Difference between revisions of "Template:Networking rutos manual mobile"

From Teltonika Networks Wiki
(85 intermediate revisions by 10 users not shown)
Line 1: Line 1:
−
{{Template: Networking_device_manual_fw_disclosure
+
{{Template: Networking_rutos_manual_fw_disclosure
−
| series = {{{series}}}
+
| fw_version = {{{series}}}_R_00.02.06.1
−
| name  = {{{name}}}
+
| series     = {{{series}}}
−
| fw_version ={{Template: Networking_device_manual_latest_fw
 
−
| series = {{{series}}}
 
−
| name  = {{{name}}}
 
−
}}
 
 
}}
 
}}
−
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
+
{{#ifeq: {{{legacy}}} | 1 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT9XX_R_00.06.08.2 and earlier) user manual page.</i>|}}
−
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
 
 
==Summary==
 
==Summary==
  
Line 23: Line 18:
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
  
−
===SIM card settings===
+
===Operator settings===
 
----
 
----
−
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
+
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
  
−
 
+
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
−
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]
 
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 35: Line 29:
 
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
−
     </tr>{{#ifeq: {{{dualmodem}}} | 0 | {{#ifeq: {{{dualsim}}} | 1 |
+
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Default SIM</td>
+
       <td>Enable</td>
−
      <td>off {{!}} on; default: <b>on</b></td>
 
−
      <td>Sets this SIM slot as the default one.</td>
 
−
    </tr>|}} |}}
 
−
    <tr>
 
−
      <td>Deny data roaming</td>
 
 
       <td>off | on; default: <b>off</b></td>
 
       <td>off | on; default: <b>off</b></td>
−
       <td>Denies data connection on roaming conditions.</td>
+
       <td>Enables Whitelist or Blacklist for specified operator list.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>PIN</td>
+
       <td>Mode</td>
−
       <td>integer [0000..99999999]; default: <b>none</b></td>
+
       <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
−
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
+
       <td>Mode to be applied for operator list.<br>
−
    </tr>
 
−
</table>
 
−
 
 
−
===Interface mob1s1a1 APN configuration===
 
−
 
 
−
[[File:Networking rutos manual mobile general interface configuration.png|border|class=tlt-border]]
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Auto APN</td>
 
−
      <td>on | <span style="color:red">off</span>; default: <b>on</b></td>
 
−
      <td>Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database )</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>APN</td>
 
−
      <td>string; default: <b>none</b></td>
 
−
      <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:
 
 
             <ul>
 
             <ul>
−
                 <li>rac;</li>
+
                 <li>Whitelist - only allow operators in list</li>
−
                <li>lac;</li>
+
                 <li>Blacklist - block all operators in list</li>
−
                <li>sgsn;</li>
+
             </ul>
−
                 <li>rnc;</li>
 
−
            </ul>it cannot end in:
 
−
            <ul>
 
−
                <li>.gprs;</li>
 
−
             </ul>and it cannot contain the asterisk symbol (<b>*</b>).
 
 
         </td>
 
         </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td><span style="color:red">Authentication type</span></td>  
+
       <td>Operator list</td>
−
       <td>None | <span style="color:green">PAP | CHAP</span>; default: <b>None</b></td>
+
       <td>operator list; default: <b>none</b></td>
−
       <td>Authentication method that your carrier uses to authenticate new connections on it's network</td>
+
       <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
−
    </tr>
 
−
    <tr>
 
−
      <td><span style="color:green">Username</span></td>
 
−
      <td>string; default: <b>empty</b></td>
 
−
      <td>Username provided by your carrier</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td><span style="color:green">Password</span></td>
 
−
      <td>string; default: <b>empty</b></td>
 
−
      <td>Password provided by your carrier</td>
 
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
−
==Connection==
+
===SIM card settings===
−
 
+
----
−
===Connection===
+
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
−
 
 
−
{{#switch: {{{name}}}
 
−
|#default = [[File:Networking_rutos_manual_mobile_connection_connection.png|border|class=tlt-border]]
 
−
|TRB245|RUT956|RUT951|RUT906|RUT901|RUT241 = [[File:Networking_rutos_manual_mobile_connection_connection_2g.png|border|class=tlt-border]]
 
−
|TRB256 = [[File:Networking_rutos_manual_mobile_connection_connection_trb2m.png|border|class=tlt-border]]
 
−
|RUTX50|TRB500|RUTM50|RUTC50 = [[File:Networking_rutos_manual_mobile_connection_connection_5g.png|border|class=tlt-border]]}}
 
