Difference between revisions of "Template:Networking rut9xx manual network wan"

From Teltonika Networks Wiki
Line 28: Line 28:
 
                         <li><b>Qmi2</b> - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks</li>
 
                         <li><b>Qmi2</b> - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks</li>
 
                         <li><b>PPP</b> - Point-to-Point Protocol; uses a dialling number to establish a data connection</li>
 
                         <li><b>PPP</b> - Point-to-Point Protocol; uses a dialling number to establish a data connection</li>
−
                         <li><b>NCM</b> - Network Control Model, a protocol by which USB hosts and devices  can efficiently exchange Ethernet frames (this is the connection type when using a Huawei USB modem)</li>
+
                         {{#ifeq:{{{name}}}|RUT955|<li><b>NCM</b> - Network Control Model, a protocol by which USB hosts and devices  can efficiently exchange Ethernet frames (this is the connection type when using a Huawei USB modem)</li>|}}
 
                     </ul>
 
                     </ul>
 
                 </li>
 
                 </li>

Revision as of 16:33, 13 March 2019

WAN

The WAN section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page:

[[File:{{{file_wan}}}]]

Field Description
Interface WAN type. Possible values are:
  • Mobile
  • Wired
  • Wireless
Type [[{{{name}}}_Mobile#Mobile_Configuration|Connection type]] or [[{{{name}}}_WAN#Common_Configuration|protocol]]. The value displayed in this field is dependent on used WAN type. Possible values are:
  • Mobile WAN or USB modem
    • Qmi2 - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks
    • PPP - Point-to-Point Protocol; uses a dialling number to establish a data connection
  • Wired WAN
    • DHCP - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters
    • Static - WAN network interface controller configuration parameters are set manually (used when the WAN gateway is not a DHCP server)
    • PPPoE - Point-to-Point Protocol over Ethernet; used to establish a Digital Subscriber Line (DSL) Internet service connection
  • WiFi WAN
    • DHCP - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters
    • Static - WAN network interface controller configuration parameters are set manually (used when the WAN gateway is not a DHCP server)
IP address Router's WAN IP address
WAN MAC MAC address of the WAN network interface controller (WiFi radio or WAN Ethernet port). This field is only visible if main WAN is set to Wired or WiFi
Netmask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device
Gateway Gateway of the default route - an IP address through which the router reaches the Internet
DNS DNS servers used by the main WAN connection
Connected Currently used WAN connection uptime
Ports Displays an image of the router's back panel with highlighted Ethernet ports that are currently in use
WAN Failover Status Displays the router's current WAN failover status
Refresh Refreshes all information fields in the page

WAN settings can be customized via the Network → [[{{{name}}} WAN|WAN]] page.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut9xx_manual_network_wan&oldid=30522"