Difference between revisions of "Template:Networking rutos manual wan"
(112 intermediate revisions by 10 users not shown) | |||
Line 1: | Line 1: | ||
− | {{Template: | + | {{Template:Networking_rutos_manual_fw_disclosure |
− | | | + | | fw_version = {{{series}}}_R_00.02.03 |
− | + | | series = {{{series}}} | |
− | |||
− | |||
− | |||
− | |||
}} | }} | ||
− | + | ||
− | |||
==Summary== | ==Summary== | ||
− | The <b>WAN</b> page is used to to set up WAN network interfaces | + | The <b>WAN</b> page is used to to set up network interfaces WAN network interfaces which are |
This manual page provides an overview of the WAN windows in {{{name}}} devices. | This manual page provides an overview of the WAN windows in {{{name}}} devices. | ||
− | {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer | + | {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer}} |
− | |||
− | }} | ||
==WAN== | ==WAN== | ||
− | The <b>WAN</b> section displays | + | The <b>WAN</b> section displays interfaces currently existing on this device. |
− | + | {{#ifeq: {{{series}}} | RUTX | |
− | + | | [[File:Networking_rutos_manual_wan_modem_{{{modem}}}_v1.png|border|class=tlt-border]] | |
− | + | | [[File:Networking_{{lc:{{{series}}}}}_manual_wan_v1.png|border|class=tlt-border]] | |
− | + | }} | |
− | |||
− | |||
− | |||
− | |||
− | |||
==Interface configuration== | ==Interface configuration== | ||
− | This section provides information on <b> | + | This section provides information on <b>WAN interface configuration</b>. There {{#ifeq:{{{eth}}}|{{{modem}}}|are two types of WAN interfaces|is one type of WAN interface}} on the device: |
<ul> | <ul> | ||
− | {{#ifeq: {{{ | + | {{#ifeq: {{{eth}}} | 1 |
− | {{#ifeq: {{{ | + | |<li><b>Ethernet WAN</b></li> |
− | </ul> | + | |}}{{#ifeq: {{{modem}}} | 1 |
− | + | |<li><b>Mobile WAN</b></li> | |
− | + | |}} | |
+ | </ul>{{#ifeq:{{{eth}}}|{{{modem}}}|Each supports different types of protocols and setups, which are described in the sections below.|}} | ||
+ | To begin configuring an interface, click the 'Edit' button on the right side of the interface: | ||
− | + | {{#ifeq: {{{series}}} | RUTX | |
− | + | | [[File:Networking_rutos_manual_wan_begin_to_edit_v1.png]] | |
− | + | | [[File:Networking_trb_manual_wan_begin_to_edit_v1.png]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | {{#ifeq: {{{ | ||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
}} | }} | ||
+ | {{#ifeq: {{{eth}}} | 1 | | ||
+ | ===Wired WAN=== | ||
+ | ---- | ||
+ | This section covers all parameters directly related to a <b>wired (Ethernet) WAN</b> interface. | ||
− | + | ====General Setup==== | |
− | |||
− | |||
− | |||
− | ===General Setup=== | ||
---- | ---- | ||
− | The <b>General Setup</b> section is used to configure the protocol | + | The <b>General Setup</b> section is used to configure the protocol and all the different parameters that go along with each protocol. This section is different for each protocol. |
− | ====General | + | =====General Setup: Static address===== |
---- | ---- | ||
− | The <b>static</b> protocol uses a predefined manual configuration instead of obtaining parameters automatically via a DHCP lease. | + | The <b>static address</b> protocol uses a predefined manual configuration instead of obtaining parameters automatically via a DHCP lease. |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_general_setup_static_address_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 96: | Line 58: | ||
<th>Value</th> | <th>Value</th> | ||
<th>Description</th> | <th>Description</th> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 109: | Line 66: | ||
<tr> | <tr> | ||
<td>IPv4 netmask</td> | <td>IPv4 netmask</td> | ||
− | <td>netmask; default: <b> | + | <td>netmask; default: <b>none</b></td> |
<td>The IPv4 netmask of this interface. A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.</td> | <td>The IPv4 netmask of this interface. A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.</td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 129: | Line 76: | ||
</table> | </table> | ||
− | ====General | + | =====General Setup: DHCP client===== |
---- | ---- | ||
− | The <b>DHCP</b> protocol is used to set up an interface which obtains its configuration parameters automatically via a DHCP lease. | + | The <b>DHCP client</b> protocol is used to set up an interface which obtains its configuration parameters automatically via a DHCP lease. |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_general_setup_dhcp_client_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 140: | Line 87: | ||
<th>Value</th> | <th>Value</th> | ||
<th>Description</th> | <th>Description</th> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 153: | Line 95: | ||
</table> | </table> | ||
− | ====General | + | =====General Setup: DHCPv6 client===== |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
---- | ---- | ||
