Difference between revisions of "RUT950 Powering Options"
(28 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | { | + | RUT950 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device. |
− | | | + | |
− | | | + | [[Image:Powering options rut950.PNG]] |
− | | | + | |
− | | | + | RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available. |
− | } | + | |
+ | When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot. | ||
+ | |||
+ | [[Image:Powering options poe rut955.PNG]] | ||
+ | |||
+ | {| class="wikitable" | ||
+ | |+ | ||
+ | | style="width: 20px;" | <b>Pin</b> | ||
+ | | style="width: 75px;" | <b>Signal ID</b> | ||
+ | | style="width: 50px;" | <b>T568A Color</b> | ||
+ | | style="width: 50px;" | <b>T568B Color</b> | ||
+ | | style="width: 150px;" | <b>Pins on plug face (socket is reverses)</b> | ||
+ | |- | ||
+ | | 1 | ||
+ | | TX+ | ||
+ | | [[File:Poe white green stripe.png|65px]]<br />white/green | ||
+ | | [[File:Poe solid green.png|65px]]<br />green solid | ||
+ | | rowspan="8" | [[Image:Poe rj45 connector.png]] | ||
+ | |- | ||
+ | | 2 | ||
+ | | TX- | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 3 | ||
+ | | RX+ | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 4 | ||
+ | | | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 5 | ||
+ | | 7 - 30 VDC | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 6 | ||
+ | | RX- | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 7 | ||
+ | | GROUND | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | | 8 | ||
+ | | GROUND | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard. |
Revision as of 13:45, 16 January 2018
Main Page > RUT Routers > RUT950 > RUT950 Manual > RUT950 Powering OptionsRUT950 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device.
RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.
When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.
Pin | Signal ID | T568A Color | T568B Color | Pins on plug face (socket is reverses) |
1 | TX+ | ![]() white/green |
![]() green solid |
![]() |
2 | TX- | |||
3 | RX+ | |||
4 | ||||
5 | 7 - 30 VDC | |||
6 | RX- | |||
7 | GROUND | |||
8 | GROUND |
Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.