  
 +
{{#ifeq: {{{dualmodem}}} | 1 |
 +
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings_dualmodem.png|border|class=tlt-border]] |
 +
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]}}
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 116: Line 65:
 
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
−
     </tr>{{#switch:{{{name}}}|RUT230|TRB255|TRB256=|#default=
+
     </tr>{{#ifeq: {{{dualmodem}}} | 0 | {{#ifeq: {{{dualsim}}} | 1 |
 +
    <tr>
 +
      <td>Default SIM</td>
 +
      <td>off {{!}} on; default: <b>on</b></td>
 +
      <td>Sets this SIM slot as the default one.</td>
 +
    </tr>|}} |}}
 
     <tr>
 
     <tr>
−
       <td>VoLTE</td>
+
       <td>Deny data roaming</td>
−
       <td>Auto {{!}} On {{!}} Off; default: <b>Auto</b></td>
+
       <td>off | on; default: <b>off</b></td>
−
       <td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td>
+
       <td>Denies data connection on roaming conditions.</td>
−
     </tr>}}
+
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Preferred network type</td>
+
       <td>Service mode</td>
−
       <td>{{#switch: {{{series}}}
+
       <td>Auto | {{#switch: {{{series}}}
−
|RUTX|RUTM|RUTC = {{#switch: {{{name}}}
+
| RUTX = 4G (LTE) only {{!}} 3G only
−
        |RUTX50|RUTM50|RUTC50 = 5G/4G/3G auto {{!}} 5G/4G auto {{!}} 4G/3G auto {{!}} 5G only {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
+
| TRB1 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
−
        |#default = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
+
| TRB2 = {{#switch: {{{name}}}
−
|TRB5 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
+
         | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
−
|RUT36X|TCR1|RUT361|TRB16 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
+
         | TRB255 = 4G (LTE) only {{!}} 2G only}}
−
|TRB1|RUT9|RUT9M = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
+
}}; default: <b>Auto</b></td>
−
|RUT2M = {{#switch: {{{name}}}
 
−
        |RUT241|RUT200 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
 
−
        |RUT260 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
 
−
|TRB2 = {{#switch: {{{name}}}
 
−
         |TRB245 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
 
−
         |TRB255 = 4G/2G auto {{!}} 4G only {{!}} 2G only; default: <b>4G/2G auto</b>}}
 
−
|TRB2M = {{#switch: {{{name}}}
 
−
        |TRB246 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
 
−
|RUT2 = {{#switch: {{{name}}}
 
−
        |RUT230 = 3G/2G auto {{!}} 3G only {{!}} 2G only; default: <b>3G/2G auto</b>
 
−
        |RUT240 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
 
−
}}</td>
 
 
       <td>Network connection type preference.</td>
 
       <td>Network connection type preference.</td>
−
     </tr>{{#switch: {{{name}}} |TRB255|TRB256=
+
     </tr>{{#ifeq: {{{name}}} | TRB255 |
 
     <tr>
 
     <tr>
 
       <td>Network Category</td>
 
       <td>Network Category</td>
−
       <td>M1+NB auto {{!}} M1 only {{!}} NB only; default: <b>M1+NB auto</b></td>
+
       <td>M1 only {{!}} NB only {{!}} Auto; default: <b>M1 only</b></td>
−
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Network type is set to <i>4G/2G auto {{!}} 4G only</i>.</td>
+
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Service mode is set to <i>4G (LTE) only</i>.</td>
−
     </tr>|#default=}}
+
    </tr>|}}
 +
    <tr>
 +
      <td>PIN</td>
 +
      <td>integer [0000..999999999999]; default: <b>none</b></td>
 +
      <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 12 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
 +
     </tr>{{#ifeq: {{{series}}} | RUTX |
 
     <tr>
 
     <tr>
 
       <td>Band selection</td>
 
       <td>Band selection</td>
−
       <td>Auto | Manual; default: <b>Auto</b></td>
+
       <td>Auto {{!}} Manual; default: <b>Auto</b></td>
−
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only.</td>
+
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
−
     </tr>
+
     </tr>|}}
 
</table>
 
</table>
  
−
 
+
===SMS limit settings===
−
===Low signal reconnect===
 
 
----
 
----
−
The <b>Low signal reconnect</b> section is used to configure modem operator connection resetting based on signal strength {{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
+
The <b>SMS Limit Settings</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
  
