|
|
(18 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
| ==Summary==
| | {{Template: Networking_rut850_manual_mobile |
| | | <!------------------------DEVICE-----------------------> |
| The '''Mobile''' section is used to configure SIM card parameters, mobile data limits and network operators. This chapter is an overview of RUT850 routers' Mobile section.
| | | name = RUT850 |
| | | | series = RUT850 |
| ==General==
| | }} |
| | |
| The '''General''' tab is used to configure SIM card parameters such as Service mode, Connection type, APN and more much more.
| |
| | |
| ===Mobile Configuration===
| |
| ----
| |
| The '''Mobile Configuration''' section is used to configure main SIM card parameters.
| |
| | |
| | |
| [[Image:Network mobile general rut850.PNG]]
| |
| | |
| {| class="wikitable"
| |
| |+
| |
| ! style="width: 250px; background: black; color: white;" | Field name
| |
| ! style="width: 250px; background: black; color: white;" | Value
| |
| ! style="width: 1200px; background: black; color: white;" | Description
| |
| |-
| |
| ! colspan="3" | Mobile Configuration
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Connection type
| |
| | style="text-align: left; vertical-align: top;" | QMI {{!}} NCM {{!}} NDIS {{!}} PPP; Default: '''QMI'''
| |
| | style="text-align: left; vertical-align: top;" | Defines how the router's modem will establish a connection to the ISP (Internet Service Provider)
| |
| '''PPP''' uses a dialling number to establish a data connection
| |
| | |
| '''QMI''' does not use dialling or the PPP protocol to establish data connection and it is usually faster than PPP mode
| |
| | |
| '''NOTE''': PPP connection type exists on all RUT devices, but '''QMI''' does not. If you have a RUT device with a '''Telit''' modem, '''QMI''' will be replaced by '''NCM'''. If your RUT device contains a '''Huawei''' modem, you will see '''NDIS''' instead of '''QMI'''. '''QMI''' connection type is available on RUT devices that use a '''Quectel''' modem (which is the standard modem for most RUT devices)
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | APN | |
| | style="text-align: left; vertical-align: top;" | string; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network
| |
| | |
| '''NOTE''': an APN Network Identifier cannot start with any of the strings "rac", "lac", "sgsn" or "rnc", it cannot end in ".gprs" and it cannot take the value "*"
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | PIN number
| |
| | style="text-align: left; vertical-align: top;" | string; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | A personal identification number is a numeric password used to authenticate a user to a system
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Dialing number
| |
| | style="text-align: left; vertical-align: top;" | string; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | A Dialling number is used to establish a mobile PPP connection
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Authentication method
| |
| | style="text-align: left; vertical-align: top;" | CHAP {{!}} PAP {{!}} None; Default: '''None'''
| |
| | style="text-align: left; vertical-align: top;" | The Authentication method that your GSM carrier uses to authenticate new connections on its network
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Service mode
| |
| | style="text-align: left; vertical-align: top;" | 2G only {{!}} 3G only {{!}} 4G (LTE) only {{!}} Automatic; Default: '''Automatic'''
| |
| | style="text-align: left; vertical-align: top;" | Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which type of network you wish to connect to, e.g., if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Deny data roaming
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | When enabled this function prevents the device from establishing mobile data connection while not in your home network
| |
| |-
| |
| ! colspan="3" | Mobile Data On Demand
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Enable
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | Toggles Mobile Data On Demand ON or OFF. The Mobile Data On Demand function keeps the mobile data connection '''ON''' only when it is in use.
| |
| | |
| '''NOTE:''' This function is only available whith PPP Connection type
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | No data timeout (sec)
| |
| | style="text-align: left; vertical-align: top;" | integer [10..3600]; Default: '''10'''
| |
| | style="text-align: left; vertical-align: top;" | Mobile data connection will be terminated if no data is transferred during the timeout period specified in this field
| |
| |-
| |
| ! colspan="3" | Force LTE network
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Enable
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | Toggles Force LTE network ON or OFF
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Reregister
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | When enabled the modem will reregister before trying to connect to an LTE network
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Timeout (sec)
| |
| | style="text-align: left; vertical-align: top;" | integer [180..3600]; Default: '''300''' | |
| | style="text-align: left; vertical-align: top;" | Time in seconds between attempts to connect to an LTE network
| |
| |-
| |
| |}
| |
| | |
| ==Network Operators==
| |
| | |
| The Network Operators window provides you with the ability to scan, select and enter manual Network Operator codes. This function is a great utility when the router is used in roaming conditions.
