RUT850 TR-069: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Summary==
{{Template: Networking_rut_manual_tr-069
 
<!------------------------DEVICE----------------------->
'''TR-069 (Technical Report 069)''' is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. This section is a summary of '''TR-069''' in RUT routers.
| name  = RUT850
 
| series = RUT850
==TR-069 Client Configuration==
}}
 
[[Image:Services tr069.PNG]]
 
<table class="nd-mantable">
    <tr>
        <th>field name</th>
      <th>value</th>
      <th>description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>yes {{!}} no; Default: '''no'''</td>
      <td>Toggles TR-069 client ON or OFF</td>
    </tr>
    <tr>
      <td>Periodic enable</td>
      <td>yes {{!}} no; Default: '''yes'''</td>
      <td>Toggles periodic transmissions of data to server ON or OFF</td>
    </tr>
    <tr>
    <td>Accept server request</td>
        <td>yes {{!}} no; Default: '''no'''</td>
        <td>When enabled, the router accepts connection requests from server</td>
    </tr>
    <tr>
    <td>Sending interval</td>
        <td>integer [60..9999999]; Default: '''100'''</td>
        <td>Periodic data transmission interval</td>
    </tr>
    <tr>
      <td>Username</td>
      <td>string; Default: '''easycwmp'''</td>
      <td>User name used for authentication on a TR-069 server</td>
    </tr>
    <tr>
    <td>Password</td>
        <td>string; Default: " "</td>
        <td>Password used for authentication on a TR-069 server</td>
    </tr>
    <tr>
    <td>URL</td>
        <td>host {{!}} ip; Default: '''<nowiki>http://192.168.1.110:8080/openacs/acs</nowiki>'''</td>
        <td>TR-069 server’s address</td>
    </tr>
</table>
 
==Management via TR-069==
 
'''TR-069''' can be used to set or get values from RUT routers. Below is a list of commands used for router management via TR-069.
 
* R - Read only
* RW - Read/Write
* string(64) - 64 bit string
* string(256) - 256 bit string
* unsignedInt - integer storing only positive values
 
'''FW Upgrade:'''
 
  1. '''FileType''' - 1- Firmware Upgrade Image, string(64)
  2. '''URL''' - URL, specifying the source file location, string(256)
  3. '''Username''' - Username to be used by the CPE to authenticate with the file server. This string is set to the empty string if no authentication is required, string(256)
  4. '''Password''' - Password to be used by the CPE to authenticate with the file server. This string is set to the empty string if no authentication is required, string(256)
  5. '''FileSize''' - The size of the file to be downloaded in bytes, unsignedInt
 
'''Device Information:'''
 
  1. '''DeviceInfo.SpecVersion''' - R
  2. '''DeviceInfo.ProvisioningCode''' - RW
  3. '''DeviceInfo.Manufacturer''' - Device manufacturer (e.g., Teltonika) R
  4. '''DeviceInfo.ManufacturerOUI''' - R
  5. '''DeviceInfo.ProductClass''' - Device model (e.g., RUT955) R
  6. '''DeviceInfo.SerialNumber''' - Device serial number (e.g., 09547785) R
  7. '''DeviceInfo.HardwareVersion''' - Device hardware version (e.g., 0505) R
  8. '''DeviceInfo.SoftwareVersion''' - Device software version (e.g., RUT9XX_R_00.03.816) R
  9. '''DeviceInfo.UpTime''' - Router uptime R
  10. '''DeviceInfo.DeviceLog''' - Last line of device log. R
  11. '''DeviceInfo.MemoryStatus'''
    11.1 '''DeviceInfo.MemoryStatus.Total''' - Total device memory (e.g., 61008) R
    11.2 '''DeviceInfo.MemoryStatus.Free''' - Free memory (e.g., 24224) R
 
'''IP Ping Diagnostics support:'''
 
  1. '''IPPingDiagnostics'''
    1.1 '''IPPingDiagnostics.DiagnosticsState''' - Diagnostics State (e.g. None) R
    1.2 '''IPPingDiagnostics.Host''' - Host RW
    1.3 '''IPPingDiagnostics.NumberOfRepetitions''' - Number Of Repetitions RW
    1.4 '''IPPingDiagnostics.Timeout''' - Timeout RW
    1.5 '''IPPingDiagnostics.DataBlockSize''' - Data block size RW
    1.6 '''IPPingDiagnostics.SuccessCount''' - Success count R
    1.7 '''IPPingDiagnostics.FailureCount''' - Fail count R
    1.8 '''IPPingDiagnostics.AverageResponseTime''' - Average Response Time R
    1.9 '''IPPingDiagnostics.MinimumResponseTime''' - Minimum Response Time R
    1.10 '''IPPingDiagnostics.MaximumResponseTime''' - Maximum Response Time R
 
