|
|
(12 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
| ==Introduction== | | ==Introduction== |
| | | |
− | PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local area network to a remote site through common customer premises equipment, which is the telephone company's term for a modem and similar devices. PPPoE can be used to have an office or building-full of users share a common Digital Subscriber Line (DSL), cable modem, or wireless connection to the Internet. PPPoE combines the Point-to-Point Protocol (PPP), commonly used in dialup connections, with the Ethernet protocol, which supports multiple users in a local area network. The PPP protocol information is encapsulated within an Ethernet frame.
| |
| | | |
| | | |
| This article provides a guide on how to configure '''PPPoE''' server on Mikrotik and how to connect RUTX router, Windows computer to it. | | This article provides a guide on how to configure '''PPPoE''' server on Mikrotik and how to connect RUTX router, Windows computer to it. |
| + | |
| ==Prerequisites== | | ==Prerequisites== |
| | | |
| * Any RUTXxx device. | | * Any RUTXxx device. |
| * One MikroTik router (this guide was created by using MikroTik RB750Gr3). | | * One MikroTik router (this guide was created by using MikroTik RB750Gr3). |
− | * Windows 10 computer. (Mikrotik and RUTXxx configuration will also work with other OS platforms) | + | * Windows 10 computer. |
| * WinBox application (it is used to access the MikroTik router). | | * WinBox application (it is used to access the MikroTik router). |
| | | |
Line 15: |
Line 15: |
| | | |
| [[File:Networking_rutx_configuration_example_mikrotik_pppoe_topology_v1.png|border|class=tlt-border|1100x1100px]] | | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_topology_v1.png|border|class=tlt-border|1100x1100px]] |
− |
| |
− | ==Mikrotik (server) configuration==
| |
− |
| |
− | Connect to MikroTik by using '''WinBox''' application and follow all the further steps to create PPPoE server
| |
− | on LAN port 5.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # Open '''Bridge''' settings.
| |
− | # Navigate to '''Ports''' section.
| |
− | # Select '''ether5'''.
| |
− | # Press '''Delete'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # Open '''IP''' settings.
| |
− | # Select '''Pool''' settings.
| |
− | # Press '''Add''' button.
| |
− | # Create a '''Name''' (anything you want).
| |
− | # Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used 192.168.5.10-192.168.5.20).
| |
− | # Press '''Apply'''.
| |
− | # Press '''Ok'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # Open '''PPP''' settings.
| |
− | # Select '''PPPoE Servers'''.
| |
− | # Press '''Add''' button.
| |
− | # Write '''Service Name''' (anything you want).
| |
− | # Select '''Interface''' (ether5).
| |
− | # Press '''Apply''' button.
| |
− | # Press '''Ok''' button.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_4_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # If you have closed the window, open '''PPP''' settings again.
| |
− | # Select '''Secrets'''.
| |
− | # Press '''Add''' button.
| |
− | # Create a '''Name''' (it will be later used to connect PPPoE server).
| |
− | # Create a '''Password''' (it will be later used to connect PPPoE server).
| |
− | # Press '''Apply'''.
| |
− | # Press '''Ok'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_5_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # If you have closed the window, open '''PPP''' settings again.
| |
− | # Select '''Profiles'''.
| |
− | # Press '''Add'''.
| |
− | # Create a '''Name'''.
| |
− | # Set '''Local Address''' (select your LAN IP-Pool).
| |
− | # Set '''Remote Address''' (select PPPoE IP-Pool which you recently created).
| |
− | # Press '''Apply'''.
| |
− | # Press '''Ok'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_6_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # If you have closed the window, open '''PPP''' settings again.
| |
− | # Select '''PPPoE''' Servers.
| |
− | # Double click the '''PPPoE server''', which you created before.
| |
− | # Change '''Default Profile''' to PPPoE.
| |
− | # Press '''Apply'''.
| |
− | # Press '''Ok'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_7_v1.png|border|class=tlt-border]]
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_8_v1.png|border|class=tlt-border]]
| |
− |
| |
− | # Open '''IP''' settings.
| |
− | # Select '''Firewall'''.
| |
− | # Select '''NAT'''.
| |
− | # Press '''Add'''.
| |
− | # Write '''Src. Address''' (PPPoE server address).
| |
− | # Select '''Action''' (masquarade).
| |
− | # Press '''Apply'''.
| |
− | # Press '''Ok'''.
| |
− |
| |
− | ==RUTXxx client configuration==
| |
− |
| |
− | Access RUTXxx WebUI, go to '''Network > LAN''' and then press '''Edit''' LAN button.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_9_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Change '''Protocol''' to '''PPPoE'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_10_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Then it will ask you '''“Really switch protocol?”''' press '''SWITCH PROTOCOL'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_11_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Write '''Username''' and '''Password''' which you recently created in MikroTik '''Secrets''' settings. And then press '''SAVE & APPLY'''. You will lose connection to your router as soon as you save the settings.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_12_v1.png.png|border|class=tlt-border]]
| |
− |
| |
− | Now plug MikroTik router’s port 5 to any of the RUTXxx LAN ports.
| |
− |
| |
− | ==Windows 10 client configuration==
| |
− |
| |
− | Connect your PC to any of the remaining RUTXxx LAN ports. Go to '''Control Panel > Network and Internet > Network and Sharing Center'''. Then press '''Set up a new connection or network'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_13_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Select '''Connect to the Internet''' and then press '''Next'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_14_v1.png|border|class=tlt-border]]
| |
− |
| |
− | If you alread have internet, select '''Set up a new connection anyway''', if you don’t, skip this step.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_15_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Select '''Broadband (PPPoE)'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_16_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Write '''User name''' and '''Password''' (use the same ones, you used to connect the router) and press '''Connect'''.
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_17_v1.png|border|class=tlt-border]]
| |
− |
| |
− | When it is done connecting it will show this message:
| |
− |
| |
− | [[File:Networking_rutx_configuration_example_mikrotik_pppoe_18_v1.png|border|class=tlt-border]]
| |
− |
| |
− | Check whether you have internet connection (try to access any website).
| |