Difference between revisions of "Template:Networking rut2xx firmware change log"

From Teltonika Networks Wiki
(33 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18===
+
===='''[[Media:RUT2XX R 00.01.14.4 WEBUI.bin|RUT2XX_R_00.01.14.4]]''' | 2021.10.11====
  
−
* <b>New</b>
+
* New features:
−
** nftables support
+
** Added MeigLink SLM750-VAU support
 +
** Added ping to DNS feature for mobile
  
−
* <b>Improvement</b>
+
* Fixes:
−
** <b>Network</b>
+
** Patched CVE-2021-33909 vulnerability
−
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
+
** Patched CVE-2019-14834 vulnerability
−
*** Improved SIM detection algorithm
+
** Patched CVE-2021-37600 vulnerability
−
*** Improved Multi-APN connection establishment time
+
** Fixed VoLTE configuration for EC25-V modules
−
** <b>WebUI</b>
+
** Fixed seting band issues
−
*** Improved Overview page performance
+
** Fixed RMS rscp, ecio, rsrp, sinr and rsrq values
−
** <b>System</b>
+
 
−
*** Changed hostname to router name
+
===='''[[Media:RUT2XX R 00.01.14.3 WEBUI.bin|RUT2XX_R_00.01.14.3]]''' | 2021.08.17====
−
*** Updated OpenSSL to version 1.1.1t
+
 
−
*** Updated CA certificates to version 20211016
+
* New features:
−
*** Updated libiwinfo to version 2022-08-19
+
** Added MeigLink SLM750-VSA and SLM750-VJ support
 +
** Added MeigLink SLM750-VJ manual frequency band selection
 +
** Added MQTT Modbus Gateway keep alive option
 +
 
 +
* Improvements:
 +
** Added conntrack flush after IPsec connection
 +
 
 +
* Fixes:
 +
** Fixed hardware information config corruption when applying backup
 +
** Fixed backup archive validation
 +
** Fixed redirecting to correct IP address after firmware upgrade with keep settings
 +
** Fixed Modbus Master Alarms enabling
 +
 
 +
===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02====
 +
 
 +
* New features:
 +
** MeigLink SLM750 Australian module support
 +
 
 +
* Improvements:
 +
** Added CallFailed error handling
 +
** Updated APN database with OTA BELL ME operator APN
 +
** Added Client ID option to Data to Server
 +
** Added band selection support for Meiglink SLM750
 +
** Added band parsing to mobile library
 +
** OpenSSL updated to version 1.1.1k
 +
 
 +
* Fixes:
 +
** Fixed signal strength LED handling for Meiglink modems
 +
** Fixed backup generating without packages
 +
** Fixed service mode handling for Meiglink SLM750 modems
 +
** Fixed band handling when switching service modes
 +
** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
 +
** Fixed IPsec Passthrough function handling
 +
** Fixed Package Manager package install crash on reboot
 +
** Fixed modem FW version show for Meiglink SLM750
 +
** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
 +
** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
 +
** Fixed IPSec Pre-shared key option validation
 +
** Added security Wireless fixes for the FragAttacks vulnerabilities
 +
 
 +
===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
 +
 
 +
* New features:
 +
** PPPoE wired WAN
 +
** WiFi Multiple AP configuration page
 +
 
 +
* Improvements:
 +
** Added SHA1 HMAC hash support to dropbear (SSH server/client)
 +
** Updated libpcap to version 19.1
 +
** Updated sqlite3 to version 3.33
 +
** Updated curl to version 7.74
 +
** Updated ncurses to version 6.2
 +
** Updated pcre to version 8.44
 +
** Updated iptables to version 1.6.2
 +
** Added hard request, alarm and slave limits to MODBUS TCP Master
 +
** Added USB ZLP flag to avoid mobile network loss
 +
** Added new gsmctl command that returns operator names
 +
** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
 +
 
 +
* Fixes:
 +
** Fixed CVE-2019-9755
 +
** Fixed CVE-2018-16789
 +
** Fixed CVE-2020-12762
 +
** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
 +
** Fixed revision buffer size for Operator Control
 +
** Fixed operator selection logic
 +
** Fixed default PPTP route option handling
 +
** Fixed display of DDNS Hostname, Username and Password options when custom service is selected
 +
** Fixed incorrect VLAN ID range
 +
** Fixed IPsec start after reboot issue
 +
** Fixed IPsec cache issues
 +
** Fixed firewall rule execution when QoS is not enabled
 +
** Fixed ZeroTier crashing issues
 +
** Fixed Events Log Reporting sending email with attached file
 +
** Fixed unexpected Package Manager crash while installing unsupported packages
 +
** Fixed static mobile routes after modem restart
 +
** Fixed routing issue with mobile PPP connection type
 +
** Fixed double entries after firmware upgrade with keep settings on Output Scheduler
 +
** Fixed Hotspot freeze on launch with certain config bug
 +
** Fixed wireless device frequency and channel display in wireless widget
 +
** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration
 +
 
 +
===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26====
 +
 
 +
* Fixes:
 +
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
 +
** Fixed SSH reachable over SIM IP in early boot
 +
 
 +
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
 +
 
 +
* Fixes:
 +
** Added openvpn patch to fix CVE-2020-11810
 +
** Updated openssl to version 1.1.1i
 +
** Added dnsmasq patch for CVE-2019-14834
 +
** Added strongswan patch to fix CVE-2018-10811
 +
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
 +
** Updated uci to version 2019-09-01
 +
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
 +
** Fixed factory reset on button that wouldn't perform a complete settings wipe
 +
 
 +
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
 +
 
 +
* Fixes:
 +
** Randomized the global rate limiter to mitigate "SAD DNS" attack
 +
 
 +
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
 +
 
 +
* New features:
 +
** IPsec Xauth
 +
** IPsec Passthrough
 +
 
 +
* Improvements:
 +
** Added Input/Output default chain policy selections for firewall zones
 +
** Removed IPv6 related options from Setup Wizard
 +
** Improved WebUI page loading speed
 +
** Added a possibility to set MQTT credentials for Modbus Data Sender
 +
** Added options to keep connection open for Modbus TCP Slave
 +
** Added TLS certificate options to HTTP(S) data sending for Modbus data
 +
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
 +
** Added IPsec aggressive host enable option
 +
** Expanded IPSec identifier validation
 +
** Added WiFi SSID field validation
 +
** Changed IP leasing sequence in mobile Passthrough mode
 +
** Added SHA512 support
 +
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
 +
** Added uploaded package signature verification to Package Manager
 +
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
 +
** Changed default WAN Failover values
 +
** Simplified key combination for opening a new CLI tab
 +
 
 +
* Fixes:
 +
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
 +
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
 +
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
 +
** Fixed configuration field validations in the Modbus MQTT gateway page
 +
** Fixed MQTT topic validation in Modbus pages
 +
** Fixed configuration field validations in the ThingWorx page
 +
** Fixed Periodic Output Control table layout
 +
** Fixed security related issues to file uploading and HTTP headers
 +
** Fixed adding new L2TP and PPTP instances on non-English WebUI
 +
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
 +
** Fixed WiFi SSID string handling in fix_sta_ap.sh
 +
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
 +
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
 +
** Fixed table design in the System → Administration → Access Control → Safety page
 +
** Fixed not setting iptables rules for mobile interface
 +
** Fixed saving APN after firmware upgrade
 +
** Fixed default mobile MTU setting
 +
** Fixed access to LAN page when mobile Bridge mode is enabled
 +
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
 +
** Removed IPv6 Subprefix Hint field from the Network → LAN page
 +
** Fixed DNS push from OpenVPN server
 +
** Fixed L2TP over IPsec with Android 10
 +
** Removed crt_rms deprecated service
 +
** Fixed RMS collecting data usage
 +
** Fixed mobile status error for Load Balancing
 +
** Fixed WAN MAC address value in SMS Utilities command response
 +
** Fixed answer delay for Call Utilities commands
 +
** Fixed key combination not working
 +
** Removed Wireguard from the Network → Status page when this package is not installed
 +
** Changed SNMP RX, TX object types to uint64
 +
 
 +
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
 +
 
 +
* Improvements:
 +
** Improved RMS connection establishment
 +
 
 +
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
 +
 
 +
*Fixes:
 +
**Fixed Verizon operator APN configuration
 +
 
 +
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
 +
 
 +
*Fixes:
 +
**Fixed AT&T operator APN
 +
 
 +
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
 +
 
 +
*New features:
 +
**Added sms remote configuration option
 +
**Added "Enable HTTPS" option in "Access Control" page
 +
**Added network frequency band select support for EG25-G modem
 +
**Added additional service mode options to setup wizard
 +
**Added Japanese language support
 +
**Added TLS support to MQTT publisher
 +
**Added mqtt subscriber support
 +
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
 +
**Added ability to install packages stored in backup file
 +
**Full Unicode SMS support
 +
**Added time sync from operator station
 +
**Added ntpclient failover to operator station sync
 +
*Improvements:
 +
**Removed wep encryption from WiFi settings
 +
**Added profile scheduler and default configuration profile
 +
*Fixes:
 +
**Fixed TR-069 wan type value
 +
**removed GRE tunnel option in Events reporting
 +
**Removed config update from server option
 +
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
 +
**Fixed not showing Hotspot users upload/download statistics
 +
**Added ability to write hyphens to static lease hostname.
 +
**Fixed RAM usage display
 +
**Fixed password change URL after firstboot
 +
**Removed change password error message after firstboot
 +
**Fixed Web access Control via SMS Utilities
 +
**Fxed signal strength logging and reporting
 +
 
 +
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
 +
 
 +
*Fixes:
 +
**Fixed RMS not displaying data when using WiFi
 +
**Fixed RMS not displaying WAN IP with WAN failover
 +
 
 +
===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
 +
 
 +
*Fixes:
 +
**TR-069 WAN type value fix
 +
**RMS batch number instead of product code bug fix
 +
**Added missing HMAC options and PKCS12 support to OpenVPN
 +
 
 +
===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
 +
 
 +
*New features:
 +
**Auto APN
 +
**SMS Utilities Auto APN toggling
 +
**Operators control & support for JioAPN
 +
**Package Manager
 +
**RMS wireless monitoring
 +
**Port based VLAN configuration
 +
**I/O power socket pinout image
 +
**VRRP advertisement interval option
 +
 
 +
*Improvements:
 +
**UPnP updated to version 2.1
 +
**SIM switching optimizations
 +
**Faster SSH private key generation on first boot
 +
**Added network, serving and neighbor cell information to Troubleshoot files
 +
 