'''Mobile Information:'''
 
  1.'''MobileInfo:'''
    1.1 '''MobileInfo.RSSI''' - GSM signal level R
    1.2 '''MobileInfo.ConnState''' - Connection state R
    1.3 '''MobileInfo.NetState''' - Network link state R
    1.4 '''MobileInfo.ICCID''' - SIM ICCID R
    1.5 '''MobileInfo.IMSI''' - IMSI R
    1.6 '''MobileInfo.RSCP''' - RSCP level R
    1.7 '''MobileInfo.ECIO''' - ec/io level R
    1.8 '''MobileInfo.RSRP''' - RSRP level R
    1.9 '''MobileInfo.SINR''' - SINR level R
    1.10 '''MobileInfo.RSRQ''' - RSRQ level R
    1.11 '''MobileInfo.CellID''' - CellID R
    1.12 '''MobileInfo.Operator''' - Name of operator used R
    1.13 '''MobileInfo.OperatorNum''' - Operator number R
    1.14 '''MobileInfo.ConnType''' - Data carrier type R
    1.15 '''MobileInfo.Modem'''
      1.15.1 '''MobileInfo.Modem.Model''' - Modem model R
      1.15.2 '''MobileInfo.Modem.Manufacturer''' - Modem manufacturer R
      1.15.3 '''MobileInfo.Modem.Serial''' - Modem serial number R
      1.15.4 '''MobileInfo.Modem.Revision''' - Modem revision number R
      1.15.5 '''MobileInfo.Modem.IMEI''' - Modem IMEI R
      1.15.6 '''MobileInfo.Modem.SimState''' - SIM car state R
      1.15.7 '''MobileInfo.Modem.PinState''' - PIN state R
      1.15.8 '''MobileInfo.Modem.Temperature''' - Modem temperature in 0.1 degrees Celcius R
  1.16 '''MobileInfo.SentToday''' - Bytes sent today R
  1.17 '''MobileInfo.ReceivedToday''' - Bytes received today R
  1.18 '''MobileInfo.SentThisMonth''' - Bytes sent this month R
  1.19 '''MobileInfo.ReceivedThisMonth''' - Bytes received this month R
 
'''WAN Information:'''
 
  1. '''WANConnectionDevice'''
    1.1 '''WANConnectionDevice.WANIPConnection'''
      1.1.1 '''WANConnectionDevice.WANIPConnection.ConnectionStatus''' - Connection status (e.g., Connected) R
      1.1.2 '''WANIPConnection.ExternalIPAddress''' - IP address R
      1.1.3 '''WANIPConnection.MACAddress''' - MAC address R
    1.2 '''WANConnectionDevice.WANPPPConnection''' - PPP connection
      1.2.1. '''WANConnectionDevice.WANPPPConnection.1.Enable''' - Conection state (e.g., 1 or 0) R
      1.2.2. '''WANConnectionDevice.WANPPPConnection.1.APN''' - APN R
      1.2.3. '''WANConnectionDevice.WANPPPConnection.1.ExternalIPAddress''' - IP address R
 
'''Wi-Fi Information:'''
 
