Template:Networking rutos manual dlms: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} ==Summary...")
 
No edit summary
 
(33 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
  | series = {{{series}}}
  | series = {{{series}}}
  | name  = {{{name}}}
  | name  = {{{name}}}
Line 12: Line 14:
This manual page provides an overview of the DLMS functionality in {{{name}}} devices.
This manual page provides an overview of the DLMS functionality in {{{name}}} devices.


<b>Note:</b> DLMS is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.
<b>Note:</b> DLMS is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
<b>Note:</b> The count of DLMS connections is limited to 30, physical devices - up to 30, space groups - up to 10, cosem objects - up to 20 in each group.


==Main==
==Main==
The <b>Main</b> page is used to configure DLMS physical devices and Cosem Groups.
The <b>Main</b> page is used to configure DLMS physical devices and Cosem Groups.


===DLMS Client===
===General status===
----
----
The <b>DLMS Client</b> section is used to enable the service.
This section displays DLMS general status information.
 
[[File:Networking_rutos_manual_dlms_dlms_connections_status.png|border|class=tlt-border]]
 
Notice the Global section config. It is used to outright turn the service off or on if any active configurations are present.
 
[[File:Networking rutos manual dlms dlms physical devices global button v2.png|border|class=tlt-border]]


[[File:Networking_rutos_manual_dlms_dlms_client.png|border|class=tlt-border]]
Clicking the Cog icon opens a modal window. The global configuration slider can be set and it's state saved.


<table class="nd-mantable">
[[File:Networking rutos manual modbus modbus tcp client modbus tcp server devices global config modal v1.png|border|class=tlt-border]]
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off | on; default: <b>off</b></td>
        <td>Enables DLMS service.</td>
    </tr>
</table>


===DLMS Physical devices===
===DLMS Physical devices===
----
----
Interoperable devices in DLMS categorize as server (physical device) and client. Data collection device act as a client that supports system
Interoperable devices in DLMS categorize as server (physical device) and client. Data collection device act as a client that supports system
dependent features, parameters, functions and classes requesting data from the server (physical device). In this structure, communication protocol stack is independent of application layer so both devices may communicate different media. To add a new physical device, enter an new configuration name and click the 'Add' button.
dependent features, parameters, functions and classes requesting data from the server (physical device). In this structure, communication protocol stack is independent of application layer so both devices may communicate different media. To add a new physical device, click the 'Add' button.


[[File:Networking_rutos_manual_dlms_dlms_physical_devices_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dlms_dlms_physical_devices_add_button_v4.png|border|class=tlt-border]]


After clicking 'Add' you will be redirected to the newly added physical device's configuration page.
After clicking 'Add' you will be redirected to the newly added physical device's configuration page.


====DLMS Physical device configuration====
[[File:Networking_rutos_manual_dlms_dlms_physical_devices_configuration_v3.png|border|class=tlt-border]]
----
The <b>DLMS Physical device configuration</b> section is used to configure the parameters of server (physical device).
 
[[File:Networking_rutos_manual_dlms_dlms_physical_devices_configuration.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 69: Line 64:
     <tr>
     <tr>
         <td>Name</td>
         <td>Name</td>
         <td>string; default: <b>previously added device name</b></td>
         <td>string; default: <b>none</b></td>
         <td>Physical device name.</td>
         <td>Physical device name.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Server address</td>
         <td>Server address type</td>
        <td><span style="color:maroon">Default</span> {{!}} <span style="color:olive">Serial number</span>; default: <b>Default</b></td>
        <td>Select 'Default' for server address or 'Serial Number' for addressing by a specific serial number.</td>
    </tr>
    <tr>
        <td><span style="color:maroon">Server address</span></td>
         <td>integer [0..255]; default: <b>1</b></td>
         <td>integer [0..255]; default: <b>1</b></td>
         <td>DLMS device server address.</td>
         <td>DLMS device server address.</td>
    </tr>
    <tr>
        <td><span style="color:olive">Serial number</span></td>
        <td>unsigned integer; default: <b>1</b></td>
        <td>DLMS device serial number. Uses formula 'SN % 10000 + 1000'.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 89: Line 94:
     <tr>
     <tr>
         <td>Access security</td>
         <td>Access security</td>
         <td>none {{!}} <span style="color:red">Low</span> {{!}} <span style="color:red">High</span> {{!}} <span style="color:red">High MD5</span> {{!}} <span style="color:red">High SHA1</span> {{!}} <span style="color:blue">High GMAC</span>; default: <b>none</b></td>
         <td>none {{!}} <span style="color:red">Low</span> {{!}} <span style="color:red">High</span> {{!}} <span style="color:red">High MD5</span> {{!}} <span style="color:red">High SHA1</span> {{!}} <span style="color:blue">High GMAC</span> {{!}} <span style="color:red">HIGH SHA256</span>; default: <b>none</b></td>
         <td>DLMS device authentication type.</td>
         <td>DLMS device authentication type.</td>
     </tr>
     </tr>
Line 108: Line 113:
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:brown">Invocation counter OBIS code</span></td>
         <td>Authentication/Encryption/Authentication encryption: <span style="color:brown">Invocation counter OBIS code</span></td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>DLMS device invocation counter OBIS code.</td>
         <td>DLMS device invocation counter OBIS code.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue">Authentication key</span></td>
         <td>Authentication/Authentication encryption: <span style="color:blue">Authentication key</span></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>DLMS device authentication key.</td>
         <td>DLMS device authentication key.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue">Block cipher key</span></td>
         <td>Encryption/Authentication encryption: <span style="color:blue">Block cipher key</span></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>DLMS device block cipher key.</td>
         <td>DLMS device block cipher key.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:green">Dedicated key</span></td>
         <td>Encryption/Authentication encryption: <span style="color:green">Dedicated key</span></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>string (Length of the value must be 32); default: <b>none</b></td>
         <td>DLMS device dedicated key.</td>
         <td>DLMS device dedicated key.</td>
    </tr>
    <tr>
        <td>Logical name referencing</td>
        <td>on {{!}} off; default: <b>on</b></td>
        <td>DLMS devices use Logical Names to reference and access specific data objects or attributes during communication. For example, when requesting data from a device, you might reference a specific Logical Name to retrieve the information.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 133: Line 143:
     </tr>
     </tr>
</table>
</table>
===Scan device parameters===
----
After successfully adding the 'DLMS physical devices' configuration, and if the DLMS server is available, you can initiate a <b>Device Parameters</b> scan, which will write the parameters locally next to the cosem value configuration.
[[File:Networking_rutos_manual_dlms_dlms_physical_devices_scan_v1.png|border|class=tlt-border]]


===DLMS Cosem groups===
===DLMS Cosem groups===
----
----
To add a new cosem group, enter an new configuration name and click the 'Add' button.
To add a new cosem group, click the 'Add' button.


[[File:Networking_rutos_manual_dlms_dlms_cosem_groups_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dlms_dlms_cosem_groups_add_button_v3.png|border|class=tlt-border]]


After clicking 'Add' you will be redirected to the newly added cosem group's configuration page.
After clicking 'Add' you will be redirected to the newly added cosem group's configuration page.


====DLMS Cosem group configuration====
[[File:Networking_rutos_manual_dlms_dlms_cosem_groups_configuration v2.png|border|class=tlt-border]]
----
The <b>DLMS Cosem group configuration</b> section is used to configure the parameters of cosem groups.
 
[[File:Networking_rutos_manual_dlms_dlms_cosem_groups_configuration.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 161: Line 174:
     <tr>
     <tr>
         <td>Name</td>
         <td>Name</td>
         <td>string; default: <b>previously added cosem group name</b></td>
         <td>string; default: <b>none</b></td>
         <td>OBIS code group name.</td>
         <td>OBIS code group name.</td>
     </tr>
     </tr>
Line 178: Line 191:
====DLMS Cosem value====
====DLMS Cosem value====
----
----
To add a new cosem value, enter an new configuration name and click the 'Add' button.
<b>Cosem value</b> is a specific value retrieved from a defined server (physical device). To add a new cosem value, click the 'Add' button.