− | + | The <b>DHCPv6 client</b> protocol is used to set up an IPv6 interface which obtains its configuration parameters automatically via a DHCP lease. | |
− | + | [[File:Networking_rutos_manual_wan_wan_configuration_general_setup_dhcpv6_client_v1.png|border|class=tlt-border]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | [[File: | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 378: | Line 106: | ||
<th>Value</th> | <th>Value</th> | ||
<th>Description</th> | <th>Description</th> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 539: | Line 119: | ||
</table> | </table> | ||
− | ==== | + | =====General Setup: PPPoE===== |
---- | ---- | ||
− | + | The <b>PPPoE</b> protocol is used to set up a PPP (Point-to-Point Protocol) connection over the Ethernet port{{#ifeq:{{{series}}}|TRB14X| (in this case: an Ethernet connection simulated over the USB port)|}}. | |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_general_setup_pppoe_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
<th>Field</th> | <th>Field</th> | ||
− | + | <th>Value</th> | |
− | + | <th>Description</th> | |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | + | <td>PAP/CHAP username</td> | |
− | + | <td>string; default: <b>none</b></td> | |
− | + | <td>Username used in PAP/CHAP authentication.</td> | |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>PAP/CHAP password</td> |
− | <td> | + | <td>string; default: <b>none</b></td> |
− | <td> | + | <td>Password used in PAP/CHAP authentication.</td> |
</tr> | </tr> | ||
</table> | </table> | ||
− | ===Advanced Settings=== | + | ====Advanced Settings==== |
---- | ---- | ||
The <b>Advanced Settings</b> section is used to set up some of the more specific and less frequently used interface parameters. This section is different for each protocol. | The <b>Advanced Settings</b> section is used to set up some of the more specific and less frequently used interface parameters. This section is different for each protocol. | ||
− | ====Advanced Settings: Static==== | + | =====Advanced Settings: Static address===== |
---- | ---- | ||
<b>Advanced Settings</b> information for <b>Static</b> protocol is provided in the table below. | <b>Advanced Settings</b> information for <b>Static</b> protocol is provided in the table below. | ||
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_static_address_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 578: | Line 158: | ||
<th>Value</th> | <th>Value</th> | ||
<th>Description</th> | <th>Description</th> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MAC address</td> | <td>Override MAC address</td> | ||
<td>mac; default: <b>none</b></td> | <td>mac; default: <b>none</b></td> | ||
− | <td>When set, uses a user-defined MAC address for the interface | + | <td>When set, uses a user-defined MAC address for the interface.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MTU</td> | <td>Override MTU</td> | ||
<td>integer [1..9200]; default: <b>none</b></td> | <td>integer [1..9200]; default: <b>none</b></td> | ||
− | <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction. | + | <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Use gateway metric</td> |
− | <td>integer | + | <td>integer; default: <b>none</b></td> |
− | <td> | + | <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</table> | </table> | ||
− | ====Advanced Settings: DHCP==== | + | |
+ | =====Advanced Settings: DHCP client===== | ||
---- | ---- | ||
− | <b>Advanced Settings</b> information for < | + | <b>Advanced Settings</b> information for <i>DHCP</i> protocol is provided in the table below. |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_dhcp_client_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 655: | Line 190: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Use DNS servers advertised by peer</td> |
− | <td> | + | <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td> |
− | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td> | |
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td>Use | + | <td><span style="color: red;">Use custom DNS servers</span></td> |
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | ||
− | <td> | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 673: | Line 203: | ||
<td>integer; default: <b>none</b></td> | <td>integer; default: <b>none</b></td> | ||
<td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td> | <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MAC address</td> | <td>Override MAC address</td> | ||
<td>mac; default: <b>none</b></td> | <td>mac; default: <b>none</b></td> | ||
− | <td> | + | <td>Override MAC address of the WAN interface. For example, your ISP (Internet Service Provider) gives you a static IP address and it might also bind it to your computers MAC address (i.e., that IP will only work with your computer but not with your device). In this field you can enter your computer’s MAC address and fool the gateway in to thinking that it is communicating with your computer.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MTU</td> | <td>Override MTU</td> | ||
