Difference between revisions of "Network share using SAMBA"
From Teltonika Networks Wiki
m (Žilvinas moved page Draft:Network share using samba to Network share using SAMBA) |
Shivang.amin (talk | contribs) |
||
(43 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
+ | = Network Share using Samba = | ||
+ | Contents | ||
+ | |||
+ | 1 [[Introduction]] | ||
+ | |||
+ | 2 [[Prerequisites]] | ||
+ | |||
+ | 3 [[Instructions]] | ||
+ | |||
== Introduction == | == Introduction == | ||
− | This article provides information and step by step guide to configure samba share on Teltonika routers. | + | This article provides information and step by step guide to configure samba share on Teltonika routers and windows pc. |
The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. | The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. | ||
− | |||
− | |||
== Prerequisites == | == Prerequisites == | ||
− | You will need: | + | You will need: |
* RUTX router running FW version RUTX_R_00.07.01.4 or newer. | * RUTX router running FW version RUTX_R_00.07.01.4 or newer. | ||
* A computer running Windows OS. | * A computer running Windows OS. | ||
+ | |||
* A USB flash drive. | * A USB flash drive. | ||
== Instructions == | == Instructions == | ||
− | # Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or | + | # Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wirelessly. |
− | # Login to the router's | + | # Login to the router's webUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 18:04, 21 April 2022
Contents
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers and windows pc.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wirelessly.
- Login to the router's webUI, go the Services → USB Tools → General page and verify if your USB is mounted.