[[File:Networking_rutos_manual_dlms_dlms_cosem_value_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dlms_dlms_cosem_value_add_button_v4.png|border|class=tlt-border]]


After clicking 'Add' you will be redirected to the newly added cosem value's configuration page.
After clicking 'Add' you will be redirected to the newly added cosem value's configuration page.


[[File:Networking_rutos_manual_dlms_dlms_cosem_value_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dlms_dlms_cosem_value_configuration_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 199: Line 212:
     <tr>
     <tr>
         <td>Name</td>
         <td>Name</td>
         <td>string; default: <b>previously added cosem value name</b></td>
         <td>string; default: <b>none</b></td>
         <td>COSEM option name.</td>
         <td>COSEM option name.</td>
     </tr>
     </tr>
Line 212: Line 225:
         <td>OBIS code value, actions are not executed, only properties are read.</td>
         <td>OBIS code value, actions are not executed, only properties are read.</td>
     </tr>
     </tr>
        <tr>
    <tr>
         <td>COSEM class id</td>
         <td>COSEM class id</td>
         <td>string; default: <b>none</b></td>
         <td>DATA (ID: 1) {{!}} REGISTER (ID: 3) {{!}} EXTENDED REGISTER (ID: 4) {{!}} DEMAND REGISTER (ID: 5) {{!}} REGISTER ACTIVATION (ID: 6) {{!}} <span style="color:red">PROFILE GENERIC (ID: 7)</span> {{!}} CLOCK (ID: 8) {{!}} SCRIPT TABLE (ID: 9) {{!}} SPECIAL DAYS TABLE (ID: 11) {{!}} ASSOCIATION LOGICAL NAME (ID: 15) {{!}} SAP ASSIGNMENT (ID: 17) {{!}} IMAGE TRANSFER (ID: 18) {{!}} IEC LOCAL PORT SETUP (ID: 19) {{!}} ACTIVITY CALENDAR (ID: 20) {{!}} REGISTER MONITOR (ID: 21) {{!}} ACTION SCHEDULE (ID: 22) {{!}} IEC HDLC SETUP (ID: 23) {{!}} IEC TWISTED PAIR SETUP (ID: 24) {{!}} UTILITY TABLES (ID: 26) {{!}} MODEM CONFIGURATION (ID: 27) {{!}} AUTO ANSWER (ID: 28) {{!}} AUTO CONNECT (ID: 29) {{!}} PUSH SETUP (ID: 40) {{!}} TCP UDP SETUP (ID: 41) {{!}} IP4 SETUP (ID: 42) {{!}} MAC ADDRESS SETUP (ID: 43) {{!}} GPRS SETUP (ID: 45) {{!}} GSM DIAGNOSTIC (ID: 47) {{!}} IP6 SETUP (ID: 48) {{!}} COMPACT DATA (ID: 62) {{!}} SECURITY SETUP (ID: 64) {{!}} ARBITRATOR (ID: 68) {{!}} DISCONNECT CONTROL (ID: 70) {{!}} LIMITER (ID: 71); default: <b>DATA (ID: 1)</b></td>
         <td>OBIS code value, actions are not executed, only properties are read.</td>
         <td>Object type for OBIS code.</td>
    </tr>
    <tr>
        <td>Atributes</td>
        <td>list; default: <b>all</b></td>
        <td>Available attributes for the selected COSEM class (check it [https://www.gurux.fi/Gurux.DLMS.Objects here]).</td>
    </tr>
    <tr>
        <td><span style="color:red">Entries</span></td>
        <td>interger [1..32767]; default: <b>none</b></td>
        <td>How many data objects to read.</td>
    </tr>
</table>
 
=====Device Parameters=====
Parameters that are found after scan has finished.
 