 +
*Fixes:
 +
**Wget Reboot minimal interval for action 'reboot' added
 +
**Ping Reboot packet size 0 fix
 +
**Modbus WebUI fixes
 +
**Modbus WiFi/Mobile on/off fix
 +
**SMS Utilities table validation fix
 +
**SMS Utilities UCI API fixes
 +
**SMS Utilities SMS response status fix
 +
**SMS-Utilities WiFi/Mobile on/off fix
 +
**Clarified WebUI options for SMS Forwarding
 +
**Hotspot Statistics tab shows incorrect information fix
 +
**Hotspot session name validation fix
 +
**Hotspot landing page file upload limits increased
 +
**Fixed MAC address clone configuration
 +
**Fixed sessions table dependency on authentication mode
 +
**Events log network type logging on modem service restart fix
 +
**Events Reporting typos that prevented rules being matched fixes
 +
**WAN Failover option disappearing after language change fix
 +
**Removed unnecessary fix_sta_ap.sh from syslog messages
 +
**Removed OpenVPN converting names to hex
 +
**Added file upload limits
 +
**DDNS name validation fix
 +
**Hostname and router name after backup upload fix
 +
**Mobile Data Limit firewall rule init fix
 +
**Added missing password validation
 +
**Fixed default VRRP config to follow RFC 2338
 +
**Changed packages names in Package Manager
 +
**Input/Output label & functionality fixes
 +
**FOTA memory calculation fix
 +
**Removed "Site Survey" page
 +
 
 +
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
 +
 
 +
*New features:
 +
**New flash validation added
 +
 
 +
*Improvements
 +
**Added reply after mobileon and mobileoff SMS Utilities commands
 +
 
 +
*Fixes:
 +
**Firmware upgrade with keep settings fix
 +
**PPTP fix when upgrading firmware with keep settings
 +
**Do not autocomplete non-system passwords fix
 +
**Added validation for 'Service mode' change
 +
**VRRP template fix
 +
**Added validation for user group number format
 +
**SMS Gateway: removed new line add after configuration save
 +
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
 +
**NTP time zone options fix
 +
**MQTT bridge with SSL/TLS connection fix
 +
**'Use DNS servers advertised by peer' does not save fix
 +
**'FW update available' fix
 +
**WAN state and IP print fixes
 +
 
 +
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
 +
 
 +
*Fixes:
 +
**Increased RMS HTTP Proxy resource limit
 +
 
 +
===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
 +
 
 +
*New features:
 +
**SNMP: Individual port status added
 +
**openssl: update to version 1.0.2r
 +
**dropbear: update to version 2019.78
 +
**busybox: update to version 1.30.1
 +
**uci: update to version 2018-08-11
 +
**ubus: update to version 2018-10-06
 +
**ubox: update to version 2019-04-07
 +
**libubox: update to version 2019-02-27
 +
**MQTT: added MQTT support
 +
**WebUI: add additional band support for EC25
 +
**UPnP: UPnP added
 +
**WebUI: add events reporting and reporting configuration support
 +
**Flash: Add XT25F128B flash support
 +
**Strongswan: Custom option added
 +
**WebUI: upload backup from lower firmware version support
 +
 
 +
*Fixes:
 +
**Wireless: Station availability when two or more Access Points are created fix
 +
**Mobile Graphs: Color and line adjustments
 +
**WebUI: Overview->Network->Topology: WAN Failover redirection fix
 +
**Strongswan: Shared-keys fix
 +
**WebUI: fix input validation issues
 +
**Mobile traffic: graph fixes
 +
**WebUI: fix LEDs Indication setting
 +
**QMI2: set 1st context to IPv4
 +
**Hotspot: Restrict internet access fix
 +
**Hotspot: 'Invalid' prompt after deleting session fix
 +
**IPSec: No shared key validation added
 +
**Email-to-SMS: longer SMS fix
 +
**IPSec: Allow WebUI access with HTTPS fix
 +
**RMS: fixed disable on sysupgrade with keep settings
 +
**WebUI: LEDs Indication hint text fix
 +
**IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
 +
**SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
 +
**Wireless: Regulatory domain and channel change fix
 +
**SMS-Management: Error message after successful SMS send fix
 +
**Services: SNMP Trap redirection fix
 +
**Periodic Control: Rule addition in Chromium fix
 +
**Setup Wizard: Dialing number disappearing fix
 +
**WAN: After interface edit, redirect back to main WAN window fix
 +
**SNMP: Teltonika MIB file fix
 +
**rms_mqtt: HTTPs proxy fix
 +
**rms_json: Fixed WAN State and WAN IP
 +
**Wireless: STA connection loss fix
 +
**QoS: Speed limitation fix
 +
**Stunnel: Removed unnecessay WebUI options, added validation.
 +
**Port Scan Prevention: Disable fix
 +
**Port Scan Prevention: Warning message for remote access added
 +
**ledman: fixed led issue when there is no connection
 +
**ledman: fixed led issue when rebooting router with reset button
 +
**Wireless: Channel frequency dispaly fix
 +
**Administration: RMS 'infobox' fix
 +
**Setup Wizard: RMS 'infobox' fix
 +
**Setup Wizard: Validation and redirection fixes
 +
**VRRP: updated to 1.15 version
 +
**LAN: Static leases fix
 +
**Backup: Redirection to 127.0.0.1 after backup load fix
 +
**Network: 'Use WAN as LAN' availability fix
 +
**WebUI: WAN as LAN when using main WAN WIFI fix
 +
**Network: Delete static protocol options after change to DHCP fix
 +
**L2TP and PPTP: updated services
 +
 
 +
===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
 +
 
 +
*New features:
 +
**Added 'More' SMS Utilities rule
 +
 
 +
*Fixes:
 +
**RMS reconnect issue fix
 +
**Hotspot authentication mode change fix
 +
**Overview widget fixes
 +
**Connection uptime widget fix
 +
**SMS Management inbox read fix
 +
**Wireless scan fix
 +
**SSTP service update
 +
**SMS-Utilities: various functionality fixes
 +
**Restore-Point: Removed the ability to load restore points of a different router
 +
**VLAN: LAN Network configuration backup fix
 +
**Maximum length SMS message send fix
 +
**Long SMS messages stretch out WebUI fix
 +
**Ping Reboot: reboots after service is disabled fix
 +
**Removed warning message when scanning for WiFi STA
 +
**Setup Wizard WiFi channel select custom option remove fix
 +
**Call Utilities: double zero in front of the number fix
 +
**Setup Wizard: you cannot procceed with setup if you disable DHCP fix
 +
**Restore to default percentage counting fix
 +
**WoL: Use WAN as LAN fix
 +
**Network Operators: Typo fix
 +
**Events log: Typo fixes
 +
**Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
 +
**Hotspot: configuration saves without advertisement address fix
 +
**WiFi channel frequency display fix
 +
**Mobile Traffic: daily statistics show wrong time fix
 +
**STunnel text display fix
 +
**IPSec text display fix
 +
**OpenVPN remove TLS clients in TAP mode fix
 +
**Hotspot: Tab placement fix
 +
**Overview: Text changes
 +
**SMS-Utilities: 'uci show' fix
 +
**WebUI: added connection band info to mobile status page
 +
**Mobile: fix for LTE band default value for different regions
 +
**RMS: fixed logread messages
 +
**I/O: fixed output state labels
 +
 
 +
===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22====
 +
 
 +
*New features:
 +
**Added Wake on LAN functionality
 +
**Added Wake on LAN SMS Utilities rule
 +
**Added STunnel feature to VPN services
 +
 
 +
*Improvements:
 +
**Added every WAN interface selection to Qos
 +
**Add modem restart option to Periodic Reboot
 +
**Updated curl to version 7.64.0
 +
**Updated OpenSSL to version 1.0.2q
 +
 
 +
*Fixes:
 +
**L2TP network restart after connection loss fix
 +
**OpenVPN service restart when TLS-Password is changed fix
 +
**Mobile IP and gateway fix
 +
**Overview OpenVPN widget display fix
 +
**IPSec psk_key save after older firmware upgrade fix
 +
**Configuration backup and firmware upgrade stuck on the 'downloading' page fix
 +
**SNMP memory leak fix
 +
**Mobile data limit keep limit after firmware upgrade with keep settings fix
 +
**Remote access information fix
 +
**L2TP IP range change fix
 +
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
 +
**Hotspot firewall rules fix
 +
**Data-only SIM fix
 +
**Wireless Station and Access Point fixes
 +
**Deleted unnecessary IPsec keep alive option
 +
**Fixed GRE Tunnel connection
 +
**Removed NOTRACK target from firewall rules
 +
**WAN IP not showing on Login page fix
 +
**DDNS process kill fix
 +
**WAN selected as LAN fix
 +
**IPSec restart when backup mobile fails fix
 +
**RMS memory usage fix
 +
**CLI Connect button fix
 +
**Mobile traffic counter resetting fix
 +
**Multiple OpenVPN related fixes
 +
**Ping Reboot fix
 +
 
 +
===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20====
  
−
* <b>Fix</b>
+
*Fixes:
−
** <b>Network</b>
+
**SSH security fix
−
*** Fixed IPv4, IPv6 mobile connection restarts
+
**Mobile page fix
−
*** Fixed operator scanning when mobile interface is disabled
 
−
*** Fixed data limit and tracking when software flow offloading is enabled
 
−
*** Added network reload call before bringing the mobile interface up
 
−
*** Fixed Port-based VLAN ID calculation issue
 
−
*** Fixed PDP context authentication when using special characters
 
−
** <b>Services</b>
 
−
*** Fixed event text for configurable inputs/outputs on I/O Juggler
 
−
*** Fixed I/O PIN3 value not changing via MODBUS TCP
 
−
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
 
−
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
 
−
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
 
−
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
 
−
*** Fixed OpenVPN keep alive setting migration issue
 
−
*** Fixed PPTP server name setting migration issue
 
−
*** Fixed missing WebUI issue caused by Email Relay installation
 
−
*** Fixed NTP's Operator Station Synchronization memory leak issue
 
−
*** Fixed test email validation
 
−
** <b>System</b>
 
−
*** Fixed libcares vulnerability CVE-2022-4904
 
−
*** Fixed frr vulnerability CVE-2022-37035
 
−
*** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
 
−
*** Removed ability for non root users to edit scripts that get executed as root
 
  
−
===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24===
+
===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
  
−
* <b>Fix</b>
 
−
** <b>Network</b>
 
−
*** Fixed Data Limit issue
 
  
−
===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07===
+
*New features:
 +
**Added NTP server, force servers option for ntpclient
 +
**Added selectable network band support
 +
**Added SSTP
 +
**Replace bird routing package with quagga package
 +
**Added WiFi MAC Filter address range support
 +
**Changed RMS communication protocol to use MQTT instead of OpenVPN
 +
**Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
  
−
* <b>Improvements</b>
+
*Improvements
−
** <b>WebUI</b>
+
**Updated mobile operator database
−
*** Improved data persistence between page refreshes
+
**Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
−
*** Improved page navigation behavior
+
**Sensitive information (usernames and passwords) removed from router's Troubleshoot file
−
*** Improved redirect logic to open configuration edit modals
+
**Added warnings to Call Utilities when on 4G-only mode
−
*** Updated the 'Status -> Mobile' page
 
−
*** Updated interface card in the Overview page
 
−
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
 
−
** <b>Network</b>
 
−
*** Added an info message displayed when a faulty SIM card is inserted
 
−
*** Added ResIOT operator's APNs to the APN database
 
−
*** Improved mobile connection re-establishment after reboot
 
−
*** Improved mobile connection recovery in cases where it was lost unexpectedly
 
−
*** Improved 'Deny data roaming' operation when switching between operators
 
−
*** Changed default WiFi AP cipher to CCMP (AES)
 
