Template:Networking rut9m manual input output status: Difference between revisions

Revision as of 08:37, 13 January 2022

ioman.gpio.din1    - 4PIN input
ioman.gpio.dout1   - 4PIN output

Call command ubus call value status :

root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}

din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.

@@ Line 1: / Line 1: @@
-{{#switch:{{{name}}}|RUT956|RUT906|RUT976=
+{{#ifeq:{{{name}}}|RUT956|
 <pre>
 ioman.gpio.din1    - 4PIN input
@@ Line 9: / Line 9: @@
 ioman.adc.adc0     - Analog input
 ioman.acl.acl0     - Analog Current loop
-</pre>|#default=
+</pre>|
 <pre>
 ioman.gpio.din1    - 4PIN input
@@ Line 37: / Line 37: @@
              <li>"value": "<b>1</b>" means high level state.</li>
          </ul>
-     </li>{{#switch:{{{name}}}|RUT956|RUT906|RUT976=
+     </li>{{#ifeq:{{{name}}}|RUT956|
      <li><b>relay0</b> is the relay:
          <ul>
@@ Line 43: / Line 43: @@
              <li>"state": "<b>closed</b>" means closed relay state.</li>
          </ul>
-     </li>|#default=}}
+     </li>|}}
 </ul>
-{{#switch:{{{name}}}|RUT956|RUT906|RUT976=
+{{#ifeq:{{{name}}}|RUT956|
 To change relay settings, use the <i><b>update</i></b> command and specify a state:
   ubus call ioman.relay.relay0 update '{"state":"open"}'
   ubus call ioman.relay.relay0 update '{"state":"closed"}'
-|#default=}}
+|}}