  1. '''Radio'''
    1.2 '''Radio.Enable''' - Enabled (e.g., 0 or 1) RW
    1.3 '''Radio.Status''' - Wifi status (e.g., Up) R
    1.4 '''Radio.Name''' - Device name R
    1.5 '''Radio.SupportedFrequencyBands''' - Supported frequency bandss (e.g., 2.4GHz) R
    1.6 '''Radio.OperatingFrequencyBand''' - Operating frequency bandss (e.g., 2.4GHz) R
    1.7 '''Radio.ChannelsInUse''' - Channels R
    1.8 '''Radio.Channel''' - Channel in use RW
    1.9 '''Radio.AutoChannelSupported''' - Auto channel support (e.g., 1) R
    1.10 '''Radio.AutoChannelEnable''' - Auto channel state (e.g., 1) RW
    1.11 '''Radio.OperatingStandards''' - Operating standards (e.g., 11ng) RW
   2. '''SSID'''
    2.1 '''SSID.Enable''' - Wifi interface state (e.g., 1) RW
    2.2 '''SSID.Status''' - Wifi interface status (e.g., 1) R
    2.3 '''SSID.Name''' - Interface name (e.g., wlan0 ) R
    2.4 '''SSID.SSID''' - SSID RW
  3. '''Security'''
    3.5 '''Security.ModesSupported''' - (None,WEP-64,WEP-128,WPA-Personal,WPA2-Personal,WPA-WPA2-Personal,WPA-Enterprise,WPA2-Enterprise,WPA-WPA2-Enterprise) R
    3.6 '''Security.ModeEnabled''' - Current mode (e.g WPA2-Personal) RW
    3.7 '''Security.WEPKey''' - WEP Key RW
    3.8 '''Security.PreSharedKey''' - Pre shared key RW
    3.9 '''Security.KeyPassphrase''' - Key passphrase RW
 
'''Hotspot Information:'''
 
  1. '''General'''
    1.1 '''General.Enable''' - State (e.g. 1) RW
    1.2 '''General.IP''' - IP address (e.g. 192.168.2.254) RW
    1.3 '''General.Mode''' - Authentication mode
          ('''extrad''' - External radius, '''intrad''' - Internal radius, '''norad''' - Without radius, '''add''' - Advertisement, '''mac''' - MAC auth, '''sms''' - SMS OTP) (e.g., norad) RW
    1.4 '''General.ExternalLandingPage''' - Enable external landing page (e.g., 1) RW
    1.5 '''General.LandingPageAddress''' - External landing page address (e.g., www.landingpageaddr.com) RW
    1.6 '''General.HTTPSRedirect''' - Enable HTTPS redirect RW
  2. '''Radius'''
    2.1 '''Radius.Server1''' - First radius server address RW
    2.2 '''Radius.Server2''' - Second Radius server address RW
    2.3 '''Radius.AuthenticationPort''' - Authentication port RW
    2.4 '''Radius.AccountingPort''' - Accounting port RW
    2.5 '''Radius.RadiusSecretKey''' - Radius secret key RW
    2.6 '''Radius.UAMPort''' - UAM port RW
    2.7 '''Radius.UAMUIPort''' - UAM UI port RW
    2.8 '''Radius.UAMSecret''' - UAM secret RW
    2.9 '''Radius.NASIdentifier''' - NAS identifier RW
    2.10 '''Radius.SwapOctets''' - Swap octets RW
    3.1 '''Radius.LocationName''' - Location name RW
 
'''Management Server Information:'''
 
  1. '''ManagementServer.URL''' - Server url (e.g., http://192.168.1.110:8080/openacs/acs) RW
  2. '''ManagementServer.Username''' - Username (e.g., easycwmp) RW
  3. '''ManagementServer.Password''' - Password (e.g., easycwmp) RW
  4. '''ManagementServer.PeriodicInformEnable''' - Enable periodic inform (e.g., 1 or 0) RW
  5. '''ManagementServer.PeriodicInformInterval''' - Interval (e.g, 100) RW
  6. '''ManagementServer.PeriodicInformTime''' - Inform time (e.g, 0001-01-01T00:00:00Z) RW

Latest revision as of 15:27, 16 November 2020

Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services section > RUT850 TR-069

The information in this page is updated in accordance with the RUT850_R_00.01.04 firmware version.

Summary

TR-069 (Technical Report 069) is an application layer protocol designed for management of equipment connected to a remote network.

This chapter of the user manual provides an overview of the UPnP page in RUT850 devices.

TR-069 is additional software that can be installed from the System → Package Manager page.

TR-069 Client Configuration

Field Value Description
Enable yes | no; default: no Turns TR-069 client on or off.
Periodic enable yes | no; default: yes Turns periodic data transmissions to server on or off.
Accept server request yes | no; default: no When enabled the router accepts connection requests from server.
Sending interval integer [60..9999999]; default: 100 Periodic data transmission frequency (in seconds).
Username string; default: easycwmp Username used for authentication to a TR-069 server.
Password string; default: easycwmp Password used for authentication to a TR-069 server.
URL host | ip; default: http://192.168.1.110:8080/openacs/acs IP address or hostname of a TR-069 server.

