|
|
| (70 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| <p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.03.4'''] firmware version .</p>
| |
| ==Introduction==
| |
| This article contains instructions on how to setup BACnet on Teltonika Networks devices.
| |
|
| |
|
| ==Configuration overview and prerequisites==
| |
|
| |
| Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.
| |
|
| |
| '''Prerequisites''':
| |
| * RUT955;
| |
| * BACnet controller;
| |
| * Server;
| |
| * An end device (PC, Laptop, Tablet, Smartphone) for configuration;
| |
|
| |
| If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI"''' mode. You can do that by '''clicking''' the '''"Basic"''' button '''under''' '''"Mode,"''' which is located at the top-right corner of the WebUI.
| |
| [[File:Networking rutx manual webui basic advanced mode.gif|border|center|class=tlt-border|1004x1004px]]
| |
|
| |
| '''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.
| |
|
| |
| == BACnet ==
| |
|
| |
| === BACnet ===
| |
| ----
| |
| Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' and '''enable''' the '''instance'''. Everything else can be left as default or changed according to your needs.
| |
|
| |
| [[File:BACnet enable instance.png|border|center|class=tlt-border|818x210px]]
| |
|
| |
| === Server ===
| |
| ----
| |
| For the server, Yet Another BACnet Explorer (YABE) is used. YABE is an open-source BACnet Explorer that is designed to be lightweight, fast, and easy to use.
| |
|
| |
| Open the software and '''click''' on the '''green plus sign''' to add a new device. Then a new window will pop up, there select '''local endpoint IP address (1)''' and click '''start'''. Everything else cane be left as default or changed according to your needs.
| |
|
| |
| [[File:Yabe configuration add device fixed.png|border|center|class=tlt-border|639x203px]]
| |
|
| |
| Select newly created communication node and right - click on it to send '''WhoIs''' request (application might send these automatically).
| |
|
| |
| [[File:Yabe whois.png|border|center|class=tlt-border|364x126px]]
| |
|
| |
| === Results ===
| |
| ----
| |
| In case of success you see the connected BACnet device and its parameters.
| |
|
| |
| [[File:Yabe successful connection.png|border|center|class=tlt-border|914x530px]]
| |
|
| |
| == BACnet/IP configuration ==
| |
| This is the most commonly used type of BACnet, which is designed to work over Ethernet networks using the Internet Protocol (IP). It supports both IPv4 and IPv6 addressing.
| |
|
| |
| For this configuration you must have a Public IP address. You can read up more on this in our article on '''[[Private and Public IP Addresses]]'''.
| |
|
| |
| === Router 1 ===
| |
| ----
| |
|
| |
| ==== BACnet ====
| |
| ----
| |
| Install the BACnet package on RUT955 and navigate to '''Services → BACnet''' → '''enable''' the '''instance'''. Everything else can be left as default or changed according to your needs.
| |
|
| |
| [[File:BACnet enable instance.png|border|center|class=tlt-border|818x210px]]
| |
|
| |
| ==== Firewall ====
| |
| ----
| |
| The configuration will also require you to add port forward rule in the firewall configuration. To do that, open Router1 WebUI and navigate to '''Network → Firewall → Port Forwards'''. Create a port forward rule to forward UDP packets from Router2 WAN to Router1 LAN address port.
| |
|
| |
| [[File:Router1 firewall port forward.png|border|center|class=tlt-border|797x617px]]
| |
|
| |
| # '''Enable''' instance
| |
| # '''Name''' - enter desired name
| |
| # '''Protocol''' - UDP
| |
| # '''Source zone''' - WAN
| |
| # '''External port''' - YABE port
| |
| # '''Internal zone''' - LAN
| |
| # '''Internal IP address''' - PC LAN IP
| |
| # '''Internal port''' - YABE port
| |
|
| |
| '''Note''': When YABE sends registration packets you will need to find out which port YABE is using (One way is to look through the traffic with wireshark on your PC or TCP dump on router 1 or router 2)
| |
|
| |
| If you restart YABE software or delete and create new communication device, YABE might use different port number, and you will need to change port forward configured in router connected to your PC.
| |
|
| |
| === Router 2 ===
| |
| ----
| |
|
| |
| ==== BACnet ====
| |
| ----
| |
| Navigate to '''Services → BACnet''', there:
| |
|
| |
| # '''Enable''' BACnet
| |
| # '''Enable''' BBMD
| |
| # '''BBMD interface''' - select the interface with Public IP.
| |
| # '''Enable Port forward''' - this will automatically create a port forward rule.
| |
|
| |
| [[File:BACnet enabled BBMD.png|border|center|class=tlt-border|746x305px]]
| |
|
| |
| Everything else can be left as default or changed according to your needs.
| |
|
| |
| ==== Firewall ====
| |
| ----
| |
| If you would like manually creating a port forward rule, navigate to '''Network → Firewall → Port Forwards'''.
| |
|
| |
| [[File:BACnet firewall router2.png|border|center|class=tlt-border|864x602px]]
| |
|
| |
| # '''Enable''' instance
| |
| # '''Name''' - enter desired name
| |
| # '''Protocol''' - UDP
| |
| # '''Source zone''' - WAN
| |
| # '''External port''' - 47808
| |
| # '''Internal zone''' - LAN
| |
| # '''Internal IP address''' - Router LAN IP
| |
| # '''Internal port''' - 47808
| |
|
| |
| === Server ===
| |
| ----
| |
| Open YABE and create IP communication node by click on '''add device'''.
| |
|
| |
| <<SCREENSHOT>>
| |
|
| |
| Then select the node and go to '''Meniu → Functions → IP services → Foreign device registration''' and enter public IP address of Router2 (the one connected to controller).
| |
|
| |
| <<SCREENSHOT>>
| |
|
| |
| === Results ===
| |
| ----
| |
| In case of success you see the device connected via gateway.
| |
|
| |
| <<SCREENSHOT>>
| |
|
| |
| == See also ==
| |
| [[RUT955_BACnet|BACnet]] on RUT955
| |
|
| |
| == External links ==
| |
| [https://sourceforge.net/projects/yetanotherbacnetexplorer/ Yabe]
| |
