Difference between revisions of "Template:Networking rutos manual snmp"
(91 intermediate revisions by 10 users not shown) | |||
Line 1: | Line 1: | ||
− | <!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} | + | <!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0--> |
− | {{Template: | + | {{Template:Networking_rutos_manual_fw_disclosure |
− | | | + | | fw_version = {{{series}}}_R_00.02.03.1 |
− | + | | series = {{{series}}} | |
− | |||
− | |||
− | |||
− | |||
}} | }} | ||
− | + | ||
− | |||
==Summary== | ==Summary== | ||
− | + | Simple Network Management Protocol (SNMP) is a popular protocol for network management. | |
− | + | It is used for collecting information, and configuring, network devices. | |
− | + | This section is an overview of the SNMP function in {{{name}}} devices. | |
− | + | You can download <b>MIB file</b> for each device in their <b>SNMP settings</b> page, at <b>SNMP System Summary</b> section. | |
− | |||
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer | {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer | ||
Line 25: | Line 19: | ||
==SNMP settings== | ==SNMP settings== | ||
− | The <b>SNMP settings</b> page is used to configure SNMP accessibility and general | + | The <b>SNMP settings</b> page is used to configure SNMP accessibility and general information in your device. |
===SNMP agent settings=== | ===SNMP agent settings=== | ||
---- | ---- | ||
− | [[File: | + | [[File:Networking rutx manual snmp agent settings v2.png|border|class=tlt-border]] |
− | |||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable SNMP service</td> | <td>Enable SNMP service</td> | ||
− | <td>off | on; default: | + | <td>off | on; default: '''off'''</td> |
<td>Run SNMP service on system's startup.</td> | <td>Run SNMP service on system's startup.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable remote access</td> | <td>Enable remote access</td> | ||
− | <td>off | on; default: | + | <td>off | on; default: '''off'''</td> |
<td>Open port in firewall so that SNMP service may be reached from WAN.</td> | <td>Open port in firewall so that SNMP service may be reached from WAN.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Protocol</td> |
− | <td> | + | <td>UDP | TCP; default: '''UDP'''</td> |
− | <td> | + | <td>SNMP service's protocol.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 69: | Line 62: | ||
<tr> | <tr> | ||
<td>SNMP v3 Mode</td> | <td>SNMP v3 Mode</td> | ||
− | <td>off | on; default: | + | <td>off | on; default: '''off'''</td> |
<td>Enable/disable SNMP v3 Mode.</td> | <td>Enable/disable SNMP v3 Mode.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | + | ===SNMP system summary=== | |
− | ===SNMP | ||
---- | ---- | ||
− | + | [[File:Networking rutx manual snmp system summary v2.png|border|class=tlt-border]] | |
− | |||
− | [[File: | ||
− | |||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>MIB file</td> | <td>MIB file</td> | ||
<td>-(interactive button)</td> | <td>-(interactive button)</td> | ||
− | <td>Downloads | + | <td>Downloads device MIB file.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 98: | Line 87: | ||
<tr> | <tr> | ||
<td>Location</td> | <td>Location</td> | ||
− | <td>string; default: | + | <td>string; default: '''location'''</td> |
<td>Trap named sysLocation.</td> | <td>Trap named sysLocation.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Contact</td> | <td>Contact</td> | ||
− | + | <td>string; default: '''[email protected]'''</td> | |
<td>Trap named sysContact.</td> | <td>Trap named sysContact.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Name</td> | <td>Name</td> | ||
− | <td>string; default: | + | <td>string; default: '''name'''</td> |
<td>Trap named sysName.</td> | <td>Trap named sysName.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
==SNMP v3 users== | ==SNMP v3 users== | ||
− | The <b>SNMP v3 users</b> page is used to create and manage users, who can be authenticated using SNMP v3. | + | The <b>SNMP v3 users</b> page is used to create and manage users, who can be authenticated using SNMP v3. |
+ | Create a User by simply writing a name and pressing '''Add''' button. | ||
− | + | [[File:Networking rutx manual snmp users v2.png|border|class=tlt-border]] | |
− | |||
− | |||
− | |||
− | |||
− | [[File: | ||
− | |||
− | |||
− | [[File: | + | You can modify User settings by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button. |
− | + | [[File:Networking rutx manual snmp user edit v2.png|border|class=tlt-border]]<table class="nd-mantable"> | |
− | |||
− | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable </td> | <td>Enable </td> | ||
− | <td>off | on; default: | + | <td>off | on; default: '''off'''</td> |
− | <td> | + | <td>Enable or disable user.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 162: | Line 142: | ||
<tr> | <tr> | ||
