RUTM16 UDP Broadcast Relay: Difference between revisions
Created page with "{{Template:Networking_rutos_manual_udp_broadcast_relay <!------------------------DEVICE-----------------------> | name = RUTM16 | series = RUTM }}" |
m Vainius.l moved page Draft:RUTM16 UDP Broadcast Relay to RUTM16 UDP Broadcast Relay without leaving a redirect |
(No difference)
| |
Latest revision as of 14:45, 6 January 2026
Main Page > RUTM Routers > RUTM16 > RUTM16 Manual > RUTM16 WebUI > RUTM16 Network section > RUTM16 UDP Broadcast RelayThe information in this page is updated in accordance with firmware version RUTM_R_00.07.20.1.
Summary
This manual page provides an overview of UDP broadcast relay page in RUTM16 devices.
UDP Broadcast Relay
The UDP Broadcast Relay will listen for broadcast traffic on the specified interface port and relay that traffic to the specified interface(s).
Note: UDP Broadcast Relay is additional software that can be installed from the System → Package Manager page.
The relay list is empty by default. To add a new UDP broadcast relay click the 'Add' button.
Appears UDP broadcast relay, which should look similar to this:
| Field | Value | Description |
|---|---|---|
| Source interface | lan | wan; default: lan | The interface from which the traffic will be redirected to. |
| Port | integer [0..655353]; default: none | Specify a port which the UDP broadcast relay will listen on for incoming packets to relay. |
| Destination interface | lan | wan; default: none | UDP broadcast relay destination interfaces. |
| Enabled | off | on; default: off | Turns UDP Broadcast Relay on or off. |
| Actions | -(interactive button); default: Delete | Removes UDP Broadcast relay instance. |