Template:Fw checksum cli: Difference between revisions

Latest revision as of 15:38, 5 January 2022

You can calculate the checksum of a firmware image file using md5sum. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a command line interface.

When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into /tmp/ directory with the name firmware.img. So the command to calculate the checksum should look like this:

Revision as of 16:36, 11 September 2018 (view source) Dziugas (talk \| contribs) (Created page with "You can calculate the checksum of a firmware image file using '''md5sum'''. When you select a firmware image file for upload via the System -> Firmware page, the file gets upl...")		Latest revision as of 15:38, 5 January 2022 (view source) Dziugas (talk \| contribs) No edit summary
(3 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	You can calculate the checksum of a firmware image file using ~~'''~~md5sum~~'''~~. When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into ~~'''''~~/tmp/~~'''''~~ directory with the name ~~'''''~~firmware.img~~'''''~~. So the command to calculate the checksum should look like this:		You can calculate the checksum of a firmware image file using <i>md5sum</i>. This command should work on most Linux distros or you can upload the firmware into the router and calculate the checksum via a [[Command line interfaces\|command line interface]].

			When you select a firmware image file for upload via the System -> Firmware page, the file gets uploaded into <i>/tmp/</i> directory with the name <i>firmware.img</i>. So the command to calculate the checksum should look like this: