Talk:RUT955 Powering Options: Difference between revisions
(Creating Talk:RUT955 Powering Options (modified)) |
m (→Connector type) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 60: | Line 60: | ||
Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard. | Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard. | ||
== Connector type == | |||
I think, this information belongs to the Power socket section: | |||
The plug is of this type: https://www.molex.com/molex/products/part-detail/crimp_housings/0039013045. It is also used/known as a "ATX12V" or "(Intel) P4" power connector. | |||
Latest revision as of 09:38, 23 November 2020
RUT955 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device.
RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.
When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.
| Pin | Signal ID | T568A Color | T568B Color | Pins on plug face (socket is reversed) |
| 1 | TX+ |  white/green stripe |
 white/orange stripe |
|
| 2 | TX- |  green solid |
 orange solid | |
| 3 | RX+ | white/orange stripe |
white/green stripe | |
| 4 |  blue solid |
blue solid | ||
| 5 | 7 - 30 VDC |  white/blue stripe |
white/blue stripe | |
| 6 | RX- | orange solid |
green solid | |
| 7 | GROUND |  white/brown stripe |
white/brown stripe | |
| 8 | GROUND |  brown solid |
brown solid |
Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
Connector type
I think, this information belongs to the Power socket section:
The plug is of this type: https://www.molex.com/molex/products/part-detail/crimp_housings/0039013045. It is also used/known as a "ATX12V" or "(Intel) P4" power connector.