Line 4: |
Line 4: |
| ===Configuring WAN as LAN=== | | ===Configuring WAN as LAN=== |
| * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. | | * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. |
− | [[File:RUTOS Advanced mode.png]] | + | [[File:Advanced mode rutOS.png|300px|border|class=tlt-border]] |
| ---- | | ---- |
− | * After that navigate to Network > Interfaces and '''disable WAN''' interface so it won't interfere with the configuration of its port. | + | * After that navigate to Network > Interfaces and '''disable WAN''' interface. |
− | [[File:Disable WAN interface.png]] | + | [[File:Network_interface_settings.png|200px|border|class=tlt-border]] |
| + | [[File:Interfaces disable wan.png|border|class=tlt-border|800px]] |
| ---- | | ---- |
| * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. | | * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. |
− | [[File:LAN Physical settings interface.png]] | + | [[File:Physical settings of interface lan.png|border|1000px|class=tlt-border]] |
| ---- | | ---- |
− | * Select Ethernet Adapter item, which should hold (wan and wan6). | + | * Select Ethernet Adapter item, by default it's '''eth1''' |
− | [[File:Interface item dropdown.png]] | + | [[File:Ethernet adapter in lan interface.png|border|class=tlt-border]] |
− | | |
| ---- | | ---- |
| * It should result in something like this. | | * It should result in something like this. |
− | [[File:Changed lan interface physical settings.png]] | + | [[File:Eth1 appears in lan interface.png|border|class=tlt-border|950px]] |
| ---- | | ---- |
− | * Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 and 2 set right. | + | * Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 is disabled, and ID 2 is untagged. |
− | [[File:VLAN for wan to lan config.png]] | + | [[File:Vlan settings for wan as lan.png|border|class=tlt-border|900px]] |
| ---- | | ---- |
− | From this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router.
| + | At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router. |