Difference between revisions of "VCode"
(15 intermediate revisions by the same user not shown) | |||
Line 9: | Line 9: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| Codec 8 |
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| Codec 8 extended |
UDP channel header | UDP channel header | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| Codec 12 |
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| Codec 13 |
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| Codec 16 |
|- | |- | ||
| 0x08 || 0x8E || 0x0C || 0x0D || 0x10 | | 0x08 || 0x8E || 0x0C || 0x0D || 0x10 | ||
Line 26: | Line 26: | ||
Below table represents AVL data packet structure. | Below table represents AVL data packet structure. | ||
− | |||
− | + | {| class="wikitable" | |
+ | |- | ||
+ | ! style="background: #0052A1; color: white;"| 4 zeros | ||
+ | ! style="background: #0052A1; color: white;"| Data field length | ||
+ | ! style="background: #0052A1; color: white;"| Codec ID | ||
+ | ! style="background: #0052A1; color: white;"| Number of Data 1 | ||
+ | ! style="background: #0052A1; color: white;"| AVL Data | ||
+ | ! style="background: #0052A1; color: white;"| Number of Data 2 | ||
+ | ! style="background: #0052A1; color: white;"| CRC-16 | ||
+ | |- | ||
+ | | 4 bytes || 4 bytes || 1 byte || 1 byte || 30-147 bytes || 1 byte || 4 bytes | ||
+ | |} | ||
+ | |||
+ | Number of data – number of encoded data (number of records). | ||
+ | Codec ID is constant 08. | ||
+ | |||
+ | Data field length is the length of bytes [codec id, number of data 2]. | ||
+ | Number of data 1 should always be equal to number of data 2 byte. | ||
+ | CRC-16 is 4 bytes, but first two are zeroes and last two are CRC-16 calculated for [codec id, number of data 2] | ||
+ | Minimum AVL packet size is 45 bytes (all IO elements disabled). | ||
+ | Maximum AVL packet size for one record is 783 bytes. | ||
+ | *''AVL data'' | ||
− | + | {| class="wikitable" | |
+ | |- | ||
+ | ! style="background: #0052A1; color: white;"| Timestamp | ||
+ | ! style="background: #0052A1; color: white;"| Priority | ||
+ | ! style="background: #0052A1; color: white;"| GPS Element | ||
+ | ! style="background: #0052A1; color: white;"| IO element | ||
+ | |- | ||
+ | | 8 bytes || 1 byte || 15 bytes || 6-123 | ||
+ | |} | ||
− | |||
− | + | Timestamp – difference, in milliseconds, between the current time and midnight, January 1, 1970 UTC | |
− | |||
− | + | *''Priority'' | |
− | |||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | + | ||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | style="background | + | | style="background: #0052A1; color: white;"|0 || Low |
− | |||
− | |||
− | |||
− | | | ||
|- | |- | ||
− | | style="background | + | | style="background: #0052A1; color: white;"|1 || High |
− | |||
− | |||
− | |||
− | | | ||
|- | |- | ||
− | | | + | | style="background: #0052A1; color: white;"|2 || Panic |
− | | | + | |} |
− | | | + | |
− | | | + | |
− | + | *''GPS Element'' | |
+ | |||
+ | |||
+ | {| class="wikitable" | ||
|- | |- | ||
− | | style="background: white; | + | ! style="background: #0052A1; color: white;"| Longitude |
− | + | ! style="background: #0052A1; color: white;"| Latitude | |
− | + | ! style="background: #0052A1; color: white;"| Altitude | |
+ | ! style="background: #0052A1; color: white;"| Angle | ||
+ | ! style="background: #0052A1; color: white;"| Satellites | ||
+ | ! style="background: #0052A1; color: white;"| Speed | ||
|- | |- | ||
− | | | + | | 4 bytes || 4 bytes || 2 bytes || 2 bytes || 1 bytes || 2 bytes |
− | + | |} | |
− | |||
− | |||
− | |||
− | | | ||
− | | | ||
− | |||
− | |||
− | |||
− | | | ||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | | | ||
− | |||
− | |||
− | | | ||
− | | | ||
− | |||
− | |||
− | |||
− | | | ||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
− | + | X Longitude | |
− | + | Y Latitude1 | |
− | + | Altitude In meters above sea level1 | |
− | + | Angle In degrees, 0 is north, increasing clock-wise 1 | |
− | + | Satellites Number of visible satellites1 | |
− | + | Speed in km/h. 0x0000 if GPS data is invalid1 | |
− | + | Longitude and latitude are integer values built from degrees, minutes, seconds and milliseconds by formula | |
− | + | [[Image:197.png]] | |
− | + | d - Degrees | |
− | + | m - Minutes | |
− | + | s - Seconds | |
− | + | ms - Milliseconds | |
− | + | p - Precision (10000000) | |
− | + | If longitude is in west or latitude in south, multiply result by –1. To determine if the coordinate is negative, convert it to binary format and check the very first bit. If it is 0, coordinate is positive, if it is 1, coordinate is negative. | |
− | + | Example: | |
− | + | ||
− | + | Received value: 20 9c ca 80 | |
+ | Converted to BIN: 00100000 10011100 11001010 10000000 first bit is 0, which means coordinate is positive | ||
+ | Converted to DEC: 547146368 | ||
+ | For more information see two‘s complement arithmetics. | ||
− | |||
− | + | *''IO Element'' | |
− | + | {| class="wikitable" | |
+ | |- | ||
− | + | | style="background: #0052A1; color: white;"|Event IO ID || 1 byte | |
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N of Total IO || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N1 of One Byte IO || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO Value || 1 byte | ||
+ | |- | ||
+ | | ... || | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N1’th IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N1’th IO Value || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N2 of Two Bytes || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO Value || 2 bytes | ||
+ | |- | ||
+ | | |... || | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N2’th IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N2’th IO Value || 2 bytes | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N4 of Four Bytes || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO Value || 4 byte | ||
+ | |- | ||
+ | | |... || | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N4’th IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N4’th IO Value || 4 bytes | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N8 of Eight Bytes || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|1’st IO Value || 8 bytes | ||
+ | |- | ||
+ | | |... || | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N8’th IO ID || 1 byte | ||
+ | |- | ||
+ | | style="background: #0052A1; color: white;"|N8’th IO Value || 8 bytes | ||
+ | |} | ||
+ | Event IO ID – if data is acquired on event – this field defines which IO property has changed and generated an event. If data cause is not event – the value is 0. | ||
− | + | N total number of properties coming with record (N=N1+N2+N4+N8) | |
− | + | N1 number of properties, which length is 1 byte | |
− | + | N2 number of properties, which length is 2 bytes | |
− | + | N4 number of properties, which length is 4 bytes | |
− | + | N8 number of properties, which length is 8 bytes | |
− | |||
− | + | '''Example''' | |
− | + | Received data: | |
− | |||
− | |||
− | + | <span style="background-color: #848484">00000000</span><span style="background-color: #A9BCF5">0000008c</span><span style="background-color: #04B45F">08</span><span style="background-color: #FF0000">01</span><span style="background-color: #9F81F7">0000013feb55ff74</span><span style="background-color: #D8D8D8">00</span><span style="background-color: #FFFF00">0f0ea850</span><span style="background-color: #FAAC58">209a6900</span><span style="background-color: #2EFE2E">0094</span><span style="background-color: #088A29">0000</span>120000<span style="background-color: #0040FF">00</span> | |
− | + | <span style="background-color: #A9A9F5">1e</span><span style="background-color: #DF3A01">09</span>010002000300040016014703f0001504c800<span style="background-color: #DF3A01">0c</span>0900730a00460b00501300464306 | |
− | + | d7440000b5000bb60007422e9 | |
+ | f180000cd0386ce0001<span style="background-color: #DF3A01">07</span>c700000000f10000601a4600 | ||
− | + | 0001344800000bb84900000bb84a00000bb84c00000000<span style="background-color: #DF3A01">02</span>4e0000000000000000cf00 | |
− | + | 00000000000000<span style="background-color: #FF0000">01</span><span style="background-color: #F5DA81">00003fca</span> | |
− | + | In total 152 Bytes | |
− | |||
− | + | <span style="background-color: #848484">00000000</span> 4 zeroes, 4 bytes | |
− | + | <span style="background-color: #A9BCF5">0000008c</span> data length, 4 bytes | |
− | + | <span style="background-color: #04B45F">08</span> – Codec ID | |
− | + | <span style="background-color: #FF0000">01</span> Number of Data (1 record) 1’st record data | |
− | |||
− | |||
− | + | <span style="background-color: #9F81F7">010000013feb55ff74</span> – Timestamp in milliseconds (1374042849140) | |
− | + | GMT: Wed, 17 Jul 2013 06:34:09 GMT | |
− | <span style="background-color: # | + | <span style="background-color: #D8D8D8">00</span> – Priority |
− | + | GPS Element | |
− | + | <span style="background-color: #FFFF00">0f0ea850</span> – Longitude 252618832 = 25,2618832º N | |
− | + | <span style="background-color: #FAAC58">209a6900</span> – Latitude 546990336 = 54,6990336 º E | |
− | + | <span style="background-color: #2EFE2E">0094</span> – Altitude 148 meters | |
− | + | <span style="background-color: #088A29">0000</span> – Angle 0 | |
− | + | <span style="background-color: #088A29">12</span> – 18 Visible satellites | |
− | + | <span style="background-color: #088A29">0000</span> – 0 km/h speed | |
− | + | IO Element | |
