Template:Networking rutos manual gps: Difference between revisions
No edit summary |
Gytispieze (talk | contribs) No edit summary |
||
(16 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
<!-- Template uses {{{name}}}, {{{series}}} --> | <!-- Template uses {{{name}}}, {{{series}}} --> | ||
{{Template:Networking_rutos_manual_fw_disclosure | {{Template: Networking_rutos_manual_fw_disclosure | ||
| fw_version = {{{series}}}_R_00. | | fw_version = {{{series}}}_R_00.07.01 | ||
| series = {{{series}}} | | series = {{{series}}} | ||
}} | }} | ||
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} GPS (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.</i>|}} | |||
==Summary== | ==Summary== | ||
The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices. | The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices. | ||
==General== | ==General== | ||
Line 58: | Line 46: | ||
<span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds. | <span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds. | ||
==Map== | |||
The <b>Map</b> page displays the device's current coordinates and position on the map. To see the device's location on the map, make sure to attach the GPS antenna on the device and enable GPS in the [[#General|General]] page. | |||
The figure below is an example of the Map page: | |||
[[File:Networking_rutos_manual_gps_map.png|border|class=tlt-border]] | |||
==NMEA== | ==NMEA== | ||
Line 67: | Line 63: | ||
The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section: | The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section: | ||
[[File:Networking_rutos_manual_gps_nmea_nmea_forwarding.png]] | [[File:Networking_rutos_manual_gps_nmea_nmea_forwarding.png|border|class=tlt-border]] | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 82: | Line 78: | ||
<tr> | <tr> | ||
<td>Hostname</td> | <td>Hostname</td> | ||
<td>ip | host; default: ''' | <td>ip | host; default: '''none'''</td> | ||
<td>IP address or hostname of the server to which NMEA data will be forwarded.</td> | <td>IP address or hostname of the server to which NMEA data will be forwarded.</td> | ||
</tr> | </tr> | ||
Line 144: | Line 140: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td>File</td> | ||
<td>filepath; default: <b>none</b></td> | <td>filepath; default: <b>none</b></td> | ||
<td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td> | <td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td> | ||
Line 255: | Line 251: | ||
<tr> | <tr> | ||
<td>Enabled</td> | <td>Enabled</td> | ||
<td>off | on | <td>off | <span style="color: #20C0D7;"><b>on</b></span> default: <b>off</b></td> | ||
<td>Turns data sending to HTTP/HTTPS server on or off.</td> | <td>Turns data sending to HTTP/HTTPS server on or off.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>URL</td> | <td><span style="color: #20C0D7;">URL</span></td> | ||
<td>url string; default: <b>192.168.1.5</b></td> | <td>url string; default: <b>192.168.1.5</b></td> | ||
<td>URL of remote server.</td> | <td>URL of remote server.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Delay</td> | <td><span style="color: #20C0D7;">Delay</span></td> | ||
<td>integer; default: <b>5</b></td> | <td>integer; default: <b>5</b></td> | ||
<td>Time interval in seconds between sending packages.</td> | <td>Time interval in seconds between sending packages.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Line 273: | Line 269: | ||
---- | ---- | ||
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server: | The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server: | ||
{{#ifeq: {{{name}}} | RUT955 | [[File:Networking_rut955_manual_gps_https_tavl_settings.png|border|class=tlt-border]] | |||
[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]] | | [[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]] | ||
}} | |||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 283: | Line 280: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td>Signal</td> | ||
<td>off | on; default: <b>off</b></td> | <td>off | on; default: <b>off</b></td> | ||
<td>Includes GSM signal strength information in the GPS data sent to server.</td> | <td>Includes GSM signal strength information in the GPS data sent to server.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td>Input/Output (<i>various</i>)</td> | ||
<td>off | on; default: <b>off</b></td> | <td>off | on; default: <b>off</b></td> | ||