<td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication passphrase</td> | <td><span style="color:blue">Authentication, no privacy </span>{{!}} <span style="color:red">Authentication and privacy:</span> Authentication passphrase</td> | ||
− | <td>string; default: | + | <td>string; default: '''none'''</td> |
<td>Set authentication passpharse to generate key for SNMP v3.</td> | <td>Set authentication passpharse to generate key for SNMP v3.</td> | ||
</tr> | </tr> | ||
Line 172: | Line 152: | ||
<tr> | <tr> | ||
<td><span style="color:red">Authentication and privacy:</span> Privacy passphrase</td> | <td><span style="color:red">Authentication and privacy:</span> Privacy passphrase</td> | ||
− | <td>string; default: | + | <td>string; default: '''none'''</td> |
<td>Set privacy passpharse to generate key for SNMP v3.</td> | <td>Set privacy passpharse to generate key for SNMP v3.</td> | ||
</tr> | </tr> | ||
Line 182: | Line 162: | ||
<tr> | <tr> | ||
<td>MIB subtree</td> | <td>MIB subtree</td> | ||
− | <td>string; default: | + | <td>string; default: '''none'''</td> |
<td>Leave empty to access full MIB tree.</td> | <td>Leave empty to access full MIB tree.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
+ | |||
+ | <b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration. | ||
==Communities== | ==Communities== | ||
− | + | In SNMP community page you can manage access rights. | |
− | [[File: | + | [[File:Networking rutx manual snmp community v2.png|border|class=tlt-border]] |
− | + | You can access SNMP community settings by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button. | |
− | |||
− | [[File: | ||
+ | [[File:Networking rutx manual snmp community edit v2.png|border|class=tlt-border]] | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 220: | Line 201: | ||
<tr> | <tr> | ||
<td>Access Mode</td> | <td>Access Mode</td> | ||
− | <td>Read-Only | Read-Write; default: | + | <td>Read-Only | Read-Write; default: '''Read-Only'''</td> |
<td>Access mode for current community.</td> | <td>Access mode for current community.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
+ | ==Trap settings== | ||
− | + | SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A | |
+ | benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status | ||
+ | request from the manager. | ||
− | + | Trap settings page is divided in two sections - <b>Trap service settings</b> and <b>Trap rules</b>. Trap service settings | |
+ | lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts. | ||
− | + | [[File:Networking rutx manual snmp trap settings v1.png|border|class=tlt-border]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ===Trap Service Settings=== | + | ===Configure Trap Service Settings=== |
---- | ---- | ||
− | |||
− | |||
− | |||
− | + | To add another host click '''Add''' button at the right side of this table. | |
− | + | [[File:Networking rutx manual snmp trap settings trap service v1.png|border|class=tlt-border]] | |
− | |||
− | [[File: | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Host/IP</td> | <td>Host/IP</td> | ||
<td>url | ip; default: <b>none</b></td> | <td>url | ip; default: <b>none</b></td> | ||
− | <td> | + | <td>Host to transfer SNMP traffic to.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Port</td> | <td>Port</td> | ||
− | <td>integer [0..65535]; default: | + | <td>integer [0..65535]; default: '''162'''</td> |
− | <td> | + | <td>Port for trap's host.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Community</td> | <td>Community</td> | ||
− | <td>string; default: <b>Public</b></td> | + | <td>string; default: <b>Public</b> </td> |
− | <td> | + | <td>Community name.</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
</table> | </table> | ||
− | ===Trap Rules=== | + | ===Configure Trap Rules=== |
---- | ---- | ||
− | |||
− | You can | + | You can edit Trap rule by pressing [[File:Networking_rutx_manual_edit_button_v1.png]] '''Edit''' button in <b>Trap settings</b> page on preferred rule. |
− | [[File: | + | {{#ifeq:{{{mobile}}}|0| |
+ | [[File:Networking rutx10 manual snmp trap settings trap rule edit v1.png|border|class=tlt-border]] <!--rutx no mobile--> | ||
+ | | | ||
+ | [[File:Networking rutx manual snmp trap settings trap rule edit v1.png|border|class=tlt-border]] <!--rutx mobile--> | ||
+ | }} | ||
− | + | Above is an example of what rule configuration window looks like. | |
+ | Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. | ||
+ | To avoid redundancy, screenshots for the other rules will not be provided, since the structures, | ||
+ | syntax and the overall look of the configuration windows for each rule are very similar. | ||
+ | Instead, only tables containing information on how to edit each rule will be provided. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
====Signal strength==== | ====Signal strength==== | ||
---- | ---- | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable</td> | <td>Enable</td> | ||
