|
|
| (32 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | ===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18=== | + | ===='''[[Media:RUT2_R_00.07.01 WEBUI.bin|RUT2_R_00.07.01]]''' | 2021.11.18==== |
| − | | |
| − | * <b>New</b>
| |
| − | ** nftables support
| |
| − | | |
| − | * <b>Improvement</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
| |
| − | *** Improved SIM detection algorithm
| |
| − | *** Improved Multi-APN connection establishment time
| |
| − | ** <b>WebUI</b>
| |
| − | *** Improved Overview page performance
| |
| − | ** <b>System</b>
| |
| − | *** Changed hostname to router name
| |
| − | *** Updated OpenSSL to version 1.1.1t
| |
| − | *** Updated CA certificates to version 20211016
| |
| − | *** Updated libiwinfo to version 2022-08-19
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed IPv4, IPv6 mobile connection restarts
| |
| − | *** Fixed operator scanning when mobile interface is disabled
| |
| − | *** Fixed data limit and tracking when software flow offloading is enabled
| |
| − | *** Added network reload call before bringing the mobile interface up
| |
| − | *** Fixed Port-based VLAN ID calculation issue
| |
| − | *** Fixed PDP context authentication when using special characters
| |
| − | ** <b>Services</b>
| |
| − | *** Fixed event text for configurable inputs/outputs on I/O Juggler
| |
| − | *** Fixed I/O PIN3 value not changing via MODBUS TCP
| |
| − | *** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
| |
| − | *** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
| |
| − | *** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
| |
| − | *** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
| |
| − | *** Fixed OpenVPN keep alive setting migration issue
| |
| − | *** Fixed PPTP server name setting migration issue
| |
| − | *** Fixed missing WebUI issue caused by Email Relay installation
| |
| − | *** Fixed NTP's Operator Station Synchronization memory leak issue
| |
| − | *** Fixed test email validation
| |
| − | ** <b>System</b>
| |
| − | *** Fixed libcares vulnerability CVE-2022-4904
| |
| − | *** Fixed frr vulnerability CVE-2022-37035
| |
| − | *** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
| |
| − | *** Removed ability for non root users to edit scripts that get executed as root
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24===
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed Data Limit issue
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07===
| |
| − | | |
| − | * <b>Improvements</b>
| |
| − | ** <b>WebUI</b>
| |
| − | *** Improved data persistence between page refreshes
| |
| − | *** Improved page navigation behavior
| |
| − | *** Improved redirect logic to open configuration edit modals
| |
| − | *** Updated the 'Status -> Mobile' page
| |
| − | *** Updated interface card in the Overview page
| |
| − | *** Separated Sent and Received data bars on the chart in the Mobile Usage page
| |
| − | ** <b>Network</b>
| |
| − | *** Added an info message displayed when a faulty SIM card is inserted
| |
| − | *** Added ResIOT operator's APNs to the APN database
| |
| − | *** Improved mobile connection re-establishment after reboot
| |
| − | *** Improved mobile connection recovery in cases where it was lost unexpectedly
| |
| − | *** Improved 'Deny data roaming' operation when switching between operators
| |
| − | *** Changed default WiFi AP cipher to CCMP (AES)
| |
| − | *** Added the logging of MAC addresses rejected by a WiFi AP
| |
| − | ** <b>Services</b>
| |
| − | *** Added MQTT support to I/O Juggler
| |
| − | *** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
| |
| − | *** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
| |
| − | *** Added argument support for the 'Execute custom script' SMS rule
| |
| − | *** Added a frequency option 'schedule' Modbus Master
| |
| − | *** Added pagination to Events Reporting overview
| |
| − | *** Added limit to Events Reporting rule list
| |
| − | *** Added email logging for Events reporting
| |
| − | *** 'Sync with browser' button in the NTP page now also synchronizes the time zone
| |
| − | *** Added a limit of 30 for NTP instances
| |
| − | *** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
| |
| − | *** Added "make before break" option to IPsec configuration
| |
| − | *** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
| |
| − | *** Improved MODBUS Master connection handling to reduce connection count
| |
| − | *** Updated modbus request error messages
| |
| − | *** Added OpenVPN server ip block support
| |
| − | *** Added MQTT support for MODBUS Master alarms
| |
| − | *** Added the possibility to get the device's Ethernet port data via SNMP
| |
| − | ** <b>System</b>
| |
| − | *** Updated bash to version 5.1.16
| |
| − | *** Added detailed FW update failure error message to Events Log
| |
| − | *** Improved firmware upload/validation error messages
| |
| − | *** Updated Turkish language support
| |
| − | *** Added protocol column to IP block page
| |
| − | *** Added "vpns.log" file to the Troubleshoot package
| |
| − | *** Added Wireguard tunnel information to the Troubleshoot package
| |
| − | *** Updated default admin group access rights
| |
| − | *** Updated DFOTA notification to show "More info" only when the update is forced
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>WebUI</b>
| |
| − | *** Fixed MAC address showing on mobile interfaces
| |
| − | *** Fixed mobile cell ID displaying in hexadecimal
| |
| − | *** Fixed mobile data limit card creation in the Overview page
| |
| − | *** Fixed modem widget disappearing from the Overview page
| |
| − | *** Fixed Services page not displaying data after Thingworx package is installed
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed interface priority change issue
| |
| − | *** Fixed a Custom Firewall Rule editing issue
| |
| − | *** Fixed DMZ configuration saving while it is disabled
| |
| − | *** Fixed Port Scan script execution failure
| |
| − | *** Fixed Firewall zone duplication issue
| |
| − | *** Fixed call function when VoLTE is disabled
| |
| − | *** Fixed VoLTE control when IMS is not enabled
| |
| − | *** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
| |
| − | *** Fixed APN authentication when using empty credentials
| |
| − | *** Fixed manual APN selection from list
| |
| − | *** Fixed disabled WiFi interface after factory reset
| |
| − | *** Fixed WiFi interface creation with SAE mixed encryption
| |
| − | ** <b>Services</b>
| |
| − | *** Fixed I/O Scheduler overlapping instances issue
| |
| − | *** Fixed Input/Output image pin colors
| |
| − | *** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
| |
| − | *** Fixed WiFi Hotspot landing page uploaded theme image display
| |
| − | *** Fixed WiFi Hotspot trial user deletion issue
| |
| − | *** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
| |
| − | *** Fixed WiFi Hotspot password request by SMS
| |
| − | *** Fixed WiFi Scanner starting process when the WiFi interface is disabled
| |
| − | *** Added limitations on message size and quantity of email messages in Email to SMS
| |
| − | *** Fixed SMTP HELLO value parsing issue
| |
| − | *** Fixed SMS message window reset button
| |
| − | *** Fixed not being able to save empty 'Message text' field in Auto Reply
| |
| − | *** Fixed multi-part SMS concatenation
| |
| − | *** Fixed multi-part SMS processing
| |
| − | *** Fixed SMS error message on 'Mobile Data Reset' action
| |
| − | *** Fixed Data To Server JSON format %n, %N and %s flag issues
| |
| − | *** Fixed Events Reporting email data clean
| |
| − | *** Fixed Events Reporting missing config selections
| |
| − | *** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
| |
| − | *** Fixed IPsec instance deletion after removing DMVPN package
| |
| − | *** Fixed IPSec migration via Backup file when DMVPN is configured
| |
| − | *** Fixed IPsec naming issue when the includes an equals sign
| |
| − | *** Fixed L2TP client to use correct interface on failover events
| |
| − | *** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
| |
| − | *** Fixed MODBUS database size limiting issue
| |
| − | *** Fixed MODBUS MQTT Gateway client ID input
| |
| − | *** Fixed MODBUS TCP Slave RSSI value
| |
| − | *** Fixed MODBUS test button returning errors when several non-connected devices are configured
| |
| − | *** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
| |
| − | *** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
| |
| − | *** Fixed OpenVPN Static Key configuration saving by making Static key upload required
| |
| − | *** Fixed OpenVPN TLS client creation issue while LAN is down
| |
| − | *** Fixed Package Manager displaying non-existent packages
| |
| − | *** Fixed Package Manager errors showing up after successful installations
| |
| − | *** Fixed Periodic Reboot entry duplication after a power cycle
| |
| − | *** Fixed PPTP 'Client to client' option not being applied after save
| |
| − | *** Fixed receiving excessive device state emails after a reboot is initialized over RMS
| |
| − | *** Fixed WebUI unavailability after unsuccessful package install
| |
| − | ** <b>System</b>
| |
| − | *** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
| |
| − | *** Fixed bash vulnerability CVE-2022-3715
| |
| − | *** Fixed CGI-IO file download vulnerability CVE-2022-38333
| |
| − | *** Fixed libxml2 vulnerability CVE-2022-40304
| |
| − | *** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
| |
| − | *** Fixed LED animation during firmware upgrade
| |
| − | *** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
| |
| − | *** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
| |
| − | *** Improved file upload logic
| |
| − | *** Fixed GPL firmware compilation with selected Tinc package
| |
| − | *** Fixed OpenVPN Static Key migration via keep settings issue
| |
| − | *** Fixed NTP time zone name setting migration when the name contains whitespaces
| |
| − | *** Fixed language setting issue
| |
| − | *** Fixed integer validation on industrial services
| |
| − | *** Fixed LED indications when PDP type is IPv6
| |
| − | *** Fixed issues with PDP type and SMS limit period migration via keep settings
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Changed generic modem restart method
| |
| − | *** Fixed mobile page VoLTE switching issues
| |
| − | ** <b>Services</b>
| |
| − | *** Sanitized tcpdump storage location
| |
| − | ** <b>System</b>
| |
| − | *** Fixed legacy backup upload
| |
| − | *** Fixed upgrade from legacy FW issue with keep settings
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed disabled WiFi interface after factory reset
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===
| |
| − | | |
| − | * <b>New</b>
| |
| − | ** <b>System</b>
| |
| − | *** Japanese language
| |
| − | | |
| − | * <b>Improvements</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Optimized mobile netifd script installation
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Shortened modem hang monitor timeout
| |
| − | *** Fixed VLAN option setting when changing VLAN ID
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03===
| |
| − | | |
| − | * <b>Improvements</b>
| |
| − | ** <b>System</b>
| |
| − | *** Remove front-end certificate validation
| |
| − | ** <b>Network</b>
| |
| − | *** Optimized mobile netifd script installation
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed modem communication validation
| |
| − | *** Fixed connection establishment in IPv6 only mode
| |
| − | ** <b>Services</b>
| |
| − | *** Fixed libxml2 vulnerability CVE-2022-40303
| |
| − | *** Fixed an IPsec Phase one & two setting migration issue
| |
| − | *** Fixed OpenVPN migration from legacy firmwares
| |
| − | *** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
| |
| − | ** <b>System</b>
| |
| − | *** Fixed JSON key parsing; keys can now be any printable character sequence
| |
| − | *** Fixed memory leak in 'session' module
| |
| − | ** <b>WebUI</b>
| |
| − | *** Fixed file pretty name parsing
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16===
| |
| − | | |
| − | * <b>New</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Firewall DMZ page
| |
| − | ** <b>Services</b>
| |
| − | *** Java package
| |
| − | *** SFTP server support
| |
| − | *** OPC UA client
| |
| − | *** Hotspot registered users management page
| |
| − | ** <b>System</b>
| |
| − | *** Portuguese language
| |
| − | *** Spanish language
| |
| − | *** Turkish language
| |
| − | *** Email Relay package
| |
| − | ** <b>WebUI</b>
| |
| − | *** New Web menu design
| |
| − | | |
| − | * <b>Improvements</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Updated modem handling, attachment, tracking and connection establishment processes
| |
| − | *** Added the possibility to select multiple ports in all firewall port fields
| |
| − | *** Added 'Match' traffic by type option to firewall traffic rules
| |
| − | *** Added DNS servers and routing table fields to the Wireguard page
| |
| − | *** Improved generating network topology
| |
| − | *** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
| |
| − | *** Update Firewall Traffic Rules page with DSCP and MARK options
| |
| − | *** Added keepalive, holdtime and connect timers to BGP configuration
| |
| − | *** Added 'Use gateway metric' to network protocols web interface
| |
| − | *** Added more DHCPv6 client events to system log
| |
| − | *** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
| |