−
[[File:Networking_rutos_manual_mobile_general_low_signal_reconnect_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_general_sms_limit_settings.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 171: Line 117:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Enable</td>
+
       <td>Enable SMS Limit</td>
 
       <td>off | on; default: <b>off</b></td>
 
       <td>off | on; default: <b>off</b></td>
−
       <td>Enables Low signal reconnect.</td>
+
       <td>Turns SMS limiting on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Reset threshold</td>
+
       <td>SMS limit count</td>
−
      <td>integer [-120..-50]; default: <b>none</b></td>
 
−
      <td>Signal threshold in dB for the connection. When signal is under this value modem resets connection.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Reset timeout</td>
 
−
      <td>integer [15..65535]; default: <b>600</b></td>
 
−
      <td>Time for the device to wait in seconds before trying to reset the connection again.</td>
 
−
    </tr>
 
−
</table>
 
−
 
 
−
 
 
−
==Limits==
 
−
 
 
−
===Data limit===
 
−
----
 
−
The <b>Data Limit</b> section provides you with the possibility to set up a maximum used data cap for your SIM card.
 
−
 
 
−
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_data_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
 
−
 
 
−
To configure <b>Data Limit</b> press <b>Edit</b>
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Enable data connection limit</td>
 
−
      <td>off | on; default: <b>off</b></td>
 
−
      <td>Disables mobile data when the limit for the current period is reached</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Data limit (MB)</td>
 
 
       <td>integer; default: <b>none</b></td>
 
       <td>integer; default: <b>none</b></td>
−
       <td>Disable mobile data after the limit value in MB is reached</td>
+
       <td>Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Reset period</td>
+
       <td>Period</td>
 
       <td>Day | Week | Month; default: <b>Day</b></td>
 
       <td>Day | Week | Month; default: <b>Day</b></td>
−
       <td>Interval for resetting mobile data usage limit.</td>
+
       <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Reset time</td>
+
       <td>Clear SMS Limit</td>
−
      <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
 
−
      <td>Specify the hour (in 24-hour format) when the mobile data limit reset occurs.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Enable SMS warning</td>
 
−
      <td>on | off; default: <span style="color:red"><b>off</b></span></td>
 
−
      <td>Enables sending of warning SMS message when mobile data limit is reached.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td><span style="color:red">Warning threshold</span></td>
 
−
      <td>integer; default: <b>none</b></td>
 
−
      <td>Send warning SMS message after threshold in MB is reached. Warning threshold cannot be higher than data limit!</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td><span style="color:red">Phone number</span></td>
 
−
      <td>integer; default: <b>none</b></td>
 
−
      <td>A phone number to send warning SMS message to</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Clear collected data</td>
 
 
       <td>- (interactive button)</td>
 
       <td>- (interactive button)</td>
−
       <td>The data collected for this interface will be cleared, but only if the interface is active</td>
+
       <td>Clears the SMS limit counter for the selected period.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
+
{{#ifeq: {{{ussd}}} | 1 |
−
===SMS limit===
+
===USSD===
−
 
 
 
----
 
----
−
The <b>SMS Limit</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
+
<b>Unstructured Supplementary Service Data (USSD)</b> is communication protocol used in communication between cellular devices and mobile network operators. It is usually used with prepaid SIM cards to enable/disable certain services or to obtain information from a network operator.
  
−
{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_sms_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
+
This section provides the possibility to send USSD messages to the mobile operator.
−
 
 
−
----
 
−
To configure <b>SMS Limit</b> press <b>Edit</b>
 
  
−
[[File:Networking_rutos_manual_mobile_limit_sms_limit_configuration.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_general_ussd.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 265: Line 153:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Enable SMS Limit</td>
+
       <td>USSD</td>  
−
       <td>off | on; default: <b>off</b></td>
+
       <td>string; default: <b>none</b></td>
−
       <td>Turns SMS limiting on or off.</td>
+
       <td>Enter a USSD code (up to 182 character) that you wish to send. To send the entered USSD code, click the 'Send' button below the Response box.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>SMS limit count</td>
+
       <td>Response message</td>  
−
       <td>integer; default: <b>none</b></td>
+
       <td>string; default: <b>No response yet</b></td>
−
       <td>Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.</td>
+
       <td>Displays the response to the last sent USSD message. Receiving the response may take up to a minute.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Period</td>
+
       <td>Send</td>  
−
      <td>Day | Week | Month; default: <b>Day</b></td>
 
−
      <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Reset time</td>
 
−
      <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
 
−
      <td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Clear SMS Limit</td>
 