| |
| | |
| ===Scan For Network Operators===
| |
| ----
| |
| Scan For Network Operators is a function that initiates a scan for available network operators in your area. To initiate a scan, press the '''Scan for operators button'''. After you do so you will be prompted with a pop-up asking you if you're really sure, since while the scan is in progress you will lose your data connection for approximately 2 minutes. To proceed click '''Ok'''.
| |
| | |
| [[Image:Network mobile network operators network operators rut850.PNG]]
| |
| | |
| After the scan is complete you will be provided with a list of operators similar to the one in the example above (except with the available operators from your area). The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not '''Forbidden'''.
| |
| | |
| Below the list is the scan button if you should choose to repeat the scan and the '''Connection mode''' box containing options on how you want the router to connect to network operators. The box contains three choices: '''Auto''' (default), '''Manual-Auto''' and '''Manual'''.
| |
| | |
| When set to Auto the router automatically connects to the network operator with the best connectivity.
| |
| | |
| The Manual choice prompts you to enter an operator's code that the router will then always try to connect to (even if previous attempts have been unsuccessful).
| |
| | |
| Manual-auto also prompts you to enter an operator's code but if the router can't complete the connection, it will automatically connect to the next available operator.
| |
| | |
| Most network operators' codes can be found online or you can initiate a scan for operators - if the operator you're looking for can be reached from your current area, the list of available network operators will contain the desired operator's code.
| |
| | |
| ===Operators List=== | |
| ----
| |
| The Operators List tab is used for creating a Blacklist or Whitelist for undesired or desired operators.
| |
| | |
| [[Image:Network mobile network operators operators list rut850.PNG]]
| |
| | |
| {| class="wikitable"
| |
| |+
| |
| ! style="width: 250px; background: black; color: white;" | Field name
| |
| ! style="width: 250px; background: black; color: white;" | Value
| |
| ! style="width: 1200px; background: black; color: white;" | Description
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Enable
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | Enables the Operators List function
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Mode
| |
| | style="text-align: left; vertical-align: top;" | Blacklist {{!}} White list; Default: '''Blacklist'''
| |
| | style="text-align: left; vertical-align: top;" | The type of list
| |
| '''Blacklist''' - operators residing in the blacklist will considered forbidden and your router will not attempt to connect to them even if they are available
| |
| | |
| '''White list''' - operators residing in the white list will be the only operators that the router will be trying to connect to. Other operators, that are not in the white list, will be considered forbidden
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Name
| |
| | style="text-align: left; vertical-align: top;" | string; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | Operator's name. Used only for easier management purposes
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Operator code
| |
| | style="text-align: left; vertical-align: top;" | integer; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | Operator's code. You can find network operator codes online or use the router's Scan for operators function described [[#Scan_for_network_operators|here]]
| |
| |-
| |
| |}
| |
| '''Be mindful when using the Operators List function as it very easy to block yourself from the right operators!'''
| |
| | |
| ==Mobile Data Limit==
| |
| | |
| The '''Mobile Data Limit''' window provides you with the possibility to set a custom data limit for your SIM card and data limit warning via SMS message in order to protect yourself from unwanted data charges.
| |
| | |
| | |
| [[Image:Network mobile mobile data limit rut850.PNG]]
| |
| | |
| {| class="wikitable"
| |
| |+
| |
| ! style="width: 250px; background: black; color: white;" | Field name
| |
| ! style="width: 250px; background: black; color: white;" | Value
| |
| ! style="width: 1200px; background: black; color: white;" | Description
| |
| |-
| |
| ! colspan="3" | Data Connection Limit Configuration
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Enable data connection limit
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | Toggles data limit ON or OFF
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Data limit* (MB)
| |
| | style="text-align: left; vertical-align: top;" | integer; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | The received data limit. After reaching the specified data limit, the router will kill your current mobile data connection
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Period
| |
| | style="text-align: left; vertical-align: top;" | Month {{!}} Week {{!}} Day; Default: '''Month'''
| |
| | style="text-align: left; vertical-align: top;" | Period for which the data limit applies to
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Start day {{!}} Start hour
| |
| | style="text-align: left; vertical-align: top;" | day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: '''day 1'''
| |
| | style="text-align: left; vertical-align: top;" | Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
| |
| |-
| |
| ! colspan="3" | SMS Warning Configuration
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Enable SMS warning
| |
| | style="text-align: left; vertical-align: top;" | yes {{!}} no; Default: '''no'''
| |
| | style="text-align: left; vertical-align: top;" | Toggles SMS Warning ON or OFF. SMS Warning Configuration provides you with the ability to configure a rule that sends you an SMS message after the router reaches a specified amount of data.
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Data limit* (MB)
| |
| | style="text-align: left; vertical-align: top;" | integer; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | The received data limit. After reaching the specified data limit, the router will send out an SMS warning message to the specified phone number
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Period
| |
| | style="text-align: left; vertical-align: top;" | Month {{!}} Week {{!}} Day; Default: '''Month'''
| |
| | style="text-align: left; vertical-align: top;" | Period for which the data limit applies to
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Start day {{!}} Start hour
| |
| | style="text-align: left; vertical-align: top;" | day [1..31] | day [Monday..Sunday] | hour [1..24]; Default: '''day 1'''
| |
| | style="text-align: left; vertical-align: top;" | Data limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the data limit counter will reset and start counting the data limit over again
| |
| |-
| |
| ! style="text-align: left; vertical-align: top;" | Phone number
| |
| | style="text-align: left; vertical-align: top;" | phone number; Default: " "
| |
| | style="text-align: left; vertical-align: top;" | Recipient's phone number
| |
| |-
| |
| |}
| |
| '''*Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur'''
| |
| | |
| ===Clear Data Limit===
| |
| ----
| |
| The Clear Data Limit section contains only one button - the '''Clear data limit''' button, which resets the counter for the configured data limit (i.e., the router begins counting the data from 0 after this button is clicked).
| |
| | |
| [[File:Network mobile clear datalimit v2.PNG]]
| |
| | |
| '''Remember that the Clear data limit button doesn't clear the actual used data statistics for the SIM card, only the received data counters of the limit guard data counter!'''
| |
The information in this page is updated in accordance with the RUT850_R_00.01.04 firmware version.
Summary
The Mobile page is used for setting parameters related to the mobile data connection. This page of the user manual provides an overview of the Mobile section for RUT850 devices.
General
The General section is used to configure the SIM card parameters that define how the router establishes a cellular connection.
Mobile Configuration
The Mobile Configuration section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
Field |
Value |
Description |
Connection type |
QMI | PPP; default: QMI |
How the router's modem will establish a connection to the carrier.
- PPP - uses a dialling number to establish a data connection.
- QMI - does not use a dialling number to connect and is usually faster than PPP.
|
APN |
string; default: none |
An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract. An APN Network Identifier cannot start with any of the following strings:
it cannot end in:
and it cannot contain the asterisk symbol (*).
|
PIN number |
string; default: none |
A 4-digit long numeric password used to authenticate the modem to the SIM card. |
Dialing number |
string; default: none |
A dial code used to establish a mobile PPP connection. |
Authentication method |
CHAP | PAP | None; default: None |
Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password. |
Service mode |
2G only | 3G only | 4G (LTE) only | Automatic; default: Automatic |
Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity. |
Deny data roaming |
yes | no; default: no |
When enabled, this prevents the device from establishing a mobile data connection while not in your home network. |
Mobile data on demand
The mobile data on demand function keeps the mobile data connection on only when it is in use. When the router detects that there is no traffic, it shuts down the mobile data connection and turns it back on only when there is a "Demand" (a user trying to reach a website, for example). Refer to the figure and table below for more information.
Field |
Value |
Description |
Enable |
yes | no; default: no |
Turns mobile data on demand on or off Important: this function is only available with PPP Connection type. |
No data timeout (sec) |
integer [10..3600]; default: 10 |
Mobile data connection will be terminated if no data is transferred during the timeout period specified in this field. |
Network frequency bands
The network frequency bands section provides the possibility to manually choose which frequency band the router's module should use for the cellular connection.
Simply select Manual connection method and check the bands that you want the module to use. If all bands are unchecked, the band that provides the best connectivity will be used.
Available network frequency bands may differ based on router modem module. More information about router module supported network frequency bands: https://www.quectel.com/product/ec25.htm
Information about router's modem module can be found by going to Status → Device Information page and checking FW Version field.
Usually first 5-7 characters show modem module series code. For example:
Force LTE network
The Force LTE network function makes the router forcefully connect to an LTE network at a specified period of time. Refer to the figure and table below for more information.