<td>Includes | <td>Includes Input/Output status information in the GPS data sent to server.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Line 314: | Line 311: | ||
<td>off | on; default: <b>off</b></td> | <td>off | on; default: <b>off</b></td> | ||
<td>Turns data sending to AVL server on or off.</td> | <td>Turns data sending to AVL server on or off.</td> | ||
</tr> | |||
<tr> | |||
<td>Retry on Fail</td> | |||
<td>off | on; default: <b>off</b></td> | |||
<td>Turn retries in case of a failed attempts on or off. When turned on, the device will try to send the same data to the server until the transmission is successful.</td> | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Hostname</td> | <td>Hostname</td> | ||
<td>ip | host; default: | <td>ip | host; default: <b>192.168.0.1</b></td> | ||
<td>IP address or hostname of an AVL server.</td> | <td>IP address or hostname of an AVL server.</td> | ||
</tr> | |||
<tr> | |||
<td>Protocol</td> | |||
<td>TCP | UDP; Default: <b>TCP</b></td> | |||
<td>Protocol that will be used for communication with the AVL server.</td> | |||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 326: | Line 333: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td>Don't Contain Connection</td> | ||
<td> | <td>off | on; default: <b>off</b></td> | ||
<td> | <td>When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication.</td> | ||
</tr> | </tr> | ||
</table> | </table> | ||
Line 394: | Line 401: | ||
Refer to the figure and table below for information on the configuration fields of the Secondary rules section. | Refer to the figure and table below for information on the configuration fields of the Secondary rules section. | ||
[[File: | [[File:Networking_rutos_manual_gps_avl_secondary_rules_{{{series}}}_v1.png|border|class=tlt-border]] | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 413: | Line 420: | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
<td> | <td>Ignore</td> | ||
<td>Low | <td>off | on; default: <b>off</b></td> | ||
<td>If enabled, the rule ignores state of input.</td> | |||
</tr> | |||
<tr> | |||
<td>IO level</td> | |||
<td>Low level {{!}} High level {{!}} Both; default: <b>High level</b></td> | |||
<td>Selects which input state will trigger the rule.</td> | <td>Selects which input state will trigger the rule.</td> | ||
</tr> | |||
<tr> | |||
<td>IO type</td> | |||
<td>GPIO; default: <b>GPIO</b></td> | |||
<td>Selects input type.</td> | |||
</tr> | |||
<tr> | |||
<td>IO name</td>{{#switch:{{{series}}} | |||
| RUT9 =<td>Input (3) {{!}} Input (1) {{!}} Isolated Input (2,7); default: <b>Input (1)</b></td> | |||
| RUTX =<td>Input (4); default: <b>Input (3)</b></td> | |||
| TRB2 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}} | |||
<td>Selects which specific input will trigger the rule.</td> | |||
</tr> | </tr> | ||
<tr> | <tr> |
Revision as of 09:16, 15 October 2021
Template:Networking rutos manual fw disclosure
Summary
The Global Positioning System (GPS) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices.
General
The General is used to enable the GPS service and the support for different types satellites. Once you turn on GPS, you can check the [[{{{name}}}_GPS#Map|Map]] page in order to see if the device has obtained a GPS fix. It is very important to attach the GPS antenna on the device and place it outside (not inside of a building). The device will not be likely to obtain a GPS fix otherwise.
The figure below is an example of the General page and the table below provides information on the fields contained in that page:
Field | Value | Description |
---|---|---|
Enabled | off | on; default: off | Turns the GPS service on or off. |
Galileo NMEA support* | off | on; default: off | Turns support for Galileo satellites on or off. |
Glonass NMEA support* | off | on; default: off | Turns support for Glonass satellites on or off. |
BeiDou NMEA support* | off | on; default: off | Turns support for BeiDou satellites on or off. |
*Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds.
Map
The Map page displays the device's current coordinates and position on the map. To see the device's location on the map, make sure to attach the GPS antenna on the device and enable GPS in the General page.
The figure below is an example of the Map page:
NMEA
The NMEA page is used to configure settings related to NMEA sentence collecting and forwarding.
