Jump to content
  • EN

Template:Configuration examples RUTOS: Difference between revisions

From Teltonika Networks Wiki
← Older edit
VisualWikitext
No edit summary
No edit summary
 
(140 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{Template: Networking_device_configuration_examples
This page contains various configuration guides for the {{#ifeq: {{{main}}} | 1 | Teltonika Networks routers | {{{name}}} router}}. Unlike the articles in the {{#ifeq: {{{main}}} | 1 | router manuals | <b>[[{{{name}}} Manual]]</b>}}, which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.
| name = {{{name}}}
}}


__TOC__
__TOC__


==Router control and monitoring==
{{#ifeq: {{{routerOrGateway}}} | 1 |
===Router control and monitoring===


* [[{{{name}}} Configuration Backup|Configuration Backup]]
<ul>
* [[Command line interfaces]]
    <li>[[Configuration Backup RutOS|Configuration Backup]]</li>
* [[{{{name}}} Monitoring via JSON-RPC windows|JSON-RPC (Windows)]]
    <li>[[Command Line Interfaces|Command line interfaces]]</li>
* [[{{{name}}} Monitoring via JSON-RPC linux|JSON-RPC (Linux)]]
    <li>[[Monitoring via MQTT|MQTT (Linux guide)]]</li>
* [[Monitoring via MQTT|MQTT (Linux guide)]]
    <li>[[UCI command usage]]</li>
* [[Configuring Modbus TCP Master]]
    <li>[[Crontabs]]</li>
* [[UCI command usage]]
    <li>[[SSH RSA key authentication (Linux)]]</li>
* [[Crontabs]]
    <li>[[SSH RSA key authentication (Windows)]]</li>
* [[Relayd]]
    <li>[[Monitoring with ThingsBoard IoT Platform]]</li>
* [[SSH RSA key authentication (Linux)]]
    <li>[[Monitoring via JSON-RPC windows RutOS|Monitoring via JSON-RPC windows]]</li>
* [[SSH RSA key authentication (Windows)]]
    <li>[[Monitoring via JSON-RPC linux RutOS|Monitoring via JSON-RPC linux]]</li>
{{#ifeq: {{{rs232}}} | 1 | * [[Reaching Cisco router console port remotely]]}}
    <li>[[Monitoring via Zabbix]]</li>
{{#ifeq: {{{rs232rs485}}} | 1 |* [[How to simulate Modbus serial communication]]}}
    <li>[[Monitoring via Modbus]]</li>
* [[{{{name}}} Monitoring via Modbus|Monitoring via Modbus]]
    <li>[[Firewall traffic rules]]</li>
* [[{{{name}}} modbus custom register block| Modbus custom register block]]
    <li>[[Removing HTTPS Warnings with Device-Generated Certificates|Removing HTTPS Warnings with Device-Generated Certificates]]</li>
    <li>[[Eliminating HTTPS Warnings: Using Let's Encrypt|Eliminating HTTPS Warnings: Using Let's Encrypt]]</li>
    <li>[[MQTT broker bridge]]</li>
    <li>[[OPC UA Configuration Example]]</li>
    <li>[[Setting up external Radius server for RUTOS authentication]]</li>
    <li>[[SSHFS]]</li>
    <li>[[TLS_Certificates|Certificate generation configuration example]]</li>
   