− | <td>off | + | <td>off | on; default: '''on'''</td> |
<td>Enable or disable this rule.</td> | <td>Enable or disable this rule.</td> | ||
</tr> | </tr> | ||
Line 345: | Line 287: | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | + | ||
+ | |||
====Connection type==== | ====Connection type==== | ||
---- | ---- | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>field name</th> |
− | <th> | + | <th>value</th> |
− | <th> | + | <th>description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable</td> | <td>Enable</td> | ||
− | <td>off | + | <td>off | on; default: '''on'''</td> |
<td>Enable or disable this rule.</td> | <td>Enable or disable this rule.</td> | ||
</tr> | </tr> | ||
Line 365: | Line 308: | ||
<td>Rule will be triggered when connection type will change.</td> | <td>Rule will be triggered when connection type will change.</td> | ||
</tr> | </tr> | ||
− | </table> | + | </table> |
+ | |||
− | |||
====Input/Output==== | ====Input/Output==== | ||
---- | ---- | ||
Line 373: | Line 316: | ||
<tr> | <tr> | ||
<th>field name</th> | <th>field name</th> | ||
− | <th> | + | <th>value</th> |
<th>description</th> | <th>description</th> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable</td> | <td>Enable</td> | ||
− | <td>off | + | <td>off | on; default: '''on'''</td> |
<td>Enable or disable this rule.</td> | <td>Enable or disable this rule.</td> | ||
</tr> | </tr> | ||
Line 387: | Line 330: | ||
</tr> | </tr> | ||
{{#switch:{{{series}}} | {{#switch:{{{series}}} | ||
− | |RUTX | + | |RUTX = |
<tr> | <tr> | ||
<td>Input/Output type</td> | <td>Input/Output type</td> | ||
Line 395: | Line 338: | ||
<tr> | <tr> | ||
<td>Input/Output name</td> | <td>Input/Output name</td> | ||
− | <td> | + | <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td> |
<td>Which type of Inputs and Outputs to use in this rule.</td> | <td>Which type of Inputs and Outputs to use in this rule.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>State change</td> | <td>State change</td> | ||
− | <td> | + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
<td>On which Input/Output state will this rule be triggered.</td> | <td>On which Input/Output state will this rule be triggered.</td> | ||
</tr> | </tr> | ||
− | | | + | |TRB2XX = |
<tr> | <tr> | ||
<td>Input/Output type</td> | <td>Input/Output type</td> | ||
Line 416: | Line 359: | ||
<tr> | <tr> | ||
<td><span style="color:blue">Input/Output:</span> State change</td> | <td><span style="color:blue">Input/Output:</span> State change</td> | ||
− | <td> | + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
<td>On which Input/Output state will this rule be triggered.</td> | <td>On which Input/Output state will this rule be triggered.</td> | ||
</tr> | </tr> | ||
Line 429: | Line 372: | ||
<td>At which voltage value will this rule be triggered.</td> | <td>At which voltage value will this rule be triggered.</td> | ||
</tr> | </tr> | ||
− | | | + | |TRB14X = |
{{#ifeq:{{{name}}}|TRB141| | {{#ifeq:{{{name}}}|TRB141| | ||
<tr> | <tr> | ||
Line 443: | Line 386: | ||
<tr> | <tr> | ||
<td><span style="color:blue">Input/Output:</span> State change</td> | <td><span style="color:blue">Input/Output:</span> State change</td> | ||
− | <td> | + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
<td>On which Input/Output state will this rule be triggered.</td> | <td>On which Input/Output state will this rule be triggered.</td> | ||
</tr> | </tr> | ||
Line 499: | Line 442: | ||
<tr> | <tr> | ||
<td>State change</td> | <td>State change</td> | ||
− | <td> | + | <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td> |
<td>On which Input/Output state will this rule be triggered.</td> | <td>On which Input/Output state will this rule be triggered.</td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
− | + | |}} | |
− | + | }} | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</table> | </table> | ||
− | + | == SNMP Variables list == | |
− | ==SNMP | ||
− | |||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th style="width: 250px"> | + | <th style="width: 250px">NAME</th> |
<th style="width: 250px">OID</th> | <th style="width: 250px">OID</th> | ||
− | <th style="width: 579px"> | + | <th style="width: 579px">DESCRIPTION</th> |
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ModemImei.0</td> |
<td>.1.3.6.1.4.1.48690.1.1.0</td> | <td>.1.3.6.1.4.1.48690.1.1.0</td> | ||
− | <td> | + | <td>Modem IMEI</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ModemModel.0</td> |
<td>.1.3.6.1.4.1.48690.1.2.0</td> | <td>.1.3.6.1.4.1.48690.1.2.0</td> | ||
− | <td> | + | <td>Modem model</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ModemManufacturer.0</td> |
<td>.1.3.6.1.4.1.48690.1.3.0</td> | <td>.1.3.6.1.4.1.48690.1.3.0</td> | ||
− | <td> | + | <td>Modem manufacturer</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ModemRevision.0</td> |
<td>.1.3.6.1.4.1.48690.1.4.0</td> | <td>.1.3.6.1.4.1.48690.1.4.0</td> | ||
− | <td> | + | <td>Modem revision</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ModemSerial.0</td> |
<td>.1.3.6.1.4.1.48690.1.5.0</td> | <td>.1.3.6.1.4.1.48690.1.5.0</td> | ||
− | <td> | + | <td>Modem serial number</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Imsi.0</td> |
<td>.1.3.6.1.4.1.48690.1.6.0</td> | <td>.1.3.6.1.4.1.48690.1.6.0</td> | ||
− | <td> | + | <td>Modem IMSI</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>RouterName.0</td> |
<td>.1.3.6.1.4.1.48690.1.7.0</td> | <td>.1.3.6.1.4.1.48690.1.7.0</td> | ||
− | <td> | + | <td>Router's name</td> |
</tr> | </tr> | ||
− | + | <tr> | |
− | <td> | + | <td>ProductCode.0</td> |
<td>.1.3.6.1.4.1.48690.1.8.0</td> | <td>.1.3.6.1.4.1.48690.1.8.0</td> | ||
− | <td> | + | <td>Router's Product code</td> |
− | </tr> | + | </tr> |
+ | <tr> | ||
+ | <td>BatchNumber.0</td> | ||
+ | <td>.1.3.6.1.4.1.48690.1.9.0</td> | ||
+ | <td>Router's batch number</td> | ||
+ | </tr> | ||
<tr> | <tr> | ||
− | < | + | <td>HardwareRevision.0</td> |
− | < | + | <td>.1.3.6.1.4.1.48690.1.10.0</td> |
− | < | + | <td>Router's Hardware Revision number</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>SimState.0</td> |
<td>.1.3.6.1.4.1.48690.2.1.0</td> | <td>.1.3.6.1.4.1.48690.2.1.0</td> | ||
− | <td> | + | <td>SIM card status</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>PinState.0</td> |
<td>.1.3.6.1.4.1.48690.2.2.0</td> | <td>.1.3.6.1.4.1.48690.2.2.0</td> | ||
− | <td> | + | <td>PIN status</td> |
+ | </tr> | ||
+ | <tr> | ||
+ | <td>NetState.0</td> | ||
+ | <td>.1.3.6.1.4.1.48690.2.3.0</td> | ||
+ | <td>Mobile network registration status</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Signal.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.4.0</td> |
− | <td> | + | <td>Signal strength level</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Operator.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.5.0</td> |
− | <td> | + | <td>Operator currently in use</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>OperatorNumber.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.6.0</td> |
− | <td> | + | <td>Operator number (MCC+MNC)</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ConnectionState.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.7.0</td> |
− | <td> | + | <td>Data session connection state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ConnectionType.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.8.0</td> |
− | <td> | + | <td>Data session connection type</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Temperature.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.9.0</td> |
− | <td>Modem | + | <td>Modem's temperature in 0.1 degrees Celsius</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ReceivedToday.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.10.0</td> |
− | <td> | + | <td>Tee current day's RX packet count</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>SentToday.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.11.0</td> |
− | <td> | + | <td>The current day's TX packet count</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ReceivedYesterday.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.12.0</td> |
− | <td> | + | <td>Yesterday's RX packet count</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>SentYesterday.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.13.0</td> |
− | <td> | + | <td>Yesterday's TX packet count</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>FirmwareVersion.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.14.0</td> |
− | <td> | + | <td>Router's Firmware version</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>SimSlot.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.15.0</td> |
− | <td> | + | <td>SIM slot currently in use</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>RouterUptime.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.16.0</td> |
− | <td> | + | <td>Router up-time in seconds</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>ConnectionUptime.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.17.0</td> |
− | <td>Mobile | + | <td>Mobile connection up-time in seconds</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>MobileIP.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.18.0</td> |
− | <td> | + | <td>IP address of the mobile interface</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Sent.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.19.0</td> |
− | <td> | + | <td>The amount of data sent through the mobile interface</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Received.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.20.0</td> |
− | <td> | + | <td>The amount of data received through the mobile interface</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>CellID.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.21.0</td> |
− | <td> | + | <td>ID of the current mobile operator's cell </td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>SINR.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.22.0</td> |
<td>SINR value in dB</td> | <td>SINR value in dB</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>RSRP.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.23.0</td> |
<td>RSRP value in dBm</td> | <td>RSRP value in dBm</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>RSRQ.0</td> |
− | <td>.1.3.6.1.4.1.48690.2. | + | <td>.1.3.6.1.4.1.48690.2.24.0</td> |
<td>RSRQ value in dB</td> | <td>RSRQ value in dB</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotId.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.1.0</td> |
− | <td> | + | <td>Hotspot ID</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotSsid.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.2.0</td> |
− | <td> | + | <td>Hotspot SSID</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotEnableState.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.3.0</td> |
− | <td> | + | <td>Hotspot status (enabled or disabled)</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotIP.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.4.0</td> |
− | <td> | + | <td>Hotspot interface IP address</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotDownloadBandWidth.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.5.0</td> |
− | <td> | + | <td>Hotspot download bandwidth</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUploadBandWidth.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.3.4.6.0</td> |
− | <td> | + | <td>Hotspot upload bandwidth</td> |
</tr> | </tr> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<tr> | <tr> | ||
− | < | + | <td>hotSpotUsers.0</td> |
− | < | + | <td>.1.3.6.1.4.1.48690.3.4.7.0</td> |
− | < | + | <td>Hotspot users list</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersPass.0</td> |
− | <td>.1.3.6.1.4.1.48690.3. | + | <td>.1.3.6.1.4.1.48690.3.4.8.0 </td> |
− | <td> | + | <td>Hotspot users password list </td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersActive.0</td> |
− | <td>.1.3.6.1.4.1.48690.3. | + | <td>.1.3.6.1.4.1.48690.3.4.9.0</td> |
− | <td> | + | <td>List of active Hotspot users</td> |
</tr> | </tr> | ||
− | |||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersMac.0</td> |
− | <td>.1.3.6.1.4.1.48690.3. | + | <td>.1.3.6.1.4.1.48690.3.4.10.0</td> |
− | <td> | + | <td>Hotspot users MAC address list</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersIp.0</td> |
− | <td>.1.3.6.1.4.1.48690.3.4.0</td> | + | <td>.1.3.6.1.4.1.48690.3.4.11.0</td> |
− | <td> | + | <td>Hotspot users IP address list</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersStartTime.0</td> |
− | <td>.1.3.6.1.4.1.48690.3. | + | <td>.1.3.6.1.4.1.48690.3.4.12.0</td> |
− | <td> | + | <td>Hotspot users log in time list</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersUseTime.0</td> |
− | <td>.1.3.6.1.4.1.48690.4. | + | <td>.1.3.6.1.4.1.48690.3.4.13.0</td> |
− | <td> | + | <td>Hotspot users log in up-time list</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersDownload</td> |
− | <td>.1.3.6.1.4.1.48690 | + | <td>.0.1.3.6.1.4.1.48690.3.4.14.0</td> |
− | + | <td>Hotspot users downloaded data count</td> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotUsersUpload.0</td> |
− | <td>.1.3.6.1.4.1.48690 | + | <td>.1.3.6.1.4.1.48690.3.4.15.0</td> |
− | + | <td>Hotspot users uploaded data count</td> | |
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>hotSpotEndTime.0</td> |
− | + | <td>.1.3.6.1.4.1.48690.3.4.16.0</td> | |
− | + | <td>Hotspot</td> | |
− | |||
− | |||
− | |||
− | <td>.1.3.6.1.4.1.48690 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>DigitalInput.0</td> |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<td>.1.3.6.1.4.1.48690.5.1.0</td> | <td>.1.3.6.1.4.1.48690.5.1.0</td> | ||
− | <td> | + | <td>Digital input state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>DigitalIsolatedInput.0</td> |
<td>.1.3.6.1.4.1.48690.5.2.0</td> | <td>.1.3.6.1.4.1.48690.5.2.0</td> | ||
− | <td> | + | <td>Digital isolated input state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>AnalogInput.0</td> |
<td>.1.3.6.1.4.1.48690.5.3.0</td> | <td>.1.3.6.1.4.1.48690.5.3.0</td> | ||
− | <td> | + | <td>Analog input state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>DigitalOCOutput.0</td> |
<td>.1.3.6.1.4.1.48690.5.4.0</td> | <td>.1.3.6.1.4.1.48690.5.4.0</td> | ||
− | <td> | + | <td>Digital OC output state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>DigitalRelayOutput.0</td> |
<td>.1.3.6.1.4.1.48690.5.5.0</td> | <td>.1.3.6.1.4.1.48690.5.5.0</td> | ||
− | <td> | + | <td>Digital Relay output state</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | < | + | <td>AnalogInputCalc.0</td> |
− | < | + | <td>.1.3.6.1.4.1.48690.5.6.0</td> |
− | < | + | <td>Analog input value</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Longtitude.0</td> |
− | <td>.1.3.6.1.4.1.48690 | + | <td>.1.3.6.1.4.1.48690.6.1.0</td> |
− | <td> | + | <td>GPS Longitude value</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Latitude.0</td> |
− | <td>.1.3.6.1.4.1.48690 | + | <td>.1.3.6.1.4.1.48690.6.2.0</td> |
− | <td> | + | <td>GPS Latitude value</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Accuracy.0</td> |
− | <td>.1.3.6.1.4.1.48690 | + | <td>.1.3.6.1.4.1.48690.6.3.0</td> |
− | <td> | + | <td>GPS coordinate accuracy</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
− | <td> | + | <td>Datetime.0</td> |
− | + | <td>.1.3.6.1.4.1.48690.6.4.0</td> | |
− | + | <td>GPS coordinate fix time</td> | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td>.1.3.6.1.4.1.48690 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | <td> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</tr> | </tr> | ||
− | |||
<tr> | <tr> | ||
− | <td> | + | <td>NumSatellites.0</td> |
− | <td>.1.3.6.1.4.1.48690. | + | <td>.1.3.6.1.4.1.48690.6.5.0</td> |
− | <td> | + | <td>Number of GPS satelites</td> |
</tr> | </tr> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
</table> | </table> | ||
− | |||
[[Category:{{{name}}} Services section]] | [[Category:{{{name}}} Services section]] |
Revision as of 12:12, 19 May 2020
Template:Networking rutos manual fw disclosure
Summary
Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information, and configuring, network devices. This section is an overview of the SNMP function in {{{name}}} devices.
You can download MIB file for each device in their SNMP settings page, at SNMP System Summary section.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
SNMP settings
The SNMP settings page is used to configure SNMP accessibility and general information in your device.
SNMP agent settings
File:Networking rutx manual snmp agent settings v2.png
field name | value | description |
---|---|---|
Enable SNMP service | off | on; default: off | Run SNMP service on system's startup. |
Enable remote access | off | on; default: off | Open port in firewall so that SNMP service may be reached from WAN. |
Protocol | UDP | TCP; default: UDP | SNMP service's protocol. |
Port | integer [0..65535]; default: 161 | SNMP service's port. |
SNMP v1 Mode | off | on; default: on | Enable/disable SNMP v1 Mode. |
SNMP v2c Mode | off | on; default: on | Enable/disable SNMP v2c Mode. |
SNMP v3 Mode | off | on; default: off | Enable/disable SNMP v3 Mode. |
SNMP system summary
File:Networking rutx manual snmp system summary v2.png
field name | value | description |
---|---|---|
MIB file | -(interactive button) | Downloads device MIB file. |
System OID | 1.3.6.1.4.1.48690 | OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy. |
Location | string; default: location | Trap named sysLocation. |
Contact | string; default: [email protected] | Trap named sysContact. |
Name | string; default: name | Trap named sysName. |
SNMP v3 users
The SNMP v3 users page is used to create and manage users, who can be authenticated using SNMP v3. Create a User by simply writing a name and pressing Add button.
You can modify User settings by pressing Edit button.
File:Networking rutx manual snmp user edit v2.png
field name | value | description |
---|---|---|
Enable | off | on; default: off | Enable or disable user. |
Username | string; default: none | Set username to access SNMP. |
Security level | No authentication, no privacy | Authentication, no privacy | Authentication and privacy; default: No authentication, no privacy | A security level is an authentication strategy that is set up for the user.
No authentication, no privacy - authenticates with a username. Authentication - provides MD5 or SHA algorithms for authentication. Privacy - Provides DES or AES encryption. |
Authentication, no privacy | Authentication and privacy: Authentication type | SHA | MD5; default: SHA | Set authentication type to use with SNMP v3. |
Authentication, no privacy | Authentication and privacy: Authentication passphrase | string; default: none | Set authentication passpharse to generate key for SNMP v3. |
Authentication and privacy: Privacy type | DES | AES; default: DES | Set privacy type to use with SNMP v3. |
Authentication and privacy: Privacy passphrase | string; default: none | Set privacy passpharse to generate key for SNMP v3. |
Access Mode | Read-Only | Read-Write; default: Read-Only | The access mode specifies the access the hosts in the community are allowed with respect to retrieving and modifying the MIB variables from a specific SNMP agent. |
MIB subtree | string; default: none | Leave empty to access full MIB tree. |
Note: this table has coloring scheme to indicate which fields can be seen with different configuration.
