Changes

If you are using the device you are trying to set up as your WAN source when visiting this website, it should automatically assign your IP address to that hostname you have just created. If it does not, or you are using a different WAN source, you can change the IP address.

If you are using the device you are trying to set up as your WAN source when visiting this website, it should automatically assign your IP address to that hostname you have just created. If it does not, or you are using a different WAN source, you can change the IP address.

[[File:Networking rutos configuration example ddns dynu confirm v1.png|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns dynu confirm v1.png|border|class=tlt-border]]

# Confirm or change the '''public IP'''

# Confirm or change the '''Public IP'''

# Click on '''+ Add''' button

# Click on '''+ Add''' button

</br>

</br>

----

----

If you did a right procedure, will be shown your DDNS services list, confirm if your domain and public IP are right. If they are, the [https://www.dynu.com dynu.com] setup is finished.

If you did the procedure right, you will be able to see your new DDNS domain in the '''Dynamic DNS Service''' page. Confirm whether your domain and public IP are right. If they are, the [https://www.dynu.com dynu.com] setup is finished.

[[File:Networking rutos configuration example ddns dynu list v1.png|border|class=tlt-border]]

[[File:Networking rutos configuration example ddns dynu list v1.png|border|class=tlt-border]]