DAP145 LEDs: Difference between revisions
Created page with "{{Template: Networking_rutos_manual_leds <!------------------------DEVICE-----------------------> | name = DAP145 | series = DAP14X <!----------------------SEPARATORS---------------------> | 2g = 0 <!-- 1 has 2G; 0 doesn't have 2G --> | 5g = 1 <!-- 1 has 5G; 0 doesn't have 5G --> | eth = 1 <!-- 1 has ETH; 0 doesn't have ETH --> | eth_leds = 2 <!-- 1 for green; 2 for green & orange --> | mobile = 1 <!-- 1 has mobile; 0 do..." |
m Vainius.l moved page Draft:DAP145 LEDs to DAP145 LEDs without leaving a redirect |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
<!----------------------SEPARATORS---------------------> | <!----------------------SEPARATORS---------------------> | ||
| 2g = 0 <!-- 1 has 2G; 0 doesn't have 2G --> | | 2g = 0 <!-- 1 has 2G; 0 doesn't have 2G --> | ||
| 5g = | | 5g = 0 <!-- 1 has 5G; 0 doesn't have 5G --> | ||
| eth = 1 <!-- 1 has ETH; 0 doesn't have ETH --> | | eth = 1 <!-- 1 has ETH; 0 doesn't have ETH --> | ||
| eth_leds = | | eth_leds = 1 <!-- 1 for green; 2 for green & orange --> | ||
| mobile = | | mobile = 0 <!-- 1 has mobile; 0 doesn't have mobile --> | ||
| mobile_leds = | | mobile_leds = 0 <!-- number of mobile signal strength type LEDs --> | ||
| power_leds = 1 <!-- number of power LEDs --> | | power_leds = 1 <!-- number of power LEDs --> | ||
| wan = | | wan = 0 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs --> | ||
| wifi = | | wifi = 0 <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs --> | ||
}} | }} | ||
Latest revision as of 16:05, 28 October 2025
Main Page > DAP Industrial Access Points > DAP145 > DAP145 Manual > DAP145 LEDsThis page contains information the different types of LEDs and their behaviour on a DAP145 device.
Power LED
The power LED is located on the bottom left corner of the front panel.
It indicates whether the device is powered on or not.
| State | Description |
|---|---|
| LED turned on | Device is powered on. |
| LED turned off | Device is not powered on. |
Ethernet port LEDs
The Ethernet port LEDs are located on the device's front panel, under each respective Ethernet port.
| State | Description |
|---|---|
| LED on | Operating as a 10/100 Mbps connection. |
| LED off | No link established. |
| LED blinking | Connection established and there is activity on this port (data being transferred). |