| − | *** Added option to select subnet parameters in mobile Passthrough/Bridge modes
| |
| − | *** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
| |
| − | *** Added mobile connection state for IPv6
| |
| − | *** Added individual WiFi toggle support
| |
| − | *** Added error message when DFS channel is selected during scanning
| |
| − | ** <b>Services</b>
| |
| − | *** Added CSP headers to Hotspot Landing Page
| |
| − | *** Added hotspot user script validation
| |
| − | *** Improved logging of disconnecting client devices
| |
| − | *** Implemented Hotspot 'forget' method, which removes user from DB by MAC
| |
| − | *** Added execute custom script SMS Utilities rule
| |
| − | *** Added receiver and transceiver mode support to SMPP
| |
| − | *** Added timezone synchronization with GSM operator option to NTP Client
| |
| − | *** Updated Zerotier web interface
| |
| − | *** Added IPsec Flush connection option on tunnel initialization
| |
| − | *** Added MODBUS slave regfile validation
| |
| − | *** Added delay, number of timeouts, always reconnect options to MODBUS Master service
| |
| − | *** Added DMVPN Phase 2 and Phase 3 support
| |
| − | *** Added synchronization counting to NTP client
| |
| − | *** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
| |
| − | *** Added 'Unregister' button to RMS page
| |
| − | *** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
| |
| − | *** Updated Zerotier package to version 1.10.1
| |
| − | *** Added automatic package removal upon failed installation in Package Manager
| |
| − | *** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
| |
| − | *** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
| |
| − | *** Updated sqm-scripts to version 1.5.1
| |
| − | *** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
| |
| − | *** Added monthly reboot option to periodic reboot function
| |
| − | *** Added support for multiple custom option selection to SSTP configuration
| |
| − | *** Added PKCS12 certificate chain support to OpenVPN
| |
| − | *** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
| |
| − | *** Added QoS selection to MQTT Modbus Gateway
| |
| − | *** Improved RAM usage during upload and installation of packages via Package Manager
| |
| − | *** Updated curl to version 7.86.0
| |
| − | *** Added brute-force prevention measures to Post/Get
| |
| − | *** Added automatic private and public key generation to Wireguard VPN
| |
| − | *** Added multiple Remote source IP support to IPsec
| |
| − | *** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
| |
| − | *** Added functionality to rotate log file when log is saved to Flash memory
| |
| − | *** Improved performance while fetching packages on repeat visits to the Package Manager page
| |
| − | ** <b>System</b>
| |
| − | *** Added a 'test mail' button to the Administration -> Recipients page
| |
| − | *** Added option to clear blocked IPs in the Access Control page after reboot
| |
| − | *** Updated Web Request-Response core logic
| |
| − | *** Added certificate validation to all services that support certificate upload
| |
| − | *** Updated URL protocol validations
| |
| − | *** Removed profile update requests during Save & apply
| |
| − | *** Optimized profile switching logic
| |
| − | ** <b>WebUI</b>
| |
| − | *** Added an indication to the Interfaces page that displays when data limit is enabled
| |
| − | *** Added bootloader version to the Device section in the System page
| |
| − | *** Added configuration page shortcuts to Overview page widgets
| |
| − | *** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
| |
| − | *** Updated network interfaces protocols web interface
| |
| − | *** Updated 404 page to include navigation menu
| |
| − | | |
| − | * <b>Fix</b>
| |
| − | ** <b>Network</b>
| |
| − | *** Fixed jumbo frames MTU issue
| |
| − | *** Added the 'Any' choice to source & destination IP address field in NAT rule edit
| |
| − | *** Fixed NHRP web interface issues
| |
| − | *** Fixed WAN interface configuration interfering with LAN
| |
| − | *** Fixed mdcollect memory leak issue
| |
| − | *** Fixed data limit not resetting properly
| |
| − | *** Fixed incorrect mobile data usage calculations for multiple day periods
| |
| − | *** Fixed an Auto APN 'Keep settings' issue
| |
| − | *** Fixed data counting after mobile data limit has been reached
| |
| − | *** Fixed mobile band not setting correctly on first try
| |
| − | *** Fixed incorrect data limit conditions causing unwanted SIM switches
| |
| − | *** Fixed Passthrough DHCP lease time setting
| |
| − | *** Fixed mobile bridge mode issue when no DNS servers are supplied
| |
| − | *** Added new Operator Lists instance name validations
| |
| − | *** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
| |
| − | *** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
| |
| − | *** Added wget tracking method to WAN Failover
| |
| − | *** Added interface checks to remove inaccurate Failover events from the Event Log
| |
| − | *** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
| |
| − | *** Fixed Failover fallback issue
| |
| − | ** <b>Services</b>
| |
| − | *** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
| |
| − | *** Fixed relay state switching
| |
| − | *** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
| |
| − | *** Added I/O restart on configuration profile change
| |
| − | *** Fixed I/O voltage range display for power socket pins
| |
| − | *** Fixed SMNP OID for I/O state
| |
| − | *** Fixed I/O Juggler SMS text message Save & Apply issue
| |
| − | *** Fixed Hotspot connected user list maximum upload/download value limits
| |
| − | *** Fixed incorrect connected Hotspot user information in RMS JSON
| |
| − | *** Removed unnecessary field from the Port Mirroring page
| |
| − | *** Fixed Hotspot issues related to specific connected phones
| |
| − | *** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
| |
| − | *** Fixed WiFi Scanner hostname validation issues
| |
| − | *** Fixed UCI SMS Rule return message to display new changes
| |
| − | *** Fixed DNP3 issues when asking for modem temperature
| |
| − | *** Fixed base64 encoding of SMS messages when forwarding to HTTP
| |
| − | *** Fixed SMS sending issues when using multiple APN
| |
| − | *** Added Gateway modem option to IP Block and WoL in SMS Rule edit
| |
| − | *** Fixed unblocking IP addresses with an SMS message
| |
| − | *** Fixed Mobile Utilities page not load properly on some occasions
| |
| − | *** Fixed dbus vulnerability CVE-2020-35512
| |
| − | *** Fixed dnsmasq vulnerability CVE-2022-0934
| |
| − | *** Fixed ext4 vulnerability CVE-2021-3428
| |
| − | *** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
| |
| − | *** Fixed libxm12 vulnerability CVE-2022-29824
| |
