Line 1: |
Line 1: |
| ==Introduction== | | ==Introduction== |
− | This article provides a guide on how to configure WAN port as LAN. These configurations are specifically made for RutOS devices (RUTX, RUT3, TRB1, TRB2). | + | This article provides a guide on how to configure WAN port as LAN. These configurations are specifically made for RutX devices. |
| | | |
| ===Configuring WAN as LAN=== | | ===Configuring WAN as LAN=== |
| * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. | | * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. |
− | [[File:Advanced mode rutOS.png|300px|border|class=tlt-border]] | + | [[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]] |
| ---- | | ---- |
− | * After that navigate to Network > Interfaces and '''disable WAN''' interface. | + | * After that navigate to Network > Interfaces |
| [[File:Network_interface_settings.png|200px|border|class=tlt-border]] | | [[File:Network_interface_settings.png|200px|border|class=tlt-border]] |
− | [[File:Interfaces disable wan.png|border|class=tlt-border|800px]] | + | |
| + | * Disable WAN interface |
| + | [[File:Interfaces disable wan.png|border|class=tlt-border|1100px]] |
| ---- | | ---- |
| * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. | | * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. |
− | [[File:Physical settings of interface lan.png|border|1000px|class=tlt-border]] | + | [[File:Physical settings of interface lan.png|border|1100px|class=tlt-border]] |
| ---- | | ---- |
| * Select Ethernet Adapter item, by default it's '''eth1''' | | * Select Ethernet Adapter item, by default it's '''eth1''' |
Line 17: |
Line 19: |
| ---- | | ---- |
| * It should result in something like this. | | * It should result in something like this. |
− | [[File:Eth1 appears in lan interface.png|border|class=tlt-border|950px]] | + | [[File:Eth1 appears in lan interface.png|border|class=tlt-border|1100px]] |
| ---- | | ---- |
| * Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 is disabled, and ID 2 is untagged. | | * Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 is disabled, and ID 2 is untagged. |
− | [[File:Vlan settings for wan as lan.png|border|class=tlt-border|900px]] | + | [[File:Vlan settings for wan as lan.png|border|class=tlt-border|1100px]] |
| ---- | | ---- |
| At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router. | | At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router. |