−
*** Added the logging of MAC addresses rejected by a WiFi AP
 
−
** <b>Services</b>
 
−
*** Added MQTT support to I/O Juggler
 
−
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
 
−
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
 
−
*** Added argument support for the 'Execute custom script' SMS rule
 
−
*** Added a frequency option 'schedule' Modbus Master
 
−
*** Added pagination to Events Reporting overview
 
−
*** Added limit to Events Reporting rule list
 
−
*** Added email logging for Events reporting
 
−
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
 
−
*** Added a limit of 30 for NTP instances
 
−
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
 
−
*** Added "make before break" option to IPsec configuration
 
−
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
 
−
*** Improved MODBUS Master connection handling to reduce connection count
 
−
*** Updated modbus request error messages
 
−
*** Added OpenVPN server ip block support
 
−
*** Added MQTT support for MODBUS Master alarms
 
−
*** Added the possibility to get the device's Ethernet port data via SNMP
 
−
** <b>System</b>
 
−
*** Updated bash to version 5.1.16
 
−
*** Added detailed FW update failure error message to Events Log
 
−
*** Improved firmware upload/validation error messages
 
−
*** Updated Turkish language support
 
−
*** Added protocol column to IP block page
 
−
*** Added "vpns.log" file to the Troubleshoot package
 
−
*** Added Wireguard tunnel information to the Troubleshoot package
 
−
*** Updated default admin group access rights
 
−
*** Updated DFOTA notification to show "More info" only when the update is forced
 
  
−
* <b>Fix</b>
+
*Fixes:
−
** <b>WebUI</b>
+
**Fixed multiwan restart sequence issues causing VPN instabilities
−
*** Fixed MAC address showing on mobile interfaces
+
**Static Routes fix
−
*** Fixed mobile cell ID displaying in hexadecimal
+
**WiFi updates and security fixes
−
*** Fixed mobile data limit card creation in the Overview page
+
**Minor improvements and bug fixes for operator selection
−
*** Fixed modem widget disappearing from the Overview page
+
**SNMP MIB values and file format fix
−
*** Fixed Services page not displaying data after Thingworx package is installed
+
**SNMP Hotspot and serial values fix
−
** <b>Network</b>
+
**Redirect to login page after factory reset fix
−
*** Fixed interface priority change issue
+
**IPsec init script fix
−
*** Fixed a Custom Firewall Rule editing issue
+
**Overview WiFi widget fix
−
*** Fixed DMZ configuration saving while it is disabled
+
**Modbus WiFi enable/disable fix
−
*** Fixed Port Scan script execution failure
+
**Modbus APN write and memory leak fixes
−
*** Fixed Firewall zone duplication issue
+
**JavaScript code multiplication fix
−
*** Fixed call function when VoLTE is disabled
+
**DHCP server lease time validation update fix
−
*** Fixed VoLTE control when IMS is not enabled
+
**Hang up on watchdog reset fix
−
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
+
**Overview mobile WAN IP display fix
−
*** Fixed APN authentication when using empty credentials
+
**curl: update to 7.62.0
−
*** Fixed manual APN selection from list
+
**OpenSSL: update to 1.0.2p
−
*** Fixed disabled WiFi interface after factory reset
+
**cacert: update to 2018-10-17
−
*** Fixed WiFi interface creation with SAE mixed encryption
+
**arptables segmentation fault fix
−
** <b>Services</b>
+
**quectel-CM: updated to latest version
−
*** Fixed I/O Scheduler overlapping instances issue
+
**GRE Tunnel delete after button press fix
−
*** Fixed Input/Output image pin colors
+
**Update Teltonika contact address in Licenses page
−
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
+
**Disabled passthrough and bridge selection when multiwan is enabled
−
*** Fixed WiFi Hotspot landing page uploaded theme image display
+
**Fixed lua dispatcher error after reboot
−
*** Fixed WiFi Hotspot trial user deletion issue
+
**Fixed multiwan metrics and priorities
−
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
+
**SMS Utilities SMS status WAN IP with multiwan fix
−
*** Fixed WiFi Hotspot password request by SMS
 
−
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
 
−
*** Added limitations on message size and quantity of email messages in Email to SMS
 
−
*** Fixed SMTP HELLO value parsing issue
 
−
*** Fixed SMS message window reset button
 
−
*** Fixed not being able to save empty 'Message text' field in Auto Reply
 
−
*** Fixed multi-part SMS concatenation
 
−
*** Fixed multi-part SMS processing
 
−
*** Fixed SMS error message on 'Mobile Data Reset' action
 
−
*** Fixed Data To Server JSON format %n, %N and %s flag issues
 
−
*** Fixed Events Reporting email data clean
 
−
*** Fixed Events Reporting missing config selections
 
−
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
 
−
*** Fixed IPsec instance deletion after removing DMVPN package
 
−
*** Fixed IPSec migration via Backup file when DMVPN is configured
 
−
*** Fixed IPsec naming issue when the includes an equals sign
 
−
*** Fixed L2TP client to use correct interface on failover events
 
−
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
 
−
*** Fixed MODBUS database size limiting issue
 
−
*** Fixed MODBUS MQTT Gateway client ID input
 
−
*** Fixed MODBUS TCP Slave RSSI value
 
−
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
 
−
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
 
−
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
 
−
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
 
−
*** Fixed OpenVPN TLS client creation issue while LAN is down
 
−
*** Fixed Package Manager displaying non-existent packages
 
−
*** Fixed Package Manager errors showing up after successful installations
 
−
*** Fixed Periodic Reboot entry duplication after a power cycle
 
−
*** Fixed PPTP 'Client to client' option not being applied after save
 
−
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
 
−
*** Fixed WebUI unavailability after unsuccessful package install
 
−
** <b>System</b>
 
−
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
 
−
*** Fixed bash vulnerability CVE-2022-3715
 
−
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
 
−
*** Fixed libxml2 vulnerability CVE-2022-40304
 
−
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
 
−
*** Fixed LED animation during firmware upgrade
 
−
*** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
 
−
*** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
 
−
*** Improved file upload logic
 
−
*** Fixed GPL firmware compilation with selected Tinc package
 
−
*** Fixed OpenVPN Static Key migration via keep settings issue
 
−
*** Fixed NTP time zone name setting migration when the name contains whitespaces
 
−
*** Fixed language setting issue
 
−
*** Fixed integer validation on industrial services
 
−
*** Fixed LED indications when PDP type is IPv6
 
−
*** Fixed issues with PDP type and SMS limit period migration via keep settings
 
  
−
===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
+
===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
  
−
* <b>Fix</b>
+
*Fixes:
−
** <b>Network</b>
+
**VPN shutdown at delete fix
−
*** Changed generic modem restart method
+
**PPTP default gateway set and delete fix
−
*** Fixed mobile page VoLTE switching issues
+
**OpenVPN status fix
−
** <b>Services</b>
+
**OpenVPN configuration section name compatibility fix
−
*** Sanitized tcpdump storage location
+
**IPsec redirect after save fix
−
** <b>System</b>
+
**Overview VRRP widget status fix
−
*** Fixed legacy backup upload
+
**Hotspot start after reboot fix
−
*** Fixed upgrade from legacy FW issue with keep settings
+
**Added default LAN IPv6 address
 +
**Overview WAN wiki link fix
 +
**Hotspot overview fix
 +
**Mobile data counter reset fix
  
−
===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
+
===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
  
−
* <b>Fix</b>
+
*New features:
−
** <b>Network</b>
+
**Added operators control with white/black list feature
−
*** Fixed disabled WiFi interface after factory reset
+
**Added Administration -> Root CA page
  
−
===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===
+
*Improvements:
 +
**Added many security updates
 +
**Added firmware update information
 +
**Added CellID information to Troubleshoot file
  
−
* <b>New</b>
+
*Fixes:
−
** <b>System</b>
+
**GPL: compilation fixes
−
*** Japanese language
+
**Configuration restore fix
 +
**Disabled Hotspot users' ability to reach LAN devices and WebUI
 +
**Port Forwarding IP validation fix
 +
**System -> Administration -> Overview page loading fix when VPN configuration exists
 +
**Some minor DHCP display fixes
 +
**Call Utilities reboot action partial message fix
 +
**DDNS IP source change and added time selection
 +
**OpenVPN service fixes
 +
**Some minor QoS fixes
 +
**Some minor OpenVPN fixes
 +
**Configuration Wizard: LAN page redirect fix
 +
**Overview WAN IP fix
 +
**Added Redirect to HTTPS information
 +
**Troubleshoot TCPdump fix
 +
**Changed 'Backup WAN' to 'WAN Failover'
 +
**WebUI: language translation in some pages fix
 +
**Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
 +
**Overview VPN widget IP fix
  
−
* <b>Improvements</b>
+
===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
−
** <b>Network</b>
 
−
*** Optimized mobile netifd script installation
 
  
−
* <b>Fix</b>
+
*Fixes:
−
** <b>Network</b>
+
**Fixed GPL Readme
−
*** Shortened modem hang monitor timeout
+
**Fixed JavaScript password validation
−
*** Fixed VLAN option setting when changing VLAN ID
 
  
−
===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03===
+
===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
  
−
* <b>Improvements</b>
+
*Fixes:
−
** <b>System</b>
+
**Fixed RMS status in overview page
−
*** Remove front-end certificate validation
+
**Fixed LTE signal strength graph
−
** <b>Network</b>
 
−
*** Optimized mobile netifd script installation
 
  
−
* <b>Fix</b>
+
===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
−
** <b>Network</b>
 
−
*** Fixed modem communication validation
 
−
*** Fixed connection establishment in IPv6 only mode
 
−
** <b>Services</b>
 
−
*** Fixed libxml2 vulnerability CVE-2022-40303
 
−
*** Fixed an IPsec Phase one & two setting migration issue
 
−
*** Fixed OpenVPN migration from legacy firmwares
 
−
*** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
 
−
** <b>System</b>
 
−
*** Fixed JSON key parsing; keys can now be any printable character sequence
 
−
*** Fixed memory leak in 'session' module
 
−
** <b>WebUI</b>
 
−
*** Fixed file pretty name parsing
 
  
−
===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16===
+
*New features:
 +
**Added DHCP Force option
 +
**Added RMS connection page to Setup Wizard
 +
**Added forced password change
  
−
* <b>New</b>
+
*Improvements:
−
** <b>Network</b>
+
**Updated Overview widget icons, added Teltonika Wiki links
−
*** Firewall DMZ page
+
**Added private key decryption function to OpenVPN client configuration
−
** <b>Services</b>
+
**Added additional DPD options
−
*** Java package
 
−
*** SFTP server support
 
−
*** OPC UA client
 
−
*** Hotspot registered users management page
 
−
** <b>System</b>
 
−
*** Portuguese language
 
−
*** Spanish language
 
−
*** Turkish language
 
−
*** Email Relay package
 
−
** <b>WebUI</b>
 
−
*** New Web menu design
 
  
−
* <b>Improvements</b>
+
*Fixes:
−
** <b>Network</b>
+
**Fixed Wget reboot URL datatype
−
*** Updated modem handling, attachment, tracking and connection establishment processes
+
**WebUI: SSH access status fix
−
*** Added the possibility to select multiple ports in all firewall port fields
+
**Added special symbols exception to SMS-Forwarding
−
*** Added 'Match' traffic by type option to firewall traffic rules
+
**Added missing Events Reporting config for SMS-Utilities
−
*** Added DNS servers and routing table fields to the Wireguard page
+
**PPP enable/disable bug fix
−
*** Improved generating network topology
+
**Multiple Call Utilities fixes
−
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
+
**SMS event queries fix
−
*** Update Firewall Traffic Rules page with DSCP and MARK options
+
**Removed unnecessary sim_switch message text
−
*** Added keepalive, holdtime and connect timers to BGP configuration
+
**Some SSH security fixes
−
*** Added 'Use gateway metric' to network protocols web interface
+
**Updated Modbus sources and coding table
−
*** Added more DHCPv6 client events to system log
+
**Multiple OpenVPN bug fixes
−
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
+
**Graphs/Signal strength fix when using HSDPA+HSUPA network type
−
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes
+
**Fixed VLAN DHCP leasing
−
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
+
**Administration password change fix
−
*** Added mobile connection state for IPv6
+
**STA mode logic changed
−
*** Added individual WiFi toggle support
+
**Hotspot bandwith limit fix
−
*** Added error message when DFS channel is selected during scanning
+
**Moved IP alias gateway to advanced features
−
** <b>Services</b>
+
**Administration -> Overview fix
−
*** Added CSP headers to Hotspot Landing Page
+
**Factory reset fix due to mobile connection problems
−
*** Added hotspot user script validation
 
−
*** Improved logging of disconnecting client devices
 
−
*** Implemented Hotspot 'forget' method, which removes user from DB by MAC
 
−
*** Added execute custom script SMS Utilities rule
 
−
*** Added receiver and transceiver mode support to SMPP
 
−
*** Added timezone synchronization with GSM operator option to NTP Client
 
−
*** Updated Zerotier web interface
 
−
*** Added IPsec Flush connection option on tunnel initialization
 
−
*** Added MODBUS slave regfile validation
 
−
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
 
−
*** Added DMVPN Phase 2 and Phase 3 support
 
−
*** Added synchronization counting to NTP client
 
−
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
 
−
*** Added 'Unregister' button to RMS page
 
−
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
 
−
*** Updated Zerotier package to version 1.10.1
 
−
*** Added automatic package removal upon failed installation in Package Manager
 
−
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
 
−
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
 
−
*** Updated sqm-scripts to version 1.5.1
 
−
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
 
−
*** Added monthly reboot option to periodic reboot function
 
−
*** Added support for multiple custom option selection to SSTP configuration
 
−
*** Added PKCS12 certificate chain support to OpenVPN
 
−
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
 
−
*** Added QoS selection to MQTT Modbus Gateway
 
−
*** Improved RAM usage during upload and installation of packages via Package Manager
 
−
*** Updated curl to version 7.86.0
 
−
*** Added brute-force prevention measures to Post/Get
 
−
*** Added automatic private and public key generation to Wireguard VPN
 
−
*** Added multiple Remote source IP support to IPsec
 
−
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
 
−
*** Added functionality to rotate log file when log is saved to Flash memory
 
−
*** Improved performance while fetching packages on repeat visits to the Package Manager page
 
−
** <b>System</b>
 
−
*** Added a 'test mail' button to the Administration -> Recipients page
 
−
*** Added option to clear blocked IPs in the Access Control page after reboot
 
−
*** Updated Web Request-Response core logic
 
−
*** Added certificate validation to all services that support certificate upload
 
−
*** Updated URL protocol validations
 
−
*** Removed profile update requests during Save & apply
 
−
*** Optimized profile switching logic
 
−
** <b>WebUI</b>
 
−
*** Added an indication to the Interfaces page that displays when data limit is enabled
 
−
*** Added bootloader version to the Device section in the System page
 
−
*** Added configuration page shortcuts to Overview page widgets
 
−
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
 
−
*** Updated network interfaces protocols web interface
 
−
*** Updated 404 page to include navigation menu
 
  
−
* <b>Fix</b>
+
===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
−
** <b>Network</b>
 
−
*** Fixed jumbo frames MTU issue
 
−
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
 
−
*** Fixed NHRP web interface issues
 
−
*** Fixed WAN interface configuration interfering with LAN
 
−
*** Fixed mdcollect memory leak issue
 
−
*** Fixed data limit not resetting properly
 
−
*** Fixed incorrect mobile data usage calculations for multiple day periods
 
−
*** Fixed an Auto APN 'Keep settings' issue
 
−
*** Fixed data counting after mobile data limit has been reached
 
−
*** Fixed mobile band not setting correctly on first try
 
−
*** Fixed incorrect data limit conditions causing unwanted SIM switches
 
−
*** Fixed Passthrough DHCP lease time setting
 
−
*** Fixed mobile bridge mode issue when no DNS servers are supplied
 
−
*** Added new Operator Lists instance name validations
 
−
*** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
 
−
*** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
 
−
*** Added wget tracking method to WAN Failover
 
−
*** Added interface checks to remove inaccurate Failover events from the Event Log
 
−
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
 
−
*** Fixed Failover fallback issue
 
−
** <b>Services</b>
 
−
*** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
 
−
*** Fixed relay state switching
 
−
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
 
−
*** Added I/O restart on configuration profile change
 
−
*** Fixed I/O voltage range display for power socket pins
 
−
*** Fixed SMNP OID for I/O state
 
−
*** Fixed I/O Juggler SMS text message Save & Apply issue
 
−
*** Fixed Hotspot connected user list maximum upload/download value limits
 
−
*** Fixed incorrect connected Hotspot user information in RMS JSON
 
−
*** Removed unnecessary field from the Port Mirroring page
 
−
*** Fixed Hotspot issues related to specific connected phones
 
−
*** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
 
−
*** Fixed WiFi Scanner hostname validation issues
 
−
*** Fixed UCI SMS Rule return message to display new changes
 
−
*** Fixed DNP3 issues when asking for modem temperature
 
−
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
 
−
*** Fixed SMS sending issues when using multiple APN
 
−
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
 
−
*** Fixed unblocking IP addresses with an SMS message
 
−
*** Fixed Mobile Utilities page not load properly on some occasions
 
−
*** Fixed dbus vulnerability CVE-2020-35512
 
−
*** Fixed dnsmasq vulnerability CVE-2022-0934
 
−
*** Fixed ext4 vulnerability CVE-2021-3428
 
−
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
 
−
*** Fixed libxm12 vulnerability CVE-2022-29824
 
−
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
 
−
*** Fixed MQTT DoS vulnerability CVE-2021-41039
 
−
*** Fixed privoxy vulnerability CVE-2021-44542
 
−
*** Fixed python3 vulnerability CVE-2022-42919
 
−
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
 
−
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
 
−
*** Fixed switching between RMS connection types while the device is unregistered
 
−
*** Fixed reload issues in website blocking feature
 
−
*** Fixed IPsec PSK secret required field validation
 
−
*** Fixed bandwidth limiting after QoS is enabled for the first time
 
−
*** Fixed Dropbear issues when logging in over IPv6
 
−
*** Fixed Modbus status in Status -> Services page
 
−
*** Fixed Azure IoT Hub application issues when sending large volumes of data
 
−
*** Fixed Azure IoT Hub MQTT password validation
 
−
*** Fixed DMVPN configuration migration issue
 
−
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
 
−
*** Fixed DMVPN IPsec connection issue
 
−
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
 
−
*** Fixed Dynamic DNS long hostname text display issue
 
−
*** Fixed Events Reporting memory leak issue
 
−
*** Fixed Events Reporting not triggering after flipping an I/O slider
 
−
*** Fixed FOTA cron job not starting after factory reset
 
−
*** Fixed IPsec local firewall option parsing
 
−
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
 
−
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
 
−
*** Fixed NTP pool hostname validation
 
−
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
 
−
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
 
−
*** Fixed OpenVPN custom dev name transformation to correct format
 
−
*** Fixed OpenVPN device name setting logic when uploading config from file
 
−
*** Fixed OpenVPN instance status display
 
−
*** Fixed OpenVPN TAP (bridged) configuration detection
 
−
*** Fixed Qos configuration saving issue occurring after instance deletion
 
−
*** Fixed RMS JSON incorrect WAN state and IP information
 
−
*** Fixed RMS step access issue in the Setup Wizard page
 
−
*** Fixed SNMP issues after reboot while using a Hotspot
 
−
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
 
−
*** Fixed SNMP traps not working after SNMP is installed from server
 
−
*** Fixed SSTP client route creation issue
 
−
*** Fixed UPNP secure mode not turning off issue
 
−
*** Fixed Wireguard route to endpoint issue
 
−
*** Fixed manual package installation for queued packages
 
−
*** Fixed NAT Rules dependency from IPsec web instance
 
−
*** Returned usleep utility
 
−
*** Updated Australian and South African NordVPN server IP addresses
 
−
** <b>System</b>
 
−
*** Fixed certificate signing issues
 
−
*** Fixed Telnet, CLI access blocking after max invalid tries
 
−
*** Fixed FW upgrade with 'Keep settings' while low free space is available
 
−
*** Fixed backup file duplication issue
 
−
*** Fixed network device handling in system
 
−
** <b>WebUI</b>
 
−
*** Fixed Hotspot interface display
 
−
*** Fixed side widget accessibility during first login
 
−
*** Fixed file upload issues
 
−
*** Fixed drag and drop issue in the Traffic Rules page
 
−
*** Fixed protocol display in the overview of the Interfaces page
 
−
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
 
−
*** Fixed login errors after browser tab restoration
 
−
*** Fixed redirect to newly set IP address after Interface configuration
 
−
*** Fixed firmware upgrade verify spinner not closing
 
−
*** Fixed an issue with file upload via drag and drop
 
  
−
===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12===
+
*Improvements:
 +
**Added hostname validation for Wget Reboot
 +
**New versioning logic
  
−
* <b>Improvements:</b>
+
*Fixes:
−
** Improved manual-auto connection mode
+
**Output ON/OFF fix
 +
**Firmware Upgrade fix
 +
**SSH authentication logging fix
  
−
* <b>Fixes</b>
+
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
−
** Fixed AT command for SMS storage usage
 
−
** Fixed CVE-2022-1012 memory leak vulnerability
 
−
** Fixed CVE-2022-37434 kernel vulnerability
 
−
** Fixed interface option reset after VLAN ID change
 
−
** Removed memory leak on port events
 
−
** Fixed WiFi Scanner out of range crash when iterating collected data
 
  
−
===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24===
+
*New features:
 +
**Added Redirect LAN to GRE function
  
−
* <b>Improvements:</b>
+
*Fixes:
−
** Added 'home.vodafone.de' APN
+
**Mobile Data Limit fixes
−
** Improved stability of device information storage
+
**User's password removed from users table
 +
**Firmware upgrade message fixed
  
−
* <b>Fixes:</b>
+
===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
−
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
 
−
** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240|
 
−
** Fixed VoLTE management|}}
 
−
** Fixed OpenVPN tls-auth and tls-crypt option names
 
  
−
===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12===
+
*Fixes:
 +
**Minor Openvpn functionality fixes
  
−
* Improvements:
+
===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
−
** Updated curl to version 7.83.1
+
 
−
** Updated firmware validation error messages
+
*New features:
−
** Added multiple source IP address support to the Port Forwards page
+
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
−
** Increased custom APN Username & Password field maximum length to 64 symbols
+
 
−
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
+
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
−
** Improved mobile connection status handling
+
 
−
** Added CSP headers Hotspot WebUI landing page
+
*Fixes:
 +
**Updated SMS send satus
 +
**Added Modbus enable check-box
 +
**Added firewall rule so the router would be reachable from WAN when access control is enabled
 +
 
 +
===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
 +
 
 +
*Improvements:
 +
**Added download MIBS button to SNMP page
 +
 
 +
*Fixes:
 +
**Fixed style for VPN service pages, Modbus page
 +
 
 +
===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
 +
 
 +
*New features:
 +
**Added Relayd function that can make the router act like a wireless range extender
 +
 
 +
===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
 +
 
 +
*Fixes:
 +
**Fixed Wi-Fi logging to FTP function
 +
**Fixed site blocking file parsing
 +
**System Information texts fix
 +
 
 +
===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
 +
 
 +
*New features:
 +
**IPsec: added Transport mode, Firewall options, local IP management options
 +
 
 +
*Improvements:
 +
**Moved Disable NAT flags from VPN to Firewall page
 +
 
 +
*Fixes:
 +
**Fixed Firewall config for hotspot interface assignment
 +
**DMZ rule position fix
 +
 
 +
===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
  
−
* Fixes:
+
*Improvements:
−
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
+
**Added binero.se to DDNS service providers list
−
** Fixed CVE-2022-30065 busybox vulnerability
+
**Added some additional SMS Utilities hints
−
** Fixed file upload path traversal
+
**Added support for changing Wireless SSID name from branding script
−
** Removed Data to Server limit to proccess less than 10 instances
+
**Improved Email to SMS function
−
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
 
−
** Fixed OpenVPN dev setting logic
 
−
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
 
−
** Fixed MAC and leasetime setting for Bridge & Passthrough modes
 
−
** Fixed modal tabs navigation when editing wireless interface with non-english languages
 
  
−
===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20===
+
*Fixes:
 +
**WAN port status display fix
 +
**Fixed SMS Utilities Write to config bug when sending mobileoff message
 +
**Whitelist blocking fix in Site Blocking
  
−
* Improvements:
+
===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
−
** Added default password change warning message before firmware downgrade
 
−
** Extended time period for device to make connection to operator
 
−
** Reduced the number of modem reboots when changing mobile settings
 
−
** Reduced excessive log output when no SIM card is inserted
 
−
** Added modem restart prevention on modem init
 
−
** Added disable RPLMN option in the SIM section of the SIM card config
 
  
−
* Fixes:
+
*New features:
−
** Fixed CVE-2022-2068 vulnerability
+
**Added WPA-Enterprise encryption type support for Wi-Fi Access Points
−
** Disabled autoconnect on stop-network call
+
**Added Email To SMS, SMS Forwarding functions
−
** Fixed Hotspot login via landing page issue
+
**Added Wget Reboot function
  
−
===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27===
+
*Improvements:
 +
**Updated fw upgrade validation for future firmwares
  
−
* Improvements:
+
*Fixes:
−
** Added ping to DNS IPv6 support
+
**Fixed bug of not being able to use hostnames as a destination for Ping Reboot
−
** Added modem reset to default state after device FW upgrade
+
**Input/Output Scheduler backup bug fix
−
** Modem init now checks NVRAM sensitive commands before setting
+
**System->Administration page style fixes
−
** GSM output was made consistent
+
**Removed wifid due to security issues
−
** Updated FSTools package to version 2022-05-03
+
**Configuration Backup bug fixes
−
** Added security headers to web requests
 
  
−
* Fixes:
+
===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
−
** Fixed CVE-2019-12900 libbz2 vulnerability
 
−
** Fixed behavior of some gsmctl commands
 
−
** Fixed CVE-2022-23303 hostapd vulnerability
 
−
** Fixed CVE-2022-29581 Linux kernel vulnerability
 
−
** Fixed CVE-2022-29458 ncurses vulnerability
 
−
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
 
−
** Fixed band locking issue
 
−
** Fixed race condition for wireless configuration initialization
 
−
** Fixed operator control issue
 
  
−
===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06===
+
*New features:
 +
**Added IPsec option for WebUI access through tunnel
 +
**Added Reset button custom hold time configuration
  
−
* Improvements:
+
*Fixes:
−
** Improved GSM related messages in Troubleshoot logs
+
**Minor Mobile Data Limit bug fix
 +
**Renamed mibs file to TLT-MIB.txt
 +
**Temperature display fix
 +
**Added Async Control Character Maps
 +
**Fixed minor grammatical errors in the WebUI
 +
**OpenVPN hints fix
  
−
* Fixes:
+
===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
−
** Fixed IGMP Proxy menu item not appearing after package installation
 
−
** Fixed default mobile network configuration generation
 
−
** Fixed MODBUS write requests and Mobile Utils option setting
 
  
−
===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23===
+
*Fixes:
 +
**Some minor PPTP Server and Client functionality fixes
 +
**Added fix to PPP Connection Type due to disconnecting mobile connection
 +
**Real traffic fix
  
−
* <b>New features</b>
+
===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
−
** Overview side widget
 
−
** IGMP Proxy
 
−
** Privileged Access Management (PAM)
 
−
** AWS Greengrass support
 
−
** HTTPS certificate and key upload feature
 
−
** SSH public keys edit box
 
−
** License page
 
−
** DNP3 data for Data to Server
 
  
−
* <b>Improvements</b>
+
*New features:
−
** Updated busybox to version: 1.34.1
+
**Added Hotspot configuration profiles
−
** Updated curl to version 7.79.1
 
−
** Added iptables filter package for string filtering
 
−
** Added CHAP authentication for L2TP VPN
 
−
** Added IPv6 support for L2TPv3 VPN
 
−
** Added EAP-MSCHAPV2 authentication method for IPsec VPN
 
−
** Added IPv6 support to Auto Reboot
 
−
** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
 
−
** Updated SNMP version 5.9.1
 
−
** Added OpenSSL authentication options to SNMPv3
 
−
** Added support for OSPF redistribution options and OSPF neighbors
 
−
** Added password field to BGP Peers page
 
−
** Extended BGP "AS" field validation to accept integers up to 4294967295
 
−
** Added "DHE+RSA" to OpenVPN cipher selections
 
−
** Increased OpenVPN max password length from 128 bytes to 512 bytes
 
−
** Made HMAC key direction initial value dependent on the role of the instance (client or server)
 
−
** Made HMAC key and HMAC authentication key upload fields required
 
−
** Added DES to IPsec encryption algorithms selections
 
−
** Added special character support for CHAP secrets
 
−
** Added validation requirements for PPTP user list username field
 
−
** Added option to manually enter Public key in Wireguard configuration
 
−
** Made generating Wireguard  keys possible only while in auto mode
 
−
** Added Events Log database to troubleshoot archive
 
−
** Added RFC1918 filter field
 
−
** Added the possibility to unblock multiple blocked devices at once
 
−
** Added 'Port' column to blocked login attempts table
 
−
** Added Speedtest server refresh
 
−
** Updated Speedtest server list
 
−
** Added asterisk option to Site Blocking
 
−
** Added MD5 and SHA256 checksums to package validation page
 
−
** Changed certificate requirements to only require client key file if client certificate is used
 
−
** Added pagination and data retention between table pages
 
−
** Added pagination functionality to tables when there are more than 10 records
 
−
** Improved table sorting by saving user provided sort settings in the browser
 
−
** Improved drag and drop functionality
 
−
** Added the possibility to drag and drop files onto upload components
 
−
** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
 
−
** Added 'Strict-Transport-Security' response header for HTTPS
 
−
** Added 'breadcrumbs' to modal windows
 
−
** Improved initial WebUI loading after login
 
−
** Added mobile bytes sent and bytes received SNMP OIDs
 
−
** Added mobile LED turn off feature ('System -> Administration'  page)
 
−
** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
 
−
** Updated mobile usage data point calculation logic
 
−
** Added the possibility to manually enter operator number
 
−
** Improved obtain mobile cell ID process
 
−
** Added modem restart if SIM card is removed during APN database fetching process
 
−
** Added unauthorized call logging
 
−
** Added space character support in SMS commands
 
−
** Disabled SMS modem storage configuration form when SIM is not inserted
 
−
** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
 
−
** Added external modem SMS limit Overview card and widget
 
−
** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
 
−
** Added duplicate value check for list configuration options
 
−
** Changed mobile card instance design
 
−
** Fixed 'Mobile Data usage reset' SMS rule
 
−
** Fixed the default state parameter of SMS list POST/GET command
 
−
** Added Hotspot configuration profiles
 
−
** Added local Hotspot user password hashing
 
−
** Added Hotspot password encoding option
 
−
** Improved Hotspot related firewall rule setting
 
−
** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
 
−
** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
 
−
** Added ubus support to Hotspot
 
−
** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
 
−
** Added I/O SNMP trap
 
−
** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
 
−
** Added device name parameter '%pc' to I/O Juggler
 
−
** Added PPPoE VLAN priority support
 
−
** Made VRRP ping section dependent on main instance
 
−
** Added 'WAN to LAN' switch
 
  
−
* <b>Fixes</b>
+
*Improvements:
−
** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
+
**Added custom redirect address
−
** Fixed CVE-2022-28391 busybox vulnerability
+
**Added troubleshoot file download protection
−
** Fixed CVE-2018-16789 shellinabox vulnerability
 
−
** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
 
−
** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
 
−
** Fixed zlib backport security issue
 
−
** Fixed Wireguard firewall zone assignment
 
−
** Fixed queued packages disappearing from list after FW upgrade with keep settings
 
−
** Fixed error message display for multiple input validation rules
 
−
** Fixed incorrect DHCP validation range for start and limit fields
 
−
** Removed 'Bring up on boot' option from network interface configuration pages
 
−
** Fixed coma-separated DHCP options disappearing after save
 
−
** Fixed exclude and listen interfaces
 
−
** Fixed 'Use broadcast flag' option saving
 
−
** Fixed firewall zone assignment when creating new interfaces
 
−
** Fixed OpenVPN 'Netmask' and 'IP address' field validations
 
−
** Fixed OpenVPN TAP configuration saving issue
 
−
** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
 
−
** Fixed dynamic BGP route state display
 
−
** Fixed BGP peer enable in edit page
 
−
** Fixed issue when no L2TP client instance could be bound to IPsec
 
−
** Fixed firewall rule and zone behavior related to config section creation
 
−
** Added default value for L2TPv3 netmask, which is now written to config after save
 
−
** Fixed passthrough option saving to IPsec file
 
−
** Fixed DMVPN issue where instance configuration could not be saved
 
−
** Fixed Wireguard peer could not be saved issue
 
−
** Fixed NTP client time synchronization after factory reset
 
−
** Fixed device time display with selected time zone
 
−
** Fixed MODBUS TCP indexation missing bracket issue
 
−
** Fixed initial MODBUS TCP request count validation
 
−
** Fixed PIN 3/4 direction switching over MODBUS TCP
 
−
** Fixed MODBUS data to MQTT socket closing issue when connection fails
 
−
** Fixed MODBUS alarm configuration deletion
 
−
** Fixed DNP3 master not working after FW upgrade with 'keep settings'
 