| − | *** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
| |
| − | *** Fixed MQTT DoS vulnerability CVE-2021-41039
| |
| − | *** Fixed privoxy vulnerability CVE-2021-44542
| |
| − | *** Fixed python3 vulnerability CVE-2022-42919
| |
| − | *** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
| |
| − | *** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
| |
| − | *** Fixed switching between RMS connection types while the device is unregistered
| |
| − | *** Fixed reload issues in website blocking feature
| |
| − | *** Fixed IPsec PSK secret required field validation
| |
| − | *** Fixed bandwidth limiting after QoS is enabled for the first time
| |
| − | *** Fixed Dropbear issues when logging in over IPv6
| |
| − | *** Fixed Modbus status in Status -> Services page
| |
| − | *** Fixed Azure IoT Hub application issues when sending large volumes of data
| |
| − | *** Fixed Azure IoT Hub MQTT password validation
| |
| − | *** Fixed DMVPN configuration migration issue
| |
| − | *** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
| |
| − | *** Fixed DMVPN IPsec connection issue
| |
| − | *** Fixed DMVPN mobile interface 'Keep settings' migration issue
| |
| − | *** Fixed Dynamic DNS long hostname text display issue
| |
| − | *** Fixed Events Reporting memory leak issue
| |
| − | *** Fixed Events Reporting not triggering after flipping an I/O slider
| |
| − | *** Fixed FOTA cron job not starting after factory reset
| |
| − | *** Fixed IPsec local firewall option parsing
| |
| − | *** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
| |
| − | *** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
| |
| − | *** Fixed NTP pool hostname validation
| |
| − | *** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
| |
| − | *** Fixed OpenVPN configuration saving issue when using HMAC key authentication
| |
| − | *** Fixed OpenVPN custom dev name transformation to correct format
| |
| − | *** Fixed OpenVPN device name setting logic when uploading config from file
| |
| − | *** Fixed OpenVPN instance status display
| |
| − | *** Fixed OpenVPN TAP (bridged) configuration detection
| |
| − | *** Fixed Qos configuration saving issue occurring after instance deletion
| |
| − | *** Fixed RMS JSON incorrect WAN state and IP information
| |
| − | *** Fixed RMS step access issue in the Setup Wizard page
| |
| − | *** Fixed SNMP issues after reboot while using a Hotspot
| |
| − | *** Fixed SNMP generating MIB files for devices in accordance with to their hardware
| |
| − | *** Fixed SNMP traps not working after SNMP is installed from server
| |
| − | *** Fixed SSTP client route creation issue
| |
| − | *** Fixed UPNP secure mode not turning off issue
| |
| − | *** Fixed Wireguard route to endpoint issue
| |
| − | *** Fixed manual package installation for queued packages
| |
| − | *** Fixed NAT Rules dependency from IPsec web instance
| |
| − | *** Returned usleep utility
| |
| − | *** Updated Australian and South African NordVPN server IP addresses
| |
| − | ** <b>System</b>
| |
| − | *** Fixed certificate signing issues
| |
| − | *** Fixed Telnet, CLI access blocking after max invalid tries
| |
| − | *** Fixed FW upgrade with 'Keep settings' while low free space is available
| |
| − | *** Fixed backup file duplication issue
| |
| − | *** Fixed network device handling in system
| |
| − | ** <b>WebUI</b>
| |
| − | *** Fixed Hotspot interface display
| |
| − | *** Fixed side widget accessibility during first login
| |
| − | *** Fixed file upload issues
| |
| − | *** Fixed drag and drop issue in the Traffic Rules page
| |
| − | *** Fixed protocol display in the overview of the Interfaces page
| |
| − | *** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
| |
| − | *** Fixed login errors after browser tab restoration
| |
| − | *** Fixed redirect to newly set IP address after Interface configuration
| |
| − | *** Fixed firmware upgrade verify spinner not closing
| |
| − | *** Fixed an issue with file upload via drag and drop
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12===
| |
| − | | |
| − | * <b>Improvements:</b>
| |
| − | ** Improved manual-auto connection mode
| |
| − | | |
| − | * <b>Fixes</b>
| |
| − | ** Fixed AT command for SMS storage usage
| |
| − | ** Fixed CVE-2022-1012 memory leak vulnerability
| |
| − | ** Fixed CVE-2022-37434 kernel vulnerability
| |
| − | ** Fixed interface option reset after VLAN ID change
| |
| − | ** Removed memory leak on port events
| |
| − | ** Fixed WiFi Scanner out of range crash when iterating collected data
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24===
| |
| − | | |
| − | * <b>Improvements:</b>
| |
| − | ** Added 'home.vodafone.de' APN
| |
| − | ** Improved stability of device information storage
| |
| − | | |
| − | * <b>Fixes:</b>
| |
| − | ** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
| |
| − | ** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240|
| |
| − | ** Fixed VoLTE management|}}
| |
| − | ** Fixed OpenVPN tls-auth and tls-crypt option names
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12===
| |
| − | | |
| − | * Improvements:
| |
| − | ** Updated curl to version 7.83.1
| |
| − | ** Updated firmware validation error messages
| |
| − | ** Added multiple source IP address support to the Port Forwards page
| |
| − | ** Increased custom APN Username & Password field maximum length to 64 symbols
| |
| − | ** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
| |
| − | ** Improved mobile connection status handling
| |
| − | ** Added CSP headers Hotspot WebUI landing page
| |
| − | | |
| − | * Fixes:
| |
| − | ** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
| |
| − | ** Fixed CVE-2022-30065 busybox vulnerability
| |
| − | ** Fixed file upload path traversal
| |
| − | ** Removed Data to Server limit to proccess less than 10 instances
| |
| − | ** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
| |
| − | ** Fixed OpenVPN dev setting logic
| |
| − | ** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
| |
| − | ** Fixed MAC and leasetime setting for Bridge & Passthrough modes
| |
| − | ** Fixed modal tabs navigation when editing wireless interface with non-english languages
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20===
| |
| − | | |
| − | * Improvements:
| |
| − | ** Added default password change warning message before firmware downgrade
| |
| − | ** Extended time period for device to make connection to operator
| |
| − | ** Reduced the number of modem reboots when changing mobile settings
| |
| − | ** Reduced excessive log output when no SIM card is inserted
| |
| − | ** Added modem restart prevention on modem init
| |
| − | ** Added disable RPLMN option in the SIM section of the SIM card config
| |
| − | | |
| − | * Fixes:
| |