Field |
Value |
Description |
Enable |
yes | no; default: no |
Turns force LTE network on or off. |
Reregister |
yes | no; default: no |
When enabled the modem will attempt to reregister to the carrier before trying to connect to an LTE network. |
Timeout (sec) |
integer [180..3600]; default: 300 |
Time in seconds between forced connection attempts. |
Network Operators
The Network Operators tab provides you with the possibility to scan for and manually manage mobile network opertors to which the router's SIM card can connect to. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the SIM Management section.
Scan For Network Operators
Scan For Network Operators is a function that initiates a scan for mobile network operators available in your area. To initiate a scan, press the 'Scan for operators' button. After you do, you will be prompted with a pop-up asking if you wish to proceed. This is because while the scan is in progress you will lose your data connection for approximately 2 minutes.
After the scan is complete you will be presented with a list of operators available in your area. The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not Forbidden.
Below the list you can select how to the router should connect to network operators:
The 'Reconnect interval' box specifies how often the device will attempt to reconnect to a network operator, while the 'Connection mode' specifies the logic of how the router will connect operators:
- Auto - the router automatically connects to the network operator that provides the best connectivity.
- Manual - prompts you to enter an operator's code*. The router will then only attempt to connect to the operator whose code was specified (even if previous attempts have been unsuccessful).
- Manual-Auto - prompts you to enter an operator's code* but if the router can't complete the connection, it will automatically connect to the next available operator.
* Most network operators' codes can be found online or you can initiate a scan for operators - if the operator you're looking for can be reached from your current area, the list of available network operators will contain the desired operator's code.
Operators List
The Operators List section is used for creating a blacklist or whitelist for undesired or desired operators.
Settings
Field |
Value |
Description |
Enable |
yes | no; default: no |
Turns operator list on or off. |
Mode |
Blacklist | Whitelist; default: Whitelist |
Defines how operators will be filtered.
- Blacklist - operators contained in the blacklist are considered forbidden and your router will not attempt to connect to them even if they are available.
- Whitelist - operators contained in the whitelist will be the only operators that the router will be trying to connect to. Other operators that are not in the whitelist will be considered forbidden.
|
Rescan network |
5 min | 10 min | 30 min | 60 min | 120 min; default: 5 min |
Period of rescan for a network operator if the modem is not able to connect to one initially. |
Operators List
Field |
Value |
Description |
Name |
string; default: none |
Operator's name. Used only for easier management purposes and not in the actual filtering process. |
Operator code |
integer; default: none |
Operator's code used to identify a network operator. You can find network operator codes online or use the router's scan for operators function described here. |
Important: be mindful when using the Operators List function as it very easy to block yourself from the right operators and lose your data connection.
Mobile Data Limit
The Mobile Data Limit page provides you with the possibility to set data usage limits for your SIM cards and data usage warnings via SMS message in order to protect yourself from unwanted data charges.
Data Connection Limit Configuration
The Data Connection Limit Configuration section is used to configure custom mobile data limits for your SIM card. When the mobile data limit set for the SIM card is reached, the router will no longer use the mobile connection to establish a data connection until the limit period is over or the limit is reset by the user.
Field |
Value |
Description |
Enable data connection limit |
yes | no; default: no |
Turns mobile data limitations on or off. |
Data limit* (MB) |
integer; default: none |
The amount of data that is allowed to be downloaded over the specified period of time. When the limit is reached, the router will no longer be able to establish a data connection until the period is over or the data limit is reset. |
Period |
Month | Week | Day; default: Month |
Data limit period after which the data counter is reset on the specified Start day. |
Start day | Start hour |
day [1..31] | day [Monday..Sunday] | hour [1..24]; default: day 1 |
Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again. |
*Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.
SMS Warning Configuration
The SMS Warning Configuration section provides you with the possibility to configure a rule that sends you an SMS message after the router's SIM card uses a specified amount of mobile data.
Field |
Value |
Description |
Enable SMS warning |
yes | no; default: no |
Toggles SMS warning On or OFF |
Data limit* (MB) |
integer; default: none |
The received data limit before sending an SMS warning. After reaching using the the amount of data specified in this field, the router will send an SMS warning message to the specified phone number. |
Period |
Month | Week | Day; default: Month |
Period to which the data limit applies to. |
Start day | Start hour |
day of the month [1..31] | day of the week [Monday..Sunday] | hour of the day [1..24]; default: 1 |
Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again. |
Phone number |
phone number; default: none |
Recipient's phone numbers |
Clear Data Limit
The Clear Data Limit section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.
Important: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.