Management via TR-069

TR-069 can be used to set or get values from RUT routers. Below is a list of commands used for router management via TR-069.

  • R - read only;
  • RW - read/write;
  • string(64) - 64 bit string;
  • string(256) - 256 bit string;
  • unsignedInt - integer storing only positive values.

FW Upgrade: 

 1. FileType - firmware Upgrade Image, string(64)
 2. URL - URL, specifying the source file location, string(256) 
 3. Username - username to be used by the CPE to authenticate with the file server. This string is set to the empty string if no authentication is required, string(256) 
 4. Password - password to be used by the CPE to authenticate with the file server. This string is set to the empty string if no authentication is required, string(256)
 5. FileSize - the size of the file to be downloaded in bytes, unsignedInt

Device Information: 

 1. DeviceInfo.SpecVersion - R
 2. DeviceInfo.ProvisioningCode - RW
 3. DeviceInfo.Manufacturer - device manufacturer (e.g., Teltonika) R
 4. DeviceInfo.ManufacturerOUI - R
 5. DeviceInfo.ProductClass - device model (e.g., RUT850) R
 6. DeviceInfo.SerialNumber - device serial number (e.g., 1000111111) R
 7. DeviceInfo.HardwareVersion - device hardware version (e.g., 0505) R
 8. DeviceInfo.SoftwareVersion - device software version (e.g., {{{fw_version}}}) R
 9. DeviceInfo.UpTime - router uptime R
 10. DeviceInfo.DeviceLog - last line of device log. R
 11. DeviceInfo.MemoryStatus
   11.1 DeviceInfo.MemoryStatus.Total - total device memory (e.g., 61008) R
   11.2 DeviceInfo.MemoryStatus.Free - free memory (e.g., 24224) R

IP Ping Diagnostics support: 

 1. IPPingDiagnostics
   1.1 IPPingDiagnostics.DiagnosticsState - diagnostics State (e.g. None) R
   1.2 IPPingDiagnostics.Host - host RW
   1.3 IPPingDiagnostics.NumberOfRepetitions - number of repetitions RW
   1.4 IPPingDiagnostics.Timeout - timeout RW
   1.5 IPPingDiagnostics.DataBlockSize - data block size RW
   1.6 IPPingDiagnostics.SuccessCount - success count R
   1.7 IPPingDiagnostics.FailureCount - fail count R
   1.8 IPPingDiagnostics.AverageResponseTime - average response time R
   1.9 IPPingDiagnostics.MinimumResponseTime - minimum response time R
   1.10 IPPingDiagnostics.MaximumResponseTime - maximum response time R

Mobile Information: 

 1.MobileInfo
   1.1 MobileInfo.RSSI - GSM signal level R
   1.2 MobileInfo.ConnState - connection state R
   1.3 MobileInfo.NetState - network link state R
   1.4 MobileInfo.ICCID - SIM ICCID R
   1.5 MobileInfo.IMSI - IMSI R
   1.6 MobileInfo.RSCP - RSCP level R
   1.7 MobileInfo.ECIO - EC/IO level R
   1.8 MobileInfo.RSRP - RSRP level R
   1.9 MobileInfo.SINR - SINR level R
   1.10 MobileInfo.RSRQ - RSRQ level R
   1.11 MobileInfo.CellID - CellID R
   1.12 MobileInfo.Operator - mame of operator used R
   1.13 MobileInfo.OperatorNum - operator number R
   1.14 MobileInfo.ConnType - data carrier type R
   1.15 MobileInfo.Modem
     1.15.1 MobileInfo.Modem.Model - modem model R
     1.15.2 MobileInfo.Modem.Manufacturer - modem manufacturer R
     1.15.3 MobileInfo.Modem.Serial - modem serial number R
     1.15.4 MobileInfo.Modem.Revision - modem revision number R
     1.15.5 MobileInfo.Modem.IMEI - modem IMEI R
     1.15.6 MobileInfo.Modem.SimState - SIM card state R
     1.15.7 MobileInfo.Modem.PinState - PIN state R
     1.15.8 MobileInfo.Modem.Temperature - modem temperature in 0.1 degrees Celsius R
 1.16 MobileInfo.SentToday - bytes sent today R
 1.17 MobileInfo.ReceivedToday - bytes received today R
 1.18 MobileInfo.SentThisMonth - bytes sent this month R
 1.19 MobileInfo.ReceivedThisMonth - bytes received this month R