Communities
In SNMP community page you can manage access rights.
File:Networking rutx manual snmp community v2.png
You can access SNMP community settings by pressing Edit button.
File:Networking rutx manual snmp community edit v2.png
field name | value | description |
---|---|---|
Community name | string; default: none | Name of the community. |
IP Address | ip; default: none | IP address of the community. |
IP Mask | ip; default: none | Netmask for IP of the community. |
Access Mode | Read-Only | Read-Write; default: Read-Only | Access mode for current community. |
Trap settings
SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.
Trap settings page is divided in two sections - Trap service settings and Trap rules. Trap service settings lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts.
File:Networking rutx manual snmp trap settings v1.png
Configure Trap Service Settings
To add another host click Add button at the right side of this table.
field name | value | description |
---|---|---|
Host/IP | url | ip; default: none | Host to transfer SNMP traffic to. |
Port | integer [0..65535]; default: 162 | Port for trap's host. |
Community | string; default: Public | Community name. |
Configure Trap Rules
You can edit Trap rule by pressing Edit button in Trap settings page on preferred rule.
File:Networking rutx manual snmp trap settings trap rule edit v1.png
Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
Signal strength
field name | value | description |
---|---|---|
Enable | off | on; default: on | Enable or disable this rule. |
Action | Signal strength trap | Rule will be triggered if signal strength falls below specified number. |
Signal strength | integer [-130..0]; default: none | GSM signal's strength value in dBm, e.g. -85 |
Connection type
field name | value | description |
---|---|---|
Enable | off | on; default: on | Enable or disable this rule. |
Action | Connection type trap | Rule will be triggered when connection type will change. |
Input/Output
field name | value | description |
---|---|---|
Enable | off | on; default: on | Enable or disable this rule. |
Action | Input/Output trap | Rule will be triggered when specified input or output state will change. |
SNMP Variables list
NAME | OID | DESCRIPTION |
---|---|---|
ModemImei.0 | .1.3.6.1.4.1.48690.1.1.0 | Modem IMEI |
ModemModel.0 | .1.3.6.1.4.1.48690.1.2.0 | Modem model |
ModemManufacturer.0 | .1.3.6.1.4.1.48690.1.3.0 | Modem manufacturer |
ModemRevision.0 | .1.3.6.1.4.1.48690.1.4.0 | Modem revision |
ModemSerial.0 | .1.3.6.1.4.1.48690.1.5.0 | Modem serial number |
Imsi.0 | .1.3.6.1.4.1.48690.1.6.0 | Modem IMSI |
RouterName.0 | .1.3.6.1.4.1.48690.1.7.0 | Router's name |
ProductCode.0 | .1.3.6.1.4.1.48690.1.8.0 | Router's Product code |
BatchNumber.0 | .1.3.6.1.4.1.48690.1.9.0 | Router's batch number |
HardwareRevision.0 | .1.3.6.1.4.1.48690.1.10.0 | Router's Hardware Revision number |
SimState.0 | .1.3.6.1.4.1.48690.2.1.0 | SIM card status |
PinState.0 | .1.3.6.1.4.1.48690.2.2.0 | PIN status |
NetState.0 | .1.3.6.1.4.1.48690.2.3.0 | Mobile network registration status |
Signal.0 | .1.3.6.1.4.1.48690.2.4.0 | Signal strength level |
Operator.0 | .1.3.6.1.4.1.48690.2.5.0 | Operator currently in use |
OperatorNumber.0 | .1.3.6.1.4.1.48690.2.6.0 | Operator number (MCC+MNC) |
ConnectionState.0 | .1.3.6.1.4.1.48690.2.7.0 | Data session connection state |