−
** Fixed DNP outstation not returning error messages
 
−
** Added missing SNMP objects: mobile IP, data sent/received today
 
−
** Fixed MQTT Publisher 'Remote address' field validation
 
−
** Fixed long interface name support for Azure IoT Hub
 
−
** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
 
−
** Fixed missing sent/received data issue
 
−
** Fixed URL input field length validation
 
−
** Fixed admin login issue after upload of backup from a device with older firmware versions
 
−
** Fixed MAC address formatting in Events reporting messages
 
−
** Fixed Events reporting DHCP lease message spam, when no new lease is added
 
−
** Fixed logging crashing after downloading Troubleshoot file
 
−
** Made Wake on LAN visible only on devices with Ethernet ports
 
−
** Fixed Traffic log file transfer to FTP server
 
−
** Fixed Web Filter service reloading after a host list file is uploaded
 
−
** Fixed access denied messages when sending JSON-RPC requests from root user
 
−
** Fixed error message display about duplicated intervals in Profile scheduler
 
−
** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
 
−
** Corrected OSPF Routing card values, value positions and names
 
−
** Fixed global secret instances not being removed when there are no IPsec instances
 
−
** Fixed uploaded file remove icon not staying in position on hover
 
−
** Fixed Overview card collapse issue that made it unresponsive after too many clicks
 
−
** Removed WAN6 interface from the Overview page
 
−
** Fixed mobile IPv6 display in Events Reporting status messages
 
−
** Fixed Bridge mode when DNS2 is not available
 
−
** Fixed PAP/CHAP username and password fields not saving in interface edit window
 
−
** Fixed sending email without secure connection for providers that support such an option
 
−
** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
 
−
** Fixed Call Utilities Events Log message for reboot rule
 
−
** Fixed SMS command validation for no-authorization option
 
−
** Fixed MODBUS SMS alarms 'Enable' option saving
 
−
** Fixed running RMS with no SIM card inserted issue
 
−
** Fixed firmware available on server version checking issue
 
−
** Fixed CVE-2020-15078 openvpn vulnerability
 
−
** Fixed storage calculation for packages
 
−
** SMS Utilities: enhanced service security
 
−
** Fixed firmware deletion after leaving the page
 
−
** Fixed setup wizard redirect after LAN IP change
 
−
** Fixed various validation bugs, typos, option hints & alignments
 
−
** Fixed multiple IPv6 configuration field validations
 
−
** Fixed PDP logging for Verizon operator
 
−
** Added multiwan support for Wireguard default route
 
−
** Fixed wireless signal strength display when no clients are connected
 
−
** Fixed loss of connectivity for clients when router is in STA+AP mode
 
−
** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
 
−
** Fixed Wifi Scanner data not being stored in certain scenarios
 
−
** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
 
−
** Fixed Hotspot user group limit not resetting on specified time
 
−
** Removed an RMS error message when no Hotspot users were created
 
−
** Fixed Hotspot landing page image upload issue
 
−
** Fixed relay output value display in I/O Juggler condition page
 
−
** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
 
−
** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
 
−
** Fixed I/O Juggler's incorrect I/O status messages
 
−
** Fixed APN migration if APN was selected from APN list on legacy firmware
 
−
** Fixed RIP configuration migration from legacy firmware versions
 
−
** Fixed Wireguard interface status setting migration from legacy firmware versions
 
−
** Fixed default config options for SSH and Web access SMS Utilities rules
 
  
−
===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25===
+
*Fixes:
 +
**Some minor Hotspot functionality fixes
 +
**Mobile data logging fix
 +
**Some minor Dynamic DNS functionality fixes
  
−
* <b>Improvements</b>
+
===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
−
** Increased Port Forwards rule max name length
 
−
** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
 
  
−
* <b>Fixes</b>
+
*Improvements:
−
** Added missing bracket to the end of MODBUS messages
+
**SMS Utilities fw_upgrade rule now works with Keep Settings
−
** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
 
−
** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
 
−
** Fixed firewall extra option validation
 
−
** Fixed Hotspot enable button validation
 
−
** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
 
−
** Changed the logic of uploading files to the modem
 
−
** Fixed second mobile interface creation issue
 
−
** Fixed usage of custom headers in I/O Juggler HTTP action
 
−
** Fixed 'verify' option parsing for I/O Juggler
 
−
** Fixed OpenVPN server configuration with password authentication
 
−
** Fixed NTP interval length validation
 
−
** Fixed network interface enable after Drag & Drop
 
−
** Updated NTP client interval to 24h
 
−
** Fixed connection to whitelist carriers
 
−
** Fixed Passthrough mode when DHCP is disabled
 
−
** Fixed 'Deny data roaming' feature
 
−
** Fixed mobile blocking dependency on region
 
−
** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
 
  
−
===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04===
+
*Fixes:
 +
**Minor Reregister function fix
 +
**Use IPv4 only fix
 +
**Minor mobile interface fix
 +
**Some minor Site Blocking fixes
 +
**Connect to hidden WiFi AP fix
 +
**Multiwan metric change fix for RUT230
  
−
* <b>New features</b>
+
===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
−
** DFOTA modem upgrade system for Quectel modems
 
  
−
* <b>Improvements</b>
+
*Improvements:
−
** Removed L2TP section title prefixes
+
**Improved Mobile Data Limit functionality
−
{{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}}
+
**Improved Load Balancing functionality
−
* <b>Fixes</b>
+
<!--
−
** Fixed IPSec crashing issue using mobile
 
−
** Fixed FW flashing when chip is in unknown state
 
−
** Fixed CPU usage percentage display in the Overview page
 
−
** Fixed FOTA timeout issue when server does not respond
 
−
** Fixed installation of backup packages
 
−
** Fixed mobile data limit display after profile change
 
−
** Fixed Bridge mode without multi-APN
 
−
** Fixed multi mobile interface checking
 
−
** Fixed error handling when the modem is not responding
 
−
** Prolonged autoconnect setting timeout
 
  
−
==='''RUT2_R_00.07.01''' | 2021.11.18===
+
===Bootloader Change Log===
−
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
 
 
----
 
----
−
* <b>New features</b>
+
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
−
** RUTOS WebUI
+
 
 +
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
 +
 
 +
*Improvements:
 +
**Updated links to teltonika-networks.com
 +
 
 +
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
 +
 
 +
*New features:
 +
**Added all LED indication on device power on.
 +
 
 +
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
 +
 
 +
*Improvements:
 +
**Improvements made to the boot up process
 +
 
 +
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
 +
 
 +
*New features:
 +
**Added GigaDevice flash support
 +
 
 +
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
 +
 
 +
*Improvements:
 +
**Increased CPU clock speed to 400MHz
 +
 
 +
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
 +
 
 +
*New features:
 +
**Released U-boot
 +
-->

Revision as of 14:44, 11 October 2021

RUT2XX_R_00.01.14.4 | 2021.10.11

  • New features:
    • Added MeigLink SLM750-VAU support
    • Added ping to DNS feature for mobile
  • Fixes:
    • Patched CVE-2021-33909 vulnerability
    • Patched CVE-2019-14834 vulnerability
    • Patched CVE-2021-37600 vulnerability
    • Fixed VoLTE configuration for EC25-V modules
    • Fixed seting band issues
    • Fixed RMS rscp, ecio, rsrp, sinr and rsrq values

RUT2XX_R_00.01.14.3 | 2021.08.17

  • New features:
    • Added MeigLink SLM750-VSA and SLM750-VJ support
    • Added MeigLink SLM750-VJ manual frequency band selection
    • Added MQTT Modbus Gateway keep alive option
  • Improvements:
    • Added conntrack flush after IPsec connection
  • Fixes:
    • Fixed hardware information config corruption when applying backup
    • Fixed backup archive validation
    • Fixed redirecting to correct IP address after firmware upgrade with keep settings
    • Fixed Modbus Master Alarms enabling

RUT2XX_R_00.01.14.1 | 2021.07.02

  • New features:
    • MeigLink SLM750 Australian module support
  • Improvements:
    • Added CallFailed error handling
    • Updated APN database with OTA BELL ME operator APN
    • Added Client ID option to Data to Server
    • Added band selection support for Meiglink SLM750
    • Added band parsing to mobile library
    • OpenSSL updated to version 1.1.1k
  • Fixes:
    • Fixed signal strength LED handling for Meiglink modems
    • Fixed backup generating without packages
    • Fixed service mode handling for Meiglink SLM750 modems
    • Fixed band handling when switching service modes
    • Fixed SMS storage swap to modem when connection type changed from QMI to PPP
    • Fixed IPsec Passthrough function handling
    • Fixed Package Manager package install crash on reboot
    • Fixed modem FW version show for Meiglink SLM750
    • Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
    • Fixed DDNS hostname, username and password fields not showing when custom service is chosen
    • Fixed IPSec Pre-shared key option validation
    • Added security Wireless fixes for the FragAttacks vulnerabilities

RUT2XX_R_00.01.14 | 2021.03.23

  • New features:
    • PPPoE wired WAN
    • WiFi Multiple AP configuration page
  • Improvements:
    • Added SHA1 HMAC hash support to dropbear (SSH server/client)
    • Updated libpcap to version 19.1
    • Updated sqlite3 to version 3.33
    • Updated curl to version 7.74
    • Updated ncurses to version 6.2
    • Updated pcre to version 8.44
    • Updated iptables to version 1.6.2
    • Added hard request, alarm and slave limits to MODBUS TCP Master
    • Added USB ZLP flag to avoid mobile network loss
    • Added new gsmctl command that returns operator names
    • Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
  • Fixes:
    • Fixed CVE-2019-9755
    • Fixed CVE-2018-16789
    • Fixed CVE-2020-12762
    • Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
    • Fixed revision buffer size for Operator Control
    • Fixed operator selection logic
    • Fixed default PPTP route option handling
    • Fixed display of DDNS Hostname, Username and Password options when custom service is selected
    • Fixed incorrect VLAN ID range
    • Fixed IPsec start after reboot issue
    • Fixed IPsec cache issues
    • Fixed firewall rule execution when QoS is not enabled
    • Fixed ZeroTier crashing issues
    • Fixed Events Log Reporting sending email with attached file
    • Fixed unexpected Package Manager crash while installing unsupported packages
    • Fixed static mobile routes after modem restart
    • Fixed routing issue with mobile PPP connection type
    • Fixed double entries after firmware upgrade with keep settings on Output Scheduler
    • Fixed Hotspot freeze on launch with certain config bug
    • Fixed wireless device frequency and channel display in wireless widget
    • Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration

RUT2XX_R_00.01.13.3 | 2021.01.26

  • Fixes:
    • Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
    • Fixed SSH reachable over SIM IP in early boot

RUT2XX_R_00.01.13.2 | 2021.01.12

  • Fixes:
    • Added openvpn patch to fix CVE-2020-11810
    • Updated openssl to version 1.1.1i
    • Added dnsmasq patch for CVE-2019-14834
    • Added strongswan patch to fix CVE-2018-10811
    • Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
    • Updated uci to version 2019-09-01
    • Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
    • Fixed factory reset on button that wouldn't perform a complete settings wipe

