RUT241 Data to Server: Difference between revisions

From Teltonika Networks Wiki
No edit summary
m (Gytispieze moved page Draft:RUT241 Data to Server to RUT241 Data to Server without leaving a redirect)
(5 intermediate revisions by 3 users not shown)
Line 6: Line 6:
| bluetooth = 0
| bluetooth = 0
| wifi      = 1
| wifi      = 1
| mobile    = 1
| mobile_usage = 1
| MNF = 1
| MQTT = 1
| DLMS = 1
| DNP3 = 1
| Modbus = 1
| OPC = 1
}}
}}

Revision as of 13:16, 13 January 2022

Main Page > RUT Routers > RUT241 > RUT241 Manual > RUT241 WebUI > RUT241 Services section > RUT241 Data to Server

The information in this page is updated in accordance with firmware version RUT2M_R_00.07.10.


Summary

The Data to Server feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Data Senders

A Data Sender is an instance that gathers and periodically sends collected data to a specified server. The Data Senders list is empty by default so, in order to begin configuration you must add a new data sender first. To add a new data sender, click the 'Add' button.

After this you should be redirected to the newly added data sender's configuration page.

Sender Settings


Refer to the table below for descriptions on data sender configuration fields.

Note: these tables have coloring schemes to indicate which fields can be seen with different configuration.

General

Field Value Description
Name string; default: none Name of the data sender. Used for easier data senders management purposes only (optional).
Type Base | Lua script | Wifi scanner* |  ; default: Base Source of the data to be sent to server.
Format type Json | Custom; default: Json Arranges the format of the sent JSON segment.
Format string string; default: none Specifies custom format string.
Empty value string; default: N/A A string which will be placed if any value cannot be received.
Delimeter string (Maximum length of value is 1 bytes); default: N/A Specifies delimiters for multiple data segments.
Segment count integer [1..64]; default: 1 Max segment count in one JSON string sent to server.
Send as object off | on; default: off When turned on, sends JSON segment as object and not as an array element.
Data filtering All | Name | MAC address | Signal strength; default: All If Data type: Wifi scanner. Choose which data this sender will send to server.


* This is additional software that can be installed from the System → Package Manager page.

Collection settings


Field Value Description
Enabled off | on; default: on Enables data to server collection instance.
Format type JSON | custom; default: JSON Data collection objects formatting.
Format string Default: Instance name Specifies custom format string
Empty value Default: N/A A string which will be placed if any value cannot be received
Period Default: 60 Interval in seconds for collecting/sending data to destination.
Retry off | on; default: off In case of a failed attempt, retry to send the same data to destination later.
Retry count Default: 10 Retry to send the same data N times
Timeout Default: 1 Timeout in second between retry attempts

Server configuration


Field Value Description
Type HTTP ; default: HTTP Interval in seconds for collecting/sending data to destination.
Server address Default: empty Hostname or IP address of the broker to connect to.
HTTP headers Default: empty Allows to add custom headers to the HTTP requests.
Enable secure connection on | off; default: off Enables the use of TLS certificates.
Enable secure connection off | on; default: off Enables the use of TLS certificates.
Certificate files from device off | on; default: off Specify where the certificates will be used from.
Certificate authority file .ca file; default: none Certificate authority is an entity that issues digital certificates. A digital certificate certifies the ownership of a public key by the named subject of the certificate.
Client Certificate .crt file; default: none Certificate file is a type of digital certificate that is used by client systems to make authenticated requests to a remote server. If client certificate is not needed, leave both client certificate and client key fields empty.
Client Private Keyfile .key file; default: none File containing private key for this client. This file needs to be not encrypted.