Difference between revisions of "Template:Networking rutos manual leds"
(55 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
− | This page contains information the different types of LEDs and their behaviour on a {{{name}}} | + | This page contains information the different types of LEDs and their behaviour on a {{{name}}} router. |
− | + | ||
==Power LED== | ==Power LED== | ||
− | |||
− | |||
− | [[File | + | The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector. |
+ | |||
+ | [[File:{{{file_power}}}]] | ||
+ | |||
+ | It indicates whether the router is powered on or not | ||
− | |||
− | |||
<table class="nd-othertables_3"> | <table class="nd-othertables_3"> | ||
<tr> | <tr> | ||
<th width=500>State</th> | <th width=500>State</th> | ||
<th width=500>Description</th> | <th width=500>Description</th> | ||
− | </tr> | + | </tr> |
<tr> | <tr> | ||
<td>LED turned on</td> | <td>LED turned on</td> | ||
− | <td> | + | <td>Router is powered on</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>LED turned off</td> | <td>LED turned off</td> | ||
− | <td> | + | <td>Router is not powered on</td> |
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
− | + | </table> | |
− | + | ||
− | + | ==WiFi band LEDs== | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the | + | The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the router, to the left of the Ethernet ports. |
− | [[File: | + | [[File:{{{file_wifi}}}]] |
They display whether a WiFi Access Point (AP) is active on a specific band. | They display whether a WiFi Access Point (AP) is active on a specific band. | ||
Line 52: | Line 38: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td>2.4 LED turned on | + | <td>2.4 LED turned on</td> |
− | <td>At least one 2.4 GHz Access Point is running | + | <td>At least one 2.4 GHz Access Point is running</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>2.4 LED turned off</td> | <td>2.4 LED turned off</td> | ||
− | <td>No 2.4 GHz Access Points are running | + | <td>No 2.4 GHz Access Points are running</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>5 LED turned on</td> | <td>5 LED turned on</td> | ||
− | <td>At least one 5 GHz Access Point is running | + | <td>At least one 5 GHz Access Point is running</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>5 LED turned off</td> | <td>5 LED turned off</td> | ||
− | <td>No 5 GHz Access Points are running | + | <td>No 5 GHz Access Points are running</td> |
</tr> | </tr> | ||
− | </table> | + | </table> |
+ | |||
+ | ==WAN type LEDs== | ||
The <b>WAN type LEDs</b> are located at the top-right of the front panel. | The <b>WAN type LEDs</b> are located at the top-right of the front panel. | ||
− | [[File: | + | [[File:{{{file_wan}}}]] |
They indicate which type of Internet connection is currently active. | They indicate which type of Internet connection is currently active. | ||
Line 95: | Line 83: | ||
<td>SIM2 LED off</td> | <td>SIM2 LED off</td> | ||
<td>A mobile data connection on SIM2 is inactive.</td> | <td>A mobile data connection on SIM2 is inactive.</td> | ||
− | </tr> | + | </tr> |
<tr> | <tr> | ||
<td>WiFi LED on</td> | <td>WiFi LED on</td> | ||
Line 103: | Line 91: | ||
<td>WiFi LED off</td> | <td>WiFi LED off</td> | ||
<td>A WiFi data connection (WiFi WAN) is inactive.</td> | <td>A WiFi data connection (WiFi WAN) is inactive.</td> | ||
− | </tr> | + | </tr> |
<tr> | <tr> | ||
<td>ETH LED on</td> | <td>ETH LED on</td> | ||
Line 113: | Line 101: | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
− | + | ==Ethernet port LEDs== | |
− | |||
− | + | There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>. | |
− | + | [[File:{{{file_ethernet}}}]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[File: | ||
They provide information on the current states of the Ethernet ports. Each port has two LEDs: | They provide information on the current states of the Ethernet ports. Each port has two LEDs: | ||
Line 150: | Line 112: | ||
<ul> | <ul> | ||
<li><span style="color: orange;"><b>Orange</b></span> - 10/100 Mbps connection</li> | <li><span style="color: orange;"><b>Orange</b></span> - 10/100 Mbps connection</li> | ||
− | <li><span style="color: green;"><b>Green</b></span> | + | <li><span style="color: green;"><b>Green</b></span> - 1000 Mbps connection</li> |
</ul> | </ul> | ||
Below is an explanation on the behaviours of green and orange LEDs. | Below is an explanation on the behaviours of green and orange LEDs. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<table class="nd-othertables_3"> | <table class="nd-othertables_3"> | ||
Line 204: | Line 124: | ||
<tr> | <tr> | ||
<td>LED on</td> | <td>LED on</td> | ||
− | <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred) | + | <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred)</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>LED off</td> | <td>LED off</td> | ||
