RUT950 VRRP (legacy WebUI): Difference between revisions

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_rut_manual_vrrp_legacy <!------------------------DEVICE-----------------------> | name = RUT950 | series = RUT9XX }}")
 
m (Dziugas moved page Draft:RUT950 VRRP (legacy WebUI) to RUT950 VRRP (legacy WebUI) without leaving a redirect)
 
(No difference)

Latest revision as of 12:18, 19 July 2021

Main Page > EOL Products > RUT950 > RUT950 Manual > RUT950 Legacy WebUI > RUT950 Services section (legacy) > RUT950 VRRP (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.5.

Note: this user manual page is for RUT950's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol used for automatic default gateway selection for clients on a LAN network in case the main router (Master) becomes unavailable. Another VRRP router (Backup) then assumes the role of Master and thus backing up the connection.

This chapter of the user manual provides an overview of the VRRP page for RUT950 devices.

VRRP configuration

The VRRP LAN configuration settings section is used to set the main settings of VRRP. Refer to the figure and table below for information on the fields contained in that section.

Field Value Description
Enable yes | no; default: no Turns VRRP on or off.
Virtualize MAC yes | no; default: none Turns the possibility to use virtual MAC addresses on or off.
Virtual ID integer [1..255]; default: 1 The Virtual Router Identifier (VRID) is a field in the VRRP packet IP header used to identify the virtual router in the VRRP cluster. Routers with identical IDs will be grouped in the same VRRP cluster.
Priority integer [1..255]; default: 100 VRRP priority of the virtual router. Higher values equal higher priority. The router with the highest priority is considered to be the Master router while other routers are Backup routers.
    sends periodic VRRP Advertisement messages
  • Master router - the first hop router in the VRRP cluster (i.e., the router that provides connectivity to LAN devices by default).
  • Backup router - assumes the role of Master router in case it becomes unavailable. If there multiple Backup routers in the VRRP cluster, the one with the highest priority will assume the role of Master.
Advertisement Interval integer [1..255]; default: 1 Time interval in seconds between advertisements
Interface network interface; default: LAN Selects which interface VRRP will operate on.
IP address ip; default: none Virtual IP address for the router's VRRP cluster.

See also