| − | ** Fixed CVE-2022-2068 vulnerability
| |
| − | ** Disabled autoconnect on stop-network call
| |
| − | ** Fixed Hotspot login via landing page issue
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27===
| |
| − | | |
| − | * Improvements:
| |
| − | ** Added ping to DNS IPv6 support
| |
| − | ** Added modem reset to default state after device FW upgrade
| |
| − | ** Modem init now checks NVRAM sensitive commands before setting
| |
| − | ** GSM output was made consistent
| |
| − | ** Updated FSTools package to version 2022-05-03
| |
| − | ** Added security headers to web requests
| |
| − | | |
| − | * Fixes:
| |
| − | ** Fixed CVE-2019-12900 libbz2 vulnerability
| |
| − | ** Fixed behavior of some gsmctl commands
| |
| − | ** Fixed CVE-2022-23303 hostapd vulnerability
| |
| − | ** Fixed CVE-2022-29581 Linux kernel vulnerability
| |
| − | ** Fixed CVE-2022-29458 ncurses vulnerability
| |
| − | ** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
| |
| − | ** Fixed band locking issue
| |
| − | ** Fixed race condition for wireless configuration initialization
| |
| − | ** Fixed operator control issue
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06===
| |
| − | | |
| − | * Improvements:
| |
| − | ** Improved GSM related messages in Troubleshoot logs
| |
| − | | |
| − | * Fixes:
| |
| − | ** Fixed IGMP Proxy menu item not appearing after package installation
| |
| − | ** Fixed default mobile network configuration generation
| |
| − | ** Fixed MODBUS write requests and Mobile Utils option setting
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23===
| |
| | | | |
| | * <b>New features</b> | | * <b>New features</b> |
| − | ** Overview side widget | + | ** New WebUI style |
| − | ** IGMP Proxy | + | ** Load Balancing Rules |
| − | ** Privileged Access Management (PAM) | + | ** Wireless mesh network support |
| − | ** AWS Greengrass support
| + | ** Multiple Wireless AP feature |
| − | ** HTTPS certificate and key upload feature | + | ** Tinc VPN |
| − | ** SSH public keys edit box | + | ** German language support |
| − | ** License page
| + | ** Manual-Auto operator select |
| − | ** DNP3 data for Data to Server
| + | ** SLM750-VJ&VSA modem support |
| − | | + | ** B18 and B19 LTE band support |
| − | * <b>Improvements</b>
| |
| − | ** Updated busybox to version: 1.34.1
| |
| − | ** Updated curl to version 7.79.1
| |
| − | ** Added iptables filter package for string filtering
| |
| − | ** Added CHAP authentication for L2TP VPN
| |
| − | ** Added IPv6 support for L2TPv3 VPN | |
| − | ** Added EAP-MSCHAPV2 authentication method for IPsec VPN | |
| − | ** Added IPv6 support to Auto Reboot
| |
| − | ** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page | |
| − | ** Updated SNMP version 5.9.1
| |
| − | ** Added OpenSSL authentication options to SNMPv3
| |
| − | ** Added support for OSPF redistribution options and OSPF neighbors
| |
| − | ** Added password field to BGP Peers page
| |
| − | ** Extended BGP "AS" field validation to accept integers up to 4294967295
| |
| − | ** Added "DHE+RSA" to OpenVPN cipher selections
| |
| − | ** Increased OpenVPN max password length from 128 bytes to 512 bytes
| |
| − | ** Made HMAC key direction initial value dependent on the role of the instance (client or server)
| |
| − | ** Made HMAC key and HMAC authentication key upload fields required
| |
| − | ** Added DES to IPsec encryption algorithms selections
| |
| − | ** Added special character support for CHAP secrets
| |
| − | ** Added validation requirements for PPTP user list username field
| |
| − | ** Added option to manually enter Public key in Wireguard configuration
| |
| − | ** Made generating Wireguard keys possible only while in auto mode
| |
| − | ** Added Events Log database to troubleshoot archive
| |
| − | ** Added RFC1918 filter field
| |
| − | ** Added the possibility to unblock multiple blocked devices at once
| |
| − | ** Added 'Port' column to blocked login attempts table
| |
| − | ** Added Speedtest server refresh
| |
| − | ** Updated Speedtest server list
| |
| − | ** Added asterisk option to Site Blocking
| |
| − | ** Added MD5 and SHA256 checksums to package validation page
| |
| − | ** Changed certificate requirements to only require client key file if client certificate is used
| |
| − | ** Added pagination and data retention between table pages
| |
| − | ** Added pagination functionality to tables when there are more than 10 records
| |
| − | ** Improved table sorting by saving user provided sort settings in the browser
| |
| − | ** Improved drag and drop functionality
| |
| − | ** Added the possibility to drag and drop files onto upload components
| |
| − | ** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
| |
| − | ** Added 'Strict-Transport-Security' response header for HTTPS
| |
| − | ** Added 'breadcrumbs' to modal windows
| |
| − | ** Improved initial WebUI loading after login
| |
| − | ** Added mobile bytes sent and bytes received SNMP OIDs
| |
| − | ** Added mobile LED turn off feature ('System -> Administration' page)
| |
| − | ** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
| |
| − | ** Updated mobile usage data point calculation logic
| |
| − | ** Added the possibility to manually enter operator number
| |
| − | ** Improved obtain mobile cell ID process
| |
| − | ** Added modem restart if SIM card is removed during APN database fetching process
| |
| − | ** Added unauthorized call logging
| |
| − | ** Added space character support in SMS commands
| |
| − | ** Disabled SMS modem storage configuration form when SIM is not inserted
| |
| − | ** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
| |
| − | ** Added external modem SMS limit Overview card and widget
| |
| − | ** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
| |
| − | ** Added duplicate value check for list configuration options
| |
| − | ** Changed mobile card instance design
| |
| − | ** Fixed 'Mobile Data usage reset' SMS rule
| |
| − | ** Fixed the default state parameter of SMS list POST/GET command
| |
| − | ** Added Hotspot configuration profiles
| |
| − | ** Added local Hotspot user password hashing
| |
| − | ** Added Hotspot password encoding option
| |
| − | ** Improved Hotspot related firewall rule setting
| |
| − | ** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
| |
| − | ** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
| |
| − | ** Added ubus support to Hotspot
| |
| − | ** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
| |
| − | ** Added I/O SNMP trap
| |
| − | ** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
| |
| − | ** Added device name parameter '%pc' to I/O Juggler
| |
| − | ** Added PPPoE VLAN priority support
| |
| − | ** Made VRRP ping section dependent on main instance
