Line 16: |
Line 16: |
| | | |
| The network architecture after the change would look as follows: | | The network architecture after the change would look as follows: |
− | [[File:RUT850 STA as LAN.png|600px|STA as LAN]]
| |
| | | |
− | Here are the steps to follow:
| + | [[File:RUT850 STA as LAN.png|800px|STA as LAN]] |
| + | |
| + | === Steps to follow === |
| | | |
| # Add the RUT850 to a existing WLAN access point as written in manual | | # Add the RUT850 to a existing WLAN access point as written in manual |
Line 25: |
Line 26: |
| | | |
| After the change of the security zone to LAN incoming packets are forwarded to internet. They are treated the same as the packets coming in from access point interface br-lan of RUT850. | | After the change of the security zone to LAN incoming packets are forwarded to internet. They are treated the same as the packets coming in from access point interface br-lan of RUT850. |
| + | |
| + | ===/etc/config/network === |
| + | Search for the station interface and change it from dhcp to a static IP in order to be able to use it as the gateway in the LAN segment it belongs to. I.e.: |
| + | config interface 'wan2' |
| + | option proto 'static' |
| + | option backup '0' |
| + | option ifname 'wlan0' |
| + | option ipaddr '192.168.2.254' |
| + | option netmask '255.255.255.0' |
| + | option enabled '1' |
| + | option disabled '0' |
| + | option metric '10' |
| + | |
| + | ===/etc/config/firewall === |
| + | Remove the interface wan2 from the WAN zone and add it to the LAN zone. i.e.: |
| + | |
| + | config zone |
| + | option name 'lan' |
| + | option network 'lan wan2' |
| + | option input 'ACCEPT' |
| + | option output 'ACCEPT' |
| + | option forward 'ACCEPT' |
| + | |
| + | config zone |
| + | option name 'wan' |
| + | option input 'REJECT' |
| + | option output 'ACCEPT' |
| + | option forward 'REJECT' |
| + | option masq '1' |
| + | option mtu_fix '1' |
| + | option network 'ppp wan' |
| + | |
| + | ===/etc/config/wireless === |
| + | No changes needed here. Just to show how the station mode wifi interface looks like |
| + | |
| + | config wifi-iface |
| + | option network 'wan2' |
| + | option encryption 'psk2' |
| + | option device 'radio0' |
| + | option key '>your password<' |
| + | option user_enable '1' |
| + | option mode 'sta' |
| + | option scan_sleep '10' |
| + | option ssid 'Maltron1-2.4' |
| + | |
| [[Category:Control & Configuration]] | | [[Category:Control & Configuration]] |