NMEA forwarding
The NMEA forwarding section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section:
Field | Value | Description |
---|---|---|
Enabled | off | on; default: off | Turns NMEA forwarding on or off. |
Hostname | ip | host; default: none | IP address or hostname of the server to which NMEA data will be forwarded. |
Port | integer [0..65535]; default: 8500 | Port number off the server to which NMEA data will be forwarded. |
Protocol | TCP | UDP; default: TCP | Protocol that will be used to send NMEA data. |
NMEA forwarding cache
The device caches NMEA forwarding information if NMEA forwarding is enabled. This section is used to select the memory type where the cache will be stored and the maximum amount of data that will be saved:
Field | Value | Description |
---|---|---|
Save cache in | RAM Memory | FLASH Memory; default: RAM Memory | Selects which type of memory will be used for storing NMEA forwarding cache. |
Maximum sentences | integer; default: 5000 | Maximum amount of NMEA sentences that will be saved in the cache before older entries are deleted and replaced by new ones. |
File | filepath; default: none | Location of the file where NMEA forwarding cache information will be stored. This field becomes visible only when the selected memory type is "flash". |
NMEA collecting
The NMEA collecting section is used to enable NMEA sentence gathering and storing. The figure below is an example of the NMEA collecting section and the table below provides information on the fields contained in that section:
Field | Value | Description |
---|---|---|
Enabled | off | on; default: off | Turns NMEA sentence collecting on or off. |
File | filepath; default: none | Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled. |
NMEA sentence settings
The NMEA sentence settings section provides the possibility to configure which NMEA sentences will be forwarded or collected and at what frequency. The figure below is an example of the NMEA sentence settings section and the table below provides information on the fields contained in that section:
Field | Value | Description |
---|---|---|
Forwarding enabled | off | on; default: off | Enables forwarding for the adjacent NMEA sentence. |
Forwarding interval | positive integer; default: 5 | NMEA sentence forwarding frequency in seconds. |
Collecting enabled | off | on; default: off | Enables collecting for the adjacent NMEA sentence. |
Collecting interval | positive integer; default: 5 | NMEA sentence collecting frequency in seconds. |
NMEA sentence reference table:
NMEA sentence name | Description |
---|---|
GPGSV | Number of GPS satellites in view. |
GPGGA | GPS fix data. |
GPVTG | Track made good and speed relative to the ground. |
GPRMC | Recommended minimum specific GPS/Transit data. |
GPGSA | GPS DOP and active satellites. |
GNGSA | GLONASS DOP and active satellites. |
GLGSV | Number of GLONASS satellites in view. |
GNGNS | GNSS position fix from more than one constellation (e.g., GPS + GLONASS). |
GAGSV | Number of Galileo satellites in view. |
PQGSV | Detailed satellite data (used in BeiDou sentences). |
PQGSA | Overall satellite data (used in BeiDou sentences). |
HTTPS
The HTTPS page can be used to configure data sending to an HTTP(S) server.
HTTPS/HTTP server settings
The HTTPS/HTTP Server Settings section is used to enable GPS data sending to an HTTP or HTTPS server.
Field | Value | Description |
---|---|---|
Enabled | off | on default: off | Turns data sending to HTTP/HTTPS server on or off. |
URL | url string; default: 192.168.1.5 | URL of remote server. This field becomes visible when Enabled is set to 'on'. |
Delay | integer; default: 5 | Time interval in seconds between sending packages. This field becomes visible when Enabled is set to 'on'. |
TAVL settings
The TAVL settings section is used to select which data will be sent to the TAVL server:
Field | Value | Description |
---|---|---|
Signal | off | on; default: off | Includes GSM signal strength information in the GPS data sent to server. |
Input/Output (various) | off | on; default: off | Includes Input/Output status information in the GPS data sent to server. |
AVL
The AVL page is used to set up GPS data sending to an AVL server.
AVL server settings
The AVL server settings section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section:
Field | Value | Description |
---|---|---|
Enabled | off | on; default: off | Turns data sending to AVL server on or off. |
Retry on Fail | off | on; default: off | Turn retries in case of a failed attempts on or off. When turned on, the device will try to send the same data to the server until the transmission is successful. |
Hostname | ip | host; default: 192.168.0.1 | IP address or hostname of an AVL server. |
Protocol | TCP | UDP; Default: TCP | Protocol that will be used for communication with the AVL server. |
Port | integer [0..65535]; default: 8501 | TCP/UDP port number of the AVL server to which the device will be connecting. |
Don't Contain Connection | off | on; default: off | When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication. |
Main rule
The Main rule section defines how and when GPS data will be collected and sent to a specified AVL server. Refer to the figure and table below for information on the configuration fields of Main Rule.
