Template:Rms manual management commands configuration: Difference between revisions

Latest revision as of 16:32, 3 February 2021

The Configure device option allows you to modify configuration for your selected device(s). To configure your devices go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Scroll your mouse pointer to the Top control Configuration menu and select Configure device (Configuration → Configure device).

The Configuration function is used to change configuration of devices selected from your device table. You will get different configuration options depending on the device.

Step by step instructions

Select the device(s) that you wish to configure.
Move your mouse pointer to the Configuration menu and click Configure device.
You will get a pop-up box, where you will be able to choose settings you want to configure.
Fill out the information and click Save button when ready.
In the next window will display configuration progress.
Click the Close button and close the Configure devices window.

Important!

Allow some time for your device(s) to load new settings. It might take some time.

@@ Line 1: / Line 1: @@
-The '''Configuration''' function is used to set Mobile and LAN configuration of devices selected from your device table.
+The '''Configure device''' option allows you to modify configuration for your selected device(s). To configure your devices go to the RMS web page, Left sidebar panel, (<b>Management → Devices</b>) and click on <b>Devices</b> submenu.
-----
-* First select the device(s) that you wish to configure:
-[[File:How to configure device from rms part 1 v1.png]]
-----
-* Scroll your mouse pointer to the Commands submenu ('''Management → Commands''') and click "Configuration":
-[[File:How to configure device from rms part 2 v2.png]]
+Scroll your mouse pointer to the Top control '''Configuration''' menu and select '''Configure device''' (Configuration → Configure device).
-----
-* You will be greeted with a pop-up box, where you will able to choose whether you want to configure Mobile or LAN settings. For "Mobile" you can change general SIM card settings ("'''Mobile Configuration'''") and Force LTE settings ("'''Force LTE network'''"); for "LAN" you can change general settings ("'''LAN Configuration'''") and DHCP server settings ("'''DHCP Server'''"):
-[[File:How to configure device from rms part 3 v3.png]]
+[[File:RMS-device-menu-left-sidebar-panel.jpg]] [[File:RMS-top-menu-configuration-mobile.jpg]]
-* You can find descriptions on the aforementioned settings by following these links:
+The '''Configuration''' function is used to change configuration of devices selected from your device table. You will get different configuration options depending on the device.
-** '''[[Mobile#General|Mobile Configuration]]'''
-** '''[[LAN#Configuration|LAN Configuration]]'''
-----
-* Once you have made the changes, you will redirected back to the pop-up box. It will display the changes that you have made and total number of changes. If you want to edit something, you can do it from here, or if you want to make additional changes, you can click on "Mobile" or "LAN" again (previously made changes will not be lost). When you're done with the configuration, click "Save":
-[[File:How to configure device from rms part 4 v2.png]]
+===Step by step instructions===
 ----
-* You will be prompted by a pop-up asking whether you really want to make the changes. If you're ready to proceed, click "Yes":
-[[File:How to configure device from rms part 5 v2.png]]
+# Select the device(s) that you wish to configure.
-----
+# Move your mouse pointer to the '''Configuration''' menu and click '''Configure device'''.
-* Your configuration should be applied briefly. You can see the status under the "Event" field of the next pop-up. When a green check mark appears, the configurations will have been applied:
+# You will get a pop-up box, where you will be able to choose settings you want to configure.
+# Fill out the information and click '''Save''' button when ready.
+# In the next window will display configuration progress.
+# Click the Close button and close the '''Configure devices''' window.
-[[File:How to configure device from rms part 6 v2.png]]
+'''<span style="color:#0455a4"><big>Important!</big></span>'''
+* Allow some time for your device(s) to load new settings. It might take some time.
+<br>