Template:Networking device leds: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
Line 75: Line 75:
       }}
       }}


///The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up.
The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up.


In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that 5 seconds have passed since you pressed down on the reset button and you can release it now.
In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that 5 seconds have passed since you pressed down on the reset button and you can release it now.

Revision as of 10:00, 1 April 2020

This wiki page contains information about {{{name}}} router LEDs and their actions.

Power LED

The power LED is located on the bottom left corner of the front panel, near the power connector:

[[File:{{{file_power_led}}}|{{{size_power_led}}}px]]

It can perform two different actions:

Action Description
LED turned ON Router is powered up
LED turned OFF Router is not power up




[[Category:{{{name}}}]]