− | + | <span style="background-color: #0040FF">00</span> – IO element ID of Event generated (in this case when 00 – data generated not on event) | |
− | + | <span style="background-color: #A9A9F5">1e</span> – 30 IO elements in record (total) | |
− | + | <span style="background-color: #DF3A01">09</span> – 9 IO elements, which length is 1 Byte | |
− | + | 0 – IO element ID = 01 | |
− | + | 0 – IO element’s value = 0 | |
− | + | 02 – IO element ID = 02 | |
− | + | 0 – IO element’s value = 0 | |
− | + | 03 – IO element ID = 03 | |
− | 0 – IO element’s value | + | 0 – IO element’s value = 0 |
− | + | 4 – IO element ID = 04 | |
− | 0 – IO element’s value | + | 0 – IO element’s value = 0 |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | 16 – IO element ID = 22 (dec) | |
− | |||
− | |||
− | |||
− | |||
+ | 0 – IO element’s value = 1 | ||
− | + | 47 – IO element ID = 71 (dec) | |
− | + | 03 – IO element’s value = 3 | |
− | + | F0 – IO element ID = 240 (dec) | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | 0 – IO element’s value = 0 | ||
+ | 15 – IO element ID = 21 (dec) | ||
− | + | 04 – IO element’s value = 0 | |
− | + | C8 – IO element ID = 200 (dec) | |
− | + | 0 – IO element’s value = 0 | |
− | + | <span style="background-color: #DF3A01">0c</span> – 12 IO elements, which value length is 2 Bytes | |
+ | |||
+ | 09 – IO element ID = 9 (dec) | ||
− | + | 0073 – IO element’s value | |
− | + | 0a – IO element ID = 10 (dec) | |
− | + | 0046 – IO element’s value | |
− | + | 0b – IO element ID = 11 (dec) | |
− | + | 0050 – IO element’s value | |
− | + | 13 – IO element ID = 19 (dec) | |
− | + | 0046 – IO element’s value | |
− | + | 43 – IO element ID = 67 (dec) | |
− | + | 06d7 – IO element’s value | |
− | + | 1 – IO element ID = 68 (dec) | |
− | + | 0 – IO element’s value | |
− | + | B5 – IO element ID = 181 (dec) | |
− | + | ||
− | + | 000b – IO element’s value | |
− | + | ||
− | + | B6 – IO element ID = 182 (dec) | |
− | + | ||
+ | 0007 – IO element’s value | ||
+ | |||
+ | 42 – IO element ID = 66 (dec) | ||
+ | |||
+ | 2e9f – IO element’s value | ||
+ | |||
+ | 2 – IO element ID = 24 (dec) | ||
+ | |||
+ | 0 – IO element’s value | ||
+ | |||
+ | cd – IO element ID = 205 (dec) | ||
+ | |||
+ | 3 – IO element’s value | ||
+ | |||
+ | CE – IO element ID = 206 (dec) | ||
+ | |||
+ | 0 – IO element’s value | ||
+ | |||
+ | <span style="background-color: #DF3A01">07</span> – 7 IO elements, which value length is 4 Bytes | ||
+ | |||
+ | C7 – IO element ID = 199 (dec) | ||
+ | |||
+ | 0 – IO element’s value | ||
+ | |||
+ | f1 – IO element ID = 241 (dec) | ||
+ | |||
+ | 0000601a – IO element’s value | ||
+ | |||
+ | 46 – IO element ID = 70 (dec) | ||
+ | |||
+ | 00000134 – IO element’s value | ||
+ | |||
+ | 48 – IO element ID = 72 (dec) | ||
+ | |||
+ | 00000bb8 – IO element’s value | ||
+ | |||
+ | 4 – IO element ID = 73 (dec) | ||
+ | |||
+ | 00000bb8 – IO element’s value | ||
+ | |||
+ | 4a – IO element ID = 74 (dec) | ||
+ | |||
+ | 00000bb8 – IO element’s value | ||
+ | |||
+ | 4c – IO element ID = 76 (dec) | ||
+ | |||
+ | 1 – IO element’s value | ||
+ | |||
+ | <span style="background-color: #DF3A01">02</span> – 2 IO elements, which value length is 8 Bytes | ||
+ | |||
+ | 4e – IO element ID = 78 (dec) | ||
+ | |||
+ | 0 – IO element’s value | ||
+ | |||
+ | cf – IO element ID = 207 (dec) | ||
+ | |||
+ | 0 – IO element’s value | ||
+ | |||
+ | <span style="background-color: #FF0000">01</span> – Number of Data (1 record) | ||
+ | <span style="background-color: #F5DA81">00003fca</span> - CRC-16, 4 Bytes (first 2 are always zeros) | ||
Line 347: | Line 419: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"|AVL data packet header !! style="background: #0052A1; color: white;"|AVL data array !! style="background: #0052A1; color: white;"| CRC |
|- | |- | ||
| Four zero bytes, | | Four zero bytes, | ||
Line 374: | Line 446: | ||
{| class="wikitable " | {| class="wikitable " | ||
|- | |- | ||
− | ! colspan="4" align="center" style="background: | + | ! colspan="4" align="center" style="background: #0052A1; color: white;"|UDP datagram |
|- | |- | ||
| rowspan="4"| UDP channel packet x N | | rowspan="4"| UDP channel packet x N | ||
Line 389: | Line 461: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="2" align="center" style="background: | + | ! colspan="2" align="center" style="background: #0052A1; color: white;"|Not usable byte |
|- | |- | ||
Line 399: | Line 471: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|Acknowledgment packet |
|- | |- | ||
| Packet length || 2 bytes || 0x0003 | | Packet length || 2 bytes || 0x0003 | ||
Line 415: | Line 487: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|AVL data encapsulated in UDP channel packet |
|- | |- | ||
| AVL packet id (1 byte) || Module IMEI || AVL data array | | AVL packet id (1 byte) || Module IMEI || AVL data array | ||
Line 427: | Line 499: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|Server response to AVL data packet |
|- | |- | ||
| AVL packet id (1 byte) ||Number of accepted AVL elements (1 byte) | | AVL packet id (1 byte) ||Number of accepted AVL elements (1 byte) | ||
Line 450: | Line 522: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"|UDP channel header !!style="background: #0052A1; color: white;"| AVL packet header !!style="background: #0052A1; color: white;"| AVL data array |
|- | |- | ||
| Len – 253, | | Len – 253, | ||
Line 472: | Line 544: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| UDP channel header !!style="background: #0052A1; color: white;"| AVL packet acknowledgment |
|- | |- | ||
| Len – 5, | | Len – 5, | ||
Line 497: | Line 569: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"| !!style="background: #0052A1; color: white;"| Codec 8 !!style="background: #0052A1; color: white;"| Codec 8 Extended |
|- | |- | ||
| Codec ID || 0x08 || 0x8E | | Codec ID || 0x08 || 0x8E | ||
Line 526: | Line 598: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"|4 zeros !! style="background: #0052A1; color: white;"|Data field length !! style="background: #0052A1; color: white;"|Codec ID !! style="background: #0052A1; color: white;"|Number of |
Data 1 | Data 1 | ||
− | !! style="background: | + | !! style="background: #0052A1; color: white;"|AVL Data !! style="background: #0052A1; color: white;"|Number of |
Data 2 | Data 2 | ||
− | !! style="background: | + | !! style="background: #0052A1; color: white;"|CRC-16 |
|- | |- | ||
| 4 Bytes || 4 Bytes || 1 Byte || 1 Byte || 38-768 | | 4 Bytes || 4 Bytes || 1 Byte || 1 Byte || 38-768 | ||
Line 553: | Line 625: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Timestamp !!style="background: #0052A1; color: white;"| Timestamp Priority !!style="background: #0052A1; color: white;"| GPS Element !!style="background: #0052A1; color: white;"| IO Element |
|- | |- | ||
| 8 Bytes || 1 Byte || 15 Bytes || 14 - 744 | | 8 Bytes || 1 Byte || 15 Bytes || 14 - 744 | ||
Line 563: | Line 635: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | | style="background: | + | | style="background: #0052A1; color: white;"| 0 || Low |
|- | |- | ||
− | | style="background: | + | | style="background: #0052A1; color: white;"| 1 || High |
|- | |- | ||
− | | style="background: | + | | style="background: #0052A1; color: white;"| 2 || Panic |
|} | |} | ||
<small>Table 5. Priority element values</small> | <small>Table 5. Priority element values</small> | ||
Line 576: | Line 648: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Longitude !!style="background: #0052A1; color: white;"| Latitude !!style="background: #0052A1; color: white;"| Altitude !!style="background: #0052A1; color: white;"| Angle !!style="background: #0052A1; color: white;"| Satellites !!style="background: #0052A1; color: white;"| Speed |
|- | |- | ||
| 4 Bytes || 4 Bytes || 2 Bytes || 2 Bytes || 1 Byte || 2 Bytes | | 4 Bytes || 4 Bytes || 2 Bytes || 2 Bytes || 1 Byte || 2 Bytes | ||
Line 587: | Line 659: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| Event IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N of Total IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N1 of One Byte IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Value || 1 bytes |
|- | |- | ||
| || | | || | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N1'th IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N1'st IO Value || 1 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N2 of Two Byte IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Value || 2 bytes |
|- | |- | ||
| || | | || | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N2'th IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N2'st IO Value || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N4 of Four Byte IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Value || 4 bytes |
|- | |- | ||
| || | | || | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N4'th IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N4'st IO Value || 4 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N2 of Eight Byte IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Value || 8 bytes |
|- | |- | ||
| || | | || | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N8'th IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| N8'st IO Value || 8 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| NX of X Byte IO || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Length || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| 1'st IO Value || defined by length |
|- | |- | ||
