Changes

RUT955 Inverting Relay Output Polarity (view source)

Revision as of 13:09, 12 June 2020

558 bytes added ,  13:09, 12 June 2020
Created page with "In some cases you might want to make RUT955's relay default state ''high''. The problem is that when you reboot the router the router's relay goes back to its default state ('..."
In some cases you might want to make RUT955's relay default state ''high''. The problem is that when you reboot the router the router's relay goes back to its default state (''low'') for a short period of time. In this case if you want to constantly keep it in ''high' state you could connect your load like shown in the picture below:

[[File:Inverting relay output.png]]

For further information about relay control refer to this page: '''http://wiki.teltonika-networks.com/index.php?title=Input/Output'''

[[Category:RUT955 Hardware Application Examples]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/64972"

Navigation menu