[[File:Networking_rutos_manual_dlms_dlms_cosem_value_configuration_device_parameters_v1.png|border|class=tlt-border]]
 
==Connections==
The <b>Connections</b> page is used to configure DLMS connections. You can use either TCP or serial (depending on the router) connection to establish a connection between the physical device and the router.
 
===General status===
----
This section displays DLMS general status information.
 
[[File:Networking_rutos_manual_dlms_dlms_connections_status.png|border|class=tlt-border]]
 
===DLMS Connections===
----
To add a new connection, click the 'Add' button.
 
[[File:Networking_rutos_manual_dlms_dlms_connections_add_button_v2.png|border|class=tlt-border]]
 
After clicking 'Add' you will be redirected to the newly added connection's configuration page.
 
[[File:Networking_rutos_manual_dlms_dlms_connections_configuration_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Enables Cosem state.</td>
    </tr>
    <tr>
        <td>Name</td>
        <td>string; default: <b>previously added connection name</b></td>
        <td>Name of DLMS connection configuration.</td>
    </tr>
    <tr>
        <td>Connection type</td>
        <td>TCP {{#ifeq: {{{serial}}} | 1 | {{!}} <span style="color:red">Serial</span> |}}; default: <b>TCP</b></td>
        <td>DLMS connection type.</td>
    </tr>{{#ifeq: {{{serial}}} | 1 |
    <tr>
        <td><span style="color:red">Serial device</span></td>
        <td>{{Template: Networking rutos manual serial ports| rs232={{{rs232}}}| rs485={{{rs485}}}| usb = {{{usb}}}}}; default: <b>{{Template: Networking rutos manual default serial port| rs232={{{rs232}}}| rs485={{{rs485}}}| usb = {{{usb}}}}}</b></td>
        <td>DLMS serial device.</td>
    </tr>
    <tr>
        <td>Baud rate</td>
        <td>300 {{!}} 1200 {{!}} 2400 {{!}} 4800 {{!}} 9600 {{!}} 19200 {{!}} 38400 {{!}} 57600 {{!}} 115200{{#ifeq: {{{rs485}}} | 1 | {{!}} 230400 {{!}} 460800 {{!}} 921600 {{!}} 1000000 {{!}} 3000000|}}; default: <b>9600</b></td>
        <td>Serial data transmission rate (in bits per second).</td>
    </tr>
    <tr>
        <td>Data bits</td>
        <td>{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|{{#ifeq:{{{series}}}|TRB2||5 {{!}} 6 {{!}}}} 7 {{!}} |}}8; default: <b>8</b></td>
        <td>Number of data bits for each character.</td>
    </tr>
    <tr>
        <td>Stop bits</td>
        <td>1{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1| {{!}} 2|}}; default: <b>1</b></td>
        <td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
    </tr>
    <tr>
        <td>Parity</td>
        <td>Even {{!}} Odd{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1| {{!}} Mark {{!}} Space|}} {{!}} None; default: <b>None</b></td>
        <td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
            <ul>
                <li><b>None</b> (<b>N</b>) - no parity method is used.</li>
                <li><b>Odd</b> (<b>O</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.</li>
                <li><b>Even</b> (<b>E</b>) - the parity bit is set so that the number of "logical ones (1s)" has to be even.</li>{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|<li><b>Space</b> (<b>s</b>) - the parity bit will always be a binary 0.</li>
                <li><b>Mark</b> (<b>M</b>) - the parity bit will always be a binary 1.</li>|}}
            </ul>
        </td>
    </tr>
    <tr>
        <td>Flow control</td>
        <td>None {{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1| {{!}} RTS/CTS {{!}} Xon/Xoff|}}; default: <b>None</b></td>
        <td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.
{{#ifeq:{{#expr: {{{rs232}}} or {{{usb}}}}} |1|<ul>
                <li><b>RTS/CTS</b> - hardware handshaking. RTS and CTS are turned OFF and ON from alternate ends to control data flow, for instance when a buffer is almost full.</li>
                <li><b>Xon/Xoff</b> - software handshaking. The Xon and Xoff characters are sent by the receiver to the sender to control when the sender will send data, i.e., these characters go in the opposite direction to the data being sent. The circuit starts in the "sending allowed" state. When the receiver's buffers approach capacity, the receiver sends the Xoff character to tell the sender to stop sending data. Later, after the receiver has emptied its buffers, it sends an Xon character to tell the sender to resume transmission.</li>
            </ul>|}}
        </td>
    </tr>{{#ifeq: {{{rs485}}} | 1 |
    <tr>
        <td><span style="color:blue">RS485:</span> Full Duplex</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Enables RS485 full duplex.</td>
    </tr>|}}}}
    <tr>
        <td>IP address</td>
        <td>ip; default: <b>none</b></td>
        <td>DLMS device IP address for TCP connection.</td>
    </tr>
    <tr>
        <td>Port</td>
        <td>integer [1..65535]; default: <b>none</b></td>
        <td>DLMS device IP port for TCP connection.</td>
    </tr>
    <tr>
        <td>Persistent</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Open TCP connection once and reuse it between requests.</td>
     </tr>
     </tr>
</table>
</table>
[[Category:{{{name}}} Services section]]