| || | | || | ||
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| NX'st IO ID || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| NX'st IO Length || 2 bytes |
|- | |- | ||
− | |style="background: | + | |style="background: #0052A1; color: white;"| NX'st IO Value || defined by length |
|} | |} | ||
<small>Table 7. IO element structure</small> | <small>Table 7. IO element structure</small> | ||
Line 689: | Line 761: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| AVL data packet header !!style="background: #0052A1; color: white;"| AVL data array !!style="background: #0052A1; color: white;"| CRC |
|- | |- | ||
| Four zero bytes, | | Four zero bytes, | ||
Line 799: | Line 871: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| UDP channel header !!style="background: #0052A1; color: white;"| AVL packet header !!style="background: #0052A1; color: white;"| AVL data array |
|- | |- | ||
| Len – 253, | | Len – 253, | ||
Line 820: | Line 892: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| UDP channel header!!style="background: #0052A1; color: white;"| AVL packet acknowledgment |
|- | |- | ||
| Len – 5, | | Len – 5, | ||
Line 884: | Line 956: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Device !!style="background: #0052A1; color: white;"| SMS over GPRS !!style="background: #0052A1; color: white;"| SMS over GPRS via UDP !!style="background: #0052A1; color: white;"| Special Codec12 GPRS commands |
|- | |- | ||
| FM11YX || Available since base firmware 01.11.XX || Since base firmware | | FM11YX || Available since base firmware 01.11.XX || Since base firmware | ||
Line 1,222: | Line 1,294: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Device !!style="background: #0052A1; color: white;"| Availability |
|- | |- | ||
| FM11YX || Available since base firmware 01.18.XX | | FM11YX || Available since base firmware 01.18.XX | ||
Line 1,542: | Line 1,614: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Value !!style="background: #0052A1; color: white;"| Record created |
|- | |- | ||
| 0 || On exit | | 0 || On exit | ||
Line 1,713: | Line 1,785: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Codec type !!style="background: #0052A1; color: white;"| AVL data packet header !!style="background: #0052A1; color: white;"| AVL data array !!style="background: #0052A1; color: white;"| CRC |
|- | |- | ||
| || Four zero bytes, | | || Four zero bytes, | ||
Line 1,743: | Line 1,815: | ||
{| class="wikitable " | {| class="wikitable " | ||
|- | |- | ||
− | ! colspan="4" align="center" style="background: | + | ! colspan="4" align="center" style="background: #0052A1; color: white;"|UDP datagram |
|- | |- | ||
| rowspan="4"| UDP channel packet x N | | rowspan="4"| UDP channel packet x N | ||
Line 1,758: | Line 1,830: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|Not usable byte |
|- | |- | ||
| 1 ||Data packet requiring acknowledgment | | 1 ||Data packet requiring acknowledgment | ||
Line 1,769: | Line 1,841: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|Acknowledgment packet |
|- | |- | ||
| Packet length || 2 bytes || 0x0003 | | Packet length || 2 bytes || 0x0003 | ||
Line 1,785: | Line 1,857: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|AVL data encapsulated in UDP channel packet |
|- | |- | ||
| AVL packet id (1 byte) || Module IMEI || AVL data array | | AVL packet id (1 byte) || Module IMEI || AVL data array | ||
Line 1,799: | Line 1,871: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|Server response to AVL data packet |
|- | |- | ||
| AVL packet id (1 byte) ||Number of accepted AVL elements (1 byte) | | AVL packet id (1 byte) ||Number of accepted AVL elements (1 byte) | ||
Line 1,822: | Line 1,894: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! style="background: | + | ! style="background: #0052A1; color: white;"|UDP channel header !!style="background: #0052A1; color: white;"| AVL packet header !!style="background: #0052A1; color: white;"| AVL data array |
|- | |- | ||
| Len – 253, | | Len – 253, | ||
Line 1,843: | Line 1,915: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| UDP channel header !!style="background: #0052A1; color: white;"| AVL packet acknowledgment |
|- | |- | ||
| Len – 5, | | Len – 5, | ||
Line 1,900: | Line 1,972: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | ! colspan="3" align="center" style="background: | + | ! colspan="3" align="center" style="background: #0052A1; color: white;"|SM data (TP-UD) |
|- | |- | ||
| AVL data array ||IMEI: 8 bytes | | AVL data array ||IMEI: 8 bytes | ||
Line 1,925: | Line 1,997: | ||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||
− | !style="background: | + | !style="background: #0052A1; color: white;"| Byte 1 !!style="background: #0052A1; color: white;"| Byte 2 !!style="background: #0052A1; color: white;"| Byte 3 !!style="background: #0052A1; color: white;"| Bytes 4-… |
|- | |- | ||
| Bits 0-7 || Bits 8-15 || Bits 16-24 || Bits 25-… | | Bits 0-7 || Bits 8-15 || Bits 16-24 || Bits 25-… | ||
Line 1,937: | Line 2,009: | ||
{| class="wikitable " | {| class="wikitable " | ||
|- | |- | ||
− | ! colspan="4" align="center" style="background: | + | ! colspan="4" align="center" style="background: #0052A1; color: white;"|SMS Data Structure |
|- | |- | ||
| || 8 || Codec ID || Codec ID = 4 | | || 8 || Codec ID || Codec ID = 4 | ||
Line 1,952: | Line 2,024: | ||
{| class="wikitable " | {| class="wikitable " | ||
|- | |- | ||
− | ! colspan="4" align="center" style="background: | + | ! colspan="4" align="center" style="background: #0052A1; color: white;"|SMS Data Structure |
|- | |- | ||
|ElementCount * || || GPSDataElement || GPS data elements. | |ElementCount * || || GPSDataElement || GPS data elements. | ||
Line 1,967: | Line 2,039: | ||
{| class="wikitable " | {| class="wikitable " | ||
|- | |- | ||
− | ! colspan="5" align="center" style="background: | + | ! colspan="5" align="center" style="background: #0052A1; color: white;"|GPS Data Element |
|- | |- | ||
| || || Size (bits) || Field || Description | | || || Size (bits) || Field || Description |
Revision as of 20:01, 4 October 2019
Introduction
A codec is a device or computer program for encoding or decoding a digital data stream or signal. Codec is a portmanteau of coder-decoder.
A codec encodes a data stream or a signal for transmission and storage, possibly in encrypted form, and the decoder function reverses the encoding for playback or editing.
Codec ID table
Codec 8 | Codec 8 extended
UDP channel header |
Codec 12 | Codec 13 | Codec 16 |
---|---|---|---|---|
0x08 | 0x8E | 0x0C | 0x0D | 0x10 |
Codec 8
- AVL data packet
Because the smallest information amount that can be written is one bit, there can be some bits left unused when result is byte array. Any unused bits should be left blank.
Below table represents AVL data packet structure.
4 zeros | Data field length | Codec ID | Number of Data 1 | AVL Data | Number of Data 2 | CRC-16 |
---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 byte | 1 byte | 30-147 bytes | 1 byte | 4 bytes |
Number of data – number of encoded data (number of records). Codec ID is constant 08.
Data field length is the length of bytes [codec id, number of data 2]. Number of data 1 should always be equal to number of data 2 byte. CRC-16 is 4 bytes, but first two are zeroes and last two are CRC-16 calculated for [codec id, number of data 2] Minimum AVL packet size is 45 bytes (all IO elements disabled). Maximum AVL packet size for one record is 783 bytes.
- AVL data
Timestamp | Priority | GPS Element | IO element |
---|---|---|---|
8 bytes | 1 byte | 15 bytes | 6-123 |
Timestamp – difference, in milliseconds, between the current time and midnight, January 1, 1970 UTC
- Priority
0 | Low |
1 | High |
2 | Panic |
- GPS Element
Longitude | Latitude | Altitude | Angle | Satellites | Speed |
---|---|---|---|---|---|
4 bytes | 4 bytes | 2 bytes | 2 bytes | 1 bytes | 2 bytes |
X Longitude
Y Latitude1
Altitude In meters above sea level1
Angle In degrees, 0 is north, increasing clock-wise 1
Satellites Number of visible satellites1
Speed in km/h. 0x0000 if GPS data is invalid1
Longitude and latitude are integer values built from degrees, minutes, seconds and milliseconds by formula
d - Degrees
m - Minutes
s - Seconds
ms - Milliseconds
p - Precision (10000000)
If longitude is in west or latitude in south, multiply result by –1. To determine if the coordinate is negative, convert it to binary format and check the very first bit. If it is 0, coordinate is positive, if it is 1, coordinate is negative.
Example:
Received value: 20 9c ca 80 Converted to BIN: 00100000 10011100 11001010 10000000 first bit is 0, which means coordinate is positive Converted to DEC: 547146368 For more information see two‘s complement arithmetics.
- IO Element
Event IO ID | 1 byte |
N of Total IO | 1 byte |
N1 of One Byte IO | 1 byte |
1’st IO ID | 1 byte |
1’st IO Value | 1 byte |
... | |
N1’th IO ID | 1 byte |
N1’th IO Value | 1 byte |
N2 of Two Bytes | 1 byte |
1’st IO ID | 1 byte |
1’st IO Value | 2 bytes |
... | |
N2’th IO ID | 1 byte |
N2’th IO Value | 2 bytes |
N4 of Four Bytes | 1 byte |
1’st IO ID | 1 byte |
1’st IO Value | 4 byte |
... | |
N4’th IO ID | 1 byte |
N4’th IO Value | 4 bytes |
N8 of Eight Bytes | 1 byte |
1’st IO ID | 1 byte |
1’st IO Value | 8 bytes |
... | |
N8’th IO ID | 1 byte |
N8’th IO Value | 8 bytes |
Event IO ID – if data is acquired on event – this field defines which IO property has changed and generated an event. If data cause is not event – the value is 0.