<td>integer [1..9200]; default: <b>none</b></td> | <td>integer [1..9200]; default: <b>none</b></td> | ||
− | <td>Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction | + | <td>Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
</table> | </table> | ||
− | ====Advanced Settings: DHCPv6==== | + | =====Advanced Settings: DHCPv6 client===== |
---- | ---- | ||
− | <b>Advanced Settings</b> information for < | + | <b>Advanced Settings</b> information for <i>DHCPv6</i> protocol is provided in the table below. |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_dhcpv6_client_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 723: | Line 229: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Use DNS servers advertised by peer</td> |
− | <td>off <nowiki>|</nowiki> on; default: <b> | + | <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td> |
− | <td>Specifies whether | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td>Use | + | <td><span style="color: red;">Use custom DNS servers</span></td> |
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | ||
− | <td> | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MAC address</td> | <td>Override MAC address</td> | ||
<td>mac; default: <b>none</b></td> | <td>mac; default: <b>none</b></td> | ||
− | <td>When set, uses a user-defined MAC address for the interface | + | <td>When set, uses a user-defined MAC address for the interface.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Override MTU</td> | <td>Override MTU</td> | ||
<td>integer [1..9200]; default: <b>none</b></td> | <td>integer [1..9200]; default: <b>none</b></td> | ||
− | <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction | + | <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
<tr> | <tr> | ||
− | |||
− | |||
− | |||
− | |||
</table> | </table> | ||
− | ====Advanced Settings: PPPoE==== | + | =====Advanced Settings: PPPoE===== |
---- | ---- | ||
− | <b>Advanced Settings</b> information for < | + | <b>Advanced Settings</b> information for <i>PPPoE</i> protocol is provided in the table below. |
− | [[File: | + | [[File:Networking_rutos_manual_wan_wan_configuration_advanced_settings_pppoe_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 781: | Line 263: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Obtain IPv6 address</td> |
− | <td> | + | <td>Automatic <nowiki>|</nowiki> Disabled <nowiki>|</nowiki> Manual; default: <b>Automatic</b></td> |
− | <td> | + | <td>Defines behaviour for obtaining an IPv6 address.</td> |
</tr> | </tr> | ||
− | |||
<tr> | <tr> | ||
− | <td>Use | + | <td>Use DNS servers advertised by peer</td> |
− | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | + | <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td> |
− | <td> | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td><span style="color: red;">Use custom DNS servers</span></td> |
− | + | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | |
− | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td> | |
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 835: | Line 281: | ||
<td>integer [1..1500]; default: <b>none</b></td> | <td>integer [1..1500]; default: <b>none</b></td> | ||
<td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td> | <td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
</table> | </table> | ||
− | + | ====DHCP Server: IPv6 Settings==== | |
− | ==== | ||
---- | ---- | ||
− | <b> | + | Refer to the table below for information on the <b>IPv6 Settings</b> section. |
− | + | [[File:Networking_rutos_manual_wan_wan_configuration_dhcp_server_ipv6_settings_v1.png|border|class=tlt-border]] | |
− | |||
− | |||
− | |||
− | [[File: | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 861: | Line 297: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Router Advertisement-Service</td> |
− | <td> | + | <td>disabled <nowiki>|</nowiki> relay mode <nowiki>|</nowiki> server mode <nowiki>|</nowiki> hybrid mode; default: <b>Disabled</b></td> |
− | + | <td>Specifies whether router advertisements should be enabled (server mode), relayed or disabled. </td> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
− | |||
<tr> | <tr> | ||
− | <td> | + | <td>DHCPv6-Service</td> |
− | <td> | + | <td>disabled <nowiki>|</nowiki> relay mode <nowiki>|</nowiki> server mode <nowiki>|</nowiki> hybrid mode; default: <b>Disabled</b></td> |
− | <td> | + | <td>Specifies whether DHCPv6 server should be enabled (server), relayed (relay) or disabled (disabled).</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>NDP Proxy</td> |
− | <td> | + | <td>disabled <nowiki>|</nowiki> relay mode <nowiki>|</nowiki> hybrid mode; default: <b>Disabled</b></td> |
− | <td>Specifies | + | <td>Specifies whether NDP should be relayed or disabled.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Announced DNS server</td> |
