Template:Networking trb2xx first start hardware installation: Difference between revisions
(Created page with "==Hardware installation== <ol> <li>Unscrew two back panel hex bolts and remove back panel.</li> <li>Insert your SIM card(s) in the SIM socket(s), which are located on...") |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
<li>Unscrew two back panel hex bolts and remove back panel.</li> | <li>Unscrew two back panel hex bolts and remove back panel.</li> | ||
<li>Insert your SIM card(s) in the SIM socket(s), which are located on the bottom side of PCB. Correct SIM card orientation can be seen in the figure below:<br>[[File:{{{file_sim}}}|{{{size_sim}}}px]]</li> | <li>Insert your SIM card(s) in the SIM socket(s), which are located on the bottom side of PCB. Correct SIM card orientation can be seen in the figure below:<br>[[File:{{{file_sim}}}|{{{size_sim}}}px]]</li> | ||
<li>Attach the | <li>Attach the panel and tighten the hex bolts.</li> | ||
<li>Attach | <li>Attach mobile antenna.</li> | ||
<li>Connect the 16 pin terminal block with power adapter to the 16 pin connector located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.</li> | <li>Connect the 16 pin terminal block with power adapter to the 16 pin connector located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.</li> | ||
</ol> | </ol> | ||
Latest revision as of 12:00, 31 March 2020
Hardware installation
- Unscrew two back panel hex bolts and remove back panel.
- Insert your SIM card(s) in the SIM socket(s), which are located on the bottom side of PCB. Correct SIM card orientation can be seen in the figure below:
[[File:{{{file_sim}}}|{{{size_sim}}}px]] - Attach the panel and tighten the hex bolts.
- Attach mobile antenna.
- Connect the 16 pin terminal block with power adapter to the 16 pin connector located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.