N total number of properties coming with record (N=N1+N2+N4+N8)
N1 number of properties, which length is 1 byte
N2 number of properties, which length is 2 bytes
N4 number of properties, which length is 4 bytes
N8 number of properties, which length is 8 bytes
Example
Received data:
000000000000008c08010000013feb55ff74000f0ea850209a69000094000012000000
1e09010002000300040016014703f0001504c8000c0900730a00460b00501300464306
d7440000b5000bb60007422e9 f180000cd0386ce000107c700000000f10000601a4600
0001344800000bb84900000bb84a00000bb84c00000000024e0000000000000000cf00
000000000000000100003fca
In total 152 Bytes
00000000 4 zeroes, 4 bytes
0000008c data length, 4 bytes
08 – Codec ID
01 Number of Data (1 record) 1’st record data
010000013feb55ff74 – Timestamp in milliseconds (1374042849140)
GMT: Wed, 17 Jul 2013 06:34:09 GMT
00 – Priority
GPS Element
0f0ea850 – Longitude 252618832 = 25,2618832º N
209a6900 – Latitude 546990336 = 54,6990336 º E
0094 – Altitude 148 meters
0000 – Angle 0
12 – 18 Visible satellites
0000 – 0 km/h speed
IO Element
00 – IO element ID of Event generated (in this case when 00 – data generated not on event)
1e – 30 IO elements in record (total)
09 – 9 IO elements, which length is 1 Byte
0 – IO element ID = 01
0 – IO element’s value = 0
02 – IO element ID = 02
0 – IO element’s value = 0
03 – IO element ID = 03
0 – IO element’s value = 0
4 – IO element ID = 04
0 – IO element’s value = 0
16 – IO element ID = 22 (dec)
0 – IO element’s value = 1
47 – IO element ID = 71 (dec)
03 – IO element’s value = 3
F0 – IO element ID = 240 (dec)
0 – IO element’s value = 0
15 – IO element ID = 21 (dec)
04 – IO element’s value = 0
C8 – IO element ID = 200 (dec)
0 – IO element’s value = 0
0c – 12 IO elements, which value length is 2 Bytes
09 – IO element ID = 9 (dec)
0073 – IO element’s value
0a – IO element ID = 10 (dec)
0046 – IO element’s value
0b – IO element ID = 11 (dec)
0050 – IO element’s value
13 – IO element ID = 19 (dec)
0046 – IO element’s value
43 – IO element ID = 67 (dec)
06d7 – IO element’s value
1 – IO element ID = 68 (dec)
0 – IO element’s value
B5 – IO element ID = 181 (dec)
000b – IO element’s value
B6 – IO element ID = 182 (dec)
0007 – IO element’s value
42 – IO element ID = 66 (dec)
2e9f – IO element’s value
2 – IO element ID = 24 (dec)
0 – IO element’s value
cd – IO element ID = 205 (dec)
3 – IO element’s value
CE – IO element ID = 206 (dec)
0 – IO element’s value
07 – 7 IO elements, which value length is 4 Bytes
C7 – IO element ID = 199 (dec)
0 – IO element’s value
f1 – IO element ID = 241 (dec)
0000601a – IO element’s value
46 – IO element ID = 70 (dec)
00000134 – IO element’s value
48 – IO element ID = 72 (dec)
00000bb8 – IO element’s value
4 – IO element ID = 73 (dec)
00000bb8 – IO element’s value
4a – IO element ID = 74 (dec)
00000bb8 – IO element’s value
4c – IO element ID = 76 (dec)
1 – IO element’s value
02 – 2 IO elements, which value length is 8 Bytes
4e – IO element ID = 78 (dec)
0 – IO element’s value
cf – IO element ID = 207 (dec)
0 – IO element’s value
01 – Number of Data (1 record)
00003fca - CRC-16, 4 Bytes (first 2 are always zeros)
- SENDING DATA OVER TCP/IP
First when module connects to server, module sends its IMEI. First comes short identifying number of bytes written and then goes IMEI as text (bytes).
For example IMEI 356307042441013 would be sent as 000f333536333037303432343431303133
First two bytes denote IMEI length. In this case 000F means, that IMEI is 15 bytes long.
After receiving IMEI, server should determine if it would accept data from this module. If yes server will reply to module 01 if not 00. Note that confirmation should be sent as binary packet. I.e. 1 byte 0x01 or 0x00.
Then module starts to send first AVL data packet. After server receives packet and parses it, server must report to module number of data received as integer (four bytes).
If sent data number and reported by server doesn’t match module resends sent data.
Example:
Module connects to server and sends IMEI:
000f333536333037303432343431303133
Server accepts the module:
01
Module sends data packet:
AVL data packet header | AVL data array | CRC |
---|---|---|
Four zero bytes,
‘AVL data array’ length – 254 |
CodecId – 08,
NumberOfData – 2. (Encoded using continuous bit stream. Last byte padded to align to byte boundary) |
CRC of ‘AVL data array’ |
00000000000000FE | 0802...(data elements)...02 | 00008612 |
Server acknowledges data reception (2 data elements): 00000002
- SENDING DATA OVER UDP/IP
- UDP channel protocol
UDP channel is a transport layer protocol above UDP/IP to add reliability to plain UDP/IP using acknowledgment packets. The packet structure is as follows:
UDP datagram | |||
---|---|---|---|
UDP channel packet x N | Example | 2 bytes | Packet length (excluding this field) in big ending byte order |
Packet Id | 2 bytes | Packet id unique for this channel | |
Not usable byte | 1 byte | Not usable byte | |
Packet payload | m bytes | Data payload |
Not usable byte | |
---|---|
1 | Data packet requiring acknowledgment |
Acknowledgment packet should have the same packet id as acknowledged data packet and empty data payload. Acknowledgement should be sent in binary format
Acknowledgment packet | ||
---|---|---|
Packet length | 2 bytes | 0x0003 |
Packet id | 2 bytes | same as in acknowledged packet |
Not usable byte | 1 byte | 0x00 |
- Sending AVL data using UDP channel
AVL data are sent encapsulated in UDP channel packets (Data payload field).
AVL data encapsulated in UDP channel packet | ||
---|---|---|
AVL packet id (1 byte) | Module IMEI | AVL data array |
AVL packet id (1 byte) – id identifying this AVL packet Module IMEI – IMEI of a sending module encoded the same as with TCP AVL data array – array of encoded AVL data
Server response to AVL data packet | ||
---|---|---|
AVL packet id (1 byte) | Number of accepted AVL elements (1 byte) |
AVL packet id (1 byte) – id of received AVL data packet
AVL packet id (1 byte) – id of received AVL data packet
Number of AVL data elements accepted (1 byte) – number of AVL data array entries from the beginning of array, which were accepted by the server.
Scenario: Module sends UDP channel packet with encapsulated AVL data packet. Server sends UDP channel packet with encapsulated response Module validates AVL packet id and Number of accepted AVL elements. If server response with valid AVL packet id is not received within configured timeout, module can retry sending.
Example:
Module sends the data:
UDP channel header | AVL packet header | AVL data array |
---|---|---|
Len – 253,
Id – 0xCAFE, Not usable byte – 00 |
AVL packet id – 0xDD,
IMEI – 1234567890123456 |
CodecId – 08,
NumberOfData – 2. (Encoded using continuous bit stream) |
00FDCAFE01 | DD000F3133343536373839303132333435 | 0802…(data elements)…02 |
Server must respond with acknowledgment:
UDP channel header | AVL packet acknowledgment |
---|---|
Len – 5,
Id – 0xABCD, Not usable byte – 00 |
AVL packet id – 0xDD,
NumberOfAcceptedData – 2 |
0005ABCD01 | DD02 |
Codec 8 Extended
- Protocols overview
Difference between codec8 and codec8 extended
Codec 8 | Codec 8 Extended | |
---|---|---|
Codec ID | 0x08 | 0x8E |
AVL Data IO element length | 1 Byte | 2 Bytes |
AVL Data IO element total IO count length | 1 Byte | 2 Bytes |
AVL Data IO element IO count length | 1 Byte | 2 Bytes |
AVL Data IO element AVL ID length | 1 Byte | 2 Bytes |
Variable size IO elements | Does not include | Includes variable size elements |
Table 2. Codec 8 and 8 Extended differences
Main differences between are shown in above table. AVL data element sizes in codec 8 extended protocol were increased to 2 bytes length and new variable type added. For more detailed description look in codec 8 and codec 8 extended chapters.
- Codec 8 extended protocol sending over TCP
AVL data packet
Below table represents AVL data packet structure.
4 zeros | Data field length | Codec ID | Number of
Data 1 |
AVL Data | Number of
Data 2 |
CRC-16 |
---|---|---|---|---|---|---|
4 Bytes | 4 Bytes | 1 Byte | 1 Byte | 38-768
Bytes |
1 Byte | 4 Bytes |
Table 3. AVL data packet structure
Number of data – number of encoded data (number of records). Codec ID is constant 0x8E.
Data field length is the length of bytes [codec id, number of data 2]. Number of data 1 should always be equal to number of data 2 byte.
CRC-16 is 4 bytes, but first two are zeroes and last two are CRC-16 calculated for [codec id, number of data 2]
Minimum AVL packet size is 53 bytes (all IO elements disabled).