| |
| − | ** Added 'WAN to LAN' switch
| |
| − | | |
| − | * <b>Fixes</b>
| |
| − | ** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
| |
| − | ** Fixed CVE-2022-28391 busybox vulnerability
| |
| − | ** Fixed CVE-2018-16789 shellinabox vulnerability
| |
| − | ** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
| |
| − | ** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
| |
| − | ** Fixed zlib backport security issue
| |
| − | ** Fixed Wireguard firewall zone assignment
| |
| − | ** Fixed queued packages disappearing from list after FW upgrade with keep settings
| |
| − | ** Fixed error message display for multiple input validation rules
| |
| − | ** Fixed incorrect DHCP validation range for start and limit fields
| |
| − | ** Removed 'Bring up on boot' option from network interface configuration pages
| |
| − | ** Fixed coma-separated DHCP options disappearing after save
| |
| − | ** Fixed exclude and listen interfaces
| |
| − | ** Fixed 'Use broadcast flag' option saving
| |
| − | ** Fixed firewall zone assignment when creating new interfaces
| |
| − | ** Fixed OpenVPN 'Netmask' and 'IP address' field validations
| |
| − | ** Fixed OpenVPN TAP configuration saving issue
| |
| − | ** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
| |
| − | ** Fixed dynamic BGP route state display
| |
| − | ** Fixed BGP peer enable in edit page
| |
| − | ** Fixed issue when no L2TP client instance could be bound to IPsec
| |
| − | ** Fixed firewall rule and zone behavior related to config section creation
| |
| − | ** Added default value for L2TPv3 netmask, which is now written to config after save
| |
| − | ** Fixed passthrough option saving to IPsec file
| |
| − | ** Fixed DMVPN issue where instance configuration could not be saved
| |
| − | ** Fixed Wireguard peer could not be saved issue
| |
| − | ** Fixed NTP client time synchronization after factory reset
| |
| − | ** Fixed device time display with selected time zone
| |
| − | ** Fixed MODBUS TCP indexation missing bracket issue
| |
| − | ** Fixed initial MODBUS TCP request count validation
| |
| − | ** Fixed PIN 3/4 direction switching over MODBUS TCP
| |
| − | ** Fixed MODBUS data to MQTT socket closing issue when connection fails
| |
| − | ** Fixed MODBUS alarm configuration deletion
| |
| − | ** Fixed DNP3 master not working after FW upgrade with 'keep settings'
| |
| − | ** Fixed DNP outstation not returning error messages
| |
| − | ** Added missing SNMP objects: mobile IP, data sent/received today
| |
| − | ** Fixed MQTT Publisher 'Remote address' field validation
| |
| − | ** Fixed long interface name support for Azure IoT Hub
| |
| − | ** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
| |
| − | ** Fixed missing sent/received data issue
| |
| − | ** Fixed URL input field length validation
| |
| − | ** Fixed admin login issue after upload of backup from a device with older firmware versions
| |
| − | ** Fixed MAC address formatting in Events reporting messages
| |
| − | ** Fixed Events reporting DHCP lease message spam, when no new lease is added
| |
| − | ** Fixed logging crashing after downloading Troubleshoot file
| |
| − | ** Made Wake on LAN visible only on devices with Ethernet ports
| |
| − | ** Fixed Traffic log file transfer to FTP server
| |
| − | ** Fixed Web Filter service reloading after a host list file is uploaded
| |
| − | ** Fixed access denied messages when sending JSON-RPC requests from root user
| |
| − | ** Fixed error message display about duplicated intervals in Profile scheduler
| |
| − | ** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
| |
| − | ** Corrected OSPF Routing card values, value positions and names
| |
| − | ** Fixed global secret instances not being removed when there are no IPsec instances
| |
| − | ** Fixed uploaded file remove icon not staying in position on hover
| |
| − | ** Fixed Overview card collapse issue that made it unresponsive after too many clicks
| |
| − | ** Removed WAN6 interface from the Overview page
| |
| − | ** Fixed mobile IPv6 display in Events Reporting status messages
| |
| − | ** Fixed Bridge mode when DNS2 is not available | |
| − | ** Fixed PAP/CHAP username and password fields not saving in interface edit window
| |
| − | ** Fixed sending email without secure connection for providers that support such an option
| |
| − | ** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
| |
| − | ** Fixed Call Utilities Events Log message for reboot rule
| |
| − | ** Fixed SMS command validation for no-authorization option
| |
| − | ** Fixed MODBUS SMS alarms 'Enable' option saving
| |
| − | ** Fixed running RMS with no SIM card inserted issue
| |
| − | ** Fixed firmware available on server version checking issue
| |
| − | ** Fixed CVE-2020-15078 openvpn vulnerability
| |
| − | ** Fixed storage calculation for packages
| |
| − | ** SMS Utilities: enhanced service security
| |
| − | ** Fixed firmware deletion after leaving the page
| |
| − | ** Fixed setup wizard redirect after LAN IP change
| |
| − | ** Fixed various validation bugs, typos, option hints & alignments
| |
| − | ** Fixed multiple IPv6 configuration field validations
| |
| − | ** Fixed PDP logging for Verizon operator
| |
| − | ** Added multiwan support for Wireguard default route
| |
| − | ** Fixed wireless signal strength display when no clients are connected
| |
| − | ** Fixed loss of connectivity for clients when router is in STA+AP mode
| |
| − | ** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
| |
| − | ** Fixed Wifi Scanner data not being stored in certain scenarios
| |
| − | ** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
| |
| − | ** Fixed Hotspot user group limit not resetting on specified time
| |
| − | ** Removed an RMS error message when no Hotspot users were created
| |
| − | ** Fixed Hotspot landing page image upload issue
| |
| − | ** Fixed relay output value display in I/O Juggler condition page
| |
| − | ** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
| |
| − | ** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
| |
| − | ** Fixed I/O Juggler's incorrect I/O status messages
| |
| − | ** Fixed APN migration if APN was selected from APN list on legacy firmware
| |
| − | ** Fixed RIP configuration migration from legacy firmware versions
| |
| − | ** Fixed Wireguard interface status setting migration from legacy firmware versions
| |
| − | ** Fixed default config options for SSH and Web access SMS Utilities rules
| |
| − | | |
| − | ===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25===
| |
| | | | |
| | * <b>Improvements</b> | | * <b>Improvements</b> |
| − | ** Increased Port Forwards rule max name length | + | ** Improved WebUI functionality when multiple browser tabs are open |
| − | ** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler | + | ** Updated base to OpenWrt version 21.02 |
| | + | ** Updated kernel to version 5.4.141 |
| | + | ** Updated mtd-utils to version 2.1.2 |
| | + | ** Updated busybox to version 1.33.1 |
| | + | ** Updated ubus to version 2021-06-3 |
| | + | ** Updated ubox to version 2020-10-25 |
| | + | ** Updated rpcd to version 2021-03-11 |
| | + | ** Updated opkg to version 2021-06-13 |
| | + | ** Updated fstools to version 2021-01-04 |
| | + | ** Updated wwan to version 2019-04-29 |
| | + | ** Updated ethtool to version 5.10 |
| | + | ** Updated uhttpd to version 2021-03-21 |
| | + | ** Updated ppp to version 2020-10-03 |
| | + | ** Updated odhcpd to version 2021-07-18 |
| | + | ** Updated hostapd to version 2020-06-08 |
| | + | ** Updated dropbear to version 2020.81 |
| | + | ** Updated dnsmasq to version 2.85 |
| | + | ** Updated netifd to version 2021-07-26 |
| | + | ** Updated firewall3 to version 2021-03-23 |
| | + | ** Updated libjson-c to version 0.15 |
| | + | ** Updated libevent2 to version 2.1.12 |
| | + | ** Updated mac80211 to version 5.10.42-1 |
| | + | ** Updated wireless-regdb to version 2021.04.21 |
| | + | ** Updated binutils to version 2.35.1 |
| | + | ** Updated gdb to version 10.1 |
| | + | ** Updated strace to version 5.10 |
| | + | ** Updated trace-cmd to version 2.9.1 |
| | + | ** Updated valgrind to version 3.16.1 |
| | + | ** Updated ath10k-ct-firmware to version 2020-11-08 |
| | + | ** Updated procd to version 2021-02-23 |
| | + | ** Updated iw to version 5.9.8 |
| | + | ** Updated iproute2 to version 5.11.0 |
| | + | ** Updated iptables to version 1.8.7 |
| | + | ** Updated nettle to version 3.6 |
| | + | ** Updated libpcap to version 1.9.1 rel3 |
| | + | ** Updated elfutils to version 0.180 |
| | + | ** Updated cryptodev-linux to version 1.11 |
| | + | ** Updated linux-firmware to version 20201118 |
| | + | ** Updated util-linux to version 2.36.1 |
| | + | ** Updated openwrt-keyring to version 2021-02-20 |
| | + | ** Updated mtd to version rel26 |
| | + | ** Updated fwtool to version 2019-11-12 |
| | + | ** Updated ca-certificates to version 20210119 |
| | + | ** Updated wireguard-tools to version 1.0.20210223 |
| | + | ** Updated iwinfo to version 2021-04-30 |
| | + | ** Updated ipset to version 7.6 |
| | + | ** Updated gre to version rel12 |
| | + | ** Updated wolfssl to version 4.7.0 |
| | + | ** Updated ustream-ssl to version 2020-12-10 |
| | + | ** Updated uclient to version 2021-05-14 |
| | + | ** Updated readline to version 8.1 |
| | + | ** Updated mbedtls to version 2.16.11 |
| | + | ** Updated libusb to version 1.0.24 |
| | + | ** Updated libunwind to version 1.5.0 |
| | + | ** Updated libubox to version 2021-05-16 |
| | + | ** Updated libnl-tiny to version 2020-08-05 |
| | + | ** Updated libnftnl to version 1.1.8 |
| | + | ** Updated libiconf-full to version 1.16 |
| | + | ** Updated libbsd to version 0.10.0 |
| | + | ** Updated gmp to version 6.2.1 |
| | + | ** Updated ulogd to version rel6 |
| | + | ** Updated sqm-scripts to version 1.5.0 |
| | + | ** Updated ntpclient to version rel14 |
| | + | ** Updated nmap to version 7.80 |
| | + | ** Updated curl to version 7.77.0 |
| | + | ** Updated zerotier to version 1.6.5 |
| | + | ** Updated xtables-addons to version 3.13 |
| | + | ** Updated xl2tpd to version 1.3.16 |
| | + | ** Updated stunnel to version 5.59 |
| | + | ** Updated strongswan to version 1.0.13 |
| | + | ** Updated sstp-client to version 1.0.13 |
| | + | ** Updated pptpd to version rel5 |
| | + | ** Updated openvpn to version 2.5.3 rel2 |
| | + | ** Updated ntpd to version rel3 |
| | + | ** Updated net-snmp to version rel2 |
| | + | ** Updated mosquitto to version 2.0.11 |
| | + | ** Updated miniupnpd to version 2.2.1 rel 3 |
| | + | ** Updated etherwake to version rel5 |
| | + | ** Updated libzip to version 1.7.3 |
| | + | ** Updated libgpg-error to version 1.39 |
| | + | ** Updated glib2 to version 2.66.4 |
| | + | ** Updated libnetfilter-conntrack to version 1.0.8 |
| | + | ** Updated libnetfilter-log to version rel3 |
| | + | ** Updated lzo to version rel4 |
| | + | ** Updated nghttp2 to version 1.43.0 |
| | + | ** Updated openvpn-easy-rsa to version 3.0.8 rel3 |
| | + | ** Updated iperf to version rel2 |
| | + | ** Updated iperf3 to version 3.10.1 |
| | + | ** Updated e2fsprogs to version 1.45.6 |
| | + | ** Updated fuse to version 2.9.9 |
| | + | ** Updated udprelay to version 2020-02-26 |
| | + | ** Updated qmicli to version 1.28.2 |
| | + | ** Updated pcre to version 8.45 |
| | + | ** Updated libsmpp34 to version 1.14.1 |
| | + | ** Updated libiwinfo to version 2.1 |
| | + | ** Added netifd library for additional information related to network interfaces |
| | + | ** Updated openssl to version 1.1.1l |
| | + | ** Updated privoxy to version 3.0.32 |
| | + | ** Added ACL reload method for sessions |
| | + | ** Added 'Advertisement interval' field to the VRRP configuration window |
| | + | ** Added a PPTP-to-WAN Zone Forwarding rule when default route is enabled on PPTP client |
| | + | ** Added email user group validation for sendind test emails with Events reporting |
| | + | ** Added an event logging feature for Ping Reboot events |
| | + | ** Improved file/section deletion logic: now files are also deleted after deleting a related config section |
| | + | ** Improved package deletion logic |
| | + | ** Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance |
| | + | ** Updated 'External system log server' field validation to accept IPv6 addresses |
| | + | ** Added redirect to Overview page after login |
| | + | ** Added WebUI session timeout after user inactivity |
| | + | ** Added placeholder text to dropdown menus |
| | + | ** Improved multi-select design and functionality |
| | + | ** Added Unix timestamp, local ISO time, UTC time to Modbus |
| | + | ** Added info message when selected file cannot be uploaded |
| | + | ** Improved IPsec throughtput |
| | + | ** Added IPSec "Compatibility mode" configuration support |
| | + | ** Made SNMP 'Community name' option editable |
| | + | ** Added the option to delete configurations to the SMS Utilities 'UCI' rule |
| | + | ** Added 'hour', 'week day', 'month day' slelection options to SMS Limit configuration |
| | + | ** Added Lithuanian and Verizon APNs |
| | + | ** Added modem selection for the 'Send SMS' option in Auto Reboot settings |
| | + | ** Added the possibility to get total data usage value without specifying time interval via ubus |
| | + | ** Added new configuration options to the Failover feature |
| | + | ** Changed Failover page availability from Advanced only both advanced and basic |
| | + | ** Made Failover Interfaces table rows draggable when in 'Load Balancing' mode |