− | <td> | + | <td>ip; default: <b>none</b></td> |
− | <td> | + | <td>Supplements DHCP-assigned DNS server entries with ones specified in this field.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Announced DNS domains</td> |
− | <td> | + | <td>ip; default: <b>none</b></td> |
− | <td> | + | <td>DNS domain handed out to DHCP clients.</td> |
</tr> | </tr> | ||
</table>|}} | </table>|}} | ||
+ | {{#ifeq: {{{modem}}} | 1 | | ||
+ | ===Mobile WAN=== | ||
+ | ---- | ||
+ | This section covers all parameters directly related to a <b>mobile WAN</b> interface. | ||
− | === | + | ====General Setup: Mobile==== |
---- | ---- | ||
− | The <b> | + | The <b>General Setup</b> section is used to configure the main parameters of a mobile WAN connection. |
− | [[File: | + | {{#ifeq: {{{series}}} | TRB14X |
+ | | [[File:Networking_rutos_manual_wan_mobile_configuration_general_setup_v1.png|border|class=tlt-border]] | ||
+ | | [[File:Networking_trb14x_manual_wan_mobile_configuration_general_setup_v1.png|border|class=tlt-border]] | ||
+ | }} | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
<th>Field</th> | <th>Field</th> | ||
− | + | <th>Value</th> | |
− | + | <th>Description</th> | |
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Mode</td> | ||
+ | <td>NAT <nowiki>|</nowiki> Bridge<span class="asterisk">*</span>; default: <b>NAT</b></td> | ||
+ | <td>Mobile connection operating mode. | ||
+ | <ul> | ||
+ | <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li> | ||
+ | <li><span style="color: red;"><b>Bridge</b></span> - bridges the LTE data connection with LAN. In this mode the device relay the IP address received from the ISP to another LAN device (e.g., computer). Using Bridge mode will disable most of the device’s capabilities and you will only be able to access your device's WebUI with a [[Setting_up_a_Static_IP_address_on_a_Windows_10_PC|static IP configuration]].</li> | ||
+ | </ul> | ||
+ | </td> | ||
</tr> | </tr> | ||
+ | {{#ifeq: {{{series}}} | TRB14X | ||
+ | | | ||
+ | | <tr> | ||
+ | <td>PDP Type</td> | ||
+ | <td>IPv4 <nowiki>|</nowiki> IPv6 <nowiki>|</nowiki> IPv4/IPv6; default: <b>IPv4</b></td> | ||
+ | <td>Specifies what of address will be requested from the operator.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>SIM</td> | ||
+ | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | ||
+ | <td>The Auto APN feature scans an internal Android APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database.</td> | ||
+ | </tr>}} | ||
<tr> | <tr> | ||
− | + | <td>Auto APN</td> | |
− | <td>off <nowiki>|</nowiki | + | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> |
− | <td> | + | <td>The Auto APN feature scans an internal Android APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database. |
+ | </td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>APN / Custom APN</td> |
− | <td>network | + | <td>string; default: <b>none</b></td> |
− | <td> | + | <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings: |
+ | <ul> | ||
+ | <li>rac;</li> | ||
+ | <li>lac;</li> | ||
+ | <li>sgsn;</li> | ||
+ | <li>rnc;</li> | ||
+ | </ul>it cannot end in: | ||
+ | <ul> | ||
+ | <li>.gprs;</li> | ||
+ | </ul>and it cannot contain the asterisk symbol (<b>*</b>). | ||
+ | </td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">MAC Address</span></td> | ||
+ | <td>mac; default: <b>none</b></td> | ||
+ | <td>Specifies the MAC address of the device that will receive the mobile interface's IP address in Bridge mode.<br><b>Note:</b> this field only becomes visible when using Bridge mode.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
+ | <font size="-1"> | ||
+ | <span class="asterisk">*</span> In <b>Bridge</b> mode the device assigns its WAN IP address to another device (identified by its MAC address}. It is used instead of Network Address Translation (NAT) in order to make this device "transparent" in the communication process. | ||
− | === | + | <b>Important</b>: using Bridge mode will disable most of the device’s other capabilities. |
+ | </font> | ||
+ | |||
+ | ====Advanced Settings: Mobile==== | ||
---- | ---- | ||
− | + | <b>Advanced Settings</b> information for <i>mobile</i> WAN is provided in the table below. | |
− | + | [[File:Networking_rutos_manual_wan_mobile_configuration_advanced_settings_v1.png|border|class=tlt-border]] | |
− | |||
− | [[File: | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 933: | Line 410: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Use DNS servers advertised by peer</td> |
− | <td> | + | <td><span style="color: red;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td> |
− | <td> | + | <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td> |
+ | </tr> | ||
+ | <tr> | ||
+ | <td><span style="color: red;">Use custom DNS servers</span></td> | ||
+ | <td>off <nowiki>|</nowiki> on; default: <b>on</b></td> | ||
+ | <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Use gateway metric</td> | ||