 
       <td>- (interactive button)</td>
 
       <td>- (interactive button)</td>
−
       <td>Clears the SMS limit counter for the selected period.</td>
+
       <td>Click to send the message entered in the USSD field.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
 
+
|}}{{#ifeq: {{{dualsim}}} | 1 |
−
{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
+
<h2>SIM Switch</h2>
−
==SIM Switch==
 
  
 
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
 
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
  
−
[[File:Networking_rutos_manual_mobile_sim_switch_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_sim_switch.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 311: Line 188:
 
     <tr>
 
     <tr>
 
       <td>Check interval</td>
 
       <td>Check interval</td>
−
       <td>integer [3..3600]; default: <b>30</b></td>
+
       <td>integer [3..3600]; default: <b>10</b></td>
 
       <td>The frequency (in seconds) at which the device will check for SIM switch conditions. If such a condition exists, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field passes.</td>
 
       <td>The frequency (in seconds) at which the device will check for SIM switch conditions. If such a condition exists, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field passes.</td>
 
     </tr>
 
     </tr>
−
    <tr>
 
 
       <td>Attempts before SIM switch</td>
 
       <td>Attempts before SIM switch</td>
 
       <td>integer [1..10]; default: <b>3</b></td>
 
       <td>integer [1..10]; default: <b>3</b></td>
Line 320: Line 196:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>On weak signal<span style="color:red">*</span></td>
+
       <td>On weak signal</td>
 
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
−
    </tr>
 
−
    <tr>
 
−
      <td><span style="color:red">*Signal strength (dBm)</span></td>
 
−
      <td>integer [-120..-50]; default: <b>-90</b></td>
 
−
      <td>Lowest signal's strength value (RSSI) in dBm below which a SIM card switch should occur. More information: [[RSSI|RSSI]]</td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 386: Line 257:
 
       <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
 
       <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
 
     </tr>
 
     </tr>
−
</table>|}}|}}
+
</table>|}}
 +
==Network operators==
 +
 
 +
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}
  
−
{{#switch: {{{name}}}|TRB255|TRB256= |#default=
+
[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}.png|border|class=tlt-border]]
−
==Network selection==
 
−
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}|}}
 
  
−
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualmodem.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
 
−
}}
 
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 399: Line 269:
 
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
−
     </tr>{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
+
     </tr>{{#ifeq: {{{dualsim}}} | 1 |
 
     <tr>
 
     <tr>
 
       <td>Active SIM</td>  
 
       <td>Active SIM</td>  
 
       <td>SIM 1 {{!}} SIM 2; default: <b>SIM 1</b></td>
 
       <td>SIM 1 {{!}} SIM 2; default: <b>SIM 1</b></td>
 
       <td>Displays which SIM card is currently active.</td>
 
       <td>Displays which SIM card is currently active.</td>
−
     </tr>|
+
     </tr>|}}
−
    <tr>
 
−
      <td>Modem</td>
 
−
      <td>Primary modem {{!}} Secondary modem; default: <b>Primary modem</b></td>
 
−
      <td>Operator scanning will be performed on the chosen modem.</td>
 
−
    </tr>}} |}}
 
 
     <tr>
 
     <tr>
 
       <td>Current operator</td>  
 
       <td>Current operator</td>  
Line 417: Line 282:
 
     <tr>
 
     <tr>
 
       <td>Connection mode</td>  
 
       <td>Connection mode</td>  
−
       <td>Auto {{!}} Manual {{!}} Manual-Auto; default: <b>Auto</b></td>
+
       <td>Auto | Manual; default: <b>Auto</b></td>
 
       <td>Operator selection method.
 
       <td>Operator selection method.
 
             <ul>
 
             <ul>
Line 425: Line 290:
 
         </td>
 
         </td>
 
     </tr>
 
     </tr>
−
</table>}}
+
</table>
  
 
===Manual operator selection===
 
===Manual operator selection===
 
----
 
----
−
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
+
To select an operator manually, specify <b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
  
−
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v2.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]] }}
+
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}.png|border|class=tlt-border]]
  
−
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
+
Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_2.png|border|class=tlt-border]]
  
 
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
 
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3.png|border|class=tlt-border]]
 
----
 
----
−
Once the scan has finished, you will see the results in the 'Available operators'.  
+
Once the scan has finished, you will see the results in the 'Operators List'.  
  
−
[[File:Networking_rutos_manual_mobile_network_operators_operators_list_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_operators_list.png|border|class=tlt-border]]
  
−
In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.
+
In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.
  
