31,703
edits
Changes
Reaching Cisco router console port remotely (view source)
Revision as of 12:43, 22 January 2019
, 12:43, 22 January 2019Created page with "Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → <b>USB Tools</b> → USB to Serial page: Fil..."
Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → <b>[[RUT955 USB Tools|USB Tools]]</b> → USB to Serial page:
[[File:Cisco usb config.png]]
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
[[File:cisco rs v2.png]]
RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used:
[[File:cisco rs config.png]]
[[File:Cisco usb config.png]]
Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:
[[File:cisco rs v2.png]]
RS232 can be configured from the Services → RS232/RS485 → <b>[[RUT955_RS232/RS485#RS232|RS232 Configuration]]</b> page. The following RS232 configuration should be used:
[[File:cisco rs config.png]]