</ul>
===VPN===


==System upgrades==
<ul>
{{#ifeq: {{{series}}} | TRB1xx | |
    <li>[[RUTX_DMVPN | DMVPN configuration example]]</li>
* [[{{{series}}} Bootloader Upgrade|Bootloader Upgrade]]
    <li>[[DMVPN_with_IPsec_Phase_3 | DMVPN with IPsec configuration example]]</li>
* [[{{{series}}} Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]]
    <li>[[DMVPN_(Phase_3)_with_OSPF_configuration_example| DMVPN with OSPF configuration example]]</li>
}}
    <li>[[OpenVPN configuration examples|OpenVPN configuration example]]</li>
* [[Firmware upgrade via command line]]
    <li>[[IPsec RUTOS configuration example|IPsec cofiguration example]]</li>
    <li>[[ZeroTier Configuration|ZeroTier configuration example]]</li>
    <li>[[L2TP configuration examples RutOS| L2TP configuration example]]</li>
    <li>[[Overlapping subnets with IPsec solution]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between RUTOS devices|GRE over IPsec Tunnel]]</li>
    <li>[[IPsec_Tunnel_with_X.509_Authentication_configuration_example]]</li>
    <li>[[L2TP over IPsec RutOS| L2TP over IPsec RutOS]]</li>
    <li>[[Default_IPsec_route_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec default route configuration example]]</li>
    <li>[[IPsec_site_to_site_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec site to site configuration example]]</li>
    <li>[[Setting up an IPsec tunnel between Teltonika Networks and Cisco devices|Cisco IPsec]]</li>
    <li>[[Setting up a GRE tunnel between Teltonika Networks and Cisco devices| Cisco GRE]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Cisco devices]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik GRE over IPsec Tunnel]]</li>
    <li>[[Setting up a SSTP tunnel between Teltonika Networks and Mikrotik devices|Mikrotik SSTP]]</li>
    <li>[[Setting up an OpenVPN tunnel between Teltonika Neworks and Mikrotik devices|Mikrotik OpenVPN]]</li>
    <li>[[Setting up a L2TP over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik L2TP over IPsec]]</li>
    <li>[[Creating OpenVPN access server and connecting it to a Teltonika Networks router|OpenVPN Access Server]]</li>
    <li>[[OpenVPN_Access_Control|OpenVPN Access control]]</li>
    <li>[[Setting up an IPsec tunnel between RUT and Android phone]]</li>
    <li>[[Tinc VPN configuration example WebUI]]</li>
    <li>[[L2TP over IPsec PC|L2TP over IPsec VPN to a PC configuration example]]</li>
    <li>[[OpenVPN traffic split]]</li>
    <li>[[Default_IPsec_route_configuration_between_Teltonika_Networks_devices | Default IPsec route configuration between Teltonika Networks devices]]</li>
    <li>[[OpenVPN over Stunnel RutOS|OpenVPN over Stunnel]]</li>
    <li>[[L2 LAN bridging over internet using L2TPv2+EoIP]]</li>
    <li>[[1NCE Configuration]]</li>
    <li>[[RutOS ExpressVPN configuration example|ExpressVPN configuration example]]</li>
    <li>[[RutOS NordVPN configuration example|NordVPN configuration example]]</li>
    <li>[[WireGuard Configuration Example|WireGuard Configuration Example]]</li>
</ul>
===IoT platforms===
<ul>
    <li>[[Azure IoT Hub Cloud Connection]]</li>
    <li>[[Cumulocity Configuration | Cumulocity]]</li>
    <li>[[Da³vid configuration example|da³vid]]</li>
    <li>[[AWS MQTT cloud connection|AWS MQTT cloud connection]]</li>
    <li>[[BAG·Tower|BAG Tower]]</li>
    <li>[[N3uron Notifier]]</li>
</ul>
===DLMS===
<ul>
    <li>[[DLMS_client_configuration_example|DLMS client configuration example]]</li>
</ul>
===PC===
====Windows====
<ul>
    <li>[[Setting up a Static IP address on a Windows 10 PC|Static IP address setup (Windows 10)]]</li>
    <li>[[OpenVPN client on Windows]]</li>
    <li>[[OpenVPN server on Windows]]</li>
    <li>[[How to generate TLS certificates (Windows)?|TLS certificates (Windows)]]</li>{{#ifeq: {{{lan}}} | 1 |<li>[[Wake on LAN PC setup (Windows)]]</li>|}}
</ul>
====Linux====
<ul>
    <li>[[Setting up a Static IP address on a Ubuntu 16.04 PC|Static IP address setup (Ubuntu 16)]]</li>
    <li>[[Setting up an FTP server on a Ubuntu 16.04 PC|FTP server (Ubuntu 16)]]</li>
    <li>[[OpenVPN client on Linux]]</li>
    <li>[[How to generate TLS certificates (Ubuntu 18)?|TLS certificates (Ubuntu 18)]]</li>
</ul>
===DDNS===
<ul>
    <li>[[Noip.com_DDNS_configuration_RUTOS|Noip.com DDNS configuration example]]</li>
    <li>[[Dynu.com_DDNS_configuration_RUTOS|Dynu.com DDNS configuration example]]</li>
</ul>
===System upgrades===
<ul>
    {{#ifeq: {{{bootloader}}} | 1  |<li>[[Bootloader menu|Firmware upgrade via the Bootloader Menu]]</li>|}}
    <li>[[Firmware_upgrade_via_command_line|Firmware upgrade via command line]]</li>
</ul>
===DNP3===
<ul>
    <li>[[DNP3_TCP_Client_Configuration_example|DNP3 TCP client configuration example]]</li>
</ul>
===SNMP===
<ul>
    <li>[[{{{name}}}_SNMP|SNMP configuration example]]</li>
</ul>
===Camera===
<ul>
{{#ifeq: {{{lan}}} | 1 |<li>[[Camera access from VPN RUTOS]]</li>
<li>[[Hikvision: remote camera access|Remote camera access]]</li>|}}
<li>[[Camera access from smartphone]]</li>
</ul>
|}}
{{#ifeq: {{{wifi}}} | 1 |
===Wireless===


