule
Packets Count of packets that were matched to the rule
Target Name of the rule (if highlighted you can click it to open modal to it)
Protocol Filters by Internet protocol
In Filters by inbound interface
Out Filters by outbound interface
Source Filters by source address
Destination Filters by destination address
Options Additional iptables options
Comment Filters by comment

Topology

The Topology tab allows scanning of WAN, LAN or both interfaces via arp scan to check active connected devices. After scan it shows how many active devices were found and on which interface.

All active devices

This section displays the results of the scan.

field name description
Hostname (Vendor) Hostname of scanned device
IP Address IP address of scanned device
MAC Address MAC address of scanned device
Type The type of connection
Interface The interface the scanned device is connected

[[Category:{{{name}}} Status section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_network&oldid=137603"