WAN Information: 

 1. WANConnectionDevice
   1.1 WANConnectionDevice.WANIPConnection
     1.1.1 WANConnectionDevice.WANIPConnection.ConnectionStatus - connection status (e.g., Connected) R
     1.1.2 WANIPConnection.ExternalIPAddress - IP address R
     1.1.3 WANIPConnection.MACAddress - MAC address R
   1.2 WANConnectionDevice.WANPPPConnection - PPP connection
     1.2.1. WANConnectionDevice.WANPPPConnection.1.Enable - connection state (e.g., 1 or 0) R
     1.2.2. WANConnectionDevice.WANPPPConnection.1.APN - APN R
     1.2.3. WANConnectionDevice.WANPPPConnection.1.ExternalIPAddress - IP address R

WiFi Information: 

 1. Radio
   1.2 Radio.Enable - enabled (e.g., 0 or 1) RW
   1.3 Radio.Status - WiFi status (e.g., Up) R
   1.4 Radio.Name - Device name R
   1.5 Radio.SupportedFrequencyBands - supported frequency bandss (e.g., 2.4GHz) R
   1.6 Radio.OperatingFrequencyBand - operating frequency bandss (e.g., 2.4GHz) R
   1.7 Radio.ChannelsInUse - channels R
   1.8 Radio.Channel - channel in use RW
   1.9 Radio.AutoChannelSupported - auto channel support (e.g., 1) R
   1.10 Radio.AutoChannelEnable - auto channel state (e.g., 1) RW
   1.11 Radio.OperatingStandards - operating standards (e.g., 11ng) RW
 2. SSID
   2.1 SSID.Enable - WiFi interface state (e.g., 1) RW
   2.2 SSID.Status - WiFi interface status (e.g., 1) R
   2.3 SSID.Name - interface name (e.g., wlan0 ) R
   2.4 SSID.SSID - SSID RW
 3. Security
   3.5 Security.ModesSupported - (None,WEP-64,WEP-128,WPA-Personal,WPA2-Personal,WPA-WPA2-Personal,WPA-Enterprise,WPA2-Enterprise,WPA-WPA2-Enterprise) R
   3.6 Security.ModeEnabled - current mode (e.g WPA2-Personal) RW
   3.7 Security.WEPKey - WEP key RW
   3.8 Security.PreSharedKey - pre-shared key RW
   3.9 Security.KeyPassphrase - key passphrase RW

Hotspot information: 

 1. General
   1.1 General.Enable - state (e.g. 1) RW
   1.2 General.IP - IP address (e.g. 192.168.2.254) RW
   1.3 General.Mode - authentication mode
         (extrad - External radius, intrad - Internal radius, norad - Without radius, add - Advertisement, mac - MAC auth, sms - SMS OTP) (e.g., norad) RW
   1.4 General.ExternalLandingPage - enable external landing page (e.g., 1) RW
   1.5 General.LandingPageAddress - external landing page address (e.g., www.landingpageaddr.com) RW
   1.6 General.HTTPSRedirect - enable HTTPS redirect RW
 2. Radius
   2.1 Radius.Server1 - first radius server address RW
   2.2 Radius.Server2 - second Radius server address RW
   2.3 Radius.AuthenticationPort - authentication port RW
   2.4 Radius.AccountingPort - accounting port RW
   2.5 Radius.RadiusSecretKey - radius secret key RW
   2.6 Radius.UAMPort - UAM port RW
   2.7 Radius.UAMUIPort - UAM UI port RW
   2.8 Radius.UAMSecret - UAM secret RW
   2.9 Radius.NASIdentifier - NAS identifier RW
   2.10 Radius.SwapOctets - swap octets RW
   2.11 Radius.LocationName - location name RW

Management server information: 

 1. ManagementServer.URL - server url (e.g., http://192.168.1.110:8080/openacs/acs) RW
 2. ManagementServer.Username - username (e.g., easycwmp) RW
 3. ManagementServer.Password - password (e.g., easycwmp) RW
 4. ManagementServer.PeriodicInformEnable - enable periodic inform (e.g., 1 or 0) RW
 5. ManagementServer.PeriodicInformInterval - interval (e.g, 100) RW
 6. ManagementServer.PeriodicInformTime - inform time (e.g, 0001-01-01T00:00:00Z) RW
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT850_TR-069&oldid=74998"