{{#ifeq: {{{sim}}} | 1 |==Modem control==
<ul>
    <li>[[WiFi_WAN_example|Wi-Fi WAN configuration example]]</li>
    <li>[[How_to_set_up_a_guest_WiFi_network|Guest Wi-Fi network configuration example]]</li>
    <li>[[Wireless_Mesh_configuration_example|Wireless Mesh configuration example]]</li>
    <li>[[RUTOS_relay_/_Wi-Fi_extender_/_repeater_/_bridge_configuration|Relay / Wi-Fi extender / Repeater/ Bridge configuration example]]</li>
    <li>[[WiFi_roaming_setup_for_home/small_office|Wi-Fi roaming setup for home or small office]]</li>
    <li>[[Connecting_to_a_Hotspot_WiFi_for_Internet_Connectivity|Connecting to a Hotspot Wi-Fi for internet connectivity]]</li>
    <li>[[Setting_up_external_Radius_server_for_Hotspot_authentication|Setting up external Radius server for Hotspot authentication]]</li>
    <li>[[Relayd_RutOS|Relayd]]</li>
    <li>[[IdBlender Secure WiFi Setup - RUTX Routers|IdBlender Secure WiFi Setup]]</li>
    <li>[[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]</li>
    <li>[[Extending_Router_Hotspot_Network_with_TAP100|Extending Router Hotspot Network with TAP100]]</li>


* [[AT Commands]]
</ul>
* [[gsmctl commands]]
|}}
* [[Multi-APN | Multi-APN (Multiple PDN)]]}}


==Connection backup==


* [[{{{name}}} VRRP configuration|VRRP]]
{{#ifeq: {{{wan}}} | 1 |
===WAN===
<ul>
    <li>[[Setting up WAN as LAN]]</li>
    <li>[[Load Balancing Rules/Policies examples]]</li>
    <li>[[OSPF Route Failover]]<li>
    <li>[[VRRP example|VRRP configuration example]]</li>
    <li>[[Starlink_Failover_Configuration|Starlink Failover Configuration]]</li>
</ul>
|}}
{{#ifeq: {{{lan}}} | 1 |
===LAN===


==VPN==
<ul>
    <li>[[Setting up a PPPoE between Teltonika Networks router and a Mikrotik device]]</li>
    <li>[[VLAN Inter-Zone accessibility control configuration example]]</li>
    <li>[[LAN as WAN RutOS | LAN as WAN configuration example]]</li>
    <li>[[VLAN: Tag-Based RUTOS | VLAN: Tag-Based configuration example]]</li>
    <li>[[Blocking_Internet_Access_for_LAN_Clients|Blocking Internet access for LAN clients]]</li>
    <li>[[VLAN_Set_Up|VLAN Set Up configuration example]]</li>
    <li>[[VXLAN_Configuration_Example|VXLAN configuration example]]</li>
</ul>
===DHCP===
<ul>
    <li>[[DHCP Relay configuration example]]</li>
    <li>[[DHCP_RELAY_over_L2TPv3|DHCP Relay over L2TPv3]]</li>
</ul>
|}}
{{#ifeq: {{{usb}}} | 1 |
===USB===