ConnectionType.0 | .1.3.6.1.4.1.48690.2.8.0 | Data session connection type |
Temperature.0 | .1.3.6.1.4.1.48690.2.9.0 | Modem's temperature in 0.1 degrees Celsius |
ReceivedToday.0 | .1.3.6.1.4.1.48690.2.10.0 | Tee current day's RX packet count |
SentToday.0 | .1.3.6.1.4.1.48690.2.11.0 | The current day's TX packet count |
ReceivedYesterday.0 | .1.3.6.1.4.1.48690.2.12.0 | Yesterday's RX packet count |
SentYesterday.0 | .1.3.6.1.4.1.48690.2.13.0 | Yesterday's TX packet count |
FirmwareVersion.0 | .1.3.6.1.4.1.48690.2.14.0 | Router's Firmware version |
SimSlot.0 | .1.3.6.1.4.1.48690.2.15.0 | SIM slot currently in use |
RouterUptime.0 | .1.3.6.1.4.1.48690.2.16.0 | Router up-time in seconds |
ConnectionUptime.0 | .1.3.6.1.4.1.48690.2.17.0 | Mobile connection up-time in seconds |
MobileIP.0 | .1.3.6.1.4.1.48690.2.18.0 | IP address of the mobile interface |
Sent.0 | .1.3.6.1.4.1.48690.2.19.0 | The amount of data sent through the mobile interface |
Received.0 | .1.3.6.1.4.1.48690.2.20.0 | The amount of data received through the mobile interface |
CellID.0 | .1.3.6.1.4.1.48690.2.21.0 | ID of the current mobile operator's cell |
SINR.0 | .1.3.6.1.4.1.48690.2.22.0 | SINR value in dB |
RSRP.0 | .1.3.6.1.4.1.48690.2.23.0 | RSRP value in dBm |
RSRQ.0 | .1.3.6.1.4.1.48690.2.24.0 | RSRQ value in dB |
hotSpotId.0 | .1.3.6.1.4.1.48690.3.4.1.0 | Hotspot ID |
hotSpotSsid.0 | .1.3.6.1.4.1.48690.3.4.2.0 | Hotspot SSID |
hotSpotEnableState.0 | .1.3.6.1.4.1.48690.3.4.3.0 | Hotspot status (enabled or disabled) |
hotSpotIP.0 | .1.3.6.1.4.1.48690.3.4.4.0 | Hotspot interface IP address |
hotSpotDownloadBandWidth.0 | .1.3.6.1.4.1.48690.3.4.5.0 | Hotspot download bandwidth |
hotSpotUploadBandWidth.0 | .1.3.6.1.4.1.48690.3.4.6.0 | Hotspot upload bandwidth |
hotSpotUsers.0 | .1.3.6.1.4.1.48690.3.4.7.0 | Hotspot users list |
hotSpotUsersPass.0 | .1.3.6.1.4.1.48690.3.4.8.0 | Hotspot users password list |
hotSpotUsersActive.0 | .1.3.6.1.4.1.48690.3.4.9.0 | List of active Hotspot users |
hotSpotUsersMac.0 | .1.3.6.1.4.1.48690.3.4.10.0 | Hotspot users MAC address list |
hotSpotUsersIp.0 | .1.3.6.1.4.1.48690.3.4.11.0 | Hotspot users IP address list |
hotSpotUsersStartTime.0 | .1.3.6.1.4.1.48690.3.4.12.0 | Hotspot users log in time list |
hotSpotUsersUseTime.0 | .1.3.6.1.4.1.48690.3.4.13.0 | Hotspot users log in up-time list |
hotSpotUsersDownload | .0.1.3.6.1.4.1.48690.3.4.14.0 | Hotspot users downloaded data count |
hotSpotUsersUpload.0 | .1.3.6.1.4.1.48690.3.4.15.0 | Hotspot users uploaded data count |
hotSpotEndTime.0 | .1.3.6.1.4.1.48690.3.4.16.0 | Hotspot |
DigitalInput.0 | .1.3.6.1.4.1.48690.5.1.0 | Digital input state |
DigitalIsolatedInput.0 | .1.3.6.1.4.1.48690.5.2.0 | Digital isolated input state |
AnalogInput.0 | .1.3.6.1.4.1.48690.5.3.0 | Analog input state |
DigitalOCOutput.0 | .1.3.6.1.4.1.48690.5.4.0 | Digital OC output state |
DigitalRelayOutput.0 | .1.3.6.1.4.1.48690.5.5.0 | Digital Relay output state |
AnalogInputCalc.0 | .1.3.6.1.4.1.48690.5.6.0 | Analog input value |
Longtitude.0 | .1.3.6.1.4.1.48690.6.1.0 | GPS Longitude value |
Latitude.0 | .1.3.6.1.4.1.48690.6.2.0 | GPS Latitude value |
Accuracy.0 | .1.3.6.1.4.1.48690.6.3.0 | GPS coordinate accuracy |
Datetime.0 | .1.3.6.1.4.1.48690.6.4.0 | GPS coordinate fix time |
NumSatellites.0 | .1.3.6.1.4.1.48690.6.5.0 | Number of GPS satelites |
[[Category:{{{name}}} Services section]]