Field | Value | Description |
---|---|---|
Enable | off | on; default: on | Turns the main rule on or off. |
Rule priority | Low priority level | High priority level | Panic priority level | Security priority level; default: Low priority level | The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first. Priority levels from highest to lowest are as follows:
|
Collect period | integer [1..999999]; default: 5 | How often (in seconds) data will be collected. |
Min distance | integer [1..999999]; default: 50 | Minimum distance change (in meters) before sending records. |
Min angle | integer [1..360]; default: 50 | Minimum angle change (in degrees) before sending records. |
Min saved records | integer [1..32]; default: 20 | Minimum amount of gathered records before sending. |
Send period | integer [0..999999]; default: 60 | How often (in seconds) gathered data is sent. |
Secondary rules
The Secondary rules section provides you with the possibility to create additional data sending rules. The difference from the main rule is that the secondary rules only send data when the device uses a specified type of WAN and when the digital isolated output is in the specified state.
Refer to the figure and table below for information on the configuration fields of the Secondary rules section.
[[File:Networking_rutos_manual_gps_avl_secondary_rules_{{{series}}}_v1.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Turns the secondary rule on or off. |
WAN | Mobile Both | Mobile Home | Mobile Roaming | Wired; default: Mobile Home | Selects which type of WAN will trigger the rule. |
Ignore | off | on; default: off | If enabled, the rule ignores state of input. |
IO level | Low level | High level | Both; default: High level | Selects which input state will trigger the rule. |
IO type | GPIO; default: GPIO | Selects input type. |
IO name | Selects which specific input will trigger the rule. | |
Rule priority | Low priority level | High priority level | Panic priority level | Security priority level; default: High priority level | The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first. Priority levels from highest to lowest are as follows:
|
Collect period | integer [1..999999]; default: 10 | How often (in seconds) data will be collected. |
Min distance | integer [1..999999]; default: 25 | Minimum distance change (in meters) before sending records. |
Min angle | integer [1..360]; default: 25 | Minimum angle change (in degrees) before sending records. |
Min saved records | integer [1..32]; default: 10 | Minimum amount of gathered records before sending. |
Send period | integer [0..999999]; default: 10 | How often (in seconds) gathered data is sent. |
TAVL settings
The TAVL settings section is used to select which data will be sent to the TAVL server:
Field | Value | Description |
---|---|---|
Send GSM signal | off | on; default: off | Includes GSM signal strength information in the GPS data sent to server. |
Send digital input | off | on; default: off | Includes digital input state in the GPS data sent to server. |
AVL I/O
The AVL I/O tab provides you with the possibility to configure input rules.
Input Rules
The Input Rules section displays existing input rules. To create a new input rule look to the section below (AVL Input Configuration), select input type, trigger and click the 'Add' button.
[[File:Networking_rutos_manual_gps_avl_io_input_rules_add_button_config_io_{{{config_io}}}.png|border|class=tlt-border]]
After this you should be redirected to configuration page of the newly added rule, which should look similar to this:
[[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_config_io_{{{config_io}}}.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Enable | off | on; default: on | Turns the input rule on or off. |
Input type | {{{input_types}}}; default: Input (3) | Selects to which input the rule will apply. |
Trigger | Input active | Input low | Both; default: Input active | The event that will trigger the rule. |
Priority | Low | High; default: Low | The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first. Priority levels from highest to lowest are as follows:
|
GPS Geofencing
A geofence is a virtually defined boundary for a real-world geographic area. The GPS Geofencing page provides you with the possibility to set this custom area and apply rules that will inform you when the device leaves or enters the geofence.
To create a new geofence area, enter a custom name for it and click the 'Add' button. A new geofence area configuration with the given name should appear in the "Geofencing" list. Click the button that looks like a pencil next to it to begin editing.
The figure below is an example of GPS Geofencing configuration and the table below provides information related to that configuration:
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Turns the Geofence rule on or off. |
Longitude (X) | degrees [-180.000000..180.000000]; default: 0.000000 | East-west position of a point on the Earth's surface. Combining this and the Latitude information will produce a point on the world map that will serve as the center of the geofence area. |
Latitude (Y) | degrees [-90.000000..90.000000]; default: 0.000000 | North-south position of a point on the Earth's surface. Combining this and the Longitude information will produce a point on the world map that will serve as the center of the geofence area. |
Radius | integer [1..999999]; default: 200 | Radius (in meters) of the geofence area. |
Generate event on | Exit | Enter | Enter/exit; default: Exit | Specifies whether the rule should be triggered when the device enters the geofence area, leaves it or on both events. |
Get current coordinates | - (interactive button) | Obtains the device's current coordinates and places them in the Longitude and Latitude fields. |
[[Category:{{{name}}} Services section]]