QSG RUTM54: Difference between revisions

This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTM54 5G Router'''. Here you will find an overview of the various components on the front and back of a RUTM54 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.

<table>

     <tr>

   <td style="vertical-align: top; margin: 10px; padding-top: 75px; padding-right: 50px;">[[File:RUTM54_Render_Back_View.png|right|210px]]</td>

     </tr>

Before starting operating the device, please review recommendations and precautions to minimize the possibility of accidents. Safety precautions presented are supplementary and subject to the local safety regulations. When various operations are executed on the device, the user must fully follow the safety instructions and recommendations provided with the device.

{| class="wikitable"

|- style="font-weight:bold;"

|-

|Max RF power

|- style="font-weight:bold;"

| colspan="2" style="text-align:center;" | Bundled accessories specifications*

|-

|Input: 0.6A@100-240 VAC, Output: 12 VDC, 1.5A, 4-pin plug  

|-

|1575.42~1602 MHz, 2.2~5 VDC, VSWR<1.5, active total gain** 28 dB (typ.), RHCP polarization, SMA male connector

|-

|2400~2500 /4950~5850 MHz, 50Ω, VSWR<2, gain** 3dBi, omnidirectional, RP-SMA male connector

|}

<small><nowiki>**</nowiki> Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.</small>

RUTM54 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

'''FCC Caution:''' Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.

This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.

This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

! Antenna type !! Maximum antenna gain (dBi) !! Impedance (ohm)

|-

|}

! Type d’antenne !! Gain d’antenne maxima (dBi) !! Impédance (ohm)

|-

|}  

3. Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée.

* Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.

* Out of direct sunlight

'''Attention:''' operation outside the permissible range can considerably shorten the service life of the device.

* Do not attempt to disassemble the device or its accessories.

* If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.

* Only use approved accessories.

* It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1mm2.

* You alone are responsible for how you use your device and any consequences related to its use.

* The device may become warm during regular use.

== Front view ==

</table>

== Hardware installation ==

<tr>

     </tr>

<tr>

     </tr>

</table>