- AVL Data
Timestamp | Timestamp Priority | GPS Element | IO Element |
---|---|---|---|
8 Bytes | 1 Byte | 15 Bytes | 14 - 744 |
Table 4. AVL data structure
- Priority
0 | Low |
1 | High |
2 | Panic |
Table 5. Priority element values
- GPS Element
Longitude | Latitude | Altitude | Angle | Satellites | Speed |
---|---|---|---|---|---|
4 Bytes | 4 Bytes | 2 Bytes | 2 Bytes | 1 Byte | 2 Bytes |
Table 6. GPS element structure
- IO Element
Event IO ID | 2 bytes |
N of Total IO | 2 bytes |
N1 of One Byte IO | 2 bytes |
1'st IO ID | 2 bytes |
1'st IO Value | 1 bytes |
N1'th IO ID | 2 bytes |
N1'st IO Value | 1 bytes |
N2 of Two Byte IO | 2 bytes |
1'st IO ID | 2 bytes |
1'st IO Value | 2 bytes |
N2'th IO ID | 2 bytes |
N2'st IO Value | 2 bytes |
N4 of Four Byte IO | 2 bytes |
1'st IO ID | 2 bytes |
1'st IO Value | 4 bytes |
N4'th IO ID | 2 bytes |
N4'st IO Value | 4 bytes |
N2 of Eight Byte IO | 2 bytes |
1'st IO ID | 2 bytes |
1'st IO Value | 8 bytes |
N8'th IO ID | 2 bytes |
N8'st IO Value | 8 bytes |
NX of X Byte IO | 2 bytes |
1'st IO ID | 2 bytes |
1'st IO Length | 2 bytes |
1'st IO Value | defined by length |
NX'st IO ID | 2 bytes |
NX'st IO Length | 2 bytes |
NX'st IO Value | defined by length |
Table 7. IO element structure
N - total number of properties coming with record (N=N1+N2+N4+N8+NX)
N1 - number of properties, which length is 1 byte
N2 - number of properties, which length is 2 bytes
N4 - number of properties, which length is 4 bytes
N8 - number of properties, which length is 8 bytes
NX - number of properties, which length is defined by length element
- Communication with server
Communication with server is the same as with codec 8 protocol, except in codec8 extended protocol codec id is 0x8E.
Example:
Module connects to server and sends IMEI:
000f333536333037303432343431303133
Server accepts the module:
01
Module sends data packet
AVL data packet header | AVL data array | CRC |
---|---|---|
Four zero bytes,
‘AVL data array’ length – 254 |
Codec Id – 8E, NumberOfData – 02.
(Encoded using continuous bit stream. Last byte padded to align to byte boundary) |
CRC of ‘AVL data array’ |
00000000000000FE | 8E02...(data elements)...02 | 00008612 |
Table 8. IO element structure
Server acknowledges data reception (2 data elements): 00000002
- Example
Received data:
000000000000005F8E010000015FBA40B620000F0DCDE420959D30008A000006000000000006000100EF0 000010011001E000100100000CBDF0002000B000000003544C875000E0000000029BFE4D1000101000011 0000000000000000000000000000000000010000D153
00000000 4 zeros, 4 bytes
0000005F data length, 4 bytes
8E – Codec ID
01- Number of Data (1 record)
1’st record data
0000015FBA40B620 – Timestamp in milliseconds (1510658324000)
GMT: Tuesday, November 14, 2017 11:18:44 AM
00 – Priority
GPS Element
0F0DCDE4 – Longitude 252562916 = 25, 2562916º N
20959D30 – Latitude 546676016 = 54,6676016 º E
008A – Altitude 138 meters
0000 – Angle 0º
06 – 6 Visible satellites
0000 – 0 km/h speed
IO Element
0000 – IO element ID of Event generated (in this case when 0000 – data generated not on event)
0006 – 6 IO elements in record (total)
0001 – 1 IO elements, which length is 1 Byte
00EF – IO element ID = 239 (dec)
00 – IO element’s value
0001 – 1 IO elements, which length is 2 Byte
0011 – IO element ID = 17 (dec )
001E – IO element’s value
0001 – 1 IO elements, which length is 4 Byte
0010 – IO element ID = 16 (dec )
0000CBDF – IO element’s value = 52191 (dec )
0002 – 2 IO elements, which length is 2 Byte
000B – IO element ID = 11 (dec )
000000003544C875 – IO element’s value
000E – IO element ID = 14 (dec )
0000000029BFE4D1 – IO element’s value
01 – Number of Data (1 record)
0000D153 – CRC-16, 4 Bytes (first 2 are always zeros
Codec 8 extended protocol sending over UDP
- AVL data packet
AVL data packet is the same as with codec 8, except codec ID is changed to 0x8E.
Example:
Module sends the data:
UDP channel header | AVL packet header | AVL data array |
---|---|---|
Len – 253,
Id – 0xCAFE, Not usable byte – 00 |
AVL packet id – 0xDD,
IMEI – 1234567890123456 |
Codec Id – 8E, NumberOfData – 02.
(Encoded using continuous bit stream |
00FDCAFE00 | DD000F3133343536373839303132333435 | 8E02…(data elements)…02 |
Table 9. Example packet send to server
Server must respond with acknowledgment:
UDP channel header | AVL packet acknowledgment |
---|---|
Len – 5,
Id – 0xCAFE, Not usable byte – 00 |
AVL packet id -0xDD
Number of Accepted Data -2 |
0005CAFE00 | DD02 |
Table 10. Example packet server response
Example
Server received data:
00A1CAFE001B000F3335363330373034323434313031338E010000013FEBDD19C8000F0E9FF0209A718000690000120000
001E09010002000300040016014703F0001504C8000C0900910A00440B004D130044431555440000B5000BB60005422E
9B180000CD0386CE000107C700000000F10000601A460000013C4800000BB84900000BB84A00000BB84C00000000024E
0000000000000000CF000000000000000001
Data length: 00A1 or 161 Bytes (not counting the first 2 data length bytes)
Packet identification: 0xCAFE 2 bytes
Not usable byte: 00
Packet id: 1B
Imei length: 000F
Actual imei: 333536333037303432343431303133
Codec id: 8E
Number of data: 01
Timestamp: 0000013FEBDD19C8
Priority: 00
GPS data: 0F0E9FF0209A718000690000120000
Codec 12
- About Codec12
Codec12 is original Teltonika protocol for device-server communication over GPRS messages.
Codec12 GPRS commands can be used for sending configuration, debug, digital outputs control commands or other (special purpose command on special firmware versions). This protocol is also necessary for using FMB63/FM63/FM5300/FM5500/FM4200 features like: Garmin, LCD communication, COM TCP Link Mode.
- FM firmware requirements
Supported GPRS commands on each device depend on firmware version. For available GPRS commands on each device, please refer to Table1 FM firmware requirement “SMS over GPRS” means that all standard SMS commands text can be sent to device via GPRS in Codec12 format.
Device | SMS over GPRS | SMS over GPRS via UDP | Special Codec12 GPRS commands |
---|---|---|---|
FM11YX | Available since base firmware 01.11.XX | Since base firmware
1.26.00 |
Available in FM1100 and FM1110 special firmware version 12.XX.XX* |
FM12YX | Available since base firmware 01.03.XX | - | Available in FM12YX special firmware 09.XX.XX* |
FM10YX | Available since base firmware 00.03.XX | - | Available since base firmware 00.06.XX and later versions** |
FM3400 | Available since base firmware 01.01.XX | - | - |
FM36YX | Available in base firmware | Since base firmware 01.06.01 | - |
FM5300 | Available in all firmware versions | - | Available in all firmware versions** |
FM5500 | Available in all firmware versions | - | Available in all firmware versions** |
FM2200 | Not available | - | Special firmware version 07.XX.XX* |
FM4200 | Not available | - | Special firmware version 42.XX.XX* |
FM63YX | Available in all firmware versions | Since base firmware 00.02.19 | Available in all firmware versions** |
FMB9YX | Available in base firmware | Available in base firmware | - |
FMB0YX | Available in base firmware | Available in base firmware | - |
FMB1YX | Available in base firmware | Available in base firmware | - |
FMB6YX | Available in all firmware versions | Since base firmware 00.02.19 | Available in all firmware versions** |
FMA1YX | Available in base firmware | Since base firmware 1.26.00 | Available in special firmware version 12.XX.XX* |
FMA2YX | Available in base firmware | Available in base firmware | - |
Table 1. FM firmware requirement
'*' - supported special commands are listed on special firmware description. Please contact Your Teltonika sales manager for more details;
'**' - supported special commands are listed on device user manual, chapter “GPRS Commands”
- GPRS command session
Following figure shows how GRPS command session is started over TCP.
First FM opens GPRS session and sends AVL data to server (refer FM protocols). Once all records are sent and correct sent data array acknowledgment is received by FM then GPRS commands in Hex can be sent to FM.
The ACK (acknowledge of IMEI from server) is a one byte constant 0x01. The acknowledgement of each data array send from FMXXXX is four bytes integer – number of records received.
Note, that GPRS session should remain active between FM and server, while GPRS commands are sent. For this reason active datalink timeout (global parameters in FMXXXX configuration) is recommended to be set to 259200 (maximum value).
- General Codec12 message structure
The following diagram shows basic structure of Codec 12 messages.