Latest revision as of 09:30, 27 November 2024

The information in this page is updated in accordance with firmware version .

Summary

The DLMS / COSEM standard suite (IEC 62056 / EN 13757- 1) is the most widely accepted international utility meter data exchange standard. DLMS is the application layer protocol that transforms the data into messages and COSEM describes the general object model and can be used for all kinds of presentations.

This manual page provides an overview of the DLMS functionality in {{{name}}} devices.

Note: DLMS is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page. Note: The count of DLMS connections is limited to 30, physical devices - up to 30, space groups - up to 10, cosem objects - up to 20 in each group.

Main

The Main page is used to configure DLMS physical devices and Cosem Groups.

General status

This section displays DLMS general status information.

Notice the Global section config. It is used to outright turn the service off or on if any active configurations are present.

Clicking the Cog icon opens a modal window. The global configuration slider can be set and it's state saved.

DLMS Physical devices

Interoperable devices in DLMS categorize as server (physical device) and client. Data collection device act as a client that supports system dependent features, parameters, functions and classes requesting data from the server (physical device). In this structure, communication protocol stack is independent of application layer so both devices may communicate different media. To add a new physical device, click the 'Add' button.

After clicking 'Add' you will be redirected to the newly added physical device's configuration page.

Field Value Description
Enable off | on; default: off Enables specific physical device configuration.
Connection empty ; default: none DLMS connection.
Name string; default: none Physical device name.
Server address type Default | Serial number; default: Default Select 'Default' for server address or 'Serial Number' for addressing by a specific serial number.
Server address integer [0..255]; default: 1 DLMS device server address.
Serial number unsigned integer; default: 1 DLMS device serial number. Uses formula 'SN % 10000 + 1000'.
Logic server address integer [0..255]; default: 0 DLMS device logical server address.
Client address integer [0..255]; default: 16 DLMS device client address.
Access security none | Low | High | High MD5 | High SHA1 | High GMAC | HIGH SHA256; default: none DLMS device authentication type.
Password string; default: none DLMS device password if authentication is used.
Interface type HDLC | WRAPPER; default: HDLC DLMS device interface type.
Transport security none | Authentication | Encryption | Authentication encryption; default: none DLMS device message encryption.
Authentication/Encryption/Authentication encryption: Invocation counter OBIS code string; default: none DLMS device invocation counter OBIS code.
Authentication/Authentication encryption: Authentication key string (Length of the value must be 32); default: none DLMS device authentication key.
Encryption/Authentication encryption: Block cipher key string (Length of the value must be 32); default: none DLMS device block cipher key.
Encryption/Authentication encryption: Dedicated key string (Length of the value must be 32); default: none DLMS device dedicated key.
Logical name referencing on | off; default: on DLMS devices use Logical Names to reference and access specific data objects or attributes during communication. For example, when requesting data from a device, you might reference a specific Logical Name to retrieve the information.
Test -(interactive button) Test device configuration.