* [[How to generate TLS certificates (Windows)?]]
<ul>
* [[OpenVPN configuration examples]]
    <li>[[How to set up a USB printer (Windows) RUTOS | How to set up a USB printer (Windows)]]</li>
* [[OpenVPN traffic split]]
</ul>
* [[IPsec configuration examples]]
|}}
* [[GRE Tunnel configuration examples]]
{{#ifeq: {{{rs}}} | 1 |
* [[PPTP configuration examples]]
===RS232/RS485===
* [[L2TP configuration examples]]
* [[L2TP over IPsec]]
* [[{{{name}}} L2TP over IPsec (Windows 10) | L2TP over IPsec (Windows 10)]]
* [[DMVPN configuration]]
* [[ZeroTier One VPN configuration]]
* [[OpenVPN over Stunnel {{{name}}}|OpenVPN over Stunnel]]
* [[RUT955 Setting a GRE tunnel via cli | Setting a GRE tunnel via cli]]
* [[Setting up a GRE tunnel between RUT and Cisco device]]
* [[Setting up a GRE tunnel between RUT and Cisco device via Cisco CLI]]
* [[Setting up an IPsec tunnel between RUT and Cisco device]]
* [[Setting up a L2TP over IPsec tunnel between RUT and Mikrotik device]]
* [[Setting up an OpenVPN tunnel between RUT and Mikrotik device]]
* [[Setting up a SSTP tunnel between RUT and Mikrotik device]]
* [[Overlapping subnets with IPsec solution]]


==DDNS==
<ul>
    <li>[[Data transfer from Modbus TCP to Modbus RTU Gateway]]</li>
    <li>[[Modbus RTU Master MQTT Serial Gateway]]</li>
    <li>[[BACnet configuration example]]</li>
    <li>[[Bidirectional communication between two serial devices over TCP/IP]]</li>
    <li>[[Connect Serial Devices as Virtual COM Ports using TRB145 and HW VSP3]]</li>
    <li>[[Reaching Cisco router console port remotely RutOS|Reaching Cisco router console port remotely]]</li>
    <li>[[Serial OverIP communication between Server and Client]]</li>
</ul>
|}}
{{#ifeq: {{{sim}}} | 1 |
===Mobile===


* [[noip.com DDNS configuration|noip.com]]
<!-- * [[dnsdynamic.org DDNS configuration|dnsdynamic.org]]-->
* [[dynu.com DDNS configuration|dynu.com]]
* [[dyn.com DDNS configuration|dyn.com]]
{{#ifeq: {{{usb}}} | 1 |==USB==
* [[How to set up a USB printer (Windows)]]
* [[How to set up a USB modem]]}}
{{#ifeq: {{{rs232rs485}}} | 1 |==RS232/485==
*[[Bidirectional communication between two serial devices over TCP/IP]]}}
==Email==
* [[Sending emails via command line]]
==Camera==
{{#ifeq: {{{eth}}} | 1 |* [[Camera access from VPN RUTOS]]
* [[Hikvision: remote camera access|Remote camera access]]}}
* [[Camera access from smartphone]]
==PC==
* [[Setting up a Static IP address on a Windows 10 PC]]
* [[Setting up a Static IP address on a Ubuntu 16.04 PC]]
* [[Setting up an FTP server on a Ubuntu 16.04 PC]]
* [[OpenVPN client on Windows]]
* [[OpenVPN client on Linux]]
* [[OpenVPN server on Windows]]
* [[{{{name}}} Wake on LAN PC setup (Windows)|Wake on LAN PC setup (Windows)]]
==SNMP==
* [[SNMP configuration example]]
==Use cases==
* [[Connecting two same subnet office networks using OpenVPN bridge (TAP) on {{{series}}}]]
* [[Connecting to the office network remotely from your home via VPN (L2TP over IPsec) using {{{series}}}]]
* [[Configuring clients to access internet through office's gateway from home using VPN {{{series}}}]]
* [[Anonymous browsing from your home network using NordVPN and {{{series}}} router]]
* [[Anonymous browsing from your home network using ExpressVPN and {{{series}}} router]]
{{#ifeq: {{{di}}} | 1 |===I/O Juggler===
<ul>
<ul>
<li>[[SMS and Email alerts Triggered by BAT120]]</li>
    <li>[[AT Commands]]</li>
</ul>}}
    <li>[[Locking Devices to a Mobile Cell]]</li>
 