− | <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)) | + | <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card))</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>LED blinking</td> | <td>LED blinking</td> | ||
− | <td>Connection established and data is being transferred over this port | + | <td>Connection established and data is being transferred over this port</td> |
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
− | |||
− | |||
− | + | ==Mobile network type LEDs== | |
− | + | The <b>mobile network type LEDs</b> are located just above the first SIM holder. | |
− | + | [[File:{{{file_net_type}}}]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | They display which type of Internet connection is currently active. | |
− | + | <table class="nd-othertables_3"> | |
− | |||
− | <table class="nd- | ||
<tr> | <tr> | ||
− | <th | + | <th width=500>Action</th> |
− | <th | + | <th width=500>Description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td></td> |
− | <td> | + | <td></td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td></td> |
− | + | <td></td> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | + | ==Mobile signal strength indication LEDs== | |
− | + | The <b>mobile signal strength indication LEDs</b> are located just above the second SIM holder. | |
− | + | [[File:{{{file_signal}}}]] | |
− | + | The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<table class="nd-othertables_3"> | <table class="nd-othertables_3"> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<tr> | <tr> | ||
<th width=500>No. of lit up LEDS</th> | <th width=500>No. of lit up LEDS</th> | ||
Line 423: | Line 197: | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
[[Category:{{{name}}} Manual]] | [[Category:{{{name}}} Manual]] |
Revision as of 22:21, 27 April 2020
This page contains information the different types of LEDs and their behaviour on a {{{name}}} router.
Power LED
The power LED is located on the bottom left corner of the front panel, just under the power connector.
[[File:{{{file_power}}}]]
It indicates whether the router is powered on or not
State | Description |
---|---|
LED turned on | Router is powered on |
LED turned off | Router is not powered on |
WiFi band LEDs
The WiFi band LEDs are located at the bottom of the front panel of the router, to the left of the Ethernet ports.
[[File:{{{file_wifi}}}]]
They display whether a WiFi Access Point (AP) is active on a specific band.
State | Description |
---|---|
2.4 LED turned on | At least one 2.4 GHz Access Point is running |
2.4 LED turned off | No 2.4 GHz Access Points are running |
5 LED turned on | At least one 5 GHz Access Point is running |
5 LED turned off | No 5 GHz Access Points are running |
WAN type LEDs
The WAN type LEDs are located at the top-right of the front panel.
[[File:{{{file_wan}}}]]
They indicate which type of Internet connection is currently active.
State | Description |
---|---|
SIM1 LED on | A mobile data connection on SIM1 is active. |
SIM1 LED off | A mobile data connection on SIM1 is inactive. |
SIM2 LED on | A mobile data connection on SIM2 is active. |
SIM2 LED off | A mobile data connection on SIM2 is inactive. |
WiFi LED on | A WiFi data connection (WiFi WAN) is active. |
WiFi LED off | A WiFi data connection (WiFi WAN) is inactive. |
ETH LED on | An Ethernet data connection (wired WAN) is active. |
ETH LED off | An Ethernet data connection (wired WAN) is inactive. |
Ethernet port LEDs
There are two LEDs located at the top of each Ethernet port.
[[File:{{{file_ethernet}}}]]
They provide information on the current states of the Ethernet ports. Each port has two LEDs:
- Orange - 10/100 Mbps connection
- Green - 1000 Mbps connection
Below is an explanation on the behaviours of green and orange LEDs.
State | Description |
---|---|
LED on | A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred) |
LED off | No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)) |
LED blinking | Connection established and data is being transferred over this port |
Mobile network type LEDs
The mobile network type LEDs are located just above the first SIM holder.
[[File:{{{file_net_type}}}]]
They display which type of Internet connection is currently active.
Action | Description |
---|---|
Mobile signal strength indication LEDs
The mobile signal strength indication LEDs are located just above the second SIM holder.
[[File:{{{file_signal}}}]]
The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card.
No. of lit up LEDS | Signal strength |
---|---|
0 | ≤ -111 dBm |
1 | -110 dBm to -97 dBm |
2 | -96 dBm to -82 dBm |
3 | -81 dBm -67 dBm |
4 | -66 dBm to -52 dBm |
5 | ≥ -51 dBm |
[[Category:{{{name}}} Manual]]