+ | <td>integer; default: <b>none</b></td> | ||
+ | <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Override MTU</td> | ||
+ | <td>integer [1..9200]; default: <b>none</b></td> | ||
+ | <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | + | ====Mobile Data Limit==== | |
− | ===Mobile Data Limit=== | ||
---- | ---- | ||
The <b>Mobile Data Limit</b> section provides you with the possibility to set data usage limits for your mobile network interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges. | The <b>Mobile Data Limit</b> section provides you with the possibility to set data usage limits for your mobile network interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges. | ||
− | < | + | <u>In order to view the Mobile Data Limit section, the interface <b>protocol must be set to <i>Mobile</i></b></i>.</u> |
− | [[File: | + | [[File:Networking_rutos_manual_wan_mobile_configuration_mobile_data_limit_v1.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 964: | Line 455: | ||
<td>The amount of data that is allowed to be downloaded over the specified period of time. When the limit is reached, the device will no longer be able to establish a data connection until the period is over or the data limit is reset.</td> | <td>The amount of data that is allowed to be downloaded over the specified period of time. When the limit is reached, the device will no longer be able to establish a data connection until the period is over or the data limit is reset.</td> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Period</td> |
<td>Month <nowiki>|</nowiki> Week <nowiki>|</nowiki> Day; default: <b>Day</b></td> | <td>Month <nowiki>|</nowiki> Week <nowiki>|</nowiki> Day; default: <b>Day</b></td> | ||
<td>Data limit period after which the data counter is reset on the specified <i>Start day</i>.</td> | <td>Data limit period after which the data counter is reset on the specified <i>Start day</i>.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Start day <nowiki>|</nowiki> Start hour</td> |
− | <td>day [1..31] <nowiki>|</nowiki> day [Monday..Sunday] | + | <td>day [1..31] <nowiki>|</nowiki> day [Monday..Sunday] | hour [1..24]; default: <b>hour 0</b></td> |
<td>Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again.</td> | <td>Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable SMS warning</td> | <td>Enable SMS warning</td> | ||
− | <td>off <nowiki>|</nowiki | + | <td>off <nowiki>|</nowiki> on; default: <b>off</b></td> |
<td>Turns SMS warning on or off. When turned on and configured, sends an SMS message to a specified number after the SIM card uses a specified amount of data.</td> | <td>Turns SMS warning on or off. When turned on and configured, sends an SMS message to a specified number after the SIM card uses a specified amount of data.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Data limit* (MB)</td> |
− | <td> | + | <td>integer; default: <b>none</b></td> |
− | <td> | + | <td>The received data limit before sending an SMS warning. After reaching using the the amount of data specified in this field, the router will send an SMS warning message to the specified phone number.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td | + | <td>Phone number</td> |
<td>phone number; default: <b>none</b></td> | <td>phone number; default: <b>none</b></td> | ||
− | <td> | + | <td>Recipient's phone numbers.</td> |
</tr> | </tr> | ||
− | + | </table>|}} | |
− | |||
− | |||
− | |||
− | |||
− | </table | ||
− | |||
− | |||
− | |||
[[Category:{{{name}}} Network section]] | [[Category:{{{name}}} Network section]] |
Revision as of 12:01, 12 May 2020
Template:Networking rutos manual fw disclosure
Summary
The WAN page is used to to set up network interfaces WAN network interfaces which are
This manual page provides an overview of the WAN windows in {{{name}}} devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
WAN
The WAN section displays interfaces currently existing on this device.
[[File:Networking_{{{series}}}_manual_wan_v1.png|border|class=tlt-border]]
Interface configuration
This section provides information on WAN interface configuration. There is one type of WAN interface on the device:
To begin configuring an interface, click the 'Edit' button on the right side of the interface:
hour [1..24]; default: hour 0 Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again. Enable SMS warning off | on; default: off Turns SMS warning on or off. When turned on and configured, sends an SMS message to a specified number after the SIM card uses a specified amount of data. Data limit* (MB) integer; default: none The received data limit before sending an SMS warning. After reaching using the the amount of data specified in this field, the router will send an SMS warning message to the specified phone number. Phone number phone number; default: none Recipient's phone numbers.
[[Category:{{{name}}} Network section]]