    <li>[[RUTOS_gsmctl_Commands | GSMCTL commands]]</li>
==Third party services==
    <li>[[Multi-APN]]</li>
 
    <li>[[ESIM_Configuration_example|eSIM configuration example]]</li>
===VPN===
    <li>[[SMS_Forwarding_Configuration_Example|SMS forwarding configuration example]]</li>
 
        <li>[[5G_Mobile_Antennas|5G Mobile Antennas]]</li>
* [[vpngate.net VPN configuration|vpngate.net]]
</ul>
* [[Vpnbook.com VPN configuration|vpnbook.com]]
|}}
* [[hide.me VPN configuration|hide.me]]
{{#ifeq: {{{di}}} | 1 |<br>
* [[{{{series}}} NordVPN configuration example]]
===Hardware application===
* [[{{{series}}} ExpressVPN configuration example]]
<ul>
 
{{#ifeq: {{{di}}} | 1 | <li>[[Ignition detection solution]]</li> <li>[[SMS and Email alerts Triggered by BAT120]]</li>}}
===IoT platforms===
{{#ifeq: {{{bt}}} | 1 | <li>[[Teltonika EYE device pairing and data sender configuration example | Teltonika EYE device pairing and data sender]]</li>
 
<li>[[How to use UBUS commands for Bluetooth device scanning / pairing]]</li>|}}
* [[{{{name}}} Azure IoT Hub cloud connection | Azure IoT Hub cloud connection]]
</ul>
* [[Telenor cloud connection]]
|}}
* [[cobot.me Hotspot Configuration|cobot.me]]
{{#ifeq: {{{mbus}}} | 1 |
* [[Da³vid configuration example|da³vid]]
===M-Bus===
 
<ul>
{{#ifeq: {{{wifi}}} | 1 |===WiFi===
    <li>[[Example_of_sending_M-Bus_data_to_a_server|Sending M-bus data to a Node-red server configuration example]]</li>
 
    <li>[[M-bus:_Collecting_and_sending_M-Bus_data_to_server|Sending M-bus data to a HTTP/MQTT server configuration example]]</li>
* [[How to set up a guest WiFi network on RUT|How to set up a guest WiFi network on RUT]]
</ul>
* [[IdBlender Secure WiFi Setup - RUT Routers|IdBlender Secure WiFi Setup]]
|}}
* [[ironwifi.com Hotspot Configuration|ironwifi.com]]
{{#ifeq: {{{docker}}} | 1 |
* [[purple.ai Hotspot Configuration|purple.ai]]
===Docker===
* [[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]
<ul>
* [[RUTOS relay / Wi-Fi extender / repeater / bridge configuration]]}}
    <li>[[Docker_Configuration_Example|Docker configuration example]]</li>
 
</ul>
==DHCP Relay==
|}}
* [[DHCP Relay configuration example]]
{{#ifeq: {{{python}}} | 1 |
 
===Python===
[[Category:{{{name}}}]]
<ul>
    <li>[[Setting up Python on RutOS|Setting up Python on RutOS]]</li>
</ul>
|}}

Latest revision as of 09:36, 12 November 2025

This page contains various configuration guides for the {{{name}}} router. Unlike the articles in the [[{{{name}}} Manual]], which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.








Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Configuration_examples_RUTOS&oldid=160975"