Difference between revisions of "Template:Networking rut30x manual input output status"
From Teltonika Networks Wiki
Gytispieze (talk | contribs) |
(Created page with "<pre> ioman.gpio.dio0 ioman.gpio.dio1 </pre> Call command <b>ubus call <i>value</i> status</b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "v...") |
||
(One intermediate revision by one other user not shown) | |||
Line 1: | Line 1: | ||
<pre> | <pre> | ||
− | ioman.gpio.dio0 | + | ioman.gpio.dio0 |
− | ioman.gpio.dio1 | + | ioman.gpio.dio1 |
</pre> | </pre> | ||
Line 15: | Line 15: | ||
<ul> | <ul> | ||
− | <li><b> | + | <li><b>din1</b> is the input: |
+ | <ul> | ||
+ | <li>"value": "<b>0</b>" means low level state.</li> | ||
+ | <li>"value": "<b>1</b>" means high level state.</li> | ||
+ | </ul> | ||
+ | </li> | ||
+ | <li><b>dout1</b> is the output: | ||
<ul> | <ul> | ||
<li>"value": "<b>0</b>" means low level state.</li> | <li>"value": "<b>0</b>" means low level state.</li> | ||
<li>"value": "<b>1</b>" means high level state.</li> | <li>"value": "<b>1</b>" means high level state.</li> | ||
− | |||
− | |||
</ul> | </ul> | ||
</li> | </li> | ||
</ul> | </ul> | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 12:24, 14 December 2020
ioman.gpio.dio0 ioman.gpio.dio1
Call command ubus call value status:
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "value": "0", "direction": "in", "bi_dir": false, "invert_input": false }
- din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
- dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.