Template:Networking device leds: Difference between revisions
mNo edit summary |
No edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 25: | Line 25: | ||
| TRB14x|TRB2xx|TRB5 = Gateway | | TRB14x|TRB2xx|TRB5 = Gateway | ||
| TRM2xx = Modem | | TRM2xx = Modem | ||
| TSW1xx|TSW2xx|TSW3|TSW0 = Switch | | TSW1xx|TSW2xx|TSW3|TSW0|TSF = Switch | ||
| Router}} is powered up</td> | | Router}} is powered up</td> | ||
</tr> | </tr> | ||
| Line 33: | Line 33: | ||
| TRB14x|TRB2xx|TRB5 = Gateway | | TRB14x|TRB2xx|TRB5 = Gateway | ||
| TRM2xx = Modem | | TRM2xx = Modem | ||
| TSW1xx|TSW2xx|TSW3|TSW0 = Switch | | TSW1xx|TSW2xx|TSW3|TSW0|TSF = Switch | ||
| Router}} is not power up</td> | | Router}} is not power up</td> | ||
</tr> | </tr> | ||
| Line 79: | Line 79: | ||
The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. | The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. By default, when you press and hold the reset button, after 6 seconds it initiates a <b>Factory reset</b>. If there is a User's default configuration configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a <b>User's default configuration reset</b> and 12 seconds (by default) to initiate a <b>Factory reset</b>. If the button was held down longer than 20 seconds (by default) no action will be taken. | ||
While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that {{#expr: {{{sig_led_num}}} * 2}} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button. | While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that {{#expr: {{{sig_led_num}}} * 2}} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button. | ||
Revision as of 13:56, 9 December 2025
This wiki page contains information about {{{name}}} router LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the front panel, near the power connector:
[[File:{{{file_power_led}}}|{{{size_power_led}}}px]]
It can perform two different actions:
| Action | Description |
|---|---|
| LED turned ON | Router is powered up |
| LED turned OFF | Router is not power up |
[[Category:{{{name}}} Manual]]