| | + | ** Changed Failover page 'Ratio' fields to a smaller size |
| | + | ** Added I/O support to SNMP |
| | + | ** Removed ubus list method due to security reasons |
| | + | ** Added MODBUS "%I, %T, %S, %r, %n" support to MODBUS Data Sender |
| | + | ** Removed search engine site crawling |
| | + | ** Improved IPSec "Local/Remote source" validation |
| | + | ** Added Firewall "all" and "custom" protocol options |
| | + | ** Added Backup file size limit of 2 MB |
| | + | ** Improved basic/advanced mode changing |
| | + | ** Improved Wireguard "IP Addresses" field validation |
| | + | ** Added language download support from language selection section |
| | + | ** Added PPTP "Client to client" configuration support |
| | + | ** Made DDNS "username", "password", "host" fields optional |
| | + | ** Added SSTP "Default route" configuration support |
| | + | ** Added SMS Limit hour, week day and month day support |
| | + | ** Added Passthrough "Leasetime" and "Unit" configuration support |
| | + | ** Added Call Utilities "Active Timeout" configuration support |
| | + | ** Added I/O action support MODBUS Alarms |
| | + | ** Added bgscan feature to wpa_supplicant |
| | + | ** Optimized Wireless device status information requests in all WebUI pages |
| | + | ** Added "Topology state" support to Events Reporting |
| | | | |
| | * <b>Fixes</b> | | * <b>Fixes</b> |
| − | ** Added missing bracket to the end of MODBUS messages | + | ** Made RMS 'Connect' button disabled when a connection attempt is already in progress |
| − | ** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option | + | ** Added validation for TLS Clients 'Private network' option |
| − | ** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page | + | ** Fixed the validation range for MTU fields |
| − | ** Fixed firewall extra option validation | + | ** Fixed removing firmware image file after leaving the fimware upgrade page |
| − | ** Fixed Hotspot enable button validation | + | ** Fixed network selection list for Traffic Logging - added all available LAN networks |
| − | ** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
| + | ** Fixed DHCP Options validation |
| − | ** Changed the logic of uploading files to the modem | + | ** Fixed configuration profile date display |
| − | ** Fixed second mobile interface creation issue | + | ** Fixed blank page after invalid URL in login page |
| − | ** Fixed usage of custom headers in I/O Juggler HTTP action | + | ** Fixed TR-069 related firewall rule loading |
| − | ** Fixed 'verify' option parsing for I/O Juggler | + | ** Fixed remote subnet netmask validation issues for the GRE Tunnel configuration |
| − | ** Fixed OpenVPN server configuration with password authentication | + | ** Fixed WebUI section toggle |
| − | ** Fixed NTP interval length validation | + | ** Fixed package installation modal layout |
| − | ** Fixed network interface enable after Drag & Drop | + | ** Fixed current page values showing up in login page username field |
| − | ** Updated NTP client interval to 24h | + | ** Fixed the possibility to create section with a name that is already in use in the same config file |
| − | ** Fixed connection to whitelist carriers | + | ** Fixed OpenVPN username and password deletion when deleting configuration instance |
| − | ** Fixed Passthrough mode when DHCP is disabled | + | ** Fixed session closing issue for the user whose password was just changed |
| − | ** Fixed 'Deny data roaming' feature | + | ** Updated MODBUS credential validation |
| − | ** Fixed mobile blocking dependency on region | + | ** Updated MQTT credential validation |
| − | ** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled | + | ** Fixed DNS 'Rebind protection' setting when switch is disabled |
| − | | + | ** Updated libgcrypt to version 1.9.3 to fix CVE-2021-33560 |
| − | ===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04===
| + | ** Fixed CVE-2021-33624, CVE-2021-29648 vulnerabilities |
| − | | + | ** Fixed DHCP 'Lease time' and 'Unit' option saving over the Setup Wizard LAN page |
| − | * <b>New features</b> | + | ** Fixed Reboot Scheduler not removing crontab file after disabling the rule |
| − | ** DFOTA modem upgrade system for Quectel modems | + | ** Fixed OpenVPN 'Extra options' field validation to allow a space character |
| − | | + | ** Added table drag and drop functionality to the Firewall's Traffic Rules page |
| − | * <b>Improvements</b> | + | ** Fixed DNP3 Outstation crash caused by non-void function returning no value |
| − | ** Removed L2TP section title prefixes | + | ** Fixed RMS 'Copy' button functionality |
| − | {{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}}
| + | ** Fixed gsmd deamon crashing after modem restart |
| − | * <b>Fixes</b> | + | ** Fixed gsm memory leak |
| − | ** Fixed IPSec crashing issue using mobile | + | ** Fixed WCDMA band names for MEIG modules |
| − | ** Fixed FW flashing when chip is in unknown state | + | ** Fixed SMS Gateway loading screen issue when sending an SMS message |
| − | ** Fixed CPU usage percentage display in the Overview page | + | ** Fixed mobile data database error after upgrading firmware with the 'Keep settings' option |
| − | ** Fixed FOTA timeout issue when server does not respond | + | ** Fixed rpcd memory leak issue |
| − | ** Fixed installation of backup packages | + | ** Fixed network information gathering |
| − | ** Fixed mobile data limit display after profile change | + | ** Fixed 3G LED not being active in 3G mode |
| − | ** Fixed Bridge mode without multi-APN | + | ** Fixed data limit accuracy issue |
| − | ** Fixed multi mobile interface checking | + | ** Fixed incorrect loading after saving Failover configuration |
| − | ** Fixed error handling when the modem is not responding | + | ** Fixed I/O Juggler hour condition interval issue |
| − | ** Prolonged autoconnect setting timeout | + | ** Removed 'Memory Expansion' and 'Printer Server' from the Status -> Services page |
| − | | + | ** Patched CVE-2021-40528 vulnerability |
| − | ==='''RUT2_R_00.07.01''' | 2021.11.18===
| + | ** Patched CVE-2021-40490 vulnerability |
| − | <b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
| + | ** Patched CVE-2020-16120 vulnerability |
| − | ---- | + | ** Fixed VLAN section creation |
| − | * <b>New features</b> | + | ** Returned Interfaces "Port priority" option |
| − | ** RUTOS WebUI | + | ** Fixed missing Content-Type header to initial WebUI response |
| | + | ** Fixed RIP information parsing in status page |
| | + | ** Fixed OpenVPN IPv6 netmask validation |
| | + | ** Fixed SNMP Trap Settings Host/IP field validation |
| | + | ** Fixed Cumulocity authentication reset |
| | + | ** Fixed Events Reporting rule saving |
