Wireless Mesh configuration example: Difference between revisions
No edit summary |
No edit summary |
||
| Line 37: | Line 37: | ||
<li>An interface configuration window will show up. In '''General Setup''' tab '''Enable''' interface, select Mode as '''Mesh''', and enter Mesh ID. '''Mesh ID Must be identical on all devices'''.</li> | <li>An interface configuration window will show up. In '''General Setup''' tab '''Enable''' interface, select Mode as '''Mesh''', and enter Mesh ID. '''Mesh ID Must be identical on all devices'''.</li> | ||
<li>In '''Wireless Security''' tab select Encryption '''WPA3 – SAE''' and enter the Password. '''The password must match on all devices'''.</li> | <li>In '''Wireless Security''' tab select Encryption '''WPA3 – SAE''' and enter the Password. '''The password must match on all devices'''.</li> | ||
<li>In '''Advanced Settings''' tab enable Forward mesh peer traffic and set RSSI threshold for joining to -80. Leave the rest as set by default.</li> | <li>In '''Advanced Settings''' tab enable Forward mesh peer traffic and set RSSI threshold for joining to '''-80'''. Leave the rest as set by default.</li> | ||
</ol> | </ol> | ||
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_1_v2.png|border|class=tlt-border]] | [[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_1_v2.png|border|class=tlt-border]] | ||
| Line 50: | Line 50: | ||
*Navigate to '''Network''' → '''Wireless'''. The mesh interface, in this case "1", shows the number of connected mesh nodes, which is 2. | *Navigate to '''Network''' → '''Wireless'''. The mesh interface, in this case "1", shows the number of connected mesh nodes, which is 2. | ||
[[File:Networking rutx11 configuration example wireless mesh test 1 v2.png|border|class=tlt-border]] | [[File:Networking rutx11 configuration example wireless mesh test 1 v2.png|border|class=tlt-border]] | ||
*A list of IP addresses leased by mesh gateway can be viewed by going to Status → Network → LAN. In the screenshot given IP addresses can be seen given to the two RUT routers as well as a device, connected to the access point. | *A list of IP addresses leased by mesh gateway can be viewed by going to '''Status''' → '''Network''' → '''LAN'''. In the screenshot given IP addresses can be seen given to the two RUT routers as well as a device, connected to the access point. | ||
[[File:Networking rutx11 configuration example wireless mesh test 2 v2.png|border|class=tlt-border]] | [[File:Networking rutx11 configuration example wireless mesh test 2 v2.png|border|class=tlt-border]] | ||
*Those IPs can be pinged from the mesh gateway despite the fact that there is no wired or mobile connection between the mesh nodes. | *Those IPs can be pinged from the mesh gateway despite the fact that there is no wired or mobile connection between the mesh nodes. | ||