Command message structure
0x00000000 | Data size | 0x0C | Command quantity | 0x05 | Command size | Command | <CR><LF> | Command quantity | CRC |
---|---|---|---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 byte | 1 byte | 1 byte | 4 bytes | X bytes | 0D0A | 1 byte | 4 bytes |
Response message structure
0x00000000 | Data size | 0x0C | Command quantity | 0x06 | Command size | Command | Command quantity | CRC |
---|---|---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 byte | 1 byte | 1 byte | 4 bytes | X bytes | 1 byte | 4 bytes |
Structure explanation:
The message starts with preamble field - four zero bytes. Then goes four bytes data size field (size is calculated from 0x0C field to the second command or response quantity field). Then follows one byte Codec ID field (in Codec 12 it is always 0x0C). Then goes command or response quantity field (it is ignored when parsing the message). After that goes one byte message type field. It can be 0x05 to denote command or 0x06 to denote response. Then follows four bytes command or response size field. After it follows the command or response field itself. After that goes the second command or response quantity field. At the end there’s four bytes CRC field.
Note that difference between commands and responses is message type field: 0x05 means command and 0x06 means response.
The algorithm to calculate CRC is CRC-16 (also known as CRC-16-IBM). All the fields from codec ID to second command/response quantity field are used to calculate CRC. The algorithm of how to calculate
CRC is shown in Figure 3 CRC calculation algorithm.
Figure 3 CRC calculation algorithm
- Command coding table
Command has to be convert from ASCII characters (char) to hexadecimal (Hex)
Table 2 ASCII conversion table
- Command parsing example
Hexadecimal stream of command and answer in this example are given in hexadecimal form. The different fields of message are highlighted in gray and yellow for better readability and command is converted in ASCII for better understanding.
Server command
Hexadecimal stream:
Parsed:
Preamble: 0x00000000
Packet Length: 0x00000018
Codec: 0x0C
Quantity of commands: 0x01
Command type: 0x05
Command size: 0x00000010
Command in ASCII after conversion: #GET DATAORDER<CR><LF>
Quantity of commands: 0x01
CRC: 0x00004990
Device answer
Hexadecimal stream:
Parsed:
Preamble: 0x00000000
Packet Length: 0x00000016
Codec: 0x0C
Quantity of commands: 0x01
Command type: 0x06
Command size: 0x0000000E
Command response is in ASCII after conversion: #DATAORDER=1<CR><LF>
Quantity of commands: 0x01
CRC: 0x00000095
- Codec12 GPRS commands examples
The example commands given in hexadecimal form separated by dollar signs are suitable to be sent from TCP server during data exchange session between FMXXXX device and server (for more details see Figure 1 Command session) The command can be sent from a terminal program such as Hercules (in TCP server mode). Simply write command as explained below into Hercules Send field and click Send button. The TCP server must be listening on specified port (see field Port and button Listen in Figure 4).
Figure 4 Hercules terminal GUI
- SMS over GPRS in Codec12 examples
In case of sending SMS commands over GPRS, do not use SMS logins set during configuration or do not leave empty spaces before command. Devices and firmware versions that support SMS over GPRS are listed in Table1.
Example 1: getinfo
Sending “getinfo” SMS command via GPRS Codec12:
Server requests:
Hexadecimal stream:
00000000000000110C010500000009676574696E666F0D0A010000DA7E
Parsed:
Zero: 0x00000000
Packet Length: 0x00000011
Codec: 0x0C
Quantity of commands: 0x01
Command type: 0x05
Command size: 0x00000009
Command: 0x676574696e666f (HEX of getinfo)
Command end symbol: 0x0D0A
Quantity of commands: 01
CRC: 0x0000DA7E
Device response:
Hexadecimal stream:
00000000000000820C01060000007A494E493A323031312F312F3120303A30205254433A323031312F312F3120373A3333205253543A33204552523A302053523A3134372042523A302043463A312046473A3020464C3A302055543A3020534D533A30204E4F4750533A303A3134204750533A32205341543A302052533A36204D443A302052463A30010000B8AA
Parsed:
Zero: 0x00000000
Packet Length: 0x00000082
Codec: 0C
Quantity of commands: 01
Command type: 06
Command size: 0x0000007A
Command response in ASCII after conversion: INI:2011/1/1 0:0 RTC:2011/1/1 7:33 RST:3 ERR:0 SR:147 BR:0 CF:1 FG:0 FL:0 UT:0 SMS:0 NOGPS:0:14 GPS:2 SAT:0
RS:6 MD:0 RF:0 (without <CR><LF>)
Quantity of commands: 01
CRC: 0x0000B8AA
Example 2: getio
Sending “getio” SMS command via GPRS Codec12:
Server request:
Hexadecimal stream:
000000000000000F0C010500000007676574696F0D0A0100003349
Parsed:
Zero: 0x00000000
Packet Length: 0x0000000F
Codec: 0x0C
Quantity of commands: 0x01
Command type: 0x05
Command size: 0x00000007
Command: 0x676574696f (HEX of getio)
Command end symbol: 0x0D0A
Quantity of commands: 01
CRC: 00003349
Device response:
Hexadecimal stream:
000000000000002C0C0106000000244449313A30204449323A30204449333A302041494E3A323420444F313A3020444F323A30010000F925
Parsed:
Zero: 0x00000000
Packet Length: 0x0000002C
Codec: 0C
Quantity of commands: 01
Command type: 06
Command size: 0x00000024
Command response in ASCII after conversion: DI1:0 DI2:0 DI3:0 AIN:24 DO1:0 DO2:0 (without <CR><LF>)
Quantity of commands: 01
CRC: 0x0000F925
- Special Codec12 commands:
Example 1: #GET VERSION
Server command - #GET VERSION<CR><LF>
Device response - #VERSION=XXXXXXXX<CR><LF>
XXXXXXXX – Device Firmware Version (up to 8 characters)
$00$00$00$00$00$00$00$16$0C$01$05$00$00$00$0E$23$47$45$54$20$56$45$52$53$49$4f$4e$0D$0A$01$00$00$D0$C8
Example 2: #GET NETWORK
Server command - #GET NETWORK<CR><LF>
Device response - #NETWORK=XXXXXX<CR><LF>
XXXXXX – GSM Operator Network [0 - 999999]
$00$00$00$00$00$00$00$16$0C$01$05$00$00$00$0E$23$47$45$54$20$4e$45$54$57$4f$52$4b$0D$0A$01$00$00$ED$61
Codec 13
- About Codec13
Codec13 is original Teltonika protocol for device-server communication over GPRS messages. This protocol is necessary for using following FM features: COM TCP Link Mode (binary/ASCII/binary buffered/ASCII buffered) if message timestamp parameter is enabled in device configuration. Codec13 messages are one way only (Codec 13 is used for FM->Server sending).
- FM firmware requirements
Codec13 availability depends on device and firmware version.
Device | Availability |
---|---|
FM11YX | Available since base firmware 01.18.XX |
FM12YX | Not available |
FM10YX | Not available |
FM3400 | Not available |
FM5300 | Not available |
FM5500 | Not available |
FM2200 | Not available |
FM4200 | Not available |
FM6320 | Available in base |
FMAXX | Not available |
FMBXX | Available in base |
FMB630 | Available in base |
Table 1. FM firmware requirements
- GPRS command session
Following figure shows how GRPS command session is started over TCP.
Figure 1. Command session
First FM opens GPRS session and sends AVL data to server (refer FM protocols).
After all records are sent and correct sent data array acknowledgment is received by FM, it will begin TCP link mode message sending.
TCP Link mode messages do not require ACK.
- General Codec13 message structure
The following diagram shows basic structure of Codec 13 messages.
0x00000000 | Data size | 0x0D | 0x01 | 0x06 | Command size | Timestamp | Payload | 0x01 | CRC |
---|---|---|---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 byte | 1 byte | 1 byte | 4 bytes | 4 bytes | X bytes | 1 byte | 1 byte |
0x06 | Message type filed - 0x06 = packet FM -> Server |
---|
0x01 | Ignored bytes |
---|
Figure 2. Structure of Codec 13 messages
Structure explanation:
- Preamble field - four zero bytes.
- Data size field (size is calculated from:
CID(0x0D = 1 byte)
NOD(0x01 = 1 byte)
CMD_TYPE(0x06 = 1 byte)
CMD_SIZE(variable = 4 bytes, includes size of timestamp field too)
PAYLOAD(variable size, stored in CMD_SIZE field)
NOD(0x01 = 1 byte))
- Codec ID field (in Codec 13 it is always 0x0D).
- NOD field (0x01, it is ignored when parsing the message).
- Message type field. It is always 0x06 since the packet is direction is FM->Server.
- Command size field. Command size field includes size of timestamp too, so it is equal to size of payload + size of timestamp.
- Timestamp field – UNIX timestamp (since 1970/01/01 00:00:00 UTC)
- Payload field – actual received data
- NOD field (0x01, it is ignored when parsing the message)
- CRC field – CRC-16-IBM
The algorithm to calculate CRC is CRC-16 (also known as CRC-16-IBM). All the fields from codec ID to last NOD field are used to calculate CRC. The algorithm of how to calculate CRC is shown in figure 3.
NOTE – Codec13 packets are used only when “Message Timestamp” parameter in RS232 settings is enabled.
Figure 3. CRC calculation algorithm
- Command parsing example
The different fields of message are highlighted in gray and yellow for better readability.
Hexadecimal stream:
Parsed:
Preamble: 0x00000000
Packet Length: 0x0000001C
Codec: 0x0D
NOD: 0x01
Command type: 0x06
Command size: 0x00000014
Timestamp: 1458119714 – 03/16/2016 @ 9:15am UTC
Command: #GET DATAORDER<CR><LF>
NOD: 0x01
CRC: 0x00004990
- FMB630/FM6320/5300/FM5500 and Codec12 functionality
- Garmin
All information is provided in “FMB6 FM6320 FM5300 FM5500 and Garmin development.pdf” document.