 
===Operators list===
 
===Operators list===
Line 452: Line 317:
 
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
 
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
  
−
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v1.png|border|class=tlt-border]]
  
 
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]  
 
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]  
 
on a list you will be redirected to editing page in which you can enter operator codes for that list.
 
on a list you will be redirected to editing page in which you can enter operator codes for that list.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v3.png|border|class=tlt-border]]}}
+
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v1.png|border|class=tlt-border]]
−
 
 
−
==Utilities==
 
−
 
 
−
===SIM PIN management===
 
−
 
 
−
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking rutos manual mobile utilities sim pin dualmodem.png|border|class=tlt-border]] | [[File:Networking rutos manual mobile utilities sim pin.png|border|class=tlt-border]]}}
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>SIM card lock</td>
 
−
      <td>off | on; default: <b>off</b></td>
 
−
      <td>Correct PIN code is required to enable or disable SIM card lock. Once SIM card lock is disabled you will not need to enter PIN code on any device to use SIM card.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Change PIN</td>
 
−
      <td>- (interactive button)</td>
 
−
      <td>Open modal window to change SIM PIN</td>
 
−
    </tr>
 
−
</table>
 
−
 
 
−
{{#ifeq: {{{ussd}}} | 1 |
 
−
===USSD===
 
−
----
 
−
<b>Unstructured Supplementary Service Data (USSD)</b> is communication protocol used in communication between cellular devices and mobile network operators. It is usually used with prepaid SIM cards to enable/disable certain services or to obtain information from a network operator.
 
−
 
 
−
This section provides the possibility to send USSD messages to the mobile operator.
 
−
 
 
−
[[File:Networking_rutos_manual_mobile_general_ussd_v2.png|border|class=tlt-border]]
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>USSD</td>
 
−
      <td>string; default: <b>none</b></td>
 
−
      <td>Enter a USSD code (up to 182 character) that you wish to send. To send the entered USSD code, click the 'Send' button below the Response box.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Send</td>
 
−
      <td>- (interactive button)</td>
 
−
      <td>Click to send the message entered in the USSD field.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Response message</td>
 
−
      <td>string; default: <b>No response yet</b></td>
 
−
      <td>Displays the response to the last sent USSD message. Receiving the response may take up to a minute.</td>
 
−
    </tr>
 
−
</table>
 
−
|}}
 
−
 
 
−
===PIN/PUK lock notification===
 
−
----
 
−
If you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked.  Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes.
 
−
 
 
−
Side message where the SIM is locked
 
−
[[File:Networking_rutos_manual_mobile_general_pin.png|border|class=tlt-border]]
 
−
 
 
−
Side message where the SIM is blocked
 
−
[[File:Networking_rutos_manual_mobile_general_puk.png|border|class=tlt-border]]
 
−
 
 
−
[[File:Networking_rutos_manual_mobile_general_pin_puk.png|border|class=tlt-border]]
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>PIN</td>
 
−
      <td>4-8 positive numeric chars (positive number); default: <b>none</b></td>
 
−
      <td>SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>PUK</td>
 
−
      <td>8 positive numeric chars (positive number); default: <b>none</b></td>
 
−
      <td>SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code</td>
 
−
    </tr>
 
−
</table>
 
−
 
 
−
==APN Database==
 
−
 
 
−
APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records.
 
−
<b>Note:</b> APN Database is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 
−
 
 
−
[[File:Network rutos mobile apn database.png|border|class=tlt-border]]
 
−
 
 
−
===Adding new APN===
 
−
----
 
−
In order to create new APN to database, insert required information and click Add button.
 
−
 
 
−
[[File:Network rutos mobile apn database add button.png|border|class=tlt-border]]
 
−
 
 
−
[[File:Network rutos mobile apn database entry configuration.png|border|class=tlt-border]]
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Carrier name</td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider. </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td>Mobile Country Code</td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs. </td>
 
−
    </tr>
 
−
    <tr>
 
−
        <td>Mobile Network Code</td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator. </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td>APN</td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td>PDP type</td>
 
−
      <td>IPv4/IPv6 | IPv4 | IPv6; default: <b>IPv4/IPv6</b></td>
 
−
      <td>Specifies what type of address is requested from the operator </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td>Authentication type</td>
 
−
      <td>none | <span style="color:red">PAP</span> | <span style="color:red">CHAP</span>; default: <b>none</b></td>
 
