Reaching Cisco router console port remotely

Introduction

This article describes how to connect to a console of another device (e.g., a Cisco router, Fortigate firewall, etc.)

Prerequisites

You will need:

• A RUT955 router
• An RS232 (male) - RJ45 cable (to connect to a Cisco AUX port):
  
• Or a USB type Mini - USB type A cable (to connect to a USB type mini console port):
  

Configuration

There are multiple ways to connect to a console port, which are described in the sections below:

RS232 - RJ45

---

RS232 can be configured from the Services → RS232/RS485 → RS232 Configuration page. The following RS232 configuration should be used:

USB

---

Using Mini USB – USB type A configuration. Configured from the WebUI, Services → USB Tools → USB to Serial page:

PuTTY configuration

---

The console can be accessed by using software such as PuTTY (can be downloaded from here.

The PuTTY configuration should look like this:

Console port

---

Example of console ports: