|
|
(105 intermediate revisions by 5 users not shown) |
Line 1: |
Line 1: |
| {{Template: Networking_rutos_firmware_downloads | | {{Template: Networking_rutos_firmware_downloads |
− | <!------------------------DEVICE----------------------->
| |
| | name = TRB142 | | | name = TRB142 |
| | series = TRB1 | | | series = TRB1 |
| + | | latest_fw = TRB14X_R_00.02.03.1 |
| + | | latest_date = 2020.05.15 |
| + | | latest_md5 = cd0f962b34a33d71eba57ec5c092663d |
| + | | factory_fw = TRB1420_R_00.01.06.1 |
| + | | factory_date = 2019.12.19 |
| + | | factory_md5 = c082438c6468bd7f7a107b5e5578b8a2 |
| }} | | }} |
| | | |
| ==Changelog== | | ==Changelog== |
− | <!--NEW_FW-->
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.10/TRB1/TRB1_R_00.07.10_WEBUI.bin TRB1_R_00.07.10]</span></b> | 2024.10.10===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: added ability to export modem debug and USSD responses to CSV file
| |
− | *** Mobile: added "hologram" APN for "Hologram" operator
| |
− | *** Mobile: added "wbdata" APN for "Granite" operator
| |
− | *** Mobile: added "netw.vp" and "netw2.vp" APNs for "Networth" operator to APN database
| |
− | *** NAT64: added "jool" package for NAT64 support
| |
− | ** <b>Services</b>
| |
− | *** AWS IoT Core: added service
| |
− | *** BACnet: added ability to configure several BIP interfaces, to set network numbers and preconfigure BDT entries for BBMD
| |
− | *** Console: added service status information display
| |
− | *** DLMS: added service status information display
| |
− | *** DNP3 Client: added service status information display
| |
− | *** DNP3 Outstation: added service status information display
| |
− | *** Modbus Client: added service status information display
| |
− | *** Modbus Server: added service status information display
| |
− | *** Modbus TCP over Serial Gateway: added service status information display
| |
− | *** Modem Control: added service status information display
| |
− | *** MQTT Modbus Gateway: added service status information display
| |
− | *** NTRIP: added service status information display
| |
− | *** OPC UA Client: added service status information display
| |
− | *** OPC UA Server: added variable "rut_wan_type" which shows if WAN is on a wired or a mobile network
| |
− | *** OPC UA Server: added service status information display
| |
− | *** RMS: added SOCKS5 proxy support
| |
− | ** <b>System</b>
| |
− | *** Certificates: added SCEP certificate generation method
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Curl: added unix socket support
| |
− | *** Firewall: added most options to basic mode for all firewall pages
| |
− | *** Firewall: added all firewall pages to basic mode
| |
− | *** Interfaces: increased interface metric maximum value from 10000 to 4294967295
| |
− | *** Mobile: added "flolive.net" APN for "Telecom Italia", "Telefonica O2" and "Telefonica Movistar" operators to APN database
| |
− | *** Mobile: changed the default APN for IMS protocol from "VZWIMS" to "IMS" for "Verizon" operator
| |
− | *** Mobile: fixed an issue where the ICCID was not returned correctly when the SIM card's ICCID ended with letters
| |
− | *** Mobile: improved 5G NSA CA information display
| |
− | *** Mobile: improved SIM and eSIM management via LPAC service
| |
− | *** Multi WAN: added rules table to basic mode
| |
− | *** Static Routes: added page to basic mode
| |
− | *** VRRP: added page to basic mode
| |
− | ** <b>Services</b>
| |
− | *** DLMS: added meter COSEM object scanning
| |
− | *** DNP3 Client: made menu names more consistent
| |
− | *** IPsec: improved 'Remote endpoint' validation to allow '%any', '%any4', '%any6' values and netmask
| |
− | *** IPsec: added ability to use certificates from Certificate Manager
| |
− | *** L2TPv3: added Tunnel ID and Session ID validation to avoid creating multiple tunnels with the same parameters
| |
− | *** Modbus Client: updated Modbus Client menu position
| |
− | *** Modbus Server: updated Modbus Server menu position
| |
− | *** Python3: changed python3-light package libraries
| |
− | *** SMS Utilities: added an option to enable or disable the return of status code message
| |
− | *** Tinc: added options to set the tunnel's IP address
| |
− | *** Tinc: added a port option to listen for incoming connections and the ability to specify a port for outgoing connections
| |
− | *** Wireguard: added tunnel source mode selection
| |
− | *** Python3: updated version to 3.11.7
| |
− | *** Strongswan: updated version to 5.9.14
| |
− | ** <b>System</b>
| |
− | *** Access Control: refactored 'General', 'Security' and 'PAM' Web pages
| |
− | *** Auto Reboot: added support for multiple hosts/URLs in Ping/Wget Reboot
| |
− | *** Backup: encrypting backup does not require 7zip package anymore
| |
− | *** Certificates: split "Let's Encrypt" certificates into multiple files
| |
− | *** Troubleshoot: added dynamic routes debugging information
| |
− | *** WebUI: added ability to open new page in new tab without entering user credentials
| |
− | *** WebUI: improved SDK example application
| |
− | *** Glib2: updated version to 2.80.5
| |
− | *** Kernel: updated version to 5.4.282
| |
− | *** Ncurses: updated version to 6.5
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Firewall: fixed automatic priority option change
| |
− | *** Mobile: fixed hang up of QMI WDS service
| |
− | *** Mobile: fixed QMI errors when multi APN is configured
| |
− | *** Mobile: fixed typo in "m2m.airinternet.eu" APN for "Airinternet" operator in APN database
| |
− | *** Network: fixed mobile Bridge/Passthrough mode not working after changing LAN interface settings
| |
− | *** Network: fixed "LAN to WAN" and "WAN to LAN" button errors
| |
− | ** <b>Services</b>
| |
− | *** BACnet: fixed communication issues between the ports
| |
− | *** BACnet: added all available default baud rates
| |
− | *** BGP: fixed AS field to allow duplicate values
| |
− | *** BGP: fixed Access list filters not applying fully
| |
− | *** DLMS: added all available default baud rates
| |
− | *** DMVPN: fixed DMVPN GRE instance disappearing when creating new IPsec instance
| |
− | *** DNP3 Client: removed unnecessary max length display for test response field
| |
− | *** DNP3 Client: renamed TCP Station to TCP Client in the API documentation
| |
− | *** DNP3 Client: added all available default baud rates
| |
− | *** DNP3 Outstation: added all available default baud rates
| |
− | *** GRE: fixed interface not showing up in OSPF and RIP selections if it is off
| |
− | *** IPsec: fixed IP rule not appearing after network restart
| |
− | *** IPsec: fixed duplicate port values in IPsec firewall rules
| |
− | *** Ledman: fixed issue when power LED turns off when rebooting device
| |
− | *** Modbus Client: added all available default baud rates
| |
− | *** Modbus Client: added missing API docs for Modbus test request
| |
− | *** Modbus Server: added all available default baud rates
| |
− | *** Modbus Server: fixed firewall rule staying enabled when app is disabled
| |
− | *** Modbus Server: fixed firewall rule creation
| |
− | *** Modem Control: added all available default baud rates
| |
− | *** Modem Control: fixed a bug where, under certain conditions, modem payloads were sent to serial ports instead of the intended destination
| |
− | *** NTRIP: added all available default baud rates
| |
− | *** OpenVPN: fixed the configuration after disabling the use of external services
| |
− | *** OpenVPN: fixed OpenVPN restarting when mobile interface comes up
| |
− | *** Over IP: added all available default baud rates
| |
− | *** SNMP: fixed Hotspot OIDs' hssID and hssUsername display
| |
− | *** Tinc: fixed adding routes to remote subnets
| |
− | *** Tinc: fixed configuration generation issues when creating multiple network and host instances
| |
− | *** Tinc: fixed issues with route creation when using IPv6 addresses in tunnel configuration
| |
− | *** Tinc: fixed validation for uploading key files
| |
− | ** <b>System</b>
| |
− | *** Backup: fixed uploading backup with memory expansion enabled
| |
− | *** CLI: fixed some private IPs being incorrectly determined as public
| |
− | *** JSON-RPC: fixed login "Access Denied" error
| |
− | *** Update Firmware: fixed occasional device reboot when upgrading FW when "partial modem control" is enabled
| |
− | *** USB: fixed device detection issue on some Windows systems
| |
− | *** WebUI: added API required values validation when enabling BACnet, DLMS, DNP3, Modbus, MQTT, NTRIP services
| |
− | *** WebUI: fixed 'Memory' status card progress bars visuals
| |
− | *** WebUI: fixed search bar suggestions after removing packages
| |
− | *** WebUI: fixed showing data in modals for users with only read permissions
| |
− | *** WebUI: fixed custom SDK pages not loading correctly
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2021-3520
| |
− | ** CVE-2021-44540
| |
− | ** CVE-2021-44541
| |
− | ** CVE-2024-4032
| |
− | ** CVE-2024-6119
| |
− | ** CVE-2024-6232
| |
− | ** CVE-2024-6923
| |
− | ** CVE-2024-7264
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.4/TRB1/TRB1_R_00.07.09.4_WEBUI.bin TRB1_R_00.07.09.4]</span></b> | 2024.10.02===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: changed default NTP servers
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** NTP Client: fixed NTP server usage to work with next in line server if current server does not respond
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.3/TRB1/TRB1_R_00.07.09.3_WEBUI.bin TRB1_R_00.07.09.3]</span></b> | 2024.09.27===
| |
− | * Firmware includes no changes for this device
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9.1/TRB1/TRB1_R_00.07.09.1_WEBUI.bin TRB1_R_00.07.09.1]</span></b> | 2024.09.13===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** Python3: updated version to 3.11.7
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: fixed eSIM profile config generation
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.9/TRB1/TRB1_R_00.07.09_WEBUI.bin TRB1_R_00.07.09]</span></b> | 2024.09.03===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: added VXLAN support
| |
− | *** Firewall: added ability to configure NAT rule action
| |
− | *** Firewall: added additional TTL target for firewall rules
| |
− | *** Mobile: added "datamobile.ag" APN for "Datamobile.ag" operator to APN database
| |
− | *** Mobile: added "m2m.ajrinternet.eu" APN for "Airinternet" operator to APN database
| |
− | *** Mobile: added "wbdata" APN for "Webbing" operator to APN database
| |
− | *** Mobile: added "inetd.vodafone.iot" APN for "Vodafone" operator to APN database
| |
− | *** Mobile: added "asm" APN for "ASM" operator to APN database
| |
− | *** Realtime Traffic: added historical traffic charts
| |
− | ** <b>Services</b>
| |
− | *** Events Reporting: added new firmware version notification event
| |
− | *** SNMP: added Multiwan data module
| |
− | ** <b>System</b>
| |
− | *** WebUI: added notifications menu
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: improved network bring up after operator scan
| |
− | *** Mobile: updated bands selection to include band number and frequency
| |
− | *** Mobile: improved SIM card notifications to get removed when SIM card state or active SIM changes
| |
− | *** Mobile: improved modem update notifications to show modem name
| |
− | *** Mobile: removed the USSD feature from the data-only modems
| |
− | *** Realtime Traffic: improved chart styles
| |
− | ** <b>Services</b>
| |
− | *** Call Utilities: added check if the number is blocked before doing action
| |
− | *** Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
| |
− | *** DLMS: added SHA256 authentication
| |
− | *** DLMS: improved COSEM group enable validation
| |
− | *** GRE: reduced GRE keepalive packet buffer size
| |
− | *** IPsec: added support for route based tunnel
| |
− | *** L2TP: added field for custom options
| |
− | *** SMPP: added timeout option
| |
− | *** Web Filter: added hostname count message after successful file upload
| |
− | ** <b>System</b>
| |
− | *** Access Control: improved system user's access control rules logic
| |
− | *** Access Control: added option to disable password auth for the root user
| |
− | *** Administration: improved write/read access control options display to match meniu path style
| |
− | *** Backup: improved backup page by splitting it into backup and reset settings page
| |
− | *** Update Firmware: changed firmware update log to include firmware version
| |
− | *** WebUI: updated firmware and backup verification pages design
| |
− | *** WebUI: improved global alerts display
| |
− | *** WebUI: added confirmation prompt for disabling service in side widget
| |
− | *** Kernel: updated version to 5.4.279
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
| |
− | *** Mobile: fixed data limit widget to show used data for inactive interface
| |
− | *** Mobile: fixed Bridge/Passthrough modes for routed networks
| |
− | *** Mobile: fixed incorrect date values when setting SMS limit
| |
− | *** Mobile: fixed SMS used data header counter
| |
− | *** Mobile: fixed the issue where the PUK event was not displayed when the SIM PIN was blocked
| |
− | *** Mobile: fixed uqmi start-network authentication issue
| |
− | *** Mobile: fixed modem info not being filled on devices with more than one modem
| |
− | *** Mobile: fixed mobile data limit to calculate correct used limits when using ipv4 and ipv6 simultaneously
| |
− | *** Mobile: fixed USSD over IMS error handling
| |
− | *** Mobile: fixed an issue where the interface could hang if the modem was busy
| |
− | *** Network: fixed incorrect date values when setting data limit
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
| |
− | *** Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
| |
− | *** Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
| |
− | *** DLMS: fixed OBIS code validation
| |
− | *** Input/Output: added I/O juggler reload when I/O pin direction is changed
| |
− | *** OPC UA Client: fixed TCL file upload
| |
− | *** OPC UA Server: fixed TCL file upload
| |
− | *** OPC UA Server: fixed configuration migration
| |
− | *** OpenVPN: fixed default firewall zone for tap interfaces
| |
− | *** SNMP: fixed TELTONIKA-MIB wireless module crash
| |
− | *** SNMP: fixed mobile network state display
| |
− | *** SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
| |
− | ** <b>System</b>
| |
− | *** API Core: fixed file deletion
| |
− | *** Package Restore: fixed automatic package re-installation after firmware upgrade
| |
− | *** Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
| |
− | *** USB: fixed RNDIS driver detection on Windows systems
| |
− | *** User Settings: fixed page to show groups and users if the user has been granted access
| |
− | *** WebUI: fixed overview page to display active wireless (WLAN) clients
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2021-32292
| |
− | ** CVE-2022-40617
| |
− | ** CVE-2023-49441
| |
− | ** CVE-2024-0397
| |
− | ** CVE-2024-3596
| |
− | ** CVE-2024-5535
| |
− | ** CVE-2024-8088
| |
− | ** CVE-2024-26669
| |
− | ** CVE-2024-26739
| |
− | ** CVE-2024-36901
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.8.2/TRB1/TRB1_R_00.07.08.2_WEBUI.bin TRB1_R_00.07.08.2]</span></b> | 2024.08.12===
| |
− | * <b>Fix</b>
| |
− | ** <b>System</b>
| |
− | *** Update Firmware: fixed inconsistent firmware download from FOTA
| |
− | ----
| |
− | ===<b>TRB1_R_00.07.08.1</b> | 2024.08.06===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: improved firmware downgrade validation for Quectel modules
| |
− | ** <b>Services</b>
| |
− | *** Zerotier: updated version to 1.14.0
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: fixed an issue where in some cases mobile network interfaces would not be brought down properly
| |
− | *** Mobile: fixed memory fault while allowlist and denied data roaming enabled
| |
− | *** Mobile: fixed illegal instruction fault on modem control services
| |
− | *** Network: fixed default route not being added for PPPoE connections
| |
− | ** <b>Services</b>
| |
− | *** Modbus TCP over Serial Gateway: fixed serial connection not working after reboot
| |
− | *** OPC UA Client: fixed connections not being closed after using testing functionality
| |
− | ** <b>System</b>
| |
− | *** WebUI: fixed SDK WebUI package compilation
| |
− | ----
| |
− | ===<b>TRB1_R_00.07.08</b> | 2024.07.18===
| |
− | <b>Note:</b> This firmware version was removed due to an issue with FOTA firmware download.
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** DNS: added inherited server status to configuration page
| |
− | *** HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
| |
− | *** Mobile: added SIM card lock/unlock functionality in Mobile->Utilities page
| |
− | *** Mobile: added SIM card PIN change functionality in Mobile->Utilities page
| |
− | *** Mobile: added new Mobile->Limits page which shows information and allows to configure Data and SMS limits
| |
− | *** Mobile: added DFOTA support for RG520N modems
| |
− | *** Mobile: added nr-arfcn display to mobile status page
| |
− | *** Mobile: added dfota support for devices with RG520N-EB modem
| |
− | ** <b>Services</b>
| |
− | *** Data to Server: added 'Lua script' data input
| |
− | *** Input/Output: added ability to configure gpio debounce timer and changed default gpio debounce timer value from 200 ms to 10 ms
| |
− | *** IPsec: added initial XFRM support
| |
− | *** MQTT Modbus Gateway: added JSON message type format
| |
− | *** OpenVPN: added DCO support
| |
− | ** <b>System</b>
| |
− | *** API Core: added option to configure api session timeout
| |
− | *** Certificates: added "Let's encrypt" certificate generation
| |
− | *** PAM: added RADIUS external user support
| |
− | *** UI Core: added data analytics support
| |
− | *** Update Firmware: added warning message about device being temporarily unreachable on firmware update
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
| |
− | *** DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
| |
− | *** Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
| |
− | *** Mobile: improved IMS context initialization
| |
− | *** Mobile: updated SMS memory management for multipart SMS
| |
− | *** Mobile: added error message when attempting to enable the SIM switch without any criteria set
| |
− | *** Mobile: added informative message in SIM switch page when Data/SMS limit criteria are enabled but the limits themselves are not set up
| |
− | *** Mobile: moved operator list allowlist/blocklist selection to Network selection page
| |
− | *** Mobile: refactored Scanned operators modal, added repeat scan button
| |
− | *** Mobile: added ability to view previously scanned operators in Network selection and Operator lists pages
| |
− | *** Mobile: added ability to edit operator list name and initiate scans for operators in Operator lists page
| |
− | *** Mobile: updated operator code field list to include APNs from the APN database in Operator lists page
| |
− | *** Mobile: split Mobile->General page into three pages: General, Connection and Utilities pages
| |
− | *** Mobile: added mobile interface with highest priority APN configuration in Mobile->General page
| |
− | *** Mobile: added icons with hints which show SIM card, operator, data connection statuses in Mobile->General page
| |
− | *** Mobile: moved Mobile data limit section to a tab in WAN page
| |
− | *** Mobile: added informative message in WAN page to indicate whether the connection will be made using APN from APN database, empty or custom APN
| |
− | *** Mobile: improved logging of ping error messages
| |
− | *** Mobile: added 5G SA/NSA mode selection
| |
− | *** Mobile: improved modem updater to stop ping reboot service while update is in progress
| |
− | *** Mobile: improved the handling of denied messages upon SIM switch
| |
− | *** Mobile: added notification when a multi-IMSI SIM card is using Auto APN
| |
− | *** Mobile: added validation to not allow passthrough and bridge mode when one already exists
| |
− | *** Mobile: improved safeguards for modem services startup
| |
− | *** Mobile: improved modem update status display
| |
− | *** Mobile: added corrupted mobile statistics database restoration functionallity
| |
− | *** Mobile: improved setting of IPv4 and IPv6 types inside the modules
| |
− | *** Mobile: improved provider name parsing for SLM750 modem
| |
− | *** Multi WAN: improved interface status representation when using load balancing
| |
− | *** Network: added more options for "IPv6 assignment length" field
| |
− | ** <b>Services</b>
| |
− | *** Azure IoT Hub: added DPS symmetric key attestation support
| |
− | *** Azure IoT Hub: added Direct Method support
| |
− | *** Azure IoT Hub: added Plug and Play integration
| |
− | *** Azure IoT Hub: added link to "Data to Server" page
| |
− | *** Data to Server: added support for multiple filters
| |
− | *** Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
| |
− | *** Data to Server: improved MQTT input connection handling
| |
− | *** DNP3 Client: added option to enable/disable service
| |
− | *** GRE: increased Inbound and Outbound key limit to 4294967295
| |
− | *** Input/Output: added custom name support in I/O status page
| |
− | *** IPsec: added certificate warning message
| |
− | *** Mobile Utilities: added interface option to sms_utils cellular command
| |
− | *** Mobile Utilities: improved error log message
| |
− | *** Mobile Utilities: improved naming of I/O pins in initial I/O status rule
| |
− | *** Mobile Utilities: sms utilities authentication brute force prevention
| |
− | *** Modbus Server: added mobile last month and last week usage registers
| |
− | *** Modem Control: disabled canonical mode by default for partial mode. Now full/partial mode input from serial port works the same way
| |
− | *** Mosquitto: added large package size check for MQTT clients
| |
− | *** MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
| |
− | *** MQTT Publisher: improved MQTT connection handling
| |
− | *** OPC UA Client: added security modes
| |
− | *** OPC UA Server: added security modes
| |
− | *** OPC UA Server: added service status display
| |
− | *** OpenVPN: added support for decrypting private key when uploading a configuration file
| |
− | *** OpenVPN: improved instance status state
| |
− | *** OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
| |
− | *** Over IP: added label to show how many servers a client is connected to
| |
− | *** Over IP: connect on data feature will not disconnect immediately after data transfer but wait for inactivity timeout
| |
− | *** Over IP: increased TLS handshake timeout to 10 seconds
| |
− | *** SMPP: added brute-force prevention
| |
− | *** SMPP: added TLS/SSL support
| |
− | *** SMS Utilities: added security warning in "Authorization method" configuration
| |
− | *** SNMP: changed interface module OID structure
| |
− | *** SNMP: improved User-based Security Model (USM) brute force attack prevention measures
| |
− | *** Stunnel: improved global instance settings dependencies
| |
− | *** emailrelay: updated version to 2.4.1
| |
− | *** OpenVPN: updated version to 2.6.9
| |
− | *** stunnel: updated version to 5.72
| |
− | ** <b>System</b>
| |
− | *** Access Control: added certificate key length warnings
| |
− | *** Access Control: adjusted access control when all pages are blocked
| |
− | *** Access Control: added certificate file download for CLI to work on all browsers
| |
− | *** API Core: implemented functionality to include warning messages for vulnerable certificates
| |
− | *** Boot: improved modem startup reliability
| |
− | *** Package Manager: added multi package actions
| |
− | *** Package Manager: added status filter
| |
− | *** Package Manager: moved package upload action to main page
| |
− | *** Package Manager: added links to installed packages pages
| |
− | *** Package Manager: refactored "Packages" page
| |
− | *** Package Manager: updated opkg repository link to use https
| |
− | *** RutOS: improved GPL example page to align with new software architecture
| |
− | *** Troubleshoot: refactored Modem debug section to display responses in single field, added clear button to remove received responses
| |
− | *** Troubleshoot: added support for multiple syslog servers
| |
− | *** UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
| |
− | *** UI Core: added toast message hiding when text is too long
| |
− | *** Update Firmware: added 'Firmware version' data in screen after firmware upload
| |
− | *** WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
| |
− | *** WebUI: removed all ubus method calls from webui
| |
− | *** WebUI: improved language caching
| |
− | *** WebUI: added password generator for first login modal
| |
− | *** WebUI: added sticky position to side menu
| |
− | *** WebUI: added default password hint to login error message
| |
− | *** WebUI: added warning messages for low-security certificates
| |
− | *** Kernel: updated version to 5.4.276
| |
− | *** libexpat: updated version to 2.6.2
| |
− | *** SSL/TLS: updated version to 3.0.14
| |
− | *** vue: updated version to 3.4
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Devices: fixed missing API devices status endpoint permission
| |
− | *** DHCP: fixed "DHCP option" allow empty input value
| |
− | *** DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
| |
− | *** DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
| |
− | *** Dynamic routes: fixed duplicated external routes cards
| |
− | *** Firewall: fixed firewall zone validation when adding interfaces
| |
− | *** Mobile: fixed low signal reconnect being available on modems where it is not supported
| |
− | *** Mobile: fixed gsmctl -E output to return only json values
| |
− | *** Mobile: fixed Carrier Aggregation signal strength info
| |
− | *** Mobile: fixed wrong mobile data limit used data format for sms messages
| |
− | *** Mobile: fixed duplicate data connection event reporting
| |
− | *** Mobile: fixed an issue where low signal notifications were displayed without a SIM card
| |
− | *** Mobile: fixed modem serial number acquisition after modem reboot
| |
− | *** Mobile: fixed an issue when 4G-only network type selection may have resulted in a slower connection to the operator
| |
− | *** Mobile: fixed issue where USSD responses were returned in HEX format instead of text format for EC200A module
| |
− | *** Mobile: fixed issue where DHCP filter was not set correctly for RG501Q
| |
− | *** Mobile: fixed modem restart using gsmctl
| |
− | *** Mobile: fixed an issue where the wrong IP address was used after a DFOTA upgrade
| |
− | *** Network: fixed overriding MAC address for interfaces that are bridged
| |
− | *** Network: fixed not getting IP address when switching LAN to WAN
| |
− | *** Realtime Traffic: fixed mobile usage by week day translation by device language
| |
− | *** SQM: fixed missing PPP mobile device selection in SQM configuration
| |
− | ** <b>Services</b>
| |
− | *** BACnet: fixed incorrect BACnet IP port used for sending responses
| |
− | *** BGP: fixed route map sequence going out of range
| |
− | *** BGP: fixed listen range field allowing multiple entries
| |
− | *** Call Utilities: fixed table header switch to be disabled if no rules were created
| |
− | *** DLMS: fixed DLMS test response format
| |
− | *** DLMS: fixed COSEM group validation
| |
− | *** DLMS: fixed API POST error for /dlms/devices/config endpoint
| |
− | *** DLMS: fixed serial connection not working after reboot
| |
− | *** DNP3 Client: fixed to allow reading objects past 255 index
| |
− | *** DNP3 Client: fixed incorrect hints
| |
− | *** DNP3 Outstation: fixed serial outstation starting issues
| |
− | *** I/O Juggler: fixed improper dout action config handling
| |
− | *** I/O Juggler: updated profile change action
| |
− | *** Input/Output: allow unselecting all Post/Get access methods
| |
− | *** Input/Output: fixed issue when onewire configuration is not saved
| |
− | *** IPsec: fixed connectivity issues when using WAN failover
| |
− | *** IPsec: fixed the instance status when the local firewall option is disabled
| |
− | *** Ledman: fixed issue when after some time network type LED starts blinking
| |
− | *** Modbus Client: fixed test request option validation
| |
− | *** Modbus Client: fixed alarm output action display values
| |
− | *** Modbus Client: fixed incorrect period hint
| |
− | *** Modbus Server: fixed APN register not clearing APN
| |
− | *** Modbus Server: fixed 148 and 164 modbus registers
| |
− | *** Modbus Server: fixed incorrect hints
| |
− | *** Modem Control: fixed API POST request validation
| |
− | *** NTRIP: fixed NTRIP NMEA generation timestamp and coordinates errors
| |
− | *** NTRIP: fixed configuration reading with several instances added
| |
− | *** OPC UA Server: fixed not starting while modem is down
| |
− | *** OpenVPN: fixed displaying imported files from device
| |
− | *** OpenVPN: fixed the private key decryption for cases when a password is used
| |
− | *** OpenVPN: fixed data cipher migration
| |
− | *** Over IP: fixed issue where serial device does not recover after modem reboot
| |
− | *** Over IP: fixed connect on data initiating TCP connection after few data transfers
| |
− | *** Overview: fixed issue when devices without WiFi send additional request without data
| |
− | *** SMPP: fixed username bypass problem
| |
− | *** SMPP: fixed password validation
| |
− | *** SMS Gateway: fixed SMS to Email recipient formatting according to RFC5322
| |
− | *** SNMP: fixed GSM mSignal OID value type
| |
− | *** SNMP: fixed GSM module memory leaks
| |
− | *** SSTP: fixed functionality when the default route option is not enabled
| |
− | *** Web Filter: fixed whitelist not working for some hosts when using IPv6
| |
− | ** <b>System</b>
| |
− | *** Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
| |
− | *** API Core: fixed API method validation during upload action
| |
− | *** API Core: fixed error messages for POST method
| |
− | *** API Core: fixed option list validation
| |
− | *** Boot: fixed factory settings restore (firstboot) not deleting hidden files
| |
− | *** Events Log: fixed refresh button in event log table
| |
− | *** IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
| |
− | *** Recipients: made phone number field required
| |
− | *** Setup Wizard: fixed lan ip step not changing ip address
| |
− | *** Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
| |
− | *** Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
| |
− | *** Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
| |
− | * <b>CVE Patches</b>
| |
− | ** Patched CVE-2023-52425
| |
− | ** Patched CVE-2023-52530
| |
− | ** Patched CVE-2024-25629
| |
− | ** Patched CVE-2024-28757
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.3/TRB1/TRB1_R_00.07.07.3_WEBUI.bin TRB1_R_00.07.07.3]</span></b> | 2024.06.25===
| |
− | * <b>Fix</b>
| |
− | ** <b>System</b>
| |
− | *** FOTA: fixed config when upgrading from older firmware with keep settings
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31950
| |
− | ** CVE-2024-31951
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.2/TRB1/TRB1_R_00.07.07.2_WEBUI.bin TRB1_R_00.07.07.2]</span></b> | 2024.06.12===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Mobile: improved communication stability with eSIM
| |
− | ** <b>Services</b>
| |
− | *** SNMP: added bruteforce attack prevention when using SNMP v3 user
| |
− | *** L2TP: improved reconnect attempt logic
| |
− | ** <b>System</b>
| |
− | *** SSH: removed weak SSH algorithms
| |
− | *** Telnet: moved to Package Manager
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** BGP: fixed instance migration issues
| |
− | *** Mobile: fixed forced APN configuration
| |
− | ** <b>Services</b>
| |
− | *** DMVPN: fixed duplicate NHRP map entries creation
| |
− | *** OpenVPN: added fixes for the insecure tls-cert-profile option usage
| |
− | *** Serial: improved recovery from serial connection loss after modem reboot
| |
− | ** <b>System</b>
| |
− | *** IP Block: fixed blocking of UDP traffic
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2024-31948
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.7.1/TRB1/TRB1_R_00.07.07.1_WEBUI.bin TRB1_R_00.07.07.1]</span></b> | 2024.05.03===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** WebUI: added ESM/EMM message notifications
| |
− | *** WebUI: added internet status tracking configuration and overview widget
| |
− | *** LAN: added a new IPv6 LAN status page
| |
− | *** Static Leases: added a new IPv6 Static Leases page
| |
− | *** WebUI: added custom domain name resolve option in “DNS” configuration page
| |
− | *** Auto APN: added “uno.au-net.ne.jp” APN for “KDDI” operator
| |
− | *** Auto APN: added 'eprivate010.tisparkle.com' APN for “Sparkle” operator
| |
− | *** QoS: added mobile interface select option
| |
− | *** Mobile: improved connection establish time for uqmi protocol
| |
− | *** VRF: added initial Virtual Routing and Forwarding support
| |
− | ** <b>Services</b>
| |
− | *** Post/Get: added I/O invert support
| |
− | *** DLMS Client: added persistent TCP connections
| |
− | *** Events Reporting: added unexpected shutdown event
| |
− | *** Modbus Client: added 64bit data types
| |
− | *** IPerf3: added iPerf3 to Package Manager
| |
− | *** DNP3 Outstation: added I/O objects
| |
− | *** Modbus Serial Server: added option 'Mobile data type'
| |
− | *** TR-069: added PCI, LAC, TAC, EARFCN and Neighbour cells data to Device.MobileInfo node
| |
− | *** Over IP: added option 'Keep alive enable'
| |
− | ** <b>System</b>
| |
− | *** WebUI: added the ability to generate random passwords for password input fields
| |
− | *** WebUI: added reset to “Factory defaults” option
| |
− | *** System: changed firmware certificate verification tool
| |
− | *** IP Block: added time-based login attempt blocking
| |
− | *** WebUI: added firmware update notification support
| |
− | *** PAM: added the ability to set port for TACACS+
| |
− | *** Logging: added multiple remote syslog servers support
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Static Leases: added possibility to use MAC with wildcard
| |
− | *** WebUI: added ability to disable modem update notifications
| |
− | *** Topology: changed network devices scanning application
| |
− | *** WebUI: improved design of Status - LAN page
| |
− | *** DHCP: simplified DHCP configurations in other pages and moved full DHCP configuration to a separate page
| |
− | *** DHCP: removed default disabled server configuration for WAN interface
| |
− | *** WebUI: simplified data entry of DNS forwardings by separating hostname and IP address fields
| |
− | *** BGP: added Virtual Routing and Forwarding (VRF) support
| |
− | *** BGP: added multiple BGP instance support
| |
− | *** WebUI: adjusted responsive design breakpoints
| |
− | *** Dnsmasq: updated dnsmasq to version 2.89
| |
− | *** WebUI: added additional field for warning threshold to allow entering value as percentage in Mobile Data Limit section
| |
− | *** Mobile: improved mobile services stability when SIM card is lost during SMS sending
| |
− | *** Mobile: updated bridge/passthrough mode logic to flush ARP and add static ARP entry if MAC is specified
| |
− | *** Mobile: improved SIM switch logging and protection on failure to acquire data
| |
− | *** WebUI: added partial data loading to APN database page
| |
− | *** Mobile: improved SMS sending timeouts during network issues
| |
− | *** Mobile: improved connection handling when data limit is reached
| |
− | *** Mobile: added metric to default gateway when using passthrough mode
| |
− | *** WebUI: added validation for 2 same APNs
| |
− | *** WebUI: updated Band selection field to show duplex modes in Mobile General page
| |
− | ** <b>Services</b>
| |
− | *** Wireguard: added option to bind tunnel to a specific interface
| |
− | *** OPC UA Client: added limits (10 servers, 20 groups, 50 nodes per server, 50 values per group)
| |
− | *** DLMS Client: increased maximum count of connection sections to 30
| |
− | *** DLMS Client: added short name referencing
| |
− | *** SNMP: set strict default community access when IPv6 address is used
| |
− | *** SNMP: improved sysName OID to set device's hostname
| |
− | *** OpenVPN: added the bridge option for selecting the network device to be bridged with
| |
− | *** OpenVPN: added possibility to create more than one TAP client
| |
− | *** SSTP: updated package version to 1.0.19
| |
− | *** Mosquitto: updated package version to 2.0.17
| |
− | *** Auto Reply: added available SMS message parameters to "Message text" input
| |
− | *** Modbus Client: allow using diacritics in SMS alarms
| |
− | *** WebUI: added MAC authentication support when using RADIUS authentication mode
| |
− | *** WebUI: moved licenses to footer
| |
− | ** <b>System</b>
| |
− | *** WebUI: added more strict password requirements for restoring backup
| |
− | *** SMTP: added option to either not verify SMTP server or upload SMTP server's CA file to verify authenticity
| |
− | *** WebUI: Added the ability to choose the ROOT CA when using certificates from the device
| |
− | *** WebUI: unified time format to ISO8601 across the entire WebUI
| |
− | *** WebUI: added ability to choose imported certificate and key as 'Server certificate' and 'Server key' in 'Access Control'
| |
− | *** WebUI: added 'Hosts' and 'IP Addresses' options for 'Simple' certificate generation and certificate signing
| |
− | *** WebUI: changed firmware update option to server as a default option
| |
− | *** WebUI: improved first login password change logic
| |
− | *** Certificates: updated Root CA certificates
| |
− | *** GPL: added offline package preparation command for GPL builds
| |
− | *** Kernel: updated version to 5.4.269
| |
− | *** Libcap: updated package version to 2.69
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Topology: fixed showing interfaces with assigned VLAN
| |
− | *** WebUI: fixed static routing creation for GRE instance
| |
− | *** Network: fixed DHCPv4 relay mode enabling
| |
− | *** Mobile: fixed PIN code set after modem restart
| |
− | *** Mobile: fixed an issue where using SIM change command on one SIM slot modems would reset connection
| |
− | *** Mobile: fixed an issue where message storage would not be checked correctly
| |
− | *** Mobile: fixed temperature value sometimes returning 0
| |
− | *** Mobile: fixed denied roaming flag set
| |
− | *** Mobile: fixed issue where RSSI value was displayed as 0 when using 2G/3G network types
| |
− | ** <b>Services</b>
| |
− | *** Modbus Client: allow using negative floating point values in requests
| |
− | *** Azure IoT Hub: fixed Data to Server minor WebUI dependency bugs
| |
− | *** Data to Server: fixed DLMS data formating
| |
− | *** Data to Server: fixed Network link state data display
| |
− | *** DLMS Client: fixed segfault while reading profile generic COSEM object
| |
− | *** DLMS Client: fixed profile generic entries reading
| |
− | *** DLMS Client: fixed application memory allocation issues
| |
− | *** SSTP: fixed route adding when default route is enabled
| |
− | *** SNMP: fixed VLAN OID naming
| |
− | *** OpenVPN: added fixes for instance status tracking functionality
| |
− | *** OpenVPN: resolved uptime counting issues
| |
− | *** PPTP: fixed PPTP instance deletion problem
| |
− | *** UPnP: updated package version to 2.3.4
| |
− | *** Azure IoT Hub: fixed 'contentType' telemetry message parameter
| |
− | *** Modbus Client: fixed issue where service freezes when SMS alarm is sent
| |
− | *** Modem over serial: improved robustness against modem reboots
| |
− | *** Modbus TCP Over Serial Gateway: fixed gateway returning corrupted data with larger baud rates
| |
− | *** WebUI: fixed data loading error in Input/Output > Post/Get page
| |
− | *** MQTT Publisher: fixed device/router topic naming bug
| |
− | *** SNMP: fixed mobile connection uptime display
| |
− | ** <b>System</b>
| |
− | *** NTP Client: fixed ‘Count of time synchronizations’ execution when synchronization to mobile operator is chosen
| |
− | *** Package Manager: fixed spinner message when restarting network after package upload or download
| |
− | *** Package Manager: fixed supported devices check when installing a package from server
| |
− | *** WebUI: fixed language install from uploaded package after upgrade with keep settings
| |
− | *** WebUI: fixed an issue when a user was not logged out after changing profiles
| |
− | *** Telnet: fixed segmentation fault during concurrent connections
| |
− | *** CLI: fixed enter key issue on mobile chromium based browsers
| |
− | *** System Users: fixed SSH session close after deleting user or disabling SSH access
| |
− | *** Profiles: fixed profile migration with installed packages
| |
− | *** PAM: updated libpam to version 1.6.0
| |
− | * <b>CVE Patches</b>
| |
− | ** CVE-2022-4603
| |
− | ** CVE-2022-23308
| |
− | ** CVE 2022-45061
| |
− | ** CVE-2023-0466
| |
− | ** CVE-2023-6129
| |
− | ** CVE-2023-7042
| |
− | ** CVE 2023-24329
| |
− | ** CVE 2023-27043
| |
− | ** CVE-2023-42366
| |
− | ** CVE-2023-46218
| |
− | ** CVE-2023-46219
| |
− | ** CVE-2023-46752
| |
− | ** CVE-2023-46753
| |
− | ** CVE-2023-48795
| |
− | ** CVE-2022-4269
| |
− | ** CVE-2024-2397
| |
− | ** CVE-2024-25062
| |
− | ** CVE-2024-27913
| |
− | ** CVE-2024-22365
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.10/TRB1/TRB1_R_00.07.06.10_WEBUI.bin TRB1_R_00.07.06.10]</span></b> | 2024.04.04===
| |
− | * <b>Fix</b>
| |
− | ** <b>System</b>
| |
− | *** Ledman: fixed memory leak
| |
− | ----
| |
− | ===<b>TRB1_R_00.07.06.8</b> | 2024.03.25===
| |
− | Firmware <b>R_00.07.06.8</b> was removed due to an issue with inefficient memory allocation for LED control.
| |
− | * <b>New</b>
| |
− | ** <b>WebUI</b>
| |
− | *** Added eSIM support
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** IPSec: disabled libgmp in favor of openssl
| |
− | *** IPSec: updated Strongswan to 5.9.6
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** IPSec: increased charon load timeout
| |
− | *** IPSec: fixed loading of large private keys
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.6/TRB1/TRB1_R_00.07.06.6_WEBUI.bin TRB1_R_00.07.06.6]</span></b> | 2024.03.04===
| |
− | * <b>Improvements</b>
| |
− | ** <b>System</b>
| |
− | *** Minified *.svg WebUI files to save space on the device
| |
− | *** Removed unused easy-rsa package to increase free space
| |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed mobile daily data usage representation
| |
− | ** <b>Services</b>
| |
− | *** Fixed OverIP serial utility issue where after some time server mode can't accept incoming connections anymore
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.5/TRB1/TRB1_R_00.07.06.5_WEBUI.bin TRB1_R_00.07.06.5]</span></b> | 2024.02.21===
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Added support for multi line USSD
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Improved DMZ to use its source zone on port forwards creation
| |
− | ** <b>System</b>
| |
− | *** Updated netifd version to 2024-01-04
| |
− | *** Updated PPP package version to 2.4.9
| |
− | *** Updated E2fsprogs package version to 1.47.0
| |
− | *** Updated Musl package version to 1.2.4
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** Fixed Modbus TCP Over Serial Gateway crash occurring at start up in some edge cases
| |
− | *** Fixed issue of OPC UA Server service not launching
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed action descriptions in the traffic rules table
| |
− | *** fixed BACnet allow remote access functionality
| |
− | ** <b>System</b>
| |
− | *** Fixed year 2038 problem with time counter overflow
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.4/TRB1/TRB1_R_00.07.06.4_WEBUI.bin TRB1_R_00.07.06.4]</span></b> | 2024.01.18===
| |
− | * <b>Improvements</b>
| |
− | ** <b>Services</b>
| |
− | *** Increased DLMS Client connection timeout for TCP sockets
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** Fixed DLMS Client memory leak with profile generic COSEM class
| |
− | *** Fixed function 5 not working with high register numbers in MQTT Modbus Gateway service
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed Events Log sorting and search features
| |
− | ** <b>System</b>
| |
− | *** Patched CVE-2024-0193 vulnerability
| |
− | *** Patched CVE-2023-51779 vulnerability
| |
− | *** Updated OpenSSH to 9.6p1 version, fixed CVE-2023-51385 and CVE-2023-51384
| |
− | *** Fixed profile migrations, added error handling when trying to change profile while it is still applying
| |
− | ----
| |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6.2/TRB1/TRB1_R_00.07.06.2_WEBUI.bin TRB1_R_00.07.06.2]</span></b> | 2024.01.04===
| |
− | * <b>Fix</b>
| |
− | ** <b>Services</b>
| |
− | *** Fixed issue with NTPclient zombie processes
| |
− | ** <b>System</b>
| |
− | *** Fixed device resetting to a different password instead of unique default password inscribed on the device.
| |
| | | |
− | ===<b>TRB1_R_00.07.06</b> | 2023.12.20=== | + | ===<b>[[Media:TRB14X_R_00.02.03.1_WEBUI.bin|TRB14X_R_00.02.03.1]]</b> | 2020.05.15 === |
− | <b>Note:</b> Firmware version <i>TRB1_R_00.07.06</i> was removed due to an issue when resetting the device failed to revert the password to the specified unique code inscribed on the device.
| |
− | ----
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Enabled IPv6 by default for mobile interfaces
| |
− | *** Added operator blacklisting and whitelisting based on mobile country code
| |
− | *** Added SIM card not inserted event in Events Log
| |
− | ** <b>Services</b>
| |
− | *** Added OPC UA Server
| |
− | *** Added the ability to set port for TACACS+ in PAM service
| |
− | *** Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
| |
− | *** Added new alarm action "Ubus event" in Modbus Client services
| |
− | *** Added new input "Modbus alarms" in Data to Server service
| |
− | *** Added wget ping subtype support in Events Reporting service
| |
− | *** Added new I/O SNMP OID that returns numeric I/O state
| |
− | *** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
| |
− | *** Added TLS support for OverIP serial functionality
| |
− | *** Added CSD calls control in Modem Control functionality
| |
− | ** <b>WebUI</b>
| |
− | *** Added Tailscale VPN support
| |
− | *** Renewed user interface design
| |
− | *** Added network interface name change functionality
| |
− | *** Added indication when new modem firmware is available
| |
− | *** Added mobile connection establishment display in mobile status page
| |
− | *** Added default value for "Reset threshold" field in Low Signal Reconnect feature
| |
− | ** <b>System</b>
| |
− | *** Added ability to enable/disable SSH access for specific users in System Users
| |
− | *** API support
| |
| | | |
− | * <b>Improvements</b> | + | * New features: |
− | ** <b>Network</b>
| |
− | *** Disabled operator scan when SIM card is not inserted
| |
− | ** <b>Services</b>
| |
− | *** Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
| |
− | *** Added PKCS#12 certificate container authentication method in IPsec VPN
| |
− | *** Added TLV message_payload support for SNMP service
| |
− | *** Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
| |
− | *** Added possibility to assign mobile interface in SQM service
| |
− | *** Added additional anonymous phone number validation in Mobile Utilities service
| |
− | *** Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
| |
− | ** <b>WebUI</b>
| |
− | *** Improved Events Log page loading by adding asynchronous pagination
| |
− | *** Removed requirement for Diffie-Hellman parameters in OpenVPN service
| |
− | *** Added improvements for creating OpenVPN IPv6 configurations
| |
− | *** Added auto redirect after changing router's IP address or port
| |
− | *** Increased Data to Server service MQTT topic length limit to 65535 characters
| |
− | *** Added OSPF external routes section to Status page
| |
− | *** Moved device menu entry “Reboot” to header menu
| |
− | *** Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
| |
− | *** Updated Operator state field to show if modem is in limited service
| |
− | *** Combined Mobile Usage day, week, month and total pages into one
| |
− | *** Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
| |
− | *** Added message when SIM card requires PIN/PUK code in Status -> Mobile page
| |
− | ** <b>System</b>
| |
− | *** Added Mosquitto CVE patch 2023-28366
| |
− | *** Added Mosquitto CVE patch 2023-3592
| |
− | *** Updated cURL version to 8.4.0
| |
− | *** Updated kernel version to 5.4.259
| |
− | *** Added RMS data display to generated troubleshoot
| |
− | *** Added downloaded Package Manager packages list to generated troubleshoot
| |
− | *** Added process activity load list to generated troubleshoot
| |
− | *** Changed default OPKG feed to use Teltonika's URL
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed DMVPN firewall rule creation issues
| |
− | *** Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
| |
− | *** Fixed an issue with Manual APN connection making attempts too rapidly
| |
− | *** Fixed deny data roaming functionality when transitioning between roaming and home operator network
| |
− | *** Fixed network disconnection on mobile network detach and DHCP lease loss situations
| |
− | *** Fixed VoLTE configuration after modem reboot
| |
− | *** Fixed Mobile interface bridge and passthrough mode connectivity loss
| |
− | *** Fixed an issue where rarely PIN code would get removed after SIM switch
| |
− | *** Fixed mobile operator list being not updated after changes in WebUI
| |
− | ** <b>Services</b>
| |
− | *** Fixed SSH module enable in PAM service
| |
− | *** Added minimum free space check when saving logs to flash in Logging service
| |
− | *** Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
| |
− | *** Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
| |
− | *** Fixed VRRP instances advertising wrong virtual IPs
| |
− | *** Fixed Cumulocity app not sending any telemetry data
| |
− | *** Fixed Call Utilities failure when caller id is hidden during a call
| |
− | *** Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
| |
− | *** Fixed serial timeout not working in Over IP serial functionality
| |
− | *** Removed "Echo" option in Modbus TCP over Serial functionality
| |
− | *** Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
| |
− | *** Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed side menu style issues when Japanese language is used
| |
− | *** Fixed displaying of vendor names in Topology page
| |
− | *** Fixed language packs being selectable when still in Package Manager queue
| |
− | *** Added ability to configure IPv6 BGP peer
| |
− | *** Fixed realtime graphs responsive design issues
| |
− | *** Fixed modem updater legacy firmware flashing
| |
− | ** <b>System</b>
| |
− | *** Patched FRR CVE-2023-38406
| |
− | *** Patched FRR CVE-2023-38407
| |
− | *** Patched FRR CVE-2023-41358
| |
− | *** Patched FRR CVE-2023-41360
| |
− | *** Patched FRR CVE-2023-41909
| |
− | *** Patched FRR CVE-2023-47234
| |
− | *** Patched FRR CVE-2023-47235
| |
− | *** Patched OpenSSL CVE-2023-3446
| |
− | *** Patched OpenSSL CVE-2023-3817
| |
− | *** Patched LibXML2 CVE-2023-39615
| |
− | *** Patched LibXML2 CVE-2023-45322
| |
− | *** Patched FFMPEG CVE-2021-28429
| |
− | *** Patched FFMPEG CVE-2022-48434
| |
− | *** Patched dnsmasq CVE-2023-28450
| |
− | *** Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot
| |
− | | |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/TRB1/TRB1_R_00.07.05.4_WEBUI.bin TRB1_R_00.07.05.4]</span></b> | 2023.11.09===
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>WebUI</b>
| |
− | *** Improved asynchronous pagination in events log pages
| |
− | *** Optimized Overview page load
| |
− | *** Added resource loading cancellation after switching to different page
| |
− | | |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.2/TRB1/TRB1_R_00.07.05.2_WEBUI.bin TRB1_R_00.07.05.2]</span></b> | 2023.10.30===
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>System</b>
| |
− | *** Security improvements
| |
− | | |
− | ===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5/TRB1/TRB1_R_00.07.05_WEBUI.bin TRB1_R_00.07.05]</span></b> | 2023.10.09===
| |
− |
| |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
| |
− | *** Added "gamma" APN to auto-APN database
| |
− | *** Added "soracom.io" APN for Soracom operator to APN database
| |
− | *** Added "simbase" APN to auto-APN database
| |
− | *** Added "pnd" APN for Pond IoT to auto-APN database
| |
− | *** Added "spitfire1" APN for Spitfire operator to APN database
| |
− | *** New argument in "gsmctl" CLI command for Carrier aggregation
| |
− | *** Numeric mode support for modem AT commands
| |
− | *** Enabled dynamic MTU configuration on mobile interfaces by default
| |
− | ** <b>Services</b>
| |
− | *** DLMS Client package
| |
− | *** 7zip package
| |
− | *** TincVPN package
| |
− | *** Added router uptime and mobile connection uptime data parameters to SNMP
| |
− | *** Custom MQTT publisher/subscriber topics definition support
| |
− | *** Alternative configuration file upload support for MQTT Broker service
| |
− | *** Device Provisioning Service support for Azure IoT Hub service
| |
− | *** Added more mobile usage parameters to SNMP
| |
− | ** <b>WebUI</b>
| |
− | *** Firewall status page
| |
− | *** Page search feature
| |
− | *** Network Topology page
| |
− | *** "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
| |
− | *** Package Restore feature Enable/Disable option
| |
− | *** Hotspot client connection/disconnection trap option for SNMP service
| |
− | *** Added Events log trap option for SNMP service
| |
− | *** Confirm dialog when cancelling a verified package in Package Manager
| |
− | *** "Bridge ALPN" option for Bridge configuration in MQTT Broker service
| |
− | *** New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
| |
− | *** Specific firmware packages repository link in Package Manager page
| |
− | *** Ability to enter decryption passphrase for encrypted private keys
| |
− | *** "Reconnect" button in RMS page
| |
− | *** New event "Device startup completed" in Events Reporting service
| |
− | *** "Start up message" field for Modem control serial utility
| |
− | *** Modem Debug page
| |
− | *** APN database management page added to package manager
| |
− | *** Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script"
| |
− | *** Ability to unblock SIM card and insert SIM PIN in Overview page
| |
− | *** New SMS rules "Reset mobile connection" and "Reload config"
| |
− | *** "SMS limit clear due" display in Overview page
| |
− | *** Added modem temperature to System -> Status page
| |
− | *** New "Server+Client" work mode for OverIP Serial Utility
| |
− | *** New "Connect on data" action for OverIP Serial Utility
| |
− | *** Multiple Client instance support for OverIP Serial Utility
| |
− | ** <b>System</b>
| |
− | *** Mechanism to rebrand WebUI using GPL
| |
− | *** Possiblity to create web applications with closed-source GPL
| |
− |
| |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Moved FRR VTYSH package to package manager
| |
− | *** Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
| |
− | *** Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
| |
− | *** Improved auto APN selection
| |
− | *** SMS sending event is now logged into events log
| |
− | *** Improved roaming control
| |
− | *** Removed unused APN usernames and passwords from auto-APN database
| |
− | *** Added connection to the operator when no mobile interfaces are active
| |
− | *** Improved VoLTE management functions
| |
− | *** Improved cases where Low Signal Reconnect sometimes executed prematurely
| |
− | *** Improved wrong SIM PIN remove logic
| |
− | ** <b>Services</b>
| |
− | *** New reworked Data to Server
| |
− | *** UPNP moved to package manager
| |
− | *** Added IPv6 support for Modbus TCP Server/Client services
| |
− | *** Refactored Azure IoT Hub service
| |
− | *** Improved resiliency to timeouts in Modbus Client service
| |
− | *** Added PDU data type to Modbus read requests
| |
− | *** Added new formatters for MQTT alarms in Modbus Client service
| |
− | *** Added main section to make test functions independent in Modbus Client service
| |
− | *** Improved WAN IP register reading time in Modbus service
| |
− | *** Sped up default profile and profile template generation for Profiles functionality
| |
− | *** Optimized profile change time for Profiles functionality
| |
− | *** Added IPv6 support for Stunnel VPN
| |
− | *** Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
| |
− | *** Improved TCPdump by allowing to capture packets from any interface
| |
− | *** Added OSPF support for DMVPN
| |
− | *** Updated Hotspot password hashing to sha512
| |
− | *** A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
| |
− | *** Allowed connection to SMPP server using IPv6 address
| |
− | *** Extended IP unblock action functionality in SMS Utilities
| |
− | *** Increased allowed Email to SMS service message size to 61440 bytes
| |
− | *** Added I/O pin name to trap notification message
| |
− | ** <b>WebUI</b>
| |
− | *** Reorganized menu
| |
− | *** Updated header design
| |
− | *** Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
| |
− | *** Moved Interfaces IPv6 configuration into seperate tab
| |
− | *** Added client/server status information in OpenVPN instance overview page
| |
− | *** Added more IPv6 information to interface status in Interfaces page
| |
− | *** Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
| |
− | *** Disabled DHCPv6 interface editing while in basic mode
| |
− | *** Refactored custom DHCP options into seperate modal
| |
− | *** Added automatic start and end IP allocation for DHCP server configuration in Interfaces
| |
− | *** Added client/server status information in L2TP VPN page
| |
− | *** Added "MTU" field to L2TP client configuration page
| |
− | *** Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration
| |
− | *** Added more detailed IPsec VPN status information
| |
− | *** Encryption AES-256-CBC added as default in OpenVPN
| |
− | *** Added "Authentication algorithm" support to OpenVPN configuration with static key mode
| |
− | *** Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface
| |
− | *** Improved Hotspot landing page theme package removal
| |
− | *** Added upload and download theme functionality to Hotspot Landing page
| |
− | *** Improved ZeroTier VPN bridge configuration
| |
− | *** Added ability to adjust order of rules in Firewall page
| |
− | *** Added IPv6 RAW table to be displayed in Status -> Firewall
| |
− | *** Improved file upload component's visual appearance
| |
− | *** Change "Allow anonymous" option default value to 0 in MQTT Broker
| |
− | *** Added option to specify "Client ID" in MQTT Publisher
| |
− | *** Added functionality to select specific interface in Web Filter service
| |
− | *** Allowed to select FTP server subfolder in Traffic Logging service
| |
− | *** Renamed various service master/slave naming convention in config files, package names and webUI to client/server
| |
− | *** Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
| |
− | *** Updated Status -> Network -> Mobile page layout
| |
− | *** Added bandwidth, provider in Status -> Network -> Mobile page
| |
− | *** Added colors for signal strength values in Status -> Network -> Mobile page
| |
− | *** Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
| |
− | *** Refactored network type selection in Network -> Mobile -> General page
| |
− | *** Serving cell information is not returned anymore when SIM card is not inserted
| |
− | *** Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
| |
− | *** Added button in a Scanned operators table which allows to add an operator to the operator list
| |
− | *** Added search bar in Mobile Utilities -> SMS Utilities page
| |
− | *** Added SMS sent and limit count to Network -> Mobile -> General page
| |
− | *** Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3Ge configuration
| |
− | *** Added IPv6 support in OverIP serial utility
| |
− | ** <b>System</b>
| |
− | *** Updated kernel version to 5.4.251
| |
− | *** Updated UCI version to 2021-10-22
| |
− | *** Updated SSHFS version to 3.7.1
| |
− | *** Updated FRR suite to 8.4.2
| |
− | *** Updated cURL version to 8.2.0
| |
− | *** Updated TCPdump version to 4.99.4
| |
− | *** Updated C-ares version to 1.19.1
| |
− | *** Updated iproute2 version to 5.19.0
| |
− | *** Updated libubox package version to 2021-08-19
| |
− | *** Added CVE patch CVE-2023-2650
| |
− | *** Added additional firmware information in CLI prompt banner
| |
− | *** Connection mode LED now blinks on data transfer
| |
− | *** Changed "routername" to "devicename" in system config file
| |
− | *** Made all clients get disconnected out once dropbear service is disabled
| |
− | *** Improved firmware downgrade restrictions for certain regions
| |
− | *** Device name is now displayed in browser tab when in WebUI login page
| |
− | *** Added NF conntrack information in generated troubleshoot archive
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed UDP Broadcast Relay service crashing on start without physical network device
| |
− | *** Fixed SMS limit period migration
| |
− | *** Fixed SMS limit size breaking various functionality
| |
− | *** Fixed custom IPv6 DNS option not overriding default DNS from operator
| |
− | *** Fixed an issue with blacklist and whitelist connection
| |
− | *** Fixed multipart SMS handling
| |
− | *** Changed modem init behavior if Modem Control serial utility feature is enabled
| |
− | *** Fixed wrong SIM state display when SIM is fully blocked
| |
− | *** Fixed incorrect virginmobile APN MNC
| |
− | *** Fixed mobile operator scanning fault when no mobile interfaces are active
| |
− | *** Fixed mobile interfaces generating multiple events on mobile connection
| |
− | *** Fixed PDU SMS parsing when operator provides user data header in single part SMS
| |
− | *** Added scheduled data limit clear for inactive mobile interfaces
| |
− | *** Fixed modem temperature retrieval
| |
− | ** <b>Services</b>
| |
− | *** Fixed reconnecting to inactive connections for Modbus Server service
| |
− | *** Fixed Modbus Client response after reboot write request
| |
− | *** Fixed Modbus Server to show error when trying to get operator name without SIM
| |
− | *** Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
| |
− | *** Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
| |
− | *** Fixed WireGuard VPN endpoint resolving problem
| |
− | *** Peer cache is no longer deleted when ZeroTier service is restarted
| |
− | *** Fixed RMS data collection about the list of devices connected to WiFi
| |
− | *** Fixed showing incorrect Internet state in RMS
| |
− | *** Fixed WiFi client info display in RMS
| |
− | *** Implemented error handling when device is blocked or unrecognized by RMS
| |
− | *** Fixed L2TP client sometimes not adding routes on successful connection
| |
− | *** Fixed NTP time sync with browser functionality in some edge cases
| |
− | *** Fixed reinstalled packages" verification when device name is changed
| |
− | *** Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
| |
− | *** Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
| |
− | *** Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
| |
− | *** Fixed IPsec VPN connection problem with small lifetime values
| |
− | *** Fixed IPsec "Default Route" not working when Flow Offloading is enabled
| |
− | *** Fixed an issue where system directory could be used as a mount point in SSHFS service
| |
− | *** Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
| |
− | *** Fixed package installation process bug when packages have different architecture names
| |
− | *** Added "bearer token" authentication functionality in Dynamic DNS
| |
− | *** Fixed MQTT Broker "local_port" option keep settings migration
| |
− | *** Remove public keys when key-based authentication is disabled in Access Control
| |
− | *** Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
| |
− | *** Corrected SNMP MIB file syntax according to standards
| |
− | *** Fixed returned port count in SNMP
| |
− | *** Fixed disabled CLI remote access taking up a session slot
| |
− | *** Fixed received SMS messages parsing with trailing whitespaces
| |
− | *** Fixed VPN status rule message text in SMS Utilities
| |
− | *** Fixed data being lost when sending large packets to serial devices using OverIP serial utility
| |
− | *** Fixed OverIP possible serial device overflow and minor bugs
| |
− | *** More robust error recovery for RTU communication in Modbus Client service
| |
− | *** Fixed GRE VPN keepalive
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed empty events cards in Overview page when no content is available
| |
− | *** Fixed modal form inputs not clearing upon closing after nested modal is saved
| |
− | *** Fixed select menu closing when selecting custom option
| |
− | *** Fixed multi select expanding table row when adding new values
| |
− | *** Fixed global section caching after deleting a section in a table
| |
− | *** Fixed unpredictable search logic in tables
| |
− | *** Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
| |
− | *** Fixed STP enabling issue in Interfaces
| |
− | *** Fixed EIGRP status info in Dynamic Routes
| |
− | *** Fixed issue with custom DHCP options where you could not have multiple values per rule
| |
− | *** Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
| |
− | *** Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
| |
− | *** Fixed failing Firewall rules with united protocol formats
| |
− | *** Fixed zone select component not closing options menu when selecting an option in Firewall pages
| |
− | *** Fixed memory leak when cancelling file uploads on Chromium-based browser
| |
− | *** Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
| |
− | *** Fixed allowing IDs above 247 in Modbus Client service
| |
− | *** Fixed selecting SIM in Modbus Client service Alarms
| |
− | *** Fixed Modbus Alarm telephone number limit
| |
− | *** Fixed to show available options for test requests on error in Modbus Client service
| |
− | *** Fixed Modbus Alarm I/O pin display values
| |
− | *** Fixed issue when creating instance named "gre" does not show in GRE VPN
| |
− | *** Remote endpoint field now allows underscore character in IPsec VPN
| |
− | *** Fixed ZeroTier wrong service status display in Status -> Services
| |
− | *** Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
| |
− | *** Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
| |
− | *** Added fixes for key-direction missing problem when uploading OpenVPN config file
| |
− | *** Fixed login page read-only inputs after custom user logout
| |
− | *** Fixed issue when double clicking firmware upgrade cancel button returned error
| |
− | *** Fixed Package Manager prompt message to appear when package requires network restart
| |
− | *** Fixed showing in queue packages when they contained special symbols in the Package Manager page
| |
− | *** Fixed various visual Side Widget bugs
| |
− | *** Fixed Data to Server DNP3 filter from flash display
| |
− | *** Fixed incorrect source data displayed in Realtime Data -> Connections table
| |
− | *** Fixed memory expansion confirmation prompt title
| |
− | *** Fixed incorrect configuration saving in Hotspot 2.0 service
| |
− | *** Disabled password hashing for new user creation in Hotspot service
| |
− | *** Fixed Hotspot landing page themes saving bug
| |
− | *** Fixed test email sending to more than one recipient in Events Reporting page
| |
− | *** Fixed VLAN OID values in SNMP service
| |
− | *** Output proper error message in case of hardware not being supported in Firmware Upgrade
| |
− | *** Fixed being able to open side widget when user does not have read access
| |
− | *** Fixed profile creation when current configuration is not present
| |
− | *** Fixed wrong protocol data display in "Access control" page
| |
− | *** Fixed carrier aggregation information when no connection is made or SIM card is not inserted
| |
− | *** Changed representation of mobile cell ID from hexadecimal to integer type
| |
− | *** Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
| |
− | *** Fixed an issue where sometimes bands were not represented correctly on certain modems
| |
− | *** Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
| |
− | *** Fixed mobile pages throwing 404 error when modem disconnects
| |
− | *** Fixed WebUI showing mobile connection when no SIM card is inserted
| |
− | *** Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
| |
− | *** Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
| |
− | *** Fixed CD and DSR pin invert toggle display in Over IP serial utility
| |
− | *** Fixed error when user has no write permissions in Speed Test page
| |
− | ** <b>System</b>
| |
− | *** Patched CVE-2023-0386 vulnerability
| |
− | *** Patched CVE-2023-0464 vulnerability
| |
− | *** Patched CVE-2023-0465 vulnerability
| |
− | *** Patched CVE-2023-2602 vulnerability
| |
− | *** Patched CVE-2023-3772 vulnerability
| |
− | *** Patched CVE-2023-4128 vulnerability
| |
− | *** Patched CVE-2023-33476 vulnerability
| |
− | *** Patched CVE-2023-28484 vulnerability
| |
− | *** Patched CVE-2023-29469 vulnerability
| |
− | *** Patched CVE-2023-31490 vulnerability
| |
− | *** Patched CVE-2021-36369 vulnerability
| |
− | *** Patched CVE-2023-48174 vulnerability
| |
− | *** Delayed Custom Scripts execution on boot, after storage devices are mounted
| |
− | *** Fixed Custom Scripts permissions after save
| |
− | *** Changed certificate expiry calculation mechanism to fix Y2K38 bug
| |
− | *** Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
| |
− | *** Fixed Events Log database rotation to prevent log partition space exhaustion
| |
− | *** Fixed duplication and sorting of all events IDs in Events Log
| |
− | *** Fixed FOTA crash when current hours is with leading 0
| |
− | *** Fixed crontab job removal after disabling FOTA
| |
− | *** Changed Mosquitto build options to not include cJSON library
| |
− | *** Fixed device name resetting to default upon refresh in Administration
| |
− | *** Fixed log messages not showing sent SMS info
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04.5_WEBUI.bin|TRB1_R_00.07.04.5]]</b> | 2023.07.24===
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Added metric field support in BGP Route-maps page
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed an issue with MBN selection when device is started for the first time
| |
− | *** Fixed an issue where MBN activation would not be successful
| |
− | *** Fixed service provider parsing when operator does not provide all fields for Quectel modems
| |
− | *** Fixed modem not establishing mobile connection by failing to parse MBN list
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04.4_WEBUI.bin|TRB1_R_00.07.04.4]]</b> | 2023.06.26===
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Improved mobile operator query methods and operator name parsing in various services
| |
− | ** <b>Services</b>
| |
− | *** Improved UPNP lease file validation
| |
− | ** <b>System</b>
| |
− | *** Device name is now displayed in browser tab when in login page
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed long mobile operator list parsing for whitelist/blacklist functionality
| |
− | *** Patched CVE-2023-32233 vulnerability
| |
− | *** Fixed mobile subnet selection
| |
− | *** Fixed possibility to add a network that is not yet created on a firewall zone
| |
− | | |
− | ** <b>Services</b>
| |
− | *** Fixed connection establishment for RMS MQTT service
| |
− | *** Implemented partial restart when connection with RMS server fails
| |
− | *** Fixed device name resetting to default upon WebUI page refresh
| |
− | *** Fixed being able to set device name without passing validations
| |
− | *** Fixed WireGuard port change in firewall traffic rule when modifying instance port
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04.3_WEBUI.bin|TRB1_R_00.07.04.3]]</b> | 2023.05.11===
| |
− | | |
− | * <b>New</b>
| |
− | ** Initial support for EC25-J (Japan) modem
| |
− | | |
− | * <b>Improvement</b>
| |
− | ** <b>System</b>
| |
− | *** Removed SSH RSA key generation
| |
− | *** Added SSH ECDSA key generation
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed an issue with mobile when Call Utilities configuration is invalid
| |
− | *** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
| |
− | ** <b>Services</b>
| |
− | *** Fixed incorrect mobile data usage provided to RMS service
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04.2_WEBUI.bin|TRB1_R_00.07.04.2]]</b> | 2023.04.18===
| |
− | | |
− | * <b>New</b>
| |
− | ** nftables support
| |
− | | |
− | * <b>Improvement</b>
| |
− | ** <b>Network</b>
| |
− | *** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
| |
− | *** Improved SIM detection algorithm
| |
− | *** Improved Multi-APN connection establishment time
| |
− | ** <b>WebUI</b>
| |
− | *** Improved Overview page performance
| |
− | ** <b>System</b>
| |
− | *** Changed hostname to router name
| |
− | *** Updated OpenSSL to version 1.1.1t
| |
− | *** Updated CA certificates to version 20211016
| |
− | *** Updated libiwinfo to version 2022-08-19
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed IPv4, IPv6 mobile connection restarts
| |
− | *** Fixed operator scanning when mobile interface is disabled
| |
− | *** Fixed data limit and tracking when software flow offloading is enabled
| |
− | *** Added network reload call before bringing the mobile interface up
| |
− | *** Fixed PDP context authentication when using special characters
| |
− | ** <b>Services</b>
| |
− | *** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
| |
− | *** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
| |
− | *** Fixed event text for configurable inputs/outputs on I/O Juggler
| |
− | *** Fixed I/O PIN3 value not changing via MODBUS TCP
| |
− | *** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
| |
− | *** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
| |
− | *** Fixed OpenVPN keep alive setting migration issue
| |
− | *** Fixed PPTP server name setting migration issue
| |
− | *** Fixed missing WebUI issue caused by Email Relay installation
| |
− | *** Fixed NTP's Operator Station Synchronization memory leak issue
| |
− | *** Fixed test email validation
| |
− | ** <b>System</b>
| |
− | *** Fixed libcares vulnerability CVE-2022-4904
| |
− | *** Fixed frr vulnerability CVE-2022-37035
| |
− | *** Removed ability for non root users to edit scripts that get executed as root
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04.1_WEBUI.bin|TRB_R_00.07.04.1]]</b> | 2023.03.24===
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed Data Limit issue
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.04_WEBUI.bin|TRB1_R_00.07.04]]</b> | 2023.03.07===
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** <b>WebUI</b>
| |
− | *** Improved data persistence between page refreshes
| |
− | *** Improved page navigation behavior
| |
− | *** Improved redirect logic to open configuration edit modals
| |
− | *** Updated the 'Status -> Mobile' page
| |
− | *** Updated interface card in the Overview page
| |
− | *** Separated Sent and Received data bars on the chart in the Mobile Usage page
| |
− | ** <b>Network</b>
| |
− | *** Added an info message displayed when a faulty SIM card is inserted
| |
− | *** Added ResIOT operator's APNs to the APN database
| |
− | *** Improved mobile connection re-establishment after reboot
| |
− | *** Improved mobile connection recovery in cases where it was lost unexpectedly
| |
− | *** Improved 'Deny data roaming' operation when switching between operators
| |
− | ** <b>Services</b>
| |
− | *** Added MQTT support to I/O Juggler
| |
− | *** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
| |
− | *** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
| |
− | *** Added argument support for the 'Execute custom script' SMS rule
| |
− | *** Added a frequency option 'schedule' Modbus Master
| |
− | *** Added pagination to Events Reporting overview
| |
− | *** Added limit to Events Reporting rule list
| |
− | *** Added email logging for Events reporting
| |
− | *** 'Sync with browser' button in the NTP page now also synchronizes the time zone
| |
− | *** Added a limit of 30 for NTP instances
| |
− | *** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
| |
− | *** Added "make before break" option to IPsec configuration
| |
− | *** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
| |
− | *** Improved MODBUS Master connection handling to reduce connection count
| |
− | *** Updated modbus request error messages
| |
− | *** Added OpenVPN server ip block support
| |
− | *** Added MQTT support for MODBUS Master alarms
| |
− | *** Improved error messages in the Serial Utilities page
| |
− | ** <b>System</b>
| |
− | *** Added insufficient space error message to the FW upgrade page
| |
− | *** Updated bash to version 5.1.16
| |
− | *** Added detailed FW update failure error message to Events Log
| |
− | *** Improved firmware upload/validation error messages
| |
− | *** Updated Turkish language support
| |
− | *** Added protocol column to IP block page
| |
− | *** Added "vpns.log" file to the Troubleshoot package
| |
− | *** Added Wireguard tunnel information to the Troubleshoot package
| |
− | *** Updated default admin group access rights
| |
− | *** Updated DFOTA notification to show "More info" only when the update is forced
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed MAC address showing on mobile interfaces
| |
− | *** Fixed mobile cell ID displaying in hexadecimal
| |
− | *** Fixed mobile data limit card creation in the Overview page
| |
− | *** Fixed modem widget disappearing from the Overview page
| |
− | *** Fixed Services page not displaying data after Thingworx package is installed
| |
− | *** Added DNP3 to the 'Status > Services' page
| |
− | ** <b>Network</b>
| |
− | *** Fixed issue that caused DHCP leases failing to load
| |
− | *** Fixed interface creation logic so that no more than one mobile interface can be created
| |
− | *** Fixed interface priority change issue
| |
− | *** Fixed a Custom Firewall Rule editing issue
| |
− | *** Fixed DMZ configuration saving while it is disabled
| |
− | *** Fixed Port Scan script execution failure
| |
− | *** Fixed Firewall zone duplication issue
| |
− | *** Fixed call function when VoLTE is disabled
| |
− | *** Fixed VoLTE control when IMS is not enabled
| |
− | *** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
| |
− | *** Fixed APN authentication when using empty credentials
| |
− | *** Fixed manual APN selection from list
| |
− | ** <b>Services</b>
| |
− | *** Fixed I/O Scheduler overlapping instances issue
| |
− | *** Fixed Input/Output image pin colors
| |
− | *** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
| |
− | *** Fixed DNP3 serial master not working when Stop bits are set to 2
| |
− | *** Fixed DNP3 requests not deleting along with instance
| |
− | *** Fixed DNP3 memory leak occurring after spamming the test request button
| |
− | *** Fixed Serial Over IP related Firewall rule setting
| |
− | *** Added limitations on message size and quantity of email messages in Email to SMS
| |
− | *** Fixed SMTP HELLO value parsing issue
| |
− | *** Fixed SMS message window reset button
| |
− | *** Fixed not being able to save empty 'Message text' field in Auto Reply
| |
− | *** Fixed multi-part SMS concatenation
| |
− | *** Fixed multi-part SMS processing
| |
− | *** Fixed SMS error message on 'Mobile Data Reset' action
| |
− | *** Fixed Data To Server JSON format %n, %N and %s flag issues
| |
− | *** Fixed Events Reporting email data clean
| |
− | *** Fixed Events Reporting missing config selections
| |
− | *** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
| |
− | *** Fixed IPsec instance deletion after removing DMVPN package
| |
− | *** Fixed IPSec migration via Backup file when DMVPN is configured
| |
− | *** Fixed IPsec naming issue when the includes an equals sign
| |
− | *** Fixed L2TP client to use correct interface on failover events
| |
− | *** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
| |
− | *** Fixed MODBUS database size limiting issue
| |
− | *** Fixed MODBUS MQTT Gateway client ID input
| |
− | *** Fixed MODBUS TCP Slave RSSI value
| |
− | *** Fixed MODBUS test button returning errors when several non-connected devices are configured
| |
− | *** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
| |
− | *** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
| |
− | *** Fixed OpenVPN Static Key configuration saving by making Static key upload required
| |
− | *** Fixed OpenVPN TLS client creation issue while LAN is down
| |
− | *** Fixed Package Manager displaying non-existent packages
| |
− | *** Fixed Package Manager errors showing up after successful installations
| |
− | *** Fixed Periodic Reboot entry duplication after a power cycle
| |
− | *** Fixed PPTP 'Client to client' option not being applied after save
| |
− | *** Fixed receiving excessive device state emails after a reboot is initialized over RMS
| |
− | *** Fixed WebUI unavailability after unsuccessful package install
| |
− | ** <b>System</b>
| |
− | *** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
| |
− | *** Fixed bash vulnerability CVE-2022-3715
| |
− | *** Fixed CGI-IO file download vulnerability CVE-2022-38333
| |
− | *** Fixed libxml2 vulnerability CVE-2022-40304
| |
− | *** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
| |
− | *** Improved file upload logic
| |
− | *** Fixed GPL firmware compilation with selected Tinc package
| |
− | *** Fixed OpenVPN Static Key migration via keep settings issue
| |
− | *** Fixed NTP time zone name setting migration when the name contains whitespaces
| |
− | *** Fixed language setting issue
| |
− | *** Fixed integer validation on industrial services
| |
− | *** Fixed LED indications when PDP type is IPv6
| |
− | *** Fixed issues with PDP type and SMS limit period migration via keep settings
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.03.4_WEBUI.bin|TRB1_R_00.07.03.4]]</b> | 2023.02.09===
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Changed generic modem restart method
| |
− | *** Fixed mobile page VoLTE switching issues
| |
− | ** <b>Services</b>
| |
− | *** Sanitized tcpdump storage location
| |
− | ** <b>System</b>
| |
− | *** Fixed CVE-2023-32349 vulnerability
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.03.2_WEBUI.bin|TRB1_R_00.07.03.2]]</b> | 2023.01.13===
| |
− | | |
− | * <b>New</b>
| |
− | ** <b>System</b>
| |
− | *** Japanese language
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Optimized mobile netifd script installation
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed issue that caused the device to get stuck after a FW upgrade
| |
− | *** Shortened modem hang monitor timeout
| |
− | *** Fixed VLAN option setting when changing VLAN ID
| |
− | | |
− | ===<b>TRB1_R_00.07.03.1</b> | 2023.01.03===
| |
− | <b>Note:</b> Firmware version TRB1_R_00.07.03.1 was removed due to an issue with firmware upgrade on devices with EC20 and EC21-AU modems.
| |
− | | |
− | * <b>New</b>
| |
− | ** <b>Network</b>
| |
− | *** Firewall DMZ page
| |
− | ** <b>Services</b>
| |
− | *** Java package
| |
− | *** SFTP server support
| |
− | *** OPC UA client
| |
− | ** <b>System</b>
| |
− | *** Portuguese language
| |
− | *** Spanish language
| |
− | *** Turkish language
| |
− | *** Email Relay package
| |
− | ** <b>WebUI</b>
| |
− | *** New Web menu design
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** <b>Network</b>
| |
− | *** Optimized mobile netifd script installation
| |
− | *** Updated modem handling, attachment, tracking and connection establishment processes
| |
− | *** Added the possibility to select multiple ports in all firewall port fields
| |
− | *** Added 'Match' traffic by type option to firewall traffic rules
| |
− | *** Added DNS servers and routing table fields to the Wireguard page
| |
− | *** Improved generating network topology
| |
− | *** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
| |
− | *** Update Firewall Traffic Rules page with DSCP and MARK options
| |
− | *** Added keepalive, holdtime and connect timers to BGP configuration
| |
− | *** Added 'Use gateway metric' to network protocols web interface
| |
− | *** Added more DHCPv6 client events to system log
| |
− | *** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
| |
− | *** Added option to select subnet parameters in mobile Passthrough/Bridge modes
| |
− | *** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
| |
− | *** Added mobile connection state for IPv6
| |
− | ** <b>Services</b>
| |
− | *** Fixed relay state switching
| |
− | *** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
| |
− | *** Added I/O restart on configuration profile change
| |
− | *** Fixed I/O voltage range display for power socket pins
| |
− | *** Fixed SMNP OID for I/O state
| |
− | *** Fixed I/O Juggler SMS text message Save & Apply issue
| |
− | *** Added execute custom script SMS Utilities rule
| |
− | *** Added receiver and transceiver mode support to SMPP
| |
− | *** Added timezone synchronization with GSM operator option to NTP Client
| |
− | *** Updated Zerotier web interface
| |
− | *** Added IPsec Flush connection option on tunnel initialization
| |
− | *** Added MODBUS slave regfile validation
| |
− | *** Added delay, number of timeouts, always reconnect options to MODBUS Master service
| |
− | *** Added DMVPN Phase 2 and Phase 3 support
| |
− | *** Added synchronization counting to NTP client
| |
− | *** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
| |
− | *** Added 'Unregister' button to RMS page
| |
− | *** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
| |
− | *** Updated Zerotier package to version 1.10.1
| |
− | *** Added automatic package removal upon failed installation in Package Manager
| |
− | *** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
| |
− | *** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
| |
− | *** Updated sqm-scripts to version 1.5.1
| |
− | *** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
| |
− | *** Added monthly reboot option to periodic reboot function
| |
− | *** Added support for multiple custom option selection to SSTP configuration
| |
− | *** Added PKCS12 certificate chain support to OpenVPN
| |
− | *** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
| |
− | *** Added QoS selection to MQTT Modbus Gateway
| |
− | *** Improved RAM usage during upload and installation of packages via Package Manager
| |
− | *** Updated curl to version 7.86.0
| |
− | *** Added brute-force prevention measures to Post/Get
| |
− | *** Added automatic private and public key generation to Wireguard VPN
| |
− | *** Added multiple Remote source IP support to IPsec
| |
− | *** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
| |
− | *** Added functionality to rotate log file when log is saved to Flash memory
| |
− | *** Improved performance while fetching packages on repeat visits to the Package Manager page
| |
− | *** Updated kernel to version 5.4
| |
− | *** Added 'Use gateway metric' field to Interface configurations
| |
− | *** Added WoL action to SMS Utilities
| |
− | ** <b>System</b>
| |
− | *** Remove front-end certificate validation
| |
− | *** Improved LED indication functions
| |
− | *** Added a 'test mail' button to the Administration -> Recipients page
| |
− | *** Added option to clear blocked IPs in the Access Control page after reboot
| |
− | *** Updated Web Request-Response core logic
| |
− | *** Added certificate validation to all services that support certificate upload
| |
− | *** Updated URL protocol validations
| |
− | *** Removed profile update requests during Save & apply
| |
− | *** Optimized profile switching logic
| |
− | ** <b>WebUI</b>
| |
− | *** Added an indication to the Interfaces page that displays when data limit is enabled
| |
− | *** Added bootloader version to the Device section in the System page
| |
− | *** Added configuration page shortcuts to Overview page widgets
| |
− | *** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
| |
− | *** Updated network interfaces protocols web interface
| |
− | *** Updated 404 page to include navigation menu
| |
− | | |
− | * <b>Fix</b>
| |
− | ** <b>Network</b>
| |
− | *** Fixed modem communication validation
| |
− | *** Fixed connection establishment in IPv6 only mode
| |
− | *** Fixed memory leak pn Port Events
| |
− | *** Fixed SIM PIN persistent storing
| |
− | *** Fixed jumbo frames MTU issue
| |
− | *** Added the 'Any' choice to source & destination IP address field in NAT rule edit
| |
− | *** Fixed NHRP web interface issues
| |
− | *** Fixed WAN interface configuration interfering with LAN
| |
− | *** Fixed mdcollect memory leak issue
| |
− | *** Fixed data limit not resetting properly
| |
− | *** Fixed incorrect mobile data usage calculations for multiple day periods
| |
− | *** Fixed an Auto APN 'Keep settings' issue
| |
− | *** Fixed data counting after mobile data limit has been reached
| |
− | *** Fixed mobile band not setting correctly on first try
| |
− | *** Fixed incorrect data limit conditions causing unwanted SIM switches
| |
− | *** Fixed Passthrough DHCP lease time setting
| |
− | *** Fixed mobile bridge mode issue when no DNS servers are supplied
| |
− | *** Added new Operator Lists instance name validations
| |
− | *** Fixed mobile passthrough mode for single ethernet port devices
| |
− | *** Fixed a DHCPv6 client issue
| |
− | ** <b>Services</b>
| |
− | *** Fixed libxml2 vulnerability CVE-2022-40303
| |
− | *** Fixed an IPsec Phase one & two setting migration issue
| |
− | *** Removed unnecessary field from the Port Mirroring page
| |
− | *** Fixed UCI SMS Rule return message to display new changes
| |
− | *** Fixed DNP3 issues when asking for modem temperature
| |
− | *** Fixed base64 encoding of SMS messages when forwarding to HTTP
| |
− | *** Fixed SMS sending issues when using multiple APN
| |
− | *** Added Gateway modem option to IP Block and WoL in SMS Rule edit
| |
− | *** Fixed unblocking IP addresses with an SMS message
| |
− | *** Fixed Mobile Utilities page not load properly on some occasions
| |
− | *** Fixed dbus vulnerability CVE-2020-35512
| |
− | *** Fixed dnsmasq vulnerability CVE-2022-0934
| |
− | *** Fixed ext4 vulnerability CVE-2021-3428
| |
− | *** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
| |
− | *** Fixed libxm12 vulnerability CVE-2022-29824
| |
− | *** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
| |
− | *** Fixed MQTT DoS vulnerability CVE-2021-41039
| |
− | *** Fixed privoxy vulnerability CVE-2021-44542
| |
− | *** Fixed python3 vulnerability CVE-2022-42919
| |
− | *** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
| |
− | *** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
| |
− | *** Fixed CVE-2023-32350 vulnerability
| |
− | *** Fixed switching between RMS connection types while the device is unregistered
| |
− | *** Fixed reload issues in website blocking feature
| |
− | *** Fixed IPsec PSK secret required field validation
| |
− | *** Fixed bandwidth limiting after QoS is enabled for the first time
| |
− | *** Fixed Dropbear issues when logging in over IPv6
| |
− | *** Fixed Modbus status in Status -> Services page
| |
− | *** Fixed Azure IoT Hub application issues when sending large volumes of data
| |
− | *** Fixed Azure IoT Hub MQTT password validation
| |
− | *** Fixed DMVPN configuration migration issue
| |
− | *** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
| |
− | *** Fixed DMVPN IPsec connection issue
| |
− | *** Fixed DMVPN mobile interface 'Keep settings' migration issue
| |
− | *** Fixed Dynamic DNS long hostname text display issue
| |
− | *** Fixed Events Reporting memory leak issue
| |
− | *** Fixed Events Reporting not triggering after flipping an I/O slider
| |
− | *** Fixed FOTA cron job not starting after factory reset
| |
− | *** Fixed IPsec local firewall option parsing
| |
− | *** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
| |
− | *** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
| |
− | *** Fixed NTP pool hostname validation
| |
− | *** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
| |
− | *** Fixed OpenVPN configuration saving issue when using HMAC key authentication
| |
− | *** Fixed OpenVPN custom dev name transformation to correct format
| |
− | *** Fixed OpenVPN device name setting logic when uploading config from file
| |
− | *** Fixed OpenVPN instance status display
| |
− | *** Fixed OpenVPN TAP (bridged) configuration detection
| |
− | *** Fixed Qos configuration saving issue occurring after instance deletion
| |
− | *** Fixed RMS JSON incorrect WAN state and IP information
| |
− | *** Fixed RMS step access issue in the Setup Wizard page
| |
− | *** Fixed SNMP issues after reboot while using a Hotspot
| |
− | *** Fixed SNMP generating MIB files for devices in accordance with to their hardware
| |
− | *** Fixed SNMP traps not working after SNMP is installed from server
| |
− | *** Fixed SSTP client route creation issue
| |
− | *** Fixed UPNP secure mode not turning off issue
| |
− | *** Fixed Wireguard route to endpoint issue
| |
− | *** Fixed manual package installation for queued packages
| |
− | *** Fixed NAT Rules dependency from IPsec web instance
| |
− | *** Returned usleep utility
| |
− | *** Updated Australian and South African NordVPN server IP addresses
| |
− | ** <b>System</b>
| |
− | *** Fixed JSON key parsing; keys can now be any printable character sequence
| |
− | *** Fixed memory leak in 'session' module
| |
− | *** Fixed possible buffer overrun when IPsec tunnel is used
| |
− | *** Fixed passthrough/bridge mode binding to MAC
| |
− | *** Fixed connection mode LED not blinking on data transfer
| |
− | *** Fixed certificate signing issues
| |
− | *** Fixed Telnet, CLI access blocking after max invalid tries
| |
− | *** Fixed FW upgrade with 'Keep settings' while low free space is available
| |
− | *** Fixed backup file duplication issue
| |
− | *** Fixed network device handling in system
| |
− | ** <b>WebUI</b>
| |
− | *** Fixed file pretty name parsing
| |
− | *** Fixed side widget accessibility during first login
| |
− | *** Fixed file upload issues
| |
− | *** Fixed drag and drop issue in the Traffic Rules page
| |
− | *** Fixed protocol display in the overview of the Interfaces page
| |
− | *** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
| |
− | *** Fixed login errors after browser tab restoration
| |
− | *** Fixed redirect to newly set IP address after Interface configuration
| |
− | *** Fixed firmware upgrade verify spinner not closing
| |
− | *** Fixed an issue with file upload via drag and drop
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.7_WEBUI.bin|TRB1_R_00.07.02.7]]</b> | 2022.09.12===
| |
− | | |
− | * <b>Improvements:</b>
| |
− | ** Improved manual-auto connection mode
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed AT command for SMS storage usage
| |
− | ** Fixed CVE-2022-1012 memory leak vulnerability
| |
− | ** Fixed CVE-2022-37434 kernel vulnerability
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.6_WEBUI.bin|TRB1_R_00.07.02.6]]</b> | 2022.08.24===
| |
− | * <b>Improvements:</b>
| |
− | ** Added 'home.vodafone.de' APN
| |
− | ** Improved stability of device information storage
| |
− | | |
− | * <b>Fixes:</b>
| |
− | ** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
| |
− | ** Fixed VoLTE management
| |
− | ** Fixed OpenVPN tls-auth and tls-crypt option names
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.5_WEBUI.bin|TRB1_R_00.07.02.5]]</b> | 2022.08.12===
| |
− | | |
− | * Improvements:
| |
− | ** Updated curl to version 7.83.1
| |
− | ** Updated firmware validation error messages
| |
− | ** Added multiple source IP address support to the Port Forwards page
| |
− | ** Increased custom APN Username & Password field maximum length to 64 symbols
| |
− | ** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
| |
− | ** Improved mobile connection status handling
| |
− | | |
− | | |
− | * Fixes:
| |
− | ** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
| |
− | ** Fixed CVE-2022-30065 busybox vulnerability
| |
− | ** Fixed file upload path traversal
| |
− | ** Removed Data to Server limit to proccess less than 10 instances
| |
− | ** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
| |
− | ** Fixed OpenVPN dev setting logic
| |
− | ** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
| |
− | ** Fixed MAC and leasetime setting for Bridge & Passthrough modes
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.4_WEBUI.bin|TRB1_R_00.07.02.4]]</b> | 2022.07.20===
| |
− | | |
− | * Improvements:
| |
− | ** Added default password change warning message before firmware downgrade
| |
− | ** Extended time period for device to make connection to operator
| |
− | ** Reduced the number of modem reboots when changing mobile settings
| |
− | ** Reduced excessive log output when no SIM card is inserted
| |
− | ** Added modem restart prevention on modem init
| |
− | ** Added disable RPLMN option in the SIM section of the SIM card config
| |
− | | |
− | * Fixes:
| |
− | ** Fixed CVE-2022-2068 vulnerability
| |
− | ** Disabled autoconnect on stop-network call
| |
− | ** Fixed authorization issue on 2G/3G only service mode
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.3_WEBUI.bin|TRB1_R_00.07.02.3]]</b> | 2022.06.26===
| |
− | | |
− | * Improvements:
| |
− | ** Updated FSTools package to version 2022-05-03
| |
− | ** Added security headers to web requests
| |
− | ** Added ping to DNS IPv6 support
| |
− | ** Added modem reset to default state after device FW upgrade
| |
− | ** Modem init now checks NVRAM sensitive commands before setting
| |
− | ** GSM output was made consistent
| |
− | | |
− | * Fixes:
| |
− | ** Fixed CVE-2019-12900 libbz2 vulnerability
| |
− | ** Fixed behavior of some gsmctl commands
| |
− | ** Fixed CVE-2022-23303 hostapd vulnerability
| |
− | ** Fixed CVE-2022-29581 Linux kernel vulnerability
| |
− | ** Fixed CVE-2022-29458 ncurses vulnerability
| |
− | ** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
| |
− | ** Fixed band locking issue
| |
− | ** Added default VoLTE value
| |
− | ** Specified IP address family on operator control's ping to DNS feature
| |
− | ** Fixed possible firmware corruption when flashing via fastboot
| |
− | ** Fixed VoLTE management issue
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02.1_WEBUI.bin|TRB1_R_00.07.02.1]]</b> | 2022.06.06===
| |
− | | |
− | * Improvements:
| |
− | ** Improved GSM related messages in Troubleshoot logs
| |
− | | |
− | * Fixes:
| |
− | ** Fixed IGMP Proxy menu item not appearing after package installation
| |
− | ** Fixed default mobile network configuration generation
| |
− | ** Fixed MODBUS write requests and Mobile Utils option setting
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.02_WEBUI.bin|TRB1_R_00.07.02]]</b> | 2022.05.23===
| |
− | | |
− | * <b>New features</b>
| |
− | ** Overview side widget
| |
− | ** IGMP Proxy
| |
− | ** Privileged Access Management (PAM)
| |
− | ** AWS Greengrass support
| |
− | ** HTTPS certificate and key upload feature
| |
− | ** SSH public keys edit box
| |
− | ** License page
| |
− | ** DNP3 data for Data to Server
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Updated busybox to version: 1.34.1
| |
− | ** Updated curl to version 7.79.1
| |
− | ** Added iptables filter package for string filtering
| |
− | ** Added CHAP authentication for L2TP VPN
| |
− | ** Added IPv6 support for L2TPv3 VPN
| |
− | ** Added EAP-MSCHAPV2 authentication method for IPsec VPN
| |
− | ** Added IPv6 support to Auto Reboot
| |
− | ** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
| |
− | ** Updated SNMP version 5.9.1
| |
− | ** Added OpenSSL authentication options to SNMPv3
| |
− | ** Added support for OSPF redistribution options and OSPF neighbors
| |
− | ** Added password field to BGP Peers page
| |
− | ** Extended BGP "AS" field validation to accept integers up to 4294967295
| |
− | ** Added "DHE+RSA" to OpenVPN cipher selections
| |
− | ** Increased OpenVPN max password length from 128 bytes to 512 bytes
| |
− | ** Made HMAC key direction initial value dependent on the role of the instance (client or server)
| |
− | ** Made HMAC key and HMAC authentication key upload fields required
| |
− | ** Added DES to IPsec encryption algorithms selections
| |
− | ** Added special character support for CHAP secrets
| |
− | ** Added validation requirements for PPTP user list username field
| |
− | ** Added option to manually enter Public key in Wireguard configuration
| |
− | ** Made generating Wireguard keys possible only while in auto mode
| |
− | ** Added Events Log database to troubleshoot archive
| |
− | ** Added RFC1918 filter field
| |
− | ** Added the possibility to unblock multiple blocked devices at once
| |
− | ** Added 'Port' column to blocked login attempts table
| |
− | ** Added Speedtest server refresh
| |
− | ** Updated Speedtest server list
| |
− | ** Added asterisk option to Site Blocking
| |
− | ** Added MD5 and SHA256 checksums to package validation page
| |
− | ** Changed certificate requirements to only require client key file if client certificate is used
| |
− | ** Added pagination and data retention between table pages
| |
− | ** Added pagination functionality to tables when there are more than 10 records
| |
− | ** Improved table sorting by saving user provided sort settings in the browser
| |
− | ** Improved drag and drop functionality
| |
− | ** Added the possibility to drag and drop files onto upload components
| |
− | ** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
| |
− | ** Added 'Strict-Transport-Security' response header for HTTPS
| |
− | ** Added 'breadcrumbs' to modal windows
| |
− | ** Improved initial WebUI loading after login
| |
− | ** Added mobile bytes sent and bytes received SNMP OIDs
| |
− | ** Added mobile LED turn off feature ('System -> Administration' page)
| |
− | ** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
| |
− | ** Updated mobile usage data point calculation logic
| |
− | ** Added the possibility to manually enter operator number
| |
− | ** Improved obtain mobile cell ID process
| |
− | ** Added modem restart if SIM card is removed during APN database fetching process
| |
− | ** Added unauthorized call logging
| |
− | ** Added space character support in SMS commands
| |
− | ** Disabled SMS modem storage configuration form when SIM is not inserted
| |
− | ** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
| |
− | ** Added external modem SMS limit Overview card and widget
| |
− | ** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
| |
− | ** Added duplicate value check for list configuration options
| |
− | ** Changed mobile card instance design
| |
− | ** Fixed 'Mobile Data usage reset' SMS rule
| |
− | ** Fixed the default state parameter of SMS list POST/GET command
| |
− | ** Added I/O SNMP trap
| |
− | ** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
| |
− | ** Added device name parameter '%pc' to I/O Juggler
| |
− | ** Added CRC verification support to MODBUS and RS232
| |
− | ** Added RS232 signal line control support
| |
− | ** Added 'Max clients' field to RS232 configuration
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
| |
− | ** Fixed CVE-2022-28391 busybox vulnerability
| |
− | ** Fixed CVE-2018-16789 shellinabox vulnerability
| |
− | ** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
| |
− | ** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
| |
− | ** Fixed zlib backport security issue
| |
− | ** Fixed Wireguard firewall zone assignment
| |
− | ** Fixed queued packages disappearing from list after FW upgrade with keep settings
| |
− | ** Fixed error message display for multiple input validation rules
| |
− | ** Fixed incorrect DHCP validation range for start and limit fields
| |
− | ** Removed 'Bring up on boot' option from network interface configuration pages
| |
− | ** Fixed coma-separated DHCP options disappearing after save
| |
− | ** Fixed exclude and listen interfaces
| |
− | ** Fixed 'Use broadcast flag' option saving
| |
− | ** Fixed firewall zone assignment when creating new interfaces
| |
− | ** Fixed OpenVPN 'Netmask' and 'IP address' field validations
| |
− | ** Fixed OpenVPN TAP configuration saving issue
| |
− | ** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
| |
− | ** Fixed dynamic BGP route state display
| |
− | ** Fixed BGP peer enable in edit page
| |
− | ** Fixed issue when no L2TP client instance could be bound to IPsec
| |
− | ** Fixed firewall rule and zone behavior related to config section creation
| |
− | ** Added default value for L2TPv3 netmask, which is now written to config after save
| |
− | ** Fixed passthrough option saving to IPsec file
| |
− | ** Fixed DMVPN issue where instance configuration could not be saved
| |
− | ** Fixed Wireguard peer could not be saved issue
| |
− | ** Fixed NTP client time synchronization after factory reset
| |
− | ** Fixed device time display with selected time zone
| |
− | ** Fixed MODBUS TCP indexation missing bracket issue
| |
− | ** Fixed initial MODBUS TCP request count validation
| |
− | ** Fixed PIN 3/4 direction switching over MODBUS TCP
| |
− | ** Fixed MODBUS data to MQTT socket closing issue when connection fails
| |
− | ** Fixed MODBUS alarm configuration deletion
| |
− | ** Fixed DNP3 master not working after FW upgrade with 'keep settings'
| |
− | ** Fixed DNP outstation not returning error messages
| |
− | ** Added missing SNMP objects: mobile IP, data sent/received today
| |
− | ** Fixed MQTT Publisher 'Remote address' field validation
| |
− | ** Fixed long interface name support for Azure IoT Hub
| |
− | ** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
| |
− | ** Fixed missing sent/received data issue
| |
− | ** Fixed URL input field length validation
| |
− | ** Fixed admin login issue after upload of backup from a device with older firmware versions
| |
− | ** Fixed MAC address formatting in Events reporting messages
| |
− | ** Fixed Events reporting DHCP lease message spam, when no new lease is added
| |
− | ** Fixed logging crashing after downloading Troubleshoot file
| |
− | ** Made Wake on LAN visible only on devices with Ethernet ports
| |
− | ** Fixed Traffic log file transfer to FTP server
| |
− | ** Fixed Web Filter service reloading after a host list file is uploaded
| |
− | ** Fixed access denied messages when sending JSON-RPC requests from root user
| |
− | ** Fixed error message display about duplicated intervals in Profile scheduler
| |
− | ** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
| |
− | ** Corrected OSPF Routing card values, value positions and names
| |
− | ** Fixed global secret instances not being removed when there are no IPsec instances
| |
− | ** Fixed uploaded file remove icon not staying in position on hover
| |
− | ** Fixed Overview card collapse issue that made it unresponsive after too many clicks
| |
− | ** Removed WAN6 interface from the Overview page
| |
− | ** Fixed mobile IPv6 display in Events Reporting status messages
| |
− | ** Fixed Bridge mode when DNS2 is not available
| |
− | ** Fixed PAP/CHAP username and password fields not saving in interface edit window
| |
− | ** Fixed sending email without secure connection for providers that support such an option
| |
− | ** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
| |
− | ** Fixed Call Utilities Events Log message for reboot rule
| |
− | ** Fixed SMS command validation for no-authorization option
| |
− | ** Fixed MODBUS SMS alarms 'Enable' option saving
| |
− | ** Fixed running RMS with no SIM card inserted issue
| |
− | ** Fixed firmware available on server version checking issue
| |
− | ** Fixed CVE-2020-15078 openvpn vulnerability
| |
− | ** Fixed storage calculation for packages
| |
− | ** SMS Utilities: enhanced service security
| |
− | ** Fixed firmware deletion after leaving the page
| |
− | ** Fixed setup wizard redirect after LAN IP change
| |
− | ** Fixed various validation bugs, typos, option hints & alignments
| |
− | ** Fixed multiple IPv6 configuration field validations
| |
− | ** Fixed relay output value display in I/O Juggler condition page
| |
− | ** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
| |
− | ** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
| |
− | ** Fixed I/O Juggler's incorrect I/O status messages
| |
− | ** Fixed automatic port open after RS232 Over IP server & bidirect configuration changes
| |
− | ** Removed MAC address display from the 'System information' page
| |
− | ** Fixed a browser console error display issue
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.01.4_WEBUI.bin|TRB1_R_00.07.01.4]]</b> | 2022.02.25===
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Increased Port Forwards rule max name length
| |
− | ** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
| |
− | ** Improved RS232 Port and Timeout validation
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Added missing bracket to the end of MODBUS messages
| |
− | ** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
| |
− | ** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
| |
− | ** Fixed firewall extra option validation
| |
− | ** Fixed usage of custom headers in I/O Juggler HTTP action
| |
− | ** Fixed 'verify' option parsing for I/O Juggler
| |
− | ** Changed the logic of uploading files to the modem
| |
− | ** Fixed OpenVPN server configuration with password authentication
| |
− | ** Fixed NTP interval length validation
| |
− | ** Fixed network interface enable after Drag & Drop
| |
− | ** Updated NTP client interval to 24h
| |
− | ** Fixed connection to whitelist carriers
| |
− | ** Fixed Passthrough mode when DHCP is disabled
| |
− | ** Fixed 'Deny data roaming' feature
| |
− | ** Fixed mobile blocking dependency on region
| |
− | ** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.01.2_WEBUI.bin|TRB1_R_00.07.01.2]]</b> | 2022.01.04===
| |
− | | |
− | * <b>New features</b>
| |
− | ** DFOTA modem upgrade system for Quectel modems
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Removed L2TP section title prefixes
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed IPSec crashing issue using mobile
| |
− | ** Fixed FW flashing when chip is in unknown state
| |
− | ** Fixed CPU usage percentage display in the Overview page
| |
− | ** Fixed FOTA timeout issue when server does not respond
| |
− | ** Fixed installation of backup packages
| |
− | ** Fixed mobile data limit display after profile change
| |
− | ** Fixed Bridge mode without multi-APN
| |
− | ** Fixed multi mobile interface checking
| |
− | ** Fixed error handling when the modem is not responding
| |
− | ** Prolonged autoconnect setting timeout
| |
− | | |
− | ===<b>TRB1_R_00.07.01</b> | 2021.11.18===
| |
− | <b>Note:</b> Firmware version TRB1_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
| |
− | ----
| |
− | * <b>New features</b>
| |
− | ** EC25-AU support
| |
− | ** Tinc VPN
| |
− | ** German language support
| |
− | ** Manual-Auto operator select
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Updated base to OpenWrt version 21.02
| |
− | ** Improved WebUI functionality when multiple browser tabs are open
| |
− | ** Updated mtd-utils to version 2.1.2
| |
− | ** Updated busybox to version 1.33.1
| |
− | ** Updated ubus to version 2021-06-3
| |
− | ** Updated ubox to version 2020-10-25
| |
− | ** Updated rpcd to version 2021-03-11
| |
− | ** Updated opkg to version 2021-06-13
| |
− | ** Updated fstools to version 2021-01-04
| |
− | ** Updated wwan to version 2019-04-29
| |
− | ** Updated ethtool to version 5.10
| |
− | ** Updated uhttpd to version 2021-03-21
| |
− | ** Updated ppp to version 2020-10-03
| |
− | ** Updated odhcpd to version 2021-07-18
| |
− | ** Updated hostapd to version 2020-06-08
| |
− | ** Updated dropbear to version 2020.81
| |
− | ** Updated dnsmasq to version 2.85
| |
− | ** Updated netifd to version 2021-07-26
| |
− | ** Updated firewall3 to version 2021-03-23
| |
− | ** Updated libjson-c to version 0.15
| |
− | ** Updated libevent2 to version 2.1.12
| |
− | ** Updated mac80211 to version 5.10.42-1
| |
− | ** Updated wireless-regdb to version 2021.04.21
| |
− | ** Updated binutils to version 2.35.1
| |
− | ** Updated gdb to version 10.1
| |
− | ** Updated strace to version 5.10
| |
− | ** Updated trace-cmd to version 2.9.1
| |
− | ** Updated valgrind to version 3.16.1
| |
− | ** Updated ath10k-ct-firmware to version 2020-11-08
| |
− | ** Updated procd to version 2021-02-23
| |
− | ** Updated iw to version 5.9.8
| |
− | ** Updated iproute2 to version 5.11.0
| |
− | ** Updated iptables to version 1.8.7
| |
− | ** Updated nettle to version 3.6
| |
− | ** Updated libpcap to version 1.9.1 rel3
| |
− | ** Updated elfutils to version 0.180
| |
− | ** Updated cryptodev-linux to version 1.11
| |
− | ** Updated linux-firmware to version 20201118
| |
− | ** Updated util-linux to version 2.36.1
| |
− | ** Updated openwrt-keyring to version 2021-02-20
| |
− | ** Updated mtd to version rel26
| |
− | ** Updated fwtool to version 2019-11-12
| |
− | ** Updated ca-certificates to version 20210119
| |
− | ** Updated wireguard-tools to version 1.0.20210223
| |
− | ** Updated iwinfo to version 2021-04-30
| |
− | ** Updated ipset to version 7.6
| |
− | ** Updated gre to version rel12
| |
− | ** Updated wolfssl to version 4.7.0
| |
− | ** Updated ustream-ssl to version 2020-12-10
| |
− | ** Updated uclient to version 2021-05-14
| |
− | ** Updated readline to version 8.1
| |
− | ** Updated mbedtls to version 2.16.11
| |
− | ** Updated libusb to version 1.0.24
| |
− | ** Updated libunwind to version 1.5.0
| |
− | ** Updated libubox to version 2021-05-16
| |
− | ** Updated libnl-tiny to version 2020-08-05
| |
− | ** Updated libnftnl to version 1.1.8
| |
− | ** Updated libiconf-full to version 1.16
| |
− | ** Updated libbsd to version 0.10.0
| |
− | ** Updated gmp to version 6.2.1
| |
− | ** Updated ulogd to version rel6
| |
− | ** Updated sqm-scripts to version 1.5.0
| |
− | ** Updated ntpclient to version rel14
| |
− | ** Updated nmap to version 7.80
| |
− | ** Updated curl to version 7.77.0
| |
− | ** Updated zerotier to version 1.6.5
| |
− | ** Updated xtables-addons to version 3.13
| |
− | ** Updated xl2tpd to version 1.3.16
| |
− | ** Updated stunnel to version 5.59
| |
− | ** Updated strongswan to version 1.0.13
| |
− | ** Updated sstp-client to version 1.0.13
| |
− | ** Updated pptpd to version rel5
| |
− | ** Updated openvpn to version 2.5.3 rel2
| |
− | ** Updated ntpd to version rel3
| |
− | ** Updated net-snmp to version rel2
| |
− | ** Updated mosquitto to version 2.0.11
| |
− | ** Updated miniupnpd to version 2.2.1 rel 3
| |
− | ** Updated etherwake to version rel5
| |
− | ** Updated libzip to version 1.7.3
| |
− | ** Updated libgpg-error to version 1.39
| |
− | ** Updated glib2 to version 2.66.4
| |
− | ** Updated libnetfilter-conntrack to version 1.0.8
| |
− | ** Updated libnetfilter-log to version rel3
| |
− | ** Updated lzo to version rel4
| |
− | ** Updated nghttp2 to version 1.43.0
| |
− | ** Updated openvpn-easy-rsa to version 3.0.8 rel3
| |
− | ** Updated iperf to version rel2
| |
− | ** Updated iperf3 to version 3.10.1
| |
− | ** Updated e2fsprogs to version 1.45.6
| |
− | ** Updated fuse to version 2.9.9
| |
− | ** Updated udprelay to version 2020-02-26
| |
− | ** Updated qmicli to version 1.28.2
| |
− | ** Updated pcre to version 8.45
| |
− | ** Updated libsmpp34 to version 1.14.1
| |
− | ** Updated libiwinfo to version 2.1
| |
− | ** Added netifd library for additional information related to network interfaces
| |
− | ** Updated openssl to version 1.1.1l
| |
− | ** Updated privoxy to version 3.0.32
| |
− | ** Added ACL reload method for sessions
| |
− | ** Added 'Advertisement interval' field to the VRRP configuration window
| |
− | ** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client
| |
− | ** Added email user group validation for sendind test emails with Events reporting
| |
− | ** Added an event logging feature for Ping Reboot events
| |
− | ** Improved file/section deletion logic: now files are also deleted after deleting a related config section
| |
− | ** Improved package deletion logic
| |
− | ** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance
| |
− | ** Updated 'External system log server' field validation to accept IPv6 addresses
| |
− | ** Added redirect to Overview page after login
| |
− | ** Added WebUI session timeout after user inactivity
| |
− | ** Added placeholder text to dropdown menus
| |
− | ** Improved multi-select design and functionality
| |
− | ** Added Unix timestamp, local ISO time, UTC time to Modbus
| |
− | ** Added info message when selected file cannot be uploaded
| |
− | ** Improved IPsec throughtput
| |
− | ** Added IPSec "Compatibility mode" configuration support
| |
− | ** Made SNMP 'Community name' option editable
| |
− | ** Added the option to delete configurations to the SMS Utilities 'UCI' rule
| |
− | ** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration
| |
− | ** Added Lithuanian and Verizon APNs
| |
− | ** Added modem selection for the 'Send SMS' option in Auto Reboot settings
| |
− | ** Added the possibility to get total data usage value without specifying time interval via ubus
| |
− | ** Added I/O support to SNMP
| |
− | ** Removed ubus list method due to security reasons
| |
− | ** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender
| |
− | ** Removed search engine site crawling
| |
− | ** Improved IPSec "Local/Remote source" validation
| |
− | ** Added Firewall "all" and "custom" protocol options
| |
− | ** Added Backup file size limit of 2 MB
| |
− | ** Improved basic/advanced mode changing
| |
− | ** Improved Wireguard "IP Addresses" field validation
| |
− | ** Added language download support from language selection section
| |
− | ** Added PPTP "Client to client" configuration support
| |
− | ** Made DDNS "username", "password", "host" fields optional
| |
− | ** Added SSTP "Default route" configuration support
| |
− | ** Added SMS Limit hour, week day and month day support
| |
− | ** Added Passthrough "Leasetime" and "Unit" configuration support
| |
− | ** Added Call Utilities "Active Timeout" configuration support
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Made RMS 'Connect' button disabled when a connection attempt is already in progress
| |
− | ** Added validation for TLS Clients 'Private network' option
| |
− | ** Fixed the validation range for MTU fields
| |
− | ** Fixed removing firmware image file after leaving the fimware upgrade page
| |
− | ** Fixed network selection list for Traffic Logging - added all available LAN networks
| |
− | ** Fixed DHCP Options validation
| |
− | ** Fixed configuration profile date display
| |
− | ** Fixed blank page after invalid URL in login page
| |
− | ** Fixed TR-069 related firewall rule loading
| |
− | ** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration
| |
− | ** Fixed WebUI section toggle
| |
− | ** Fixed package installation modal layout
| |
− | ** Fixed current page values showing up in login page username field
| |
− | ** Fixed the possibility to create section with a name that is already in use in the same config file
| |
− | ** Fixed OpenVPN username and password deletion when deleting configuration instance
| |
− | ** Fixed session closing issue for the user whose password was just changed
| |
− | ** Updated MODBUS credential validation
| |
− | ** Updated MQTT credential validation
| |
− | ** Fixed DNS 'Rebind protection' setting when switch is disabled
| |
− | ** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560
| |
− | ** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities
| |
− | ** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page
| |
− | ** Fixed Reboot Scheduler not removing crontab file after disabling the rule
| |
− | ** Fixed OpenVPN 'Extra options' field validation to allow a space character
| |
− | ** Added table drag and drop functionality to the Firewall's Traffic Rules page
| |
− | ** Fixed DNP3 Outstation crash caused by non-void function returning no value
| |
− | ** Fixed RMS 'Copy' button functionality
| |
− | ** Fixed gsmd deamon crashing after modem restart
| |
− | ** Fixed gsm memory leak
| |
− | ** Fixed WCDMA band names for MEIG modules
| |
− | ** Fixed SMS Gateway loading screen issue when sending an SMS message
| |
− | ** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option
| |
− | ** Fixed rpcd memory leak issue
| |
− | ** Fixed network information gathering
| |
− | ** Fixed 3G LED not being active in 3G mode
| |
− | ** Fixed data limit accuracy issue
| |
− | ** Fixed MODBUS Serial Master crash when requesting a 4-byte datatype from a 2-byte data payload
| |
− | ** Added a check if DNP3 is installed for 'Serial type' option
| |
− | ** Fixed I/O Juggler hour condition interval issue
| |
− | ** Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page
| |
− | ** Patched CVE-2021-40528 vulnerability
| |
− | ** Patched CVE-2021-40490 vulnerability
| |
− | ** Patched CVE-2020-16120 vulnerability
| |
− | ** Fixed VLAN section creation
| |
− | ** Returned Interfaces "Port priority" option
| |
− | ** Fixed missing Content-Type header to initial WebUI response
| |
− | ** Fixed RIP information parsing in status page
| |
− | ** Fixed OpenVPN IPv6 netmask validation
| |
− | ** Fixed SNMP Trap Settings Host/IP field validation
| |
− | ** Fixed Cumulocity authentication reset
| |
− | ** Fixed Events Reporting rule saving
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.07.00.1_WEBUI.bin|TRB1_R_00.07.00.1]]</b> | 2021.09.02===
| |
− | | |
− | * <b>Fixes:</b>
| |
− | ** Fixed reboot on MBN configuration reload
| |
− | ===<b>[[Media:TRB1_R_00.07.00_WEBUI.bin|TRB1_R_00.07.00]]</b> | 2021.07.16===
| |
− | | |
− | * <b>New features</b>
| |
− | ** New WebUI based on Vue.js 2.6.12
| |
− | ** RutOS updated to OpenWrt 19.07.7 base
| |
− | ** DNP3 Master and DNP3 Oustation
| |
− | ** 'Restore to user's defaults' SMS Utilities rule
| |
− | ** 8021q VLAN support
| |
− | ** DHCP Relay AT command
| |
− | ** Enabled user-space watchdog
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Updated firewall to release 3
| |
− | ** Updated kernel to version 4.14.221
| |
− | ** Updated uhttpd to version 2020-10-01
| |
− | ** Updated xtables-addons to release 9
| |
− | ** Updated mwan to version 2.8.14
| |
− | ** Updated pcre to version 8.44
| |
− | ** Updated curl to version 7.74
| |
− | ** Updated sqlite to version 3.33
| |
− | ** Updated ncurses to version 6.2
| |
− | ** Updated OpenSSL to version 1.1.1k
| |
− | ** Added full MODBUS register address expansion specifier for Data to Server
| |
− | ** Added full MODBUS register address legend
| |
− | ** Added Client ID option for the MQTT protocol in Data to Server
| |
− | ** Improved Data to Server sleeping accuracy
| |
− | ** Improved Data to Server username validation; now space is allowed
| |
− | ** Added firmware version OID to the SNMP service
| |
− | ** Added IP address family option field to the SNMP page
| |
− | ** Added SNMPv6 section to the SNMP Communities page
| |
− | ** Renamed the 'System -> Users' page to 'System -> System Users'
| |
− | ** Moved password changing option to the 'System -> System Users' page
| |
− | ** Switched to ar8216 driver
| |
− | ** Added IPsec XAUTH support
| |
− | ** Improved OpenVPN updown, init scripts to write info about instance in JSON
| |
− | ** Added AES-256-GCM encryption support to OpenVPN
| |
− | ** Added extra configuration parameters to DMVPN
| |
− | ** Added PSK conversion to DMVPN and single PSK types
| |
− | ** Improved Package Manager package installation, deletion and dependencies
| |
− | ** Improved Package Manager download process over FOTA
| |
− | ** Added new Input/Output values manageable over RMS
| |
− | ** Added IPv6 traffic logging
| |
− | ** Made 'Network -> Failover' and 'Network -> Interfaces' page data draggable on multiple browsers
| |
− | ** Added Input/Output Post/Get URL parameter t_time changing delay and time to seconds or miliseconds
| |
− | ** Added message storage management by config value
| |
− | ** Improved QMI error handling and status tracking
| |
− | ** Turned on modem in preinit for correct power-on sequence
| |
− | ** Added Post/Get feature to turn mobile data on/off
| |
− | ** Added the possibility to use 2gonly/3gonly/4gonly arguments for cellular service command alongside current 2g/3g/lte arguments
| |
− | ** Added "Phone number" and "Message" fields for "Send SMS" option
| |
− | ** Excluded MAC address from Configuration Backup files
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Added glib2 patch to fix CVE-2019-13012 vulnerability
| |
− | ** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
| |
− | ** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
| |
− | ** Added Busybox patch to fix CVE-2018-1000500 vulnerability
| |
− | ** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
| |
− | ** Fixed Android clients IPsec MTU/MSS size
| |
− | ** Fixed wrong IPsec DPD value saving
| |
− | ** Changed IPsec PSK maximum length to 128 symbols
| |
− | ** Fixed SSTP remaining up after package removal
| |
− | ** Fixed DMVPN crypto_proposal write to config
| |
− | ** Fixed I/O Juggler's SMS sending to correct group
| |
− | ** Fixed I/O Scheduler's relay state issue
| |
− | ** Added I/O direction check while changing IOs via I/O Post/Get
| |
− | ** Fixed float endianness mismatch on some devices MODBUS TCP Master, MODBUS Serial Master
| |
− | ** Fixed UPnP issue that caused config changes to apply only after service restart
| |
− | ** Fixed WebUI files caching when upgrading firmware
| |
− | ** Fixed WebUI date display format
| |
− | ** Fixed MODBUS returning incomplete MAC address data
| |
− | ** Fixed depleting IPv6 RA timeout when the ISP doesn't send RA updates
| |
− | ** Added "Transaction timed out" error handling
| |
− | ** Fixed PPPOE connection loss when wrong session PADT packet arrives
| |
− | ** Added gcont object tracking and info update if this service is restarted
| |
− | ** Fixed default SMS storage
| |
− | ** Fixed SMS warning sending after Mobile Data Limit change
| |
− | ** Fixed DHCP relaying over mobile networks
| |
− | ** Changed PIN code maximum length to 8 symbols
| |
− | ** Fixed 'I/O status' message to include correct Input/Output name based on info in ubus ioman objects
| |
− | ** Fixed 'Over IP' serial type's UDP issue in client mode
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.02.06.1_WEBUI.bin|TRB1_R_00.02.06.1]]</b> | 2021.02.10===
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
| |
− | ** Fixed bootloop which sometimes occurred when no SIM card is inserted
| |
− | ** Fixed SSH reachable over SIM IP in early boot
| |
− | ** Fixed modem status after failed network scan
| |
− | ** Fixed mbncfg function and PIN check logic
| |
− | ** Fixed PPTP server interface naming
| |
− | ** Fixed correct client PPTP interface name selection for route creation
| |
− | ** Fixed adding helper to firewall's wan zone when enabling PPTP configuration
| |
− | ** Added package size checking when manually installing a package
| |
− | ** Fixed 'New Firmware Available' message display after firmware upgrade
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.02.06_WEBUI.bin|TRB1_R_00.02.06]]</b> | 2020.12.31===
| |
− | | |
− | * <b>New features</b>
| |
− | ** Operator Whitelist/Blacklist
| |
− | ** i2c-tools & spi-tools packages (possibility to control I/O pins on the PCB of the device)
| |
− | ** Web Filter
| |
− | ** Interface Based VLAN
| |
− | ** Partial and full modem control support from RS bus
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Updated base to OpenWrt 19.07.4
| |
− | ** Added Phone Groups as possible SMS recipients to SMS Post/Get
| |
− | ** Added PSK support for MQTT Broker/Publisher
| |
− | ** Changed Output Scheduler structure
| |
− | ** Removed limitation of one configuration per Input
| |
− | ** Added multiple modem support for TR-069
| |
− | ** Fixed parsing user uploaded custom OpenVPN configuration files containing carriage returns
| |
− | ** Added iptables conntrack flush on WAN Failover if IPsec is enabled
| |
− | ** Optimized package responsible for sending/receiving GRE Tunnel keepalive packets
| |
− | ** Added extra error checking to Package Manager when downloading packages
| |
− | ** Added data usage info for both SIM cards to RMS
| |
− | ** Added logging to syslog when Ping/Wget Reboot "Action" is set to 'None'
| |
− | ** Improved display of configuration tables when a lot of information is shown
| |
− | ** Renamed MODBUS strings to uppercase
| |
− | ** Added redirect to configuration page after a new configuration is created with the 'Add' button
| |
− | ** Added option to create a Configuration Profile from current configuration
| |
− | ** Added data validation to Profiles Scheduler fields
| |
− | ** Replaced the Firewall 'Helpers' page with conntrack helper configuration for each firewall zone
| |
− | ** Increased dynamic list maximum amount of values to 50
| |
− | ** Added the possibility to save email accounts without entering email username and password
| |
− | ** Unified device access password validations
| |
− | ** Expanded DDNS validation for domain input to accept emails
| |
− | ** Added SMS Utilities rule to reset mobile data usage for specified interface
| |
− | ** Improved SMS Utilities VPN status rule to support custom configurations
| |
− | ** Added SMS storage limit check after inserting a SIM card
| |
− | ** Changed modem name from primary to internal if device has only one built-in modem
| |
− | ** Improved SIM count check during init
| |
− | ** Added MTU option to 'Mobile' protocol configuration
| |
− | ** Added serial 1000000 bps baud rate option
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet
| |
− | ** Fixed occasions when error messages overlap buttons
| |
− | ** Fixed I/O state saving after revert back to original state
| |
− | ** Fixed IPsec connection after reboot
| |
− | ** Fixed bridged interface configuration for L2TPv3
| |
− | ** Removed trailing newlines in returned SNMP strings
| |
− | ** Fixed Events Reporting waiting to send email before rebooting
| |
− | ** Fixed MQTT MODBUS Gateway not working when topics have special characters
| |
− | ** Swapped pin3 and pin4 values in MQTT Publisher
| |
− | ** Added an 'IP4Table' option to advanced interface configuration
| |
− | ** Fixed an issue where User Scripts were being deleted after device reboot
| |
− | ** Fixed various WebUI validation bugs, typos, option hints & alignments
| |
− | ** Fixed a bug that caused an internal sever error after logging in with a username that contained special characters
| |
− | ** Fixed crashes that occur after configuration files are not correctly generated
| |
− | ** Fixed a Firewall Port Forwarding bug which caused an internal sever error when no 'Protocol' was selected
| |
− | ** Fixed changing WebUI mode bug while current page is accessed with POST method
| |
− | ** Fixed password allowed lengths and tooltips
| |
− | ** Fixed mountpoint display
| |
− | ** Removed non-supported SMS Utilities rules
| |
− | ** Fixed SMS sending to Phone Group on I/O event
| |
− | ** Changed device name in 'Status' message to configured name instead of the default one
| |
− | ** Added modem reinit after SIM card initialization failure
| |
− | ** Fixed SMS Limit checking when messages exceed the set SMS limit
| |
− | ** Moved 2-8 PDP contexts to 9-16 the 2-8 are necessary for SIM card MIB APNs
| |
− | ** Changed mobile interface subnet to /32
| |
− | ** Fixed modem SIM card checking
| |
− | ** Fixed multi SMS handling on SMS Limit
| |
− | ** Fixed Call Utilities multiple SMS sending per received call
| |
− | ** Fixed SMS storage limit check on device reboot
| |
− | ** Changed SNMP mSignal, mTemperature and numSatellities datatypes to correspond to devices' MIB files
| |
− | ** Fixed device Internet access issue when device is in mobile Passthrough mode
| |
− | ** Fixed access to device via USB when OpenVPN TAP is on
| |
− | ** Fixed serial over IP Bidirect mode issues
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.02.05.2_WEBUI.bin|TRB1_R_00.02.05.2]]</b> | 2020.11.19===
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Randomized the global rate limiter to mitigate "SAD DNS" attack
| |
− | | |
− | ===<b>[[Media:TRB1_R_00.02.05.1_WEBUI.bin|TRB1_R_00.02.05.1]]</b> | 2020.09.30===
| |
− | | |
− | * <b>New features</b>
| |
− | ** DLNA media server
| |
− | ** iptables NETMAP extension
| |
− | ** "Flush connections on" option for WAN Failover
| |
− | ** New firmware notifications
| |
− | ** Updated header logo from 'Teltonika' to 'Teltonika | Networks'
| |
− | ** USSD command support
| |
− | ** Time sync via network operator's station
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Improved WebUI page loading speed
| |
− | ** Added Basic/Advanced mode selection in Setup Wizard
| |
− | ** Added a dropdown with a search function for time zone selection
| |
− | ** Added "copy to clipboard" button in Cloud Solutions next to MAC and Serial
| |
− | ** Added option to send all Modbus records in one packet
| |
− | ** Disabled IPV6 services on LAN by default
| |
− | ** Added password hashing in Post/Get pages
| |
− | ** Added a warning message about rebooting the device while certificate files are being generated
| |
− | ** Added status option to uploaded custom OpenVPN configuration file
| |
− | ** No longer showing "Enable OpenVPN config from file" option if "Enable external Services" is selected
| |
− | ** Added some missing placeholder values
| |
− | ** Added warning message about unsaved changes when leaving Auto Reboot, Periodic Reboot, Wireless pages
| |
− | ** Added port selection to SSTP configuration
| |
− | ** Changed Periodic Reboot service name to Reboot Scheduler
| |
− | ** Added table row highlights on hover
| |
− | ** Changed section name from 'Email users' to 'Email accounts' in the Recipients page
| |
− | ** Added network interface automatic assignment to firewall zones when interface protocol is switched
| |
− | ** Adjusted Azure validations
| |
− | ** Adjusted Local/Remote subnet field validations
| |
− | ** Adjusted Hotspot field validations
| |
− | ** Unified VPN overview section option names and titles
| |
− | ** Removed mandatory requirements for inter-zone forwarding source & destination options in Firewall zone configuration
| |
− | ** Added placeholder values for drop down options in Routing pages
| |
− | ** Increased maximum package upload size
| |
− | ** Removed mobile interfaces from Hotspot configuration
| |
− | ** Added "Passthrough subnets" option to IPsec configuration page
| |
− | ** Added package size checking when installing packages via Package Manager
| |
− | ** Optimized switching between Basic and Advanced WebUI modes
| |
− | ** Added missing services to Events Reporting page when selected Event is "Config change"
| |
− | ** Improved general web design, ordering and positioning
| |
− | ** Added word wrap in the Unsaved Changes page
| |
− | ** Centered 'Apply' button in the Profiles page
| |
− | ** Hid network interfaces with DHCPv6 protocol in Overview page while in Basic WebUI mode
| |
− | ** Changed tcpdump "Select storage" option value from 'Internal storage' to 'RAM memory' in the System → Administration → Troubleshoot page
| |
− | ** Added more descriptive error messages when connection to FOTA server fails
| |
− | ** Updated "Local address" hint in l2tpv3 page
| |
− | ** Updated phone number placeholders to +37000000000
| |
− | ** Updated SMS rule descriptions related to phone numbers and email accounts
| |
− | ** Made SMS/Mobile data limit options always visible in Overview Setup page
| |
− | ** Added indications for which antenna connector is connected to which modem
| |
− | ** Adjusted Modem FW file validations
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed DDNS freeze issues
| |
− | ** Fixed Firewall Traffic Rules Source and Destination address field validations
| |
− | ** Started using more stable, builtin ar82xx switch driver
| |
− | ** Symlinking tty devices in one place
| |
− | ** Fixed period when sending packet curl timeouts in Modbus Data Sender
| |
− | ** Fixed "active SIM" register value retrieval after regression in Modbus TCP Slave
| |
− | ** Fixed Hotspot 'Trial access' function
| |
− | ** Fixed OpenVPN TLS Cipher display and added a limit to number of ciphers
| |
− | ** Fixed various WebUI validation bugs, typos & option hints
| |
− | ** Fixed DHCP lease range validation and value saving in Interfaces page
| |
− | ** Fixed error messages when creating interfaces with incorrect names
| |
− | ** Fixed various section toggling bugs
| |
− | ** Fixed username validation in SNMP page
| |
− | ** Fixed certificate file importing bugs & common name display in Certificates Manager page
| |
− | ** Fixed interface option related to IPv4 and IPv6 in Routing pages
| |
− | ** Fixed OpenVPN multi-line command that adds client specific parameters
| |
− | ** Fixed DHCP lease range validation in Basic mode
| |
− | ** Fixed incorrect sorting in dynamic tables
| |
− | ** Fixed routing table writing and deleting
| |
− | ** Fixed incorrectly displayed type when no protocol is selected
| |
− | ** Removed Wireguard interfaces from the Interfaces page
| |
− | ** Fixed SNMP user access mode display in SNMPV3 Users Overview page
| |
− | ** Fixed SNMP memory leak on chilli module
| |
− | ** Fixed MD5 and SHA256 checksum calculations
| |
− | ** Fixed DHCP-options field validation to allow separating parameters with commas
| |
− | ** Fixed Package Manager side menu entry updates right after package upload
| |
− | ** Fixed Wireguard port selection
| |
− | ** Fixed VPN zone status display
| |
− | ** Fixed lua errors when Start/End time option is empty
| |
− | ** Fixed incorrectly displayed OpenVPN protocol
| |
− | ** Fixed Lua errors in Profile Scheduler and Firewall Zones
| |
− | ** Removed <i>/log</i> folder from Troubleshoot file directories
| |
− | ** Fixed endless spinner when applying profiles
| |
− | ** Fixed nil value in the Traffic Logging page
| |
− | ** Fixed "Units" option dependency on "Enable DHCP" option in the Setup Wizard's LAN page
| |
− | ** Fixed redirecting to login page after factory setting restore (reset)
| |
− | ** Removed Unsaved Changes notification when downloading Troubleshoot/tcpdump files from the System → Administration → Troubleshoot page
| |
− | ** Vulnerability fixes for Package Manager and Certificates Manager pages
| |
− | ** Fixed Firewall zone placeholder (removed "-- Please select --" and left "Unspecified")
| |
− | ** Fixed update from server option in the Firmware page
| |
− | ** Added missing error messages when password is invalid in default password change page
| |
− | ** Fixed "Lease time" option in the Setup Wizard's LAN page
| |
− | ** Fixed error 500 when accessing Advanced pages while in Basic mode
| |
− | ** Increased allowed character lengths for MQTT Broker and Data to Server
| |
− | ** Fixed XSS vulnerabilities in package manager and package file upload pages
| |
− | ** Fixed incorrect OpenVPN configuration saving
| |
− | ** Fixed NHRP lua error
| |
− | ** Removed "Wireguard" from Status → Services display if it is not installed
| |
− | ** Fixed crashing issue when getting "SIM slot in use" satus value
| |
− | ** Fixed sending status SMS to other number
| |
− | ** Fixed "Change mobile settings" rule service setting
| |
− | ** Fixed SMS Forwarding To HTTP "URL" option validation
| |
− | ** Fixed Mobile Signal graph data display
| |
− | ** Changed message type from 'error' to 'info' from Auto Reply page
| |
− | ** Fixed manual operator selection validation
| |
− | ** Fixed mobile interface authentication settings reset after selecting auto APN mode
| |
− | ** Fixed libgsm password and serial authorization
| |
− | ** Added workaround for mobile to switch LAN port throughput problem for ath79 target
| |
− | ** Fixed Q-in-Q device display in Interface Physical Settings
| |
− | ** Removed rmnet0 (mobile) from Physical Interface selection options
| |
− | ** Filtered out rndis0 (usb) interfaces from Network → WAN page
| |
− | ** Fixed WebUI access denial when upgrading from old FW version
| |
− | ** Removed Hotspot 2.0 page
| |
− | ** Fixed RS232 configuration saving
| |
− | ** Fixed Firewall rule creation for RS232 when UDP protocol is selected
| |
− | | |
− | ===<b>[[Media:TRB14X_R_00.02.04.3_WEBUI.bin|TRB14X_R_00.02.04.3]]</b> | 2020.07.31===
| |
− | | |
− | * <b>New features</b>
| |
− | ** Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives
| |
− | ** Package signature check to verify that a package comes from Teltonika
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Updated APN database
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed CVE-2019-17367
| |
− | ** Fixed hiding of configuration pages that users of a specific group don't have read access to
| |
− | ** Fixed firmware upload script
| |
− | | |
− | ===<b>[[Media:TRB14X_R_00.02.04.1_WEBUI.bin|TRB14X_R_00.02.04.1]]</b> | 2020.07.02 ===
| |
− | | |
− | * <b>New features</b>
| |
− | ** Added 'Mobile Passthrough mode'
| |
− | ** Added mobile signal real-time graph
| |
− | ** Relay control to Call Utilities
| |
− | ** 'Certificates' page for generating and managing TLS certificates
| |
− | ** 'Drag & Drop' support for Overview page tables
| |
− | ** 'Speed Test' feature
| |
− | ** AVL I/O support
| |
− | ** Added JSON formatting option to Data to Server
| |
− | ** Added timeout and keep-connection options to Modbus TCP Slave
| |
− | ** During this release a new package was released - [[TRB142 Package Manager#Available packages|WireGuard]]
| |
− | | |
− | * <b>Improvements</b>
| |
− | ** Improved mobile interface creation
| |
− | ** Improved 'Profile Scheduler' with minute accuracy
| |
− | ** Reordered VPN configuration options
| |
− | ** Standardized section header styles
| |
− | ** Unified spelling of dropdown values
| |
− | ** Added information about 'Package Manager' packages before updating firmware
| |
− | ** Updated services management to Status → Services page
| |
− | ** Improved performance of firmware upgrades from server
| |
− | ** Improved security features related to file uploading and HTTP headers
| |
− | ** Changed RAM/flash memory units from MiB to MB
| |
− | ** Updated warning message and lease deletion message for static leasing
| |
− | ** Moved 'Country code' option to general tab
| |
− | ** General web responsiveness improvements
| |
− | | |
− | * <b>Fixes</b>
| |
− | ** Fixed eth0 interface display
| |
− | ** Fixed SDK firmware compilation
| |
− | ** Fixed eth0 interface display
| |
− | ** No longer load the rpcd module
| |
− | ** Removed incorrect SMS character counter from SMS Utilities page
| |
− | ** Fixed symlinking tty devices in one place
| |
− | ** Fixed validations and option saving in OSPF page
| |
− | ** Fixed various element positioning bugs on smaller screens
| |
− | ** Fixed switching to advanced mode notification when accessing non existing pages
| |
− | ** Fixed validations in Traffic Logging page
| |
− | ** Fixed showing failover section only for interfaces with failover rules
| |
− | ** Fixed static leases redirect after saving
| |
− | ** Fixed empty dropdown values in 'I/O juggler' and 'Network Shares'
| |
− | ** Fixed interface IP address validation in DDNS page
| |
− | ** Fixed various spelling mistakes
| |
− | ** Fixed broken address option in the 'Troubleshoot' page
| |
− | ** Fixed dropdown select element double clicking issue
| |
− | ** Fixed basic/advanced mode switching with Microsoft Edge browser
| |
− | ** Fixed firmware upgrading bug when LAN interface with a changed name exists
| |
− | ** Fixed redirecting to the 'Interfaces' page when mode is changed from basic to advanced and user is in the 'LAN' or 'WAN' pages
| |
− | ** Fixed validation of custom header in 'Data To Server' page
| |
− | ** Fixed "Type" option error in Failover page
| |
− | ** Updated username and password validations
| |
− | ** Fixed profile change action in 'I/O Juggler'
| |
− | ** Fixed bidirectional GPIO change feature
| |
− | | |
− | ===<b>[[Media:TRB14X_R_00.02.03.2_WEBUI.bin|TRB14X_R_00.02.03.2]]</b> | 2020.06.03 ===
| |
− | | |
− | * <b>New features</b>
| |
| ** Responsive WebUI design | | ** Responsive WebUI design |
| ** New Access Control window for managing IP access | | ** New Access Control window for managing IP access |
Line 2,477: |
Line 37: |
| ** NTPD version 4.2.8p14 | | ** NTPD version 4.2.8p14 |
| | | |
− | * <b>Improvements</b> | + | * Improvements: |
| ** Updated kernel to newest version (3.18.20-msm) from QuecOpen SDK and clean up patches | | ** Updated kernel to newest version (3.18.20-msm) from QuecOpen SDK and clean up patches |
| ** Added HMAC configurations for OpenVPN | | ** Added HMAC configurations for OpenVPN |
Line 2,491: |
Line 51: |
| ** Added pin information for iostatus SMS rule | | ** Added pin information for iostatus SMS rule |
| ** Removed modem traps if no modem is present | | ** Removed modem traps if no modem is present |
− | ** Optimized section toggling logic, removing all toggling associated flags required prior optimization | + | ** Optimised section toggling logic, removing all toggling associated flags required prior optimisation |
| ** Standardized section edit page headers in WebUI Services | | ** Standardized section edit page headers in WebUI Services |
| ** Improved the look of error pages and messages | | ** Improved the look of error pages and messages |
Line 2,512: |
Line 72: |
| ** Fixed grammar errors in Mobile page | | ** Fixed grammar errors in Mobile page |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
| ** Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display | | ** Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display |
| ** Added validation for GRE 'Remote subnet IP' option | | ** Added validation for GRE 'Remote subnet IP' option |
Line 2,552: |
Line 112: |
| ** Fixed factory reset script which used to fail when SMS limit database is not initialized | | ** Fixed factory reset script which used to fail when SMS limit database is not initialized |
| | | |
− | ===='''TRB1420_R_00.01.06.1''' | 2019.12.19 ====
| + | ==='''[[Media:TRB1420 R 00.01.06.1.bin|TRB1420_R_00.01.06.1]]''' | 2019.12.19 === |
| | | |
| * New: | | * New: |
Line 2,568: |
Line 128: |
| ** Auto-APN | | ** Auto-APN |
| | | |
− | * <b>Improvements</b> | + | * Improvements: |
| ** WebUI style improvements | | ** WebUI style improvements |
| ** I/O POST/GET, Output Scheduler | | ** I/O POST/GET, Output Scheduler |
Line 2,575: |
Line 135: |
| ** Changed GPIO direction and state SMS rules | | ** Changed GPIO direction and state SMS rules |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
| ** Added default device name | | ** Added default device name |
| ** Access control fixes | | ** Access control fixes |
| ** Fixed RMS download, upload and data sending while connecting | | ** Fixed RMS download, upload and data sending while connecting |
| | | |
− | ===='''TRB1420_R_00.01.05''' | 2019.09.30 ====
| + | ==='''[[Media:TRB1420 R 00.01.05.bin|TRB1420_R_00.01.05]]''' | 2019.09.30 === |
| | | |
| * New: | | * New: |
| ** Firewall sync with upstream | | ** Firewall sync with upstream |
| | | |
− | * <b>Improvements</b> | + | * Improvements: |
| ** Improved partition checking logic | | ** Improved partition checking logic |
− | ** Upgraded modem firmware
| |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
− | ** Removed alsa-intf dependency | + | ** Removed alsa-intf dependancy |
| ** Disabled DROP SSDP rules | | ** Disabled DROP SSDP rules |
| ** Fixed invalid magic number message | | ** Fixed invalid magic number message |
Line 2,598: |
Line 157: |
| ** Fix not showing I/O (dwi, relay, input) content in certain devices | | ** Fix not showing I/O (dwi, relay, input) content in certain devices |
| | | |
− | ===='''TRB1420_R_00.01.04.1''' | 2019.08.02 ====
| + | ==='''[[Media:TRB1420 R 00.01.04.1.bin|TRB1420_R_00.01.04.1]]''' | 2019.08.02 === |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
| ** Input/Output related fixes | | ** Input/Output related fixes |
| | | |
− | ===='''TRB1420_R_00.01.04''' | 2019.07.15 ====
| + | ==='''[[Media:TRB1420 R 00.01.04.bin|TRB1420_R_00.01.04]]''' | 2019.07.15 === |
| | | |
− | * <b>New features</b> | + | * New features: |
| ** Added Input/Output configuration and overview page | | ** Added Input/Output configuration and overview page |
− | ** Added I/O status management SMS Utilities rules | + | ** Added I/O status managememt SMS Utilities rules |
| | | |
− | ===='''TRB1420_R_00.01.03''' | 2019.06.14 ====
| + | ==='''[[Media:TRB1420 R 00.01.03.bin|TRB1420_R_00.01.03]]''' | 2019.06.14 === |
| | | |
− | * <b>New features</b> | + | * New features: |
− | ** Added Wake on LAN functionality
| |
| ** Added System → Administration → Diagnostics page | | ** Added System → Administration → Diagnostics page |
| ** Added deny roaming option | | ** Added deny roaming option |
| | | |
− | * <b>Improvements</b> | + | * Improvements: |
| ** Updated WebUI notification box style | | ** Updated WebUI notification box style |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
| + | ** Fixed RS232 echo option |
| ** Status → System table style fix | | ** Status → System table style fix |
| ** Fixed reset mobile bytes received/sent counter after connection restart | | ** Fixed reset mobile bytes received/sent counter after connection restart |
Line 2,625: |
Line 184: |
| ** Fixed call utilities mobile turn off rule | | ** Fixed call utilities mobile turn off rule |
| | | |
− | ===='''TRB1420_R_00.01.02''' | 2019.05.22 ====
| + | ==='''[[Media:TRB1420 R 00.01.02.bin|TRB1420_R_00.01.02]]''' | 2019.05.22 === |
| | | |
− | * <b>New features</b> | + | * New features: |
| ** Added Profiles functionality | | ** Added Profiles functionality |
| ** Added Modbus TCP functionality | | ** Added Modbus TCP functionality |
Line 2,635: |
Line 194: |
| ** Added GRE Tunnel support | | ** Added GRE Tunnel support |
| | | |
− | ===='''TRB1420_R_00.01.01.2''' | 2019.03.25 ====
| + | * Improvements: |
| + | ** Added output state keeping after device reboot |
| + | ** SDK: added sanitized Linux headers |
| + | ** Add LED indication when in fastboot mode |
| + | ** Enabled reset button to enter fastboot mode |
| | | |
− | * <b>New features</b> | + | * Fixes: |
| + | ** Show valid output options when using bidirectional serial over IP type |
| + | ** Fixed reloading eth0 interface |
| + | |
| + | ==='''[[Media:TRB1420 R 00.01.01.2.bin|TRB1420_R_00.01.01.2]]''' | 2019.03.25 === |
| + | |
| + | * New features: |
| ** Added Mobile Utilities service | | ** Added Mobile Utilities service |
| | | |
Line 2,646: |
Line 215: |
| ** Disallow keep settings when flashing an older firmware | | ** Disallow keep settings when flashing an older firmware |
| | | |
− | * <b>Fixes</b> | + | * Fixes: |
| ** Firewall append config with reload option | | ** Firewall append config with reload option |
| ** Added OpenVPN certs removal on OpenVPN tunnel section deletion | | ** Added OpenVPN certs removal on OpenVPN tunnel section deletion |
| ** Various fixes for OpenVPN page | | ** Various fixes for OpenVPN page |
| ** Backup/keep-settings fixed to include OpenVPN certificates and tlt auth files | | ** Backup/keep-settings fixed to include OpenVPN certificates and tlt auth files |
− | ** Backup/keep-settings fixed to preserve root password | + | ** Backup/keep-settings ficed to preserve root password |
| ** Added NTRIP client init | | ** Added NTRIP client init |
| ** Changed NTRIP server IP address field to support hostnames | | ** Changed NTRIP server IP address field to support hostnames |
Line 2,667: |
Line 236: |
| ** sodog fix | | ** sodog fix |
| | | |
− | ===='''TRB1420_R_00.01.00''' | 2019.02.01 ====
| + | ==='''[[Media:TRB1420 R 00.01.00.bin|TRB1420_R_00.01.00]]''' | 2019.02.01 === |
| | | |
| * Improvements | | * Improvements |
| ** New versioning system | | ** New versioning system |
| | | |
− | ===='''TRB14X_R_00.00.11''' | 2019.01.16 ====
| + | ==='''[[Media:TRB14X R 00.00.11.bin|TRB14X_R_00.00.11]]''' | 2019.01.16 === |
| | | |
− | * <b>New features</b> | + | * New features: |
| ** Added CLI service | | ** Added CLI service |
| ** Added Static Routes page | | ** Added Static Routes page |
Line 2,681: |
Line 250: |
| ** Added some visual style changes | | ** Added some visual style changes |
| | | |
− | ===='''TRB14X_R_00.00.10''' | 2018.12.06 ====
| + | ==='''[[Media:TRB14X R 00.00.10.bin|TRB14X_R_00.00.10]]''' | 2018.12.06 === |
| | | |
− | * <b>New features</b> | + | * New features: |
− | ** Initial FW release | + | ** First factory firmware |
| ** Added NTP service | | ** Added NTP service |
| ** Added Dynamic DNS service | | ** Added Dynamic DNS service |
| ** Added Auto Reboot service | | ** Added Auto Reboot service |
| ** Added Input/Output service | | ** Added Input/Output service |
− | ** Added RS232 service | + | ** Added RS232/RS485 services |