−
      <td>Authentication method that your GSM carrier uses to authenticate new connections on it's network </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td><span style="color:red">Username</span></td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>Your username that you would use to connect to your GSM carrier's network </td>
 
−
    </tr> 
 
−
    <tr>
 
−
        <td><span style="color:red">Password</span></td>
 
−
      <td>default: <b>empty</b></td>
 
−
      <td>Your password that you would use to connect to your GSM carrier's network </td>
 
−
    </tr>
 
−
</table>
 
−
 
 
−
{{#ifeq: {{{dualsim}}} | 1 |
 
−
==SIM Idle Protection==
 
−
Some operators block user SIM cards after a period of inactivity. The <b>SIM Idle Protection</b> tab provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.
 
−
 
 
−
<b>Note:</b> SIM Idle Protection is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 
−
 
 
−
[[File:Networking_rutos_mobile_sim_idle_protection.png|border|class=tlt-border]]
 
−
 
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Enable</td>
 
−
      <td>off {{!}} on; default: <b>off</b></td>
 
−
      <td>Turns SIM Idle Protection on or off.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Period</td>
 
−
      <td>Month {{!}} Week; default: <b>Month</b></td>
 
−
      <td>How often SIM Idle Protection will be performed. Use the two following fields ('Day' and 'Time') to set the exact time of the action.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Day</td>
 
−
      <td>integer [1..30]; default: <b>1</b></td>
 
−
      <td>TThe day of the month on which SIM Idle Protection will be performed.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Time</td>
 
−
      <td>hh:mm; default: <b>01:00</b></td>
 
−
      <td>The time when SIM Idle Protection will be performed.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>IP type</td>
 
−
      <td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
 
−
      <td>IP type to be used for ping.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Host to ping</td>
 
−
      <td>ip; default: <b>8.8.8.8</b></td>
 
−
      <td>IP address of a host that will be pinged during the SIM Idle Protection action.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Ping package size</td>
 
−
        <td>integer [1..1000]; default: <b>56</b></td>
 
−
        <td>ICMP packet size in bytes.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Ping requests</td>
 
−
        <td>integer [1..30]; default: <b>2</b></td>
 
−
        <td>How many ping requests will be sent.</td>
 
−
    </tr>
 
−
</table>|}}
 
  
 
[[Category:{{{name}}} Network section]]
 
[[Category:{{{name}}} Network section]]

Revision as of 09:09, 8 June 2021

Template:Networking rutos manual fw disclosure

Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

Operator settings

The Operator Settings section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist).

Networking rutx12 manual mobile general operator settings v1.png

Field Value Description
Enable off | on; default: off Enables Whitelist or Blacklist for specified operator list.
Mode Whitelist | Blacklist; default: Whitelist Mode to be applied for operator list.
  • Whitelist - only allow operators in list
  • Blacklist - block all operators in list
Operator list operator list; default: none A list of operators which can be configured in Operators List page.

SIM card settings

The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.

[[File:Networking_{{{series}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]

Field Value Description
Deny data roaming off | on; default: off Denies data connection on roaming conditions.
Service mode Auto | ; default: Auto Network connection type preference.
PIN integer [0000..999999999999]; default: none SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 12 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored.

SMS limit settings

The SMS Limit Settings section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

Networking rutos manual mobile general sms limit settings.png

Field Value Description
Enable SMS Limit off | on; default: off Turns SMS limiting on or off.
SMS limit count integer; default: none Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period Day | Week | Month; default: Day Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Clear SMS Limit - (interactive button) Clears the SMS limit counter for the selected period.

Network operators

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}.png|border|class=tlt-border]]

Field Value Description
Current operator string; default: none Displays the name of the operator the which the device is currently connected.
Connection mode Auto | Manual; default: Auto Operator selection method.
  • Auto - selects the operator automatically.
  • Manual - requires you to select the operator manually. (More on this selection below.)

Manual operator selection

To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.

Networking rutos manual mobile network operators scan process step 2.png

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Networking rutos manual mobile network operators scan proccess step 3.png

Once the scan has finished, you will see the results in the 'Operators List'.

Networking rutos manual mobile network operators operators list.png

In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.

Operators list

This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).

Networking rutos manual mobile network operators list management v1.png

By clicking Edit Networking rutx manual edit button v1.png on a list you will be redirected to editing page in which you can enter operator codes for that list.

Networking rutos manual mobile network operators list edit v1.png

[[Category:{{{name}}} Network section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile&oldid=80754"