Scan device parameters

After successfully adding the 'DLMS physical devices' configuration, and if the DLMS server is available, you can initiate a Device Parameters scan, which will write the parameters locally next to the cosem value configuration.

DLMS Cosem groups

To add a new cosem group, click the 'Add' button.

After clicking 'Add' you will be redirected to the newly added cosem group's configuration page.

Field Value Description
Enable off | on; default: off Enables Cosem group.
Name string; default: none OBIS code group name.
Interval integer [1..4294967295]; default: 1 Interval for OBIS code reading (in seconds).
Test -(interactive button) Test cosem group.

DLMS Cosem value

Cosem value is a specific value retrieved from a defined server (physical device). To add a new cosem value, click the 'Add' button.

After clicking 'Add' you will be redirected to the newly added cosem value's configuration page.

Field Value Description
Enable off | on; default: off Enables Cosem state.
Name string; default: none COSEM option name.
Physical device selection; default: none Physical device to read from.
OBIS code string; default: none OBIS code value, actions are not executed, only properties are read.
COSEM class id DATA (ID: 1) | REGISTER (ID: 3) | EXTENDED REGISTER (ID: 4) | DEMAND REGISTER (ID: 5) | REGISTER ACTIVATION (ID: 6) | PROFILE GENERIC (ID: 7) | CLOCK (ID: 8) | SCRIPT TABLE (ID: 9) | SPECIAL DAYS TABLE (ID: 11) | ASSOCIATION LOGICAL NAME (ID: 15) | SAP ASSIGNMENT (ID: 17) | IMAGE TRANSFER (ID: 18) | IEC LOCAL PORT SETUP (ID: 19) | ACTIVITY CALENDAR (ID: 20) | REGISTER MONITOR (ID: 21) | ACTION SCHEDULE (ID: 22) | IEC HDLC SETUP (ID: 23) | IEC TWISTED PAIR SETUP (ID: 24) | UTILITY TABLES (ID: 26) | MODEM CONFIGURATION (ID: 27) | AUTO ANSWER (ID: 28) | AUTO CONNECT (ID: 29) | PUSH SETUP (ID: 40) | TCP UDP SETUP (ID: 41) | IP4 SETUP (ID: 42) | MAC ADDRESS SETUP (ID: 43) | GPRS SETUP (ID: 45) | GSM DIAGNOSTIC (ID: 47) | IP6 SETUP (ID: 48) | COMPACT DATA (ID: 62) | SECURITY SETUP (ID: 64) | ARBITRATOR (ID: 68) | DISCONNECT CONTROL (ID: 70) | LIMITER (ID: 71); default: DATA (ID: 1) Object type for OBIS code.
Atributes list; default: all Available attributes for the selected COSEM class (check it here).
Entries interger [1..32767]; default: none How many data objects to read.
Device Parameters

Parameters that are found after scan has finished.

Connections

The Connections page is used to configure DLMS connections. You can use either TCP or serial (depending on the router) connection to establish a connection between the physical device and the router.

General status

This section displays DLMS general status information.

DLMS Connections

To add a new connection, click the 'Add' button.

After clicking 'Add' you will be redirected to the newly added connection's configuration page.

Field Value Description
Enable off | on; default: off Enables Cosem state.
Name string; default: previously added connection name Name of DLMS connection configuration.
Connection type TCP ; default: TCP DLMS connection type.
IP address ip; default: none DLMS device IP address for TCP connection.
Port integer [1..65535]; default: none DLMS device IP port for TCP connection.
Persistent off | on; default: off Open TCP connection once and reuse it between requests.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_dlms&oldid=137774"