- COM TCP Link Mode
All information is provided in “FMB6 FM6320 FM5300 and FM5500 TCP Link mode test instructions.pdf” document.
Codec 14
- About Codec14
Codec14 is original Teltonika protocol for device-server communication over GPRS messages and it is based on Codec12 protocol.
Main difference of Codec14 is that, device will answer to GPRS command if device physical IMEI number matches specified IMEI number in GPRS command.
Codec14 GPRS commands can be used for sending configuration, debug, digital outputs control commands or other (special purpose command on special firmware versions).
- FMB firmware requirements
Implemented in base firmware from FMB.Ver.03.25.04.Rev.00 and newer.
- General Codec14 message structure
The following diagram shows basic structure of Codec14 messages.
- Command message structure
0x00000000 (preamble) | Data size | 0x0E (Codec ID) | Command quantity | 0x05 (Message type) |
Command size + IMEI size (8 bytes) | IMEI (HEX) | Command | Command quantity | CRC |
---|---|---|---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 bytes | 1 bytes | 1 bytes | 4 bytes | 8 bytes | X bytes | 1 bytes | 4 bytes |
- Response message structure
0x00000000 (preamble) | Data size | 0x0E (Codec ID) | Response quantity | 0x06 / 0x11 (Message type) | Response size + IMEI size (8 bytes) | IMEI (HEX) | Response | Response quantity | CRC |
---|---|---|---|---|---|---|---|---|---|
4 bytes | 4 bytes | 1 bytes | 1 bytes | 1 bytes | 4 bytes | 8 bytes | X bytes | 1 bytes | 4 bytes |
- Structure explanation:
- 1. The message starts with preamble field - four zero bytes.
- 2. Then goes four bytes data size field (size is calculated from 0x0E field to the second command or response quantity field).
- 3. Then follows one byte Codec ID field (in Codec 14 it is always 0x0E).
- 4. Then goes command or response quantity field. Response message will contain same quantity field value as request command quantity 1st byte (quantity byte that’s located before message field type byte). 2nd byte (quantity byte that’s located at the end before CRC) will not be parsed but it’s recommended that it should contain same value as 1st byte.
- 5. After that goes one byte message type field. If it’s request command from server it has to contain 0x05. The response type field will contain 0x06 if it’s ACK or 0x11 if it’s nACK.
Explanation: If command message IMEI is equal to actual device IMEI, received command will be executed and response will be sent with ACK (0x06) message type field value. If command message IMEI doesn’t match actual device IMEI, received command won’t be executed and response to server will be sent with nACK (0x11) message type field value.
- 6. Then follows four bytes command or response size field. (make sure that size is IMEI size 8 + actual command size.) Minimal value is 8 because codec14 always contain IMEI and it’s 8 bytes.
- 7. After it follows the IMEI. IMEI is send as HEX value. Example if device IMEI is 123456789123456 then IMEI data field will contain 0x0123456789123456 value.
- 8. After it follows the command or response field itself. If message type field is nACK (0x11) this data field will be empty.
- 9. After that goes the second command or response quantity field.
- 10. At the end there’s four bytes CRC field.
The algorithm to calculate CRC is CRC-16 (also known as CRC-16-IBM). All the fields from codec ID to second command/response quantity field are used to calculate CRC. The algorithm of how to calculate CRC is shown in Figure 3 CRC calculation algorithm.
CRC is shown in Figure 3 CRC calculation algorithm.
- GPRS in Codec14 examples
Sending "getver" SMS command via GPRS Codec14:
Server requests:
Hexadecimal stream:
00000000000000160E01050000000E0352093081452251676574766572010000D2C1
Parsed:
Zero: 0x00000000
Packet Length: 0x00000016
Codec: 0E
Quantity of commands: 0x01
Command type: 0x05
Command size: 0x0000000E
IMEI: 0x0352093081452251 (HEX string)
Command: 0x676574766572 (HEX of getver)
Quantity of commands: 01
CRC: 0x0000D2C1
Device ACK response:
Hexadecimal stream:
00000000000000AB0E0106000000A303520930814522515665723A30332E31382E3
1345F3034204750533A41584E5F352E31305F333333332048773A464D4231323020
4D6F643A313520494D45493A33353230393330383134353232353120496E69743A3
23031382D31312D323220373A313320557074696D653A3137323334204D41433A3
63042444430303136323631205350433A312830292041584C3A30204F42443A3020
424C3A312E362042543A340100007AAE
Parsed:
Zero: 0x00000000
Packet Length: 0x000000AB
Codec: 0x0E
Quantity of commands: 01
Command type: 0x06
Command size: 0x000000A3
IMEI: 0x0352093081452251
Command response in ASCII after conversion:
Ver:03.18.14_04 GPS:AXN_5.10_3333 Hw:FMB120 Mod:15 IMEI:352093081452251
Init:2018-11-22 7:13 Uptime:17234 MAC:60BDD0016261 SPC:1(0) AXL:0 OBD:0 BL:1.6 BT:4
Quantity of commands: 01
CRC: 0x00007AAE
Device nACK response:
Hexadecimal stream:
00000000000000100E011100000008035209308145246801000032AC
Parsed:
Zero: 0x00000000
Packet Length: 0x00000010
Codec: 0x0E
Quantity of commands: 01
Command type: 0x11
Command size: 0x00000008
IMEI: 0x0352093081452468
Quantity of commands: 01
CRC: 0x000032AC
Codec 16
- Description and example
Records to server will be sent as shown in table below. The main difference between CODEC8 and CODEC16 is CODEC ID which will be 0x10 instead of 0x08, AVL ID‘s in AVL data is sent in 2 bytes, instead of 1 byte.
Also new parameter – Generation type is added.
By receiving 0x10 codec ID server must know that AVL data record will be parsed different.
Codec16 is supported from firmware – 00.03.xx and newer. (FMB630/FM63XY) ll AVL ID‘s which are higher than 255 will can be used only in CODEC16 protocol.
Generation type elements:
Value | Record created |
---|---|
0 | On exit |
1 | On Entrance |
2 | On Both |
3 | Reserved |
4 | Hysterisis |
5 | On Change |
6 | Eventual |
7 | Periodical |
Codec16 TCP packet frame:
Header | Data length | Codec ID | NOD1 | AVL DATA | NOD2 | CRC16 |
---|---|---|---|---|---|---|
4 bytes | 4 bytes | 0x10 | 1 byte | Variable | 1 byte | 4 Bytes |
NOD1, NOD2 – number of data (number of packed records)
Codec ID – constant 0x10.
Data length – the length of packet from CodecID to NOD2.
NOD2 should be equal to NOD1.
CRC16 is 4 bytes, but first two are zeroes and last two are CRC-16 calculated for CodecID to NOD2.
Received data:
00000000 4 zeros, 4 bytes
0000009D data length, 4 bytes
10 – Codec ID
02- Number of Data (2 records)
1’st record data
0000013feb55ff74 – Timestamp in milliseconds (1374042849140)
GMT: Wed, 17 Jul 2013 06:34:09 GMT
00 – Priority
GPS Elements
0f0ea850 – Longitude 252618832 = 25,2618832º N
209a6900 – Latitude 546990336 = 54,6990336 º E
00AE – Altitude 174 meters
00B9 – Angle 185º
0B – 11 Visible satellites
0000 – 0 km/h speed
IO Elements
0000 – IO element ID of Event generated (in this case when 0000 – data generated not on event)
07 - Generation type
0A – 10 IO elements in record (total)
05 – 5 IO elements, which length is 1 Byte
0001 – IO element ID = 01
00 – IO element’s value = 0
0002 – IO element ID = 02
00 – IO element’s value = 0
0003 – IO element ID = 03
00 – IO element’s value = 0
0004 – IO element ID = 04
00 – IO element’s value = 0
0120 – IO element ID = 288 (dec)
00 – IO element’s value = 0
02 – 2 IO elements, which value length is 2 Bytes
0018 – IO element ID = 24 (dec)
0000 – IO element’s value
0046 – IO element ID = 70 (dec)
0129 – IO element’s value
02 – 2 IO elements, which value length is 4 Bytes
00C7 – IO element ID = 199 (dec)
00000000 – IO element’s value
0046 – IO element ID = 70 (dec)
00000000 – IO element’s value
01 – 1 IO elements, which value length is 8 Bytes
003E – IO element ID = 62 (dec)
0000000000000000 – IO element’s value
2’st record data
0000015B198C7498000F0DBC502095872F00AE00B90B00000000070A0500010000020
00003000004000120000200180000004601290200C700000000004C0000000001003E00000
00000000000
02 – Number of Data (2 records)
000009A5 - CRC-16, 4 Bytes (first 2 are always zeros)
- Communication with server
First when module connects to server, module sends its IMEI. First comes short identifying number of bytes written and then goes IMEI as text (bytes).
For example IMEI 123456789012345 would be sent as 000f333536333037303432343431303133
First two bytes denote IMEI length. In this case 000F means, that IMEI is 15 bytes long.
After receiving IMEI, server should determine if it would accept data from this module. If yes server will reply to module 01 if not 00. Note that confirmation should be sent as binary packet. I.e. 1 byte 0x01 or 0x00.
Then module starts to send first AVL data packet. After server receives packet and parses it, server must report to module number of data received as integer (four bytes).
If sent data number and reported by server doesn’t match module resends sent data.
Example:
Module connects to server and sends IMEI:
000f333536333037303432343431303133
Server accepts the module:
01
Module sends data packet:
Codec type | AVL data packet header | AVL data array | CRC |
---|---|---|---|
Four zero bytes,
‘AVL data array’ length – 254 |
CodecId – 08 or codec 16,
NumberOfData – 2. (Encoded using continuous bit stream. Last byte padded to align to byte boundary) |
CRC of ‘AVL data array’ | |
Codec8 | 00000000000000FE | 0802...(data elements)...02 | 00008612 |
Codec16 | 00000000000000FE | 1002...(data elements)...02 | 00008612 |
Server acknowledges data reception (2 data elements):
00000002
Sending data over UDP/IP
- UDP channel protocol
UDP channel is a transport layer protocol above UDP/IP to add reliability to plain UDP/IP using acknowledgment packets. The packet structure is as follows:
UDP datagram | |||
---|---|---|---|
UDP channel packet x N | Example | 2 bytes | Packet length (excluding this field) in big ending byte order |
Packet Id | 2 bytes | Packet id unique for this channel | |
Not usable byte | 1 byte | Not usable byte | |
Packet payload | m bytes | Data payload |
Not usable byte | ||
---|---|---|
1 | Data packet requiring acknowledgment |
Acknowledgment packet should have the same packet id as acknowledged data packet and empty data payload.
Acknowledgement should be sent in binary format.
Acknowledgment packet | ||
---|---|---|
Packet length | 2 bytes | 0x0003 |
Packet id | 2 bytes | same as in acknowledged packet |
Not usable byte | 1 byte | 0x00 |
- Sending AVL data using UDP channel
AVL data are sent encapsulated in UDP channel packets (Data payload field).
AVL data encapsulated in UDP channel packet | ||
---|---|---|
AVL packet id (1 byte) | Module IMEI | AVL data array |
AVL packet id (1 byte) – id identifying this AVL packet
Module IMEI – IMEI of a sending module encoded the same as with TCP
AVL data array – array of encoded AVL data
Server response to AVL data packet | ||
---|---|---|
AVL packet id (1 byte) | Number of accepted AVL elements (1 byte) |
AVL packet id (1 byte) – id of received AVL data packet
Number of AVL data elements accepted (1 byte) – number of AVL data array entries from the beginning of array, which were accepted by the server
Scenario:
Module sends UDP channel packet with encapsulated AVL data packet. Server sends UDP channel packet with encapsulated response Module validates AVL packet id and Number of accepted AVL elements. If server response with valid AVL packet id is not received within configured timeout, module can retry sending.
Example
Module sends the data:
UDP channel header | AVL packet header | AVL data array |
---|---|---|
Len – 253,
Id – 0xCAFE, Not usable byte – 00 |
AVL packet id – 0xDD,
IMEI – 1234567890123456 |
CodecId – 08,
NumberOfData – 2. (Encoded using continuous bit stream) |
00FDCAFE01 | DD000F3133343536373839303132333435 | 0802…(data elements)…02 |
Server must respond with acknowledgment:
UDP channel header | AVL packet acknowledgment |
---|---|
Len – 5,
Id – 0xABCD, Not usable byte – 00 |
AVL packet id – 0xDD,
NumberOfAcceptedData – 2 |
0005ABCD01 | DD02 |
- Another example, with all IO id’s enabled
Server received data:
Data length: 00a1 or 161 Bytes (not counting the first 2 data length bytes)
Packet identification: 0xCAFE 2 bytes
Not usable byte : 00
Packet id: 1b
Imei length: 000f
Actual imei: 333536333037303432343431303133
Codec id: 08
Number of data: 01
Timestamp: 0000013febdd19c8
Priority: 00
GPS data: 0f0e9ff0209a718000690000120000
UDP protocol is the same as TCP except message header is 7 bytes, which consist of: data length, packet identification, not usable byte and packet id.
Then goes imei length and imei itself.
And after that goes AVL data.
And at the very end number of data byte. There is no CRC in UDP.
- Sending data using SMS
AVL data or events can be sent encapsulated in binary SMS. TP-DCS field of these SMS should indicate that message contains 8-bit data (for example: TP-DCS can be 0x04).
SM data (TP-UD) | ||
---|---|---|
AVL data array | IMEI: 8 bytes |
AVL data array – array of encoded AVL data
IMEI – IMEI of sending module encoded as a big endian 8-byte long number.
- 24 position SMS data protocol
24-hour SMS is usually sent once every day and contains GPS data of last 24 hours. TP-DCS field of this SMS should indicate that message contains 8-bit data (i.e. TP-DCS can be 0x04).
Note, that 24 position data protocol is used only with subscribed SMS. Event SMS use standard AVL data protocol.
Encoding
To be able to compress 24 GPS data entries into one SMS (140 octets), the data is encoded extensively using bit fields. Data packet can be interpreted as a bit stream, where all bits are numbered as follows:
Byte 1 | Byte 2 | Byte 3 | Bytes 4-… |
---|---|---|---|
Bits 0-7 | Bits 8-15 | Bits 16-24 | Bits 25-… |
Bits in a byte are numbered starting from least significant bit. A field of 25 bits would consist of bits 0 to 24 where 0 is the least significant bit and bit 24 – most significant bit.
Structure
SMS Data Structure | |||
---|---|---|---|
8 | Codec ID | Codec ID = 4 | |
35 | Timestamp | Time corresponding to the first (oldest) GPS data element,
represented in seconds elapsed from 2000.01.01 00:00 EET. | |
5 | ElementCount | Number of GPS data elements |
SMS Data Structure | |||
---|---|---|---|
ElementCount * | GPSDataElement | GPS data elements. | |
Byte-align padding | Padding bits to align to 8-bits boundary
represented in seconds elapsed from 2000.01.01 00:00 EET. | ||
64 | IMEI | IMEI of sending device as 8-byte long integer |
The time of only the first GPS data element is specified in Timestamp field. Time corresponding to each further element can be computed as elementTime = Timestamp + (1 hour * elementNumber).
GPS Data Element | ||||
---|---|---|---|---|
Size (bits) | Field | Description | ||
1 | ValidElement | ValidElement=1 – there is a valid Gps Data Element following,
ValidElement=0 – no element at this position | ||
ValidElement == 1 | ||||
1 | DifferentialCoords | Format of following data. | ||
DifferentialCoords == 1 | ||||
14 | LongitudeDiff | Difference from previous element‘s longitude.
LongitudeDiff = prevLongitude – Longitude + 213 – 1 | ||
14 | LatitudeDiff | Difference from previous element‘s latitude
LatitudeDiff = prevLatitude – Latitude + 213 – 1 | ||
DifferentialCoords == 0 | ||||
21 | Longitude | Longitude= {(LongDegMult + 18 * 108) * (221 –
1)} over {36*108} | ||
20 | Latitude | Latitude=(LatDegMult + 9*108) * (220 – 1) over
{18*108} | ||
8 | Speed | Speed in km/h |
Longitude - longitude field value of GPSDataElement
Latitude - latitude field value of GPSDataElement
LongDegMult - longitude in degrees multiplied by 107 (integer part)
LatDegMult latitude in degrees multiplied by 107 (integer part)
prevLongitude longitude field value of previous GPSDataElemen
prevLatitude latitude field value of previous GPSDataElement
- Decoding GPS position
When decoding GPS data with DifferentialCoords=1, Latitude and Longitude values can be computed as follows: Longitude=prevLongitude – LongitudeDiff + 213 – 1, Latitude=prevLatitude – LatitudeDiff + 213 – 1.
If there were no previous non-differential positions, differential coordinates should be computed assuming prevLongitude=prevLatitude=0.
When Longitude and Latitude values are known, longitude and latitude representation in degrees can be computed as follows:
- SMS Events
When Configured to generate SMS event user will get this SMS upon event
<Year/Month/Day> <Hour:Minute:Second> P:<profile_nr> <SMS Text> Val:<Event Value> Lon:<longitude> Lat:<latitude> Q:<HDOP>
Example:
2016./04/11 12:00:00 P:3 Digital Input 1 Val:1 Lon:51.12258 Lat: 25.7461 Q:0.6
No information available | 0 | Iceland | 1C |
Austria | 1 | Kazakhstan | 1D |
Albania | 2 | Luxembourg | 1E |
Andorra | 3 | Lithuania | 1F |
Armenia | 4 | Latvia | 20 |
Azerbaijan | 5 | Malta | 21 |
Belgium | 6 | Monaco | 22 |
Bulgaria | 7 | Republic of Moldova | 23 |
Bosnia and Herzegovina | 8 | Macedonia | 24 |
Belarus | 9 | Norway | 25 |
Switzerland | 0A | Netherlands | 26 |
Cyprus | 0B | Portugal | 27 |
Czech Republic | 0C | Poland | 28 |
Germany | 0D | Romania | 29 |
Denmark | 0E | San Marino | 2A |
Spain | 0F | Russian Federation | 2B |
Estonia | 10 | Sweden | 2C |
France | 11 | Slovakia | 2D |
Finland | 12 | Slovenia | 2E |
Liechtenstein | 13 | Turkmenistan | 2F |
Faeroe Islands | 14 | Turkey | 30 |
United Kingdom | 15 | Ukraine | 31 |
Georgia | 16 | Vatican City | 32 |
Greece | 17 | Yugoslavia | 33 |
Hungary | 18 | RFU | 34..FC |
Croatia | 19 | European Community | FD |
Italy | 1A | Example | FE |
Ireland | 1B | Rest of the world | FF |