RUT2XX_R_00.01.13.1 | 2020.11.19

  • Fixes:
    • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT2XX_R_00.01.13 | 2020.10.23

  • New features:
    • IPsec Xauth
    • IPsec Passthrough
  • Improvements:
    • Added Input/Output default chain policy selections for firewall zones
    • Removed IPv6 related options from Setup Wizard
    • Improved WebUI page loading speed
    • Added a possibility to set MQTT credentials for Modbus Data Sender
    • Added options to keep connection open for Modbus TCP Slave
    • Added TLS certificate options to HTTP(S) data sending for Modbus data
    • Added the option to send SMS messages to multiple numbers on Modbus Alarms
    • Added IPsec aggressive host enable option
    • Expanded IPSec identifier validation
    • Added WiFi SSID field validation
    • Changed IP leasing sequence in mobile Passthrough mode
    • Added SHA512 support
    • Added MD5 & SHA256 checksum calculation for Configuration Backup files
    • Added uploaded package signature verification to Package Manager
    • Added new program that sends and reads GRE Tunnel 'keep alive' packets
    • Changed default WAN Failover values
    • Simplified key combination for opening a new CLI tab
  • Fixes:
    • Fixed Modbus MQTT Gateway not responding when connection with broker restarts
    • Fixed Modbus MQTT Gateway not responding when topics gave special characters
    • Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
    • Fixed configuration field validations in the Modbus MQTT gateway page
    • Fixed MQTT topic validation in Modbus pages
    • Fixed configuration field validations in the ThingWorx page
    • Fixed Periodic Output Control table layout
    • Fixed security related issues to file uploading and HTTP headers
    • Fixed adding new L2TP and PPTP instances on non-English WebUI
    • Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
    • Fixed WiFi SSID string handling in fix_sta_ap.sh
    • Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
    • Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
    • Fixed table design in the System → Administration → Access Control → Safety page
    • Fixed not setting iptables rules for mobile interface
    • Fixed saving APN after firmware upgrade
    • Fixed default mobile MTU setting
    • Fixed access to LAN page when mobile Bridge mode is enabled
    • SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
    • Removed IPv6 Subprefix Hint field from the Network → LAN page
    • Fixed DNS push from OpenVPN server
    • Fixed L2TP over IPsec with Android 10
    • Removed crt_rms deprecated service
    • Fixed RMS collecting data usage
    • Fixed mobile status error for Load Balancing
    • Fixed WAN MAC address value in SMS Utilities command response
    • Fixed answer delay for Call Utilities commands
    • Fixed key combination not working
    • Removed Wireguard from the Network → Status page when this package is not installed
    • Changed SNMP RX, TX object types to uint64

RUT2XX_R_00.01.12.3 | 2020.06.15

  • Improvements:
    • Improved RMS connection establishment

RUT2XX_R_00.01.12.2 | 2020.05.08

  • Fixes:
    • Fixed Verizon operator APN configuration

RUT2XX_R_00.01.12.1 | 2020.04.09

  • Fixes:
    • Fixed AT&T operator APN

RUT2XX_R_00.01.12 | 2020.03.24

  • New features:
    • Added sms remote configuration option
    • Added "Enable HTTPS" option in "Access Control" page
    • Added network frequency band select support for EG25-G modem
    • Added additional service mode options to setup wizard
    • Added Japanese language support
    • Added TLS support to MQTT publisher
    • Added mqtt subscriber support
    • MQTT-Modbus gateway: add MQTT-Modbus gateway support
    • Added ability to install packages stored in backup file
    • Full Unicode SMS support
    • Added time sync from operator station
    • Added ntpclient failover to operator station sync
  • Improvements:
    • Removed wep encryption from WiFi settings
    • Added profile scheduler and default configuration profile
  • Fixes:
    • Fixed TR-069 wan type value
    • removed GRE tunnel option in Events reporting
    • Removed config update from server option
    • Fixed to display the same units of download and upload speeds in the Hotspot settings.
    • Fixed not showing Hotspot users upload/download statistics
    • Added ability to write hyphens to static lease hostname.
    • Fixed RAM usage display
    • Fixed password change URL after firstboot
    • Removed change password error message after firstboot
    • Fixed Web access Control via SMS Utilities
    • Fxed signal strength logging and reporting

RUT2XX_R_00.01.11.3 | 2019.12.04

  • Fixes:
    • Fixed RMS not displaying data when using WiFi
    • Fixed RMS not displaying WAN IP with WAN failover

RUT2XX_R_00.01.11.2 | 2019.11.12

  • Fixes:
    • TR-069 WAN type value fix
    • RMS batch number instead of product code bug fix
    • Added missing HMAC options and PKCS12 support to OpenVPN

RUT2XX_R_00.01.11.1 | 2019.10.21

  • New features:
    • Auto APN
    • SMS Utilities Auto APN toggling
    • Operators control & support for JioAPN
    • Package Manager
    • RMS wireless monitoring
    • Port based VLAN configuration
    • I/O power socket pinout image
    • VRRP advertisement interval option
  • Improvements:
    • UPnP updated to version 2.1
    • SIM switching optimizations
    • Faster SSH private key generation on first boot
    • Added network, serving and neighbor cell information to Troubleshoot files
  • Fixes:
    • Wget Reboot minimal interval for action 'reboot' added
    • Ping Reboot packet size 0 fix
    • Modbus WebUI fixes
    • Modbus WiFi/Mobile on/off fix
    • SMS Utilities table validation fix
    • SMS Utilities UCI API fixes
    • SMS Utilities SMS response status fix
    • SMS-Utilities WiFi/Mobile on/off fix
    • Clarified WebUI options for SMS Forwarding
    • Hotspot Statistics tab shows incorrect information fix
    • Hotspot session name validation fix
    • Hotspot landing page file upload limits increased
    • Fixed MAC address clone configuration
    • Fixed sessions table dependency on authentication mode
    • Events log network type logging on modem service restart fix
    • Events Reporting typos that prevented rules being matched fixes
    • WAN Failover option disappearing after language change fix
    • Removed unnecessary fix_sta_ap.sh from syslog messages
    • Removed OpenVPN converting names to hex
    • Added file upload limits
    • DDNS name validation fix
    • Hostname and router name after backup upload fix
    • Mobile Data Limit firewall rule init fix
    • Added missing password validation
    • Fixed default VRRP config to follow RFC 2338
    • Changed packages names in Package Manager
    • Input/Output label & functionality fixes
    • FOTA memory calculation fix
    • Removed "Site Survey" page

RUT2XX_R_00.01.10 | 2019.07.12

  • New features:
    • New flash validation added
  • Improvements
    • Added reply after mobileon and mobileoff SMS Utilities commands
  • Fixes:
    • Firmware upgrade with keep settings fix
    • PPTP fix when upgrading firmware with keep settings
    • Do not autocomplete non-system passwords fix
    • Added validation for 'Service mode' change
    • VRRP template fix
    • Added validation for user group number format
    • SMS Gateway: removed new line add after configuration save
    • Added validation to prevent shell command execution via 'name' field in Wake on LAN
    • NTP time zone options fix
    • MQTT bridge with SSL/TLS connection fix
    • 'Use DNS servers advertised by peer' does not save fix
    • 'FW update available' fix
    • WAN state and IP print fixes

RUT2XX_R_00.01.07.1 | 2019.06.10

  • Fixes:
    • Increased RMS HTTP Proxy resource limit

RUT2XX_R_00.01.07 | 2019.05.31

  • New features:
    • SNMP: Individual port status added
    • openssl: update to version 1.0.2r
    • dropbear: update to version 2019.78
    • busybox: update to version 1.30.1
    • uci: update to version 2018-08-11
    • ubus: update to version 2018-10-06
    • ubox: update to version 2019-04-07
    • libubox: update to version 2019-02-27
    • MQTT: added MQTT support
    • WebUI: add additional band support for EC25
    • UPnP: UPnP added
    • WebUI: add events reporting and reporting configuration support
    • Flash: Add XT25F128B flash support
    • Strongswan: Custom option added
    • WebUI: upload backup from lower firmware version support
  • Fixes:
    • Wireless: Station availability when two or more Access Points are created fix
    • Mobile Graphs: Color and line adjustments
    • WebUI: Overview->Network->Topology: WAN Failover redirection fix
    • Strongswan: Shared-keys fix
    • WebUI: fix input validation issues
    • Mobile traffic: graph fixes
    • WebUI: fix LEDs Indication setting
    • QMI2: set 1st context to IPv4
    • Hotspot: Restrict internet access fix
    • Hotspot: 'Invalid' prompt after deleting session fix
    • IPSec: No shared key validation added
    • Email-to-SMS: longer SMS fix
    • IPSec: Allow WebUI access with HTTPS fix
    • RMS: fixed disable on sysupgrade with keep settings
    • WebUI: LEDs Indication hint text fix
    • IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
    • SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
    • Wireless: Regulatory domain and channel change fix
    • SMS-Management: Error message after successful SMS send fix
    • Services: SNMP Trap redirection fix
    • Periodic Control: Rule addition in Chromium fix
    • Setup Wizard: Dialing number disappearing fix
    • WAN: After interface edit, redirect back to main WAN window fix
    • SNMP: Teltonika MIB file fix
    • rms_mqtt: HTTPs proxy fix
    • rms_json: Fixed WAN State and WAN IP
    • Wireless: STA connection loss fix
    • QoS: Speed limitation fix
    • Stunnel: Removed unnecessay WebUI options, added validation.
    • Port Scan Prevention: Disable fix
    • Port Scan Prevention: Warning message for remote access added
    • ledman: fixed led issue when there is no connection
    • ledman: fixed led issue when rebooting router with reset button
    • Wireless: Channel frequency dispaly fix
    • Administration: RMS 'infobox' fix
    • Setup Wizard: RMS 'infobox' fix
    • Setup Wizard: Validation and redirection fixes
    • VRRP: updated to 1.15 version
    • LAN: Static leases fix
    • Backup: Redirection to 127.0.0.1 after backup load fix
    • Network: 'Use WAN as LAN' availability fix
    • WebUI: WAN as LAN when using main WAN WIFI fix
    • Network: Delete static protocol options after change to DHCP fix
    • L2TP and PPTP: updated services

RUT2XX_R_00.01.06.1 | 2019.03.18

  • New features:
    • Added 'More' SMS Utilities rule
  • Fixes:
    • RMS reconnect issue fix
    • Hotspot authentication mode change fix
    • Overview widget fixes
    • Connection uptime widget fix
    • SMS Management inbox read fix
    • Wireless scan fix
    • SSTP service update
    • SMS-Utilities: various functionality fixes
    • Restore-Point: Removed the ability to load restore points of a different router
    • VLAN: LAN Network configuration backup fix
    • Maximum length SMS message send fix
    • Long SMS messages stretch out WebUI fix
    • Ping Reboot: reboots after service is disabled fix
    • Removed warning message when scanning for WiFi STA
    • Setup Wizard WiFi channel select custom option remove fix
    • Call Utilities: double zero in front of the number fix
    • Setup Wizard: you cannot procceed with setup if you disable DHCP fix
    • Restore to default percentage counting fix
    • WoL: Use WAN as LAN fix
    • Network Operators: Typo fix
    • Events log: Typo fixes
    • Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
    • Hotspot: configuration saves without advertisement address fix
    • WiFi channel frequency display fix
    • Mobile Traffic: daily statistics show wrong time fix
    • STunnel text display fix
    • IPSec text display fix
    • OpenVPN remove TLS clients in TAP mode fix
    • Hotspot: Tab placement fix
    • Overview: Text changes
    • SMS-Utilities: 'uci show' fix
    • WebUI: added connection band info to mobile status page
    • Mobile: fix for LTE band default value for different regions
    • RMS: fixed logread messages
    • I/O: fixed output state labels

RUT2XX_R_00.01.05.1 | 2019.02.22

  • New features:
    • Added Wake on LAN functionality
    • Added Wake on LAN SMS Utilities rule
    • Added STunnel feature to VPN services
  • Improvements:
    • Added every WAN interface selection to Qos
    • Add modem restart option to Periodic Reboot
    • Updated curl to version 7.64.0
    • Updated OpenSSL to version 1.0.2q
  • Fixes:
    • L2TP network restart after connection loss fix
    • OpenVPN service restart when TLS-Password is changed fix
    • Mobile IP and gateway fix
    • Overview OpenVPN widget display fix
    • IPSec psk_key save after older firmware upgrade fix
    • Configuration backup and firmware upgrade stuck on the 'downloading' page fix
    • SNMP memory leak fix
    • Mobile data limit keep limit after firmware upgrade with keep settings fix
    • Remote access information fix
    • L2TP IP range change fix
    • Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
    • Hotspot firewall rules fix
    • Data-only SIM fix
    • Wireless Station and Access Point fixes
    • Deleted unnecessary IPsec keep alive option
    • Fixed GRE Tunnel connection
    • Removed NOTRACK target from firewall rules
    • WAN IP not showing on Login page fix
    • DDNS process kill fix
    • WAN selected as LAN fix
    • IPSec restart when backup mobile fails fix
    • RMS memory usage fix
    • CLI Connect button fix
    • Mobile traffic counter resetting fix
    • Multiple OpenVPN related fixes
    • Ping Reboot fix

RUT2XX_R_00.01.04.2 | 2018.12.20

  • Fixes:
    • SSH security fix
    • Mobile page fix

RUT2XX_R_00.01.04.1 | 2018.11.15

  • New features:
    • Added NTP server, force servers option for ntpclient
    • Added selectable network band support
    • Added SSTP
    • Replace bird routing package with quagga package
    • Added WiFi MAC Filter address range support
    • Changed RMS communication protocol to use MQTT instead of OpenVPN
    • Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
  • Improvements
    • Updated mobile operator database
    • Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
    • Sensitive information (usernames and passwords) removed from router's Troubleshoot file
    • Added warnings to Call Utilities when on 4G-only mode
  • Fixes:
    • Fixed multiwan restart sequence issues causing VPN instabilities
    • Static Routes fix
    • WiFi updates and security fixes
    • Minor improvements and bug fixes for operator selection
    • SNMP MIB values and file format fix
    • SNMP Hotspot and serial values fix
    • Redirect to login page after factory reset fix
    • IPsec init script fix
    • Overview WiFi widget fix
    • Modbus WiFi enable/disable fix
    • Modbus APN write and memory leak fixes
    • JavaScript code multiplication fix
    • DHCP server lease time validation update fix
    • Hang up on watchdog reset fix
    • Overview mobile WAN IP display fix
    • curl: update to 7.62.0
    • OpenSSL: update to 1.0.2p
    • cacert: update to 2018-10-17
    • arptables segmentation fault fix
    • quectel-CM: updated to latest version
    • GRE Tunnel delete after button press fix
    • Update Teltonika contact address in Licenses page
    • Disabled passthrough and bridge selection when multiwan is enabled
    • Fixed lua dispatcher error after reboot
    • Fixed multiwan metrics and priorities
    • SMS Utilities SMS status WAN IP with multiwan fix

RUT2XX_R_00.01.03.5 | 2018.10.23

  • Fixes:
    • VPN shutdown at delete fix
    • PPTP default gateway set and delete fix
    • OpenVPN status fix
    • OpenVPN configuration section name compatibility fix
    • IPsec redirect after save fix
    • Overview VRRP widget status fix
    • Hotspot start after reboot fix
    • Added default LAN IPv6 address
    • Overview WAN wiki link fix
    • Hotspot overview fix
    • Mobile data counter reset fix

RUT2XX_R_00.01.03.2 | 2018.09.05

  • New features:
    • Added operators control with white/black list feature
    • Added Administration -> Root CA page
  • Improvements:
    • Added many security updates
    • Added firmware update information
    • Added CellID information to Troubleshoot file
  • Fixes:
    • GPL: compilation fixes
    • Configuration restore fix
    • Disabled Hotspot users' ability to reach LAN devices and WebUI
    • Port Forwarding IP validation fix
    • System -> Administration -> Overview page loading fix when VPN configuration exists
    • Some minor DHCP display fixes
    • Call Utilities reboot action partial message fix
    • DDNS IP source change and added time selection
    • OpenVPN service fixes
    • Some minor QoS fixes
    • Some minor OpenVPN fixes
    • Configuration Wizard: LAN page redirect fix
    • Overview WAN IP fix
    • Added Redirect to HTTPS information
    • Troubleshoot TCPdump fix
    • Changed 'Backup WAN' to 'WAN Failover'
    • WebUI: language translation in some pages fix
    • Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
    • Overview VPN widget IP fix

RUT2XX_R_00.01.02.6 | 2018.08.22

  • Fixes:
    • Fixed GPL Readme
    • Fixed JavaScript password validation

RUT2XX_R_00.01.02.3 | 2018.06.08

  • Fixes:
    • Fixed RMS status in overview page
    • Fixed LTE signal strength graph

RUT2XX_R_00.01.01.4 | 2018.05.16

  • New features:
    • Added DHCP Force option
    • Added RMS connection page to Setup Wizard
    • Added forced password change
  • Improvements:
    • Updated Overview widget icons, added Teltonika Wiki links
    • Added private key decryption function to OpenVPN client configuration
    • Added additional DPD options
  • Fixes:
    • Fixed Wget reboot URL datatype
    • WebUI: SSH access status fix
    • Added special symbols exception to SMS-Forwarding
    • Added missing Events Reporting config for SMS-Utilities
    • PPP enable/disable bug fix
    • Multiple Call Utilities fixes
    • SMS event queries fix
    • Removed unnecessary sim_switch message text
    • Some SSH security fixes
    • Updated Modbus sources and coding table
    • Multiple OpenVPN bug fixes
    • Graphs/Signal strength fix when using HSDPA+HSUPA network type
    • Fixed VLAN DHCP leasing
    • Administration password change fix
    • STA mode logic changed
    • Hotspot bandwith limit fix
    • Moved IP alias gateway to advanced features
    • Administration -> Overview fix
    • Factory reset fix due to mobile connection problems

RUT2XX_R_00.01.00 | 2018.03.19

  • Improvements:
    • Added hostname validation for Wget Reboot
    • New versioning logic
  • Fixes:
    • Output ON/OFF fix
    • Firmware Upgrade fix
    • SSH authentication logging fix

RUT2XX_R_00.00.553 | 2018.03.09

  • New features:
    • Added Redirect LAN to GRE function
  • Fixes:
    • Mobile Data Limit fixes
    • User's password removed from users table
    • Firmware upgrade message fixed

RUT2XX_R_00.00.539 | 2018.03.01

  • Fixes:
    • Minor Openvpn functionality fixes

RUT2XX_R_00.00.486 | 2018.02.27

  • New features:
    • Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )

RUT2XX_R_00.00.482 | 2018.02.22

  • Fixes:
    • Updated SMS send satus
    • Added Modbus enable check-box
    • Added firewall rule so the router would be reachable from WAN when access control is enabled

RUT2XX_R_00.00.474 | 2018.02.20

  • Improvements:
    • Added download MIBS button to SNMP page
  • Fixes:
    • Fixed style for VPN service pages, Modbus page

RUT2XX_R_00.00.388 | 2018.02.19

  • New features:
    • Added Relayd function that can make the router act like a wireless range extender

RUT2XX_R_00.00.382 | 2018.02.06

  • Fixes:
    • Fixed Wi-Fi logging to FTP function
    • Fixed site blocking file parsing
    • System Information texts fix

RUT2XX_R_00.00.377 | 2018.01.31

  • New features:
    • IPsec: added Transport mode, Firewall options, local IP management options
  • Improvements:
    • Moved Disable NAT flags from VPN to Firewall page
  • Fixes:
    • Fixed Firewall config for hotspot interface assignment
    • DMZ rule position fix

RUT2XX_R_00.00.372 | 2018.01.16

  • Improvements:
    • Added binero.se to DDNS service providers list
    • Added some additional SMS Utilities hints
    • Added support for changing Wireless SSID name from branding script
    • Improved Email to SMS function
  • Fixes:
    • WAN port status display fix
    • Fixed SMS Utilities Write to config bug when sending mobileoff message
    • Whitelist blocking fix in Site Blocking

RUT2XX_R_00.00.355 | 2018.01.05

  • New features:
    • Added WPA-Enterprise encryption type support for Wi-Fi Access Points
    • Added Email To SMS, SMS Forwarding functions
    • Added Wget Reboot function
  • Improvements:
    • Updated fw upgrade validation for future firmwares
  • Fixes:
    • Fixed bug of not being able to use hostnames as a destination for Ping Reboot
    • Input/Output Scheduler backup bug fix
    • System->Administration page style fixes
    • Removed wifid due to security issues
    • Configuration Backup bug fixes

RUT2XX_R_00.00.339 | 2018.01.02

  • New features:
    • Added IPsec option for WebUI access through tunnel
    • Added Reset button custom hold time configuration
  • Fixes:
    • Minor Mobile Data Limit bug fix
    • Renamed mibs file to TLT-MIB.txt
    • Temperature display fix
    • Added Async Control Character Maps
    • Fixed minor grammatical errors in the WebUI
    • OpenVPN hints fix

RUT2XX_R_00.00.312 | 2017.12.08

  • Fixes:
    • Some minor PPTP Server and Client functionality fixes
    • Added fix to PPP Connection Type due to disconnecting mobile connection
    • Real traffic fix

RUT2XX_R_00.00.307 | 2017.12.05

  • New features:
    • Added Hotspot configuration profiles
  • Improvements:
    • Added custom redirect address
    • Added troubleshoot file download protection
  • Fixes:
    • Some minor Hotspot functionality fixes
    • Mobile data logging fix
    • Some minor Dynamic DNS functionality fixes

RUT2XX_R_00.00.296 | 2017.11.23

  • Improvements:
    • SMS Utilities fw_upgrade rule now works with Keep Settings
  • Fixes:
    • Minor Reregister function fix
    • Use IPv4 only fix
    • Minor mobile interface fix
    • Some minor Site Blocking fixes
    • Connect to hidden WiFi AP fix
    • Multiwan metric change fix for RUT230

RUT2XX_R_00.00.284 | 2017.11.03

  • Improvements:
    • Improved Mobile Data Limit functionality
    • Improved Load Balancing functionality
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_firmware_change_log&oldid=84971"