How to use UBUS commands for Bluetooth device scanning / pairing

This page contains instructions on how to use CLI / SSH command UBUS for scanning and pairing new Bluetooth devices on RUTX.

---

The ubus command line tool allows to interact with the ubusd server (with all currently registered services). It's useful for investigating/debugging registered namespaces as well as writing shell scripts. For calling procedures with parameters and returning responses it uses the user-friendly JSON format. Below is an Help output of this command:

...
root@Teltonika-RUTX11:~# ubus
Usage: ubus [<options>] <command> [arguments...]
Options:
-s <socket>:           Set the unix domain socket to connect to
-t <timeout>:          Set the timeout (in seconds) for a command to complete
-S:                    Use simplified output (for scripts)
-v:                    More verbose output
-m <type>:             (for monitor): include a specific message type
                       (can be used more than once)
-M <r|t>               (for monitor): only capture received or transmitted traffic
Commands:
- list [<path>]                        List objects
- call <path> <method> [<message>]     Call an object method
- listen [<path>...]                   Listen for events
- send <type> [<message>]              Send an event
- wait_for <object> [<object>...]      Wait for multiple objects to appear on ubus
- monitor                              Monitor ubus traffic
...

---

Steps to use UBUS for Bluetooth on RUTX:

• Enable Bluetooth in Web UI menu Network -> Bluetooth -> General. Click "Save&Apply".

• Login using CLI and run scan.start command to start Bluetooth scan:

...
ubus call blesem scan.start
...

• To see scan results, use command scan.result:

...
ubus call blesem scan.result
...

The scan takes about 30 seconds. The "scanning": 1 output shows us that scan still in progress. You can use "scan.result" until "scanning": 1. You should see similar output:

...
{ 
      "scanning": 0, 
      "devices": [ 
              { 
                      "name": "RT_T", 
                      "rssi": -72, 
                      "address": "FF:CB:FA:6A:23:CB" 
              } 
      ] 
}
...

Skanavimas vyksta apie 30sek., todėl su „scanning“ rodoma ar vis dar yra vykdomas skanavimas. Šiuo atveju, galima užklausinėti „scan.result“ kol „scanning“ = 1.

Toliau sąrašas prietaisų. Visada bus „rssi“ ir „address“ laukeliai, tačiau nevisada bus „name“ laukelis.

Prietaiso „pair’inimas“ su ubus komanda:

ubus call blesem pair '{"address":"FF:CB:FA:6A:23:CB"}'

Kuri parodys ar pavyko supair’inti,

klaidos atveju bus:

{

      "error": "failed to pair because…." 

}

sėkmingu:

{

      "success": "device successfully paired" 

}

Sėkmingu atveju, automatiškai į blesem config bus įrašoma:

config device option address "FF:CB:FA:6A:23:CB"

Unpair komanda tiesiog ištrins config device sekciją.

Supai’rintų device stat gavimas ubus komanda:

ubus call blesem stat '{"address":"FF:CB:FA:6A:23:CB"}'

Kuri parodys prietaiso stats,

klaidos atveju bus:

{

      "error": "failed to retrieve status because…." 

}

sėkmingu:

{

      "success": "successfully requested status",
      "model": "3901",
      "battery": 98,
      "temperature": "20.34",
      "humidity": 20,
      "firmware": "23",

…. }

• stat komanda kol kas dar nerealizuota, todėl gali keistis.

tuoj pasižiūrėsiu pas sau dar kartą. Bet vakar tai tikrai veikė ir dar su JSON RPC padariau Galėsi irgi į instrukciją įtraukt

{ "jsonrpc": "2.0", "id": 1, "method": "call", "params": [ "727d2dd26ed722a202a3daf2db8fcbcf", "blesem", "scan.result", {} ] }