Template:Networking device leds: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 44: Line 44:


{{#if: {{{sig|}}}
{{#if: {{{sig|}}}
  | The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up.<br>
  | The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up.
 
In case with {{{name}}}, when all {{{sig_led_num}}} signal strength LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and you can release it now.
In case with {{{name}}}, when all {{{sig_led_num}}} signal strength LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and you can release it now.



Revision as of 08:23, 1 April 2020

This wiki page contains information about {{{name}}} router LEDs and